PIRANHA PRESS BRAKE & SHEARS
Transcript of PIRANHA PRESS BRAKE & SHEARS
PIRANHA
PRESS BRAKE& SHEARS
PIRANHA PRESS BRAKE/SHEAR | 001
Suggested die openings for material up to 1/4” is8 times material thickness
Suggested die openings for material above 1/4” is10 times material thickness
Bending tonnage for other materials as compared to mild steel on chart are as follows:
All of the above bending tonnages are nominal and represent average conditions. These values are dependent upon the radii of the dies, the yield strength of the material, the temper of the material, direction of grain, etc. Therefore, a safety factor of at least 20% should be added when selecting a press for a given job.
Steels greater than 60,000 PSI requires additional tonnage and/orwider die openings.
Soft Brass - 50% of tonnage shownAluminum Alloys (Heat Treated) - Same as steelStainless Steel - 50% more than shownSoft Aluminum - 50% of tonnage shownChrome Molybdenum - 100% more than shown
BENDING FORCE
44.256.376.291.2113.0143.0
39.7 31.652.964.680.7104.0137.0
27.1 21.036.543.653.568.793.0110.0
23.3 16.927.433.343.158.370.086.2110.0
15.9 13.119.424.633.339.748.863.685.2
11.214.817.324.428.635.445.861.7
9.512.316.319.624.030.942.361.1
7.710.512.715.319.727.039.850.4
6.17.49.011.415.422.729.533.339.4
4.45.77.511.214.316.419.323.127.4
4.05.87.38.59.911.914.518.6
4.4 2.95.56.37.59.011.114.219.2
4.1 3.24.65.66.58.09.713.116.7
2.1 1.82.53.03.54.76.37.69.211.9
1.51.82.22.83.84.55.67.19.6
1.31.72.22.53.04.05.3
1.11.41.72.33.1
INGA .3125.25 .4375.375 .625.5 .875.75 1.1251 1.51.25 2.52 3.53 54 76 10 128
.036
.048
.060
.075
.105
.120
.135
.188
.250
.313
.375
.438
.500
.625
.750
.875
1.000
20
18
16
14
12
11
10
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
METALTHICKNESS WIDTH OF V DIE OPENING
APPROXIMATE PRESSURE IN TONS/LINE AR FOOT REQUIRED TO MAKE 90° AIR BEND ON MILD STEEL(60,000 PSI TENSILE STRENGTH) WITH VARIOUS WIDTH DIE OPENINGS
PRESS BR AKETONNAGE CHART
44.256.376.291.2113.0143.0
39.7 31.652.964.680.7104.0137.0
27.1 21.036.543.653.568.793.0110.0
23.3 16.927.433.343.158.370.086.2110.0
15.9 13.119.424.633.339.748.863.685.2
11.214.817.324.428.635.445.861.7
9.512.316.319.624.030.942.361.1
7.710.512.715.319.727.039.850.4
6.17.49.011.415.422.729.533.339.4
4.45.77.511.214.316.419.323.127.4
4.05.87.38.59.911.914.518.6
4.4 2.95.56.37.59.011.114.219.2
4.1 3.24.65.66.58.09.713.116.7
2.1 1.82.53.03.54.76.37.69.211.9
1.51.82.22.83.84.55.67.19.6
1.31.72.22.53.04.05.3
1.11.41.72.33.1
INGA .3125.25 .4375.375 .625.5 .875.75 1.1251 1.51.25 2.52 3.53 54 76 10 128
.036
.048
.060
.075
.105
.120
.135
.188
.250
.313
.375
.438
.500
.625
.750
.875
1.000
20
18
16
14
12
11
10
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
METALTHICKNESS WIDTH OF V DIE OPENING
APPROXIMATE PRESSURE IN TONS/LINE AR FOOT REQUIRED TO MAKE 90° AIR BEND ON MILD STEEL(60,000 PSI TENSILE STRENGTH) WITH VARIOUS WIDTH DIE OPENINGS
PRESS BR AKETONNAGE CHART
Robust torque tube design with a link system that connects both sides of the ram and rotates to keep the ram parallel during the bending process. This machine fits well in applications not requiring sophisticated control or back gauge options for a solid pressbrake offering.
ROBUST &ECONOMICAL Estun E21 CNC Control
X-axis Back gaugeStarter set of press brake tooling (Upper punch with multi v-die)
40-280 Tons Light CurtainSide & Rear Interlock Safety Gates
STANDARD FEATURES
PIRANHA PRESS BRAKE/SHEAR | 003
PIRANHA ADVANTAGE
Torque tube/X-axis back gauge
PRESS BRAKET-SERIES
Please see specific quote for individual machine specifications.
High end precision press brake with a long list of standard features such as integrated bed crowning, Delem Controls, as well as having the option to add many upgrades. Fits shops requiring high end control features and multiaxis back gauges for bendingcomplex parts.
Y1-Y2PRECISION
DA58 CNC controlRam repeatability .0004”Easy Crown Automated Hydraulic Bed Crowning with 3 piece bed designFiessler AKAS-LC II Laser Safety CurtainHoebiger Hydraulics from Germany, Heidenheim Scales from Switzerland and Telemecanique, Siemens Electrics with Delta or Panasonic Drives & MotorsSide & Rear Safety GatesX & R Back Gauge
Fiessler Laser CurtainSide Safety GatesRear Safety Gates
Controls:
Back Gauges:
Offline Software:
DA66T or DA69T
Z1 Z2 (up to 6-axis)
Profile-T 2DProfile-T 3D
PIRANHA ADVANTAGESTANDARD FEATURES
STANDARD SAFETY EQUIPMENT
OPTIONAL UPGRADES
PIRANHA PRESS BRAKE/SHEAR | 005
6 axis back gauge
30-3,000 Tons
PRESS BRAKEP-SERIES
Please see specific quote for individual machine specifications.
TANDEM PRESS BRAKE
OPTIONAL: SHEET FOLLOWERS
This economically priced hydraulic guillotine
shear comes standard with many features not
normally found at this price point such as
CNC controlled blade gap and rake angle.
This all works together to get the best
quality sheared parts every time on
a wide range of materials.
TOUGH.ACCURATE.RELIABLE.
PIRANHA ADVANTAGE
PIRANHA PRESS BRAKE/SHEAR | 009
PIRANHA SHEARHYDRAULIC GUILLOTINE
Delem DAC360s ControlGuillotine design with a 3-point Roller Gib SystemStandard 39” Travel Back Gauge with retract functionCNC Rake Angle AdjustmentCNC Blade Gap AdjustmentCNC Stroke AdjustmentBosch Rexroth Hydraulics with accumulator returnHigh Quality Alloy Segmented Blade
Please see specific quote for individual machine specifications.
STANDARD FEATURES1/4” - 1” Capacity
1.800.338.5471 | 650 Race St. | Rockford, IL 61101 | [email protected]
piranhafab.com
IRONWORKER
PRESS BRAKE
SHEAR
BENDING ROLL
PORTABLE PRESS
LASER
PLASMA
COMBINATION