Piping Learning Systems 46105-0098... · Piping Training System (Second Team, Add-On to 46105-0 and...
Transcript of Piping Learning Systems 46105-0098... · Piping Training System (Second Team, Add-On to 46105-0 and...
LabVolt Series
Datasheet
Piping Learning Systems46105-00
Festo Didactic
en 120 V - 60 Hz
09/2019
Piping Learning Systems, LabVolt Series
2 © Festo Didactic
Table of ContentsGeneral Description_______________________________________________________________________2The Mobile Workstation ___________________________________________________________________2Tools ___________________________________________________________________________________3Storage _________________________________________________________________________________3Courseware______________________________________________________________________________4Consumables ____________________________________________________________________________4Selection Chart___________________________________________________________________________4Piping Training System, Models 46105-0, -A, and -B ____________________________________________4Second Team Add-On, Models 46105-C and -D_________________________________________________5Topic Coverage___________________________________________________________________________5Features & Benefits _______________________________________________________________________6List of Available Training Systems ___________________________________________________________6Additional Equipment Required to Perform the Exercises ________________________________________6Optional Equipment_______________________________________________________________________6Available Training Systems_________________________________________________________________7Equipment Description __________________________________________________________________ 15Optional Equipment Description __________________________________________________________ 28
General DescriptionThe Piping Training Systems form a hands-on training program designed to train students for careers as pipe fitters and piping maintenance technicians.
The main learning objectives are the reading of piping schematics, calculation of pipe lengths, fabrication, installation, and testing of piping circuits made of galvanized steel pipes, hoses, PVC pipes, and copper tubes. The systems can also be used to teach students how to enforce the safety rules to be followed when working at industrial sites.
Several configurations are available to match specific training needs.
The Mobile WorkstationThe Mobile Workstation is the basic component of the training system. It is a versatile bench designed for the setting up of piping circuits. The pipes are fixed to the Mobile Workstation using metal struts and pipe hangers. The workstation can accommodate two student groups at the same time, and is sized to fit through standard door openings.
Piping Learning Systems, LabVolt Series
© Festo Didactic 3
ToolsPerforming the courseware exercises in the Piping Training Systems requires a number of specialized tools that are supplied with the training system. These include a threader, a reamer, a cutter, vise, benders, wrenches, a level, and a flaring tool.
Performing the courseware exercises also requires the following basic tools, that must be provided by the user:
• Wire brush• Screwdriver set• Ratchet• Calculator• Safety glasses• Safety shoes• Safety hard hat• Leather gloves
StorageThe Piping Training System includes wall supports and many storage spaces on the Mobile Workstation to store the components.
Piping Learning Systems, LabVolt Series
4 © Festo Didactic
CoursewareThe courseware supplied with the Piping Training Systems consists of a student manual and an instructor guide. Two reference textbooks are also included. The student manual consists of a series of work orders that describe different tasks to be performed by students. The corresponding instructor guide provides the list of points that should
be checked to assess the student work as well as the answers to questions. The student manual and instructor guide are fully illustrated and color printed.
ConsumablesConsumable items such as pipes, tubes, hoses, fittings, and tapes are required to perform the courseware exercises. An optional consumables package is available to fill that need. The package includes the consumables required for a student or student group to complete the work orders in the student manual.
Selection Chart
Piping Training System, Models 46105-0, -A, and -B
Piping Learning Systems, LabVolt Series
© Festo Didactic 5
Second Team Add-On, Models 46105-C and -D
Topic Coverage• Motor Operators• Pipes and Pipe Fittings• Valve Types and Operation
