PL-C - vendo.hu COMPACT & EASY TO ... Moduler frame construction Reduced and easy installation time...
Transcript of PL-C - vendo.hu COMPACT & EASY TO ... Moduler frame construction Reduced and easy installation time...
PL-CCOMPACT & EASY TO UPGRADE OF CAPACITY
For more information please contact us
PLASMA CUTTING MACHINESWHAT IS THE AMAZING NEWS FOR PL-C?
Compact style bodies connected to each other and create bigger size machines easilyModuler frame constructionReduced and easy installation timeFilter capacity decreased by controlling gas suction canals according to cutting area. (12000m3/h-7000m3/h)Cutting table strips can be fixed easly to the machine framevGas suction doors covers are now half pneumatic and creates better flowLinear guide and helix rack & pinion used to enhance cutting precisionBy using wheel system on bridge gives advantage to eliminate guide, guide car and bellowDURMA THC system makes the height control and operate PL+ OCMagnetic breakaway systemDURMA software improved with Beckhoff control unitDURMA height control improved with Beckhoff control unit
Durma new generatin plasma cutting machines will be available after MAY 2014
PL-C 1530PL-C 2040PL-C 2060PL-C 20120PL-C 2580PL-C 25120PL-C 3080PL-C 30120PL-C 30140PL-C 40120
OUR NEW SERIESPLASMA CUTTING MACHINES
HYPERTERM POWER SOURCE
STANDARD FEATURES
OPTIONS
Single head plasmaPlasma + oxygen cutting (Oxygen max 120mm)Manuel angle cutting adaptation (±45°)CNC 5 axis bevel cutting headSingle drilling (Ø20 – M16)1-4 drilling headProfile cutting min Ø50 x (Ø250-Ø400-Ø600), length max.6000mm
Welded steel construction Durma CNC control Unit Remote control diagnostic (Ethernet)Lantek Software with Auto nestingCutting plate alignment by Laser Durma Torch height controlTwo side motion control system (Rack & pinion)AC Servomotors for X & Y axes motionFixed CNC control panelCNC control outputs/inputs for filter unitConsumables starting kitHypertherm plasma torchIgnition consoleTorch height control travel with ballscrew on dual linear guides
PLASMA CUTTING FEATURES AND OPTIONSManuel Angle Cutting Adaptation ±45° (right-left; front-back)
PLASMA + OXY CUTSingle Height Control
Automatic Torch Height ControlCNC CONTROLLED 5 AXIS BEVEL CUTTING HEAD
A axis angle ±45°B axis angle ±45°Protection for collision
Compact cutting head settings for plasma torch and oxi torch.
Easy to select manually plasma or oxy head with magnetic slot
Durma manuel bevel head as a standard features
SINGLE DRILLING HEAD
1-4 DRILLING HEADSingle Height Control
PROFILE CUTTING UNIT
Ø50 - Ø250Ø50 - Ø400Ø50 - Ø600Support system at every 3 metersBox profile support system
Drilling capacity : Ø20 Tapping : M16 Tool holder : BT40
Drilling capacity : Ø20 Tapping : M16 Tool holder : BT40
PLASMA CUTTING
AVAILABLE CONFIGURATIONS FOR SALE
PLPL + DRILLINGPL + PIPE & PROFILE CUTTINGPL + DRILLING + PIPE & PROFILE CUTTINGPL + OCPL + OC + DRILLINGPL + OC + PIPE & PROFILE CUTTINGPL + OC + DRILLING + PIPE & PROFILE CUTTINGBEVEL CUTTING (CNC 5 AXIS)BEVEL CUTTING + DRILLINGBEVEL CUTTING + PIPE & PROFILE CUTTINGBEVEL CUTTING + DRILLING + PIPE & PROFILE CUTTINGBEVEL CUTTING + OCBEVEL CUTTING + OC + DRILLING BEVEL CUTTING + OC + PIPE & PROFILE CUTTINGBEVEL CUTTING + OC + DRILLING + PIPE & PROFILE CUTTING
PLASMA CUTTING + DRILLING
PLASMA CUTTING + PIPE & PROFILE CUTTING
PLASMA CUTTING + DRILLING + PIPE & PROFILE CUTTING
PLASMA CUTTING + OXY CUTTING
PLASMA CUTTING + OXY CUTTING + PIPE & PROFILE CUTTING
PLASMA CUTTING + OXY CUTTING + DRILLING
PLASMA CUTTING + OXY CUTTING + PIPE & PROFILE CUTTING + DRILLING
BEVEL CUTTING (5 AXIS)
BEVEL CUTTING + PIPE & PROFILE CUTTING
BEVEL CUTTING + DRILLING
BEVEL CUTTING + OXY CUTTING
BEVEL CUTTING + DRILLING + PIPE & PROFILE CUTTING
BEVEL CUTTING + OXY CUTTING + PIPE & PROFILE CUTTING
BEVEL CUTTING + OXY CUTTING + DRILLING
BEVEL CUTTING + OXY CUTTING + DRILLING + PIPE & PROFILE CUTTING