PK225U
-
Upload
louisville-ladder-inc -
Category
Documents
-
view
213 -
download
0
description
Transcript of PK225U
Louisville Customer Care 1(800) 666-2811
www.louisvilleladder.com Louisville Ladder Corp. 7765 National Turnpike Unit 190 Louisville KY 40214
2 of 2
KIT # PK225U
SPREADER BRACE KIT
WARNING: BEFORE INSTALLATION BE SURE THE SPREADER BRACES MATCH THE SPREADER
BRACE ON YOUR LADDER
QUANTITY
1
1
8
8
8
DESCRIPTION
LEFT SPREADER BRACE
RIGHT SPREADER BRACE
LOCKNUT ¼”
BOLT ¼” X ¾”
WASHER ¼”
PART #
FE956-03-63
FE956-04-63
F4498-63
F1881-63
F0289-63
THE FOLLOWING PARTS ARE INCLUDED IN THIS PACKAGE.
PLEASE CONTACT CUSTOMER SERVICE IF ANY PARTS ARE MISSING
DRAWING
Louisville Customer Care 1(800) 666-2811
www.louisvilleladder.com Louisville Ladder Corp. 7765 National Turnpike Unit 190 Louisville KY 40214
2 of 2
ASSEMBLY INSTRUCTIONS
SPREADER BRACE KIT
PROCEDURE FOR REPLACING SPREADER BRACE FOR STEPLADDER
Note: If ladder side rail is damaged in any way, do not try to repair, destroy the ladder.
FIGURE No.- 3
DRAWING
Using a 1/4” drill bit remove the rivets attaching the spreader brace to the ladder by drilling through the thickness of the rivet curl on the inside of the ladder rail
With the curl of the rivets removed gently tap rivets out by using 1/4” dia. punch
FIGURE No.- 1 FIGURE No.- 2
1.- Attach new spreader brace to ladder as shown in figure 3
2.- Be sure that the long side of the spreader brace is attached to the front rail
3.- Check ladder stability and operation before use