Piping Learning Systems, LabVolt Series
6 © Festo Didactic
1 Contains all the consumables required by a student or student group to perform the work orders in the student manual.
• Safety Valves• Steam Traps• Valve Maintenance• Fabrication, Assembly, and Installation• Measurement and Layout• System Testing• Safety Rules and Procedures• Estimated program duration: 30 hours
Features & Benefits• Provides safe, hands-on piping training• Sturdy, yet flexible design integrating components that meet industrial safety standards• Wide-range of industrial-grade components• Versatile mobile workstation allowing up to two students groups to work at the same time• Modular approach that allows the system to be configured to fit different training needs• Two or more equipment setups can be grouped together to form complex industrial applications• Comprehensive curriculum• Lockable swiveling casters; system sized to fit standard door openings• System sized to fit standard door openings• Estimated lab time: 30 hours
List of Available Training Systems
Qty DescriptionModel number
1 Piping Training System (Stand-Alone) _____________________________________________ 580150 (46105-00)1 Piping Training System (Using Tap Water) _________________________________________ 580154 (46105-A0)1 Piping Training System (Using the Pumps Training System) ___________________________ 580155 (46105-B0)1 Piping Training System (Second Team, Add-On to 46105-0 and -B) _____________________ 580156 (46105-C0)1 Piping Training System (Second Team, Add-On to 46105-A) ___________________________ 580158 (46105-D0)1 Backflow Prevention Learning System (double-sided) ________________________________ 580160 (46105-F0)
Additional Equipment Required to Perform the Exercises
Qty DescriptionModel number
1 Piping Consumables __________________________________________________________ 583478 (46789-00)
Optional Equipment
Qty DescriptionModel number
1 Cutting and Tapping Oil ________________________________________________________ 789891 (24209-00)1 PVC Cement __________________________________________________________________ 790138 (31803-00)1 PVC Primer ___________________________________________________________________ 790139 (31804-00)1 Rust Inhibitor Solution _________________________________________________________ 777198 (38096-00)1 Antibacterial Solution _________________________________________________________ 8060736 (38097-00)1 Piping Training System (Manuals on CD-ROM) ______________________________________ 580441 (39162-A0)1 Yellow Tape __________________________________________________________________ 778695 (39429-00)
1
Piping Learning Systems, LabVolt Series
© Festo Didactic 7
Qty DescriptionModel number
1 Marker ______________________________________________________________________ 778696 (39430-00)1 Thread Seal Tape ______________________________________________________________ 763951 (40685-00)1 Piping Fundamentals - eSeries ___________________________________________________ 583477 (46759-E0)
Available Training Systems
Piping Training System (Stand-Alone)580150 (46105-00)
The Piping Training System (Stand-Alone) provides all the equipment required to operate the system independently, including a Pumping Unit, Model 46750.
List of Equipment
Qty DescriptionModel number
1 Pumping Unit _________________________________________________________________ 579984 (46750-00)1 Supports ____________________________________________________________________ 579986 (46751-00)1 Storage Space ________________________________________________________________ 579989 (46752-00)1 Pipe Hangers _________________________________________________________________ 763415 (46753-00)1 Flowmeter GPM _______________________________________________________________ 579990 (46760-00)1 Pressure Gauge – 210 kPa (30 psi) _______________________________________________ 579992 (46761-00)1 Piping Accessories ____________________________________________________________ 579994 (46780-00)1 Piping Tools __________________________________________________________________ 579997 (46781-00)1 Steel and Iron Pipes ___________________________________________________________ 579998 (46782-00)1 PVC Pipes ____________________________________________________________________ 579999 (46782-A0)1 Hoses _______________________________________________________________________ 580000 (46782-B0)1 Tubes _______________________________________________________________________ 580001 (46782-C0)1 Steel and Iron Pipe Fittings ______________________________________________________ 580002 (46783-00)1 PVC Pipe Fittings ______________________________________________________________ 580003 (46783-A0)1 Hose Fittings _________________________________________________________________ 580004 (46783-B0)1 Tube Fittings _________________________________________________________________ 580005 (46783-C0)1 Valves _______________________________________________________________________ 580006 (46784-00)
Piping Learning Systems, LabVolt Series
8 © Festo Didactic
Qty DescriptionModel number
1 Instrumentation Accessories ____________________________________________________ 580007 (46785-00)1 Piping Textbooks ______________________________________________________________ 580008 (46786-00)1 Mobile Workstation, Piping _____________________________________________________ 580033 (46801-A0)
List of Manuals
DescriptionManual number
Piping Fundamentals (Work Orders - Student) __________________________________________ 580443 (39162-60)Piping Fundamentals (Work Orders - Instructor) _________________________________________ 580445 (39162-70)IPT's Pipe Trades (Student Manual) ___________________________________________________ 584854 (39330-00)
Table of Contents of the Manual(s)
Piping Fundamentals (Work Orders - Student) (580443 (39162-60))• 1 Installation of Metal Struts on the Mobile Workstation• 2 Identification of Pipes, Fittings, Valves, and Hangers• 3 Piping Circuit Layout and Measurement• 4 Pipe Length Calculation• 5 Cutting, Reaming, and Threading Steel Pipes• 6 Identification, Insulation, and Assembly of a Steel Pipe Circuit Using Threaded Fittings• 7 Assembling a Hose Circuit Using Barb Fittings and Clamps• 8 Assembling a PVC Pipe Circuit Using Cemented Fittings• 9 Assembling a Copper Tube Circuit Using Flare Fittings
System SpecificationsParameter Value
Power Requirements
Current 7.4 A
Physical Characteristics
Intended Location On the floor (stands on casters)
Dimensions (H x W x D) 1830 x 1980 x 800 mm (72 x 78 x 31.5 in)
Net Weight TBE
Piping Learning Systems, LabVolt Series
© Festo Didactic 9
Piping Training System (Using Tap Water)580154 (46105-A0)
The Piping Training System (Using Tap Water) includes the Piping Accessories, Model 46780-A, as well as the hoses required for connection to the local water tap.
List of Equipment
Qty DescriptionModel number
1 Supports ____________________________________________________________________ 579986 (46751-00)1 Storage Space ________________________________________________________________ 579989 (46752-00)1 Pipe Hangers _________________________________________________________________ 763415 (46753-00)1 Flowmeter GPM _______________________________________________________________ 579990 (46760-00)1 Pressure Gauge – 700 kPa (100 psi) ______________________________________________ 579993 (46761-A0)1 Piping Accessories ____________________________________________________________ 579995 (46780-A0)1 Piping Tools __________________________________________________________________ 579997 (46781-00)1 Steel and Iron Pipes ___________________________________________________________ 579998 (46782-00)1 PVC Pipes ____________________________________________________________________ 579999 (46782-A0)1 Hoses _______________________________________________________________________ 580000 (46782-B0)1 Tubes _______________________________________________________________________ 580001 (46782-C0)1 Steel and Iron Pipe Fittings ______________________________________________________ 580002 (46783-00)1 PVC Pipe Fittings ______________________________________________________________ 580003 (46783-A0)1 Hose Fittings _________________________________________________________________ 580004 (46783-B0)1 Tube Fittings _________________________________________________________________ 580005 (46783-C0)1 Valves _______________________________________________________________________ 580006 (46784-00)1 Instrumentation Accessories ____________________________________________________ 580007 (46785-00)1 Piping Textbooks ______________________________________________________________ 580008 (46786-00)1 Mobile Workstation, Piping _____________________________________________________ 580033 (46801-A0)
Piping Learning Systems, LabVolt Series
10 © Festo Didactic
List of Manuals
DescriptionManual number
Piping Fundamentals (Work Orders - Student) __________________________________________ 580443 (39162-60)Piping Fundamentals (Work Orders - Instructor) _________________________________________ 580445 (39162-70)IPT's Pipe Trades (Student Manual) ___________________________________________________ 584854 (39330-00)
Table of Contents of the Manual(s)
Piping Fundamentals (Work Orders - Student) (580443 (39162-60))• 1 Installation of Metal Struts on the Mobile Workstation• 2 Identification of Pipes, Fittings, Valves, and Hangers• 3 Piping Circuit Layout and Measurement• 4 Pipe Length Calculation• 5 Cutting, Reaming, and Threading Steel Pipes• 6 Identification, Insulation, and Assembly of a Steel Pipe Circuit Using Threaded Fittings• 7 Assembling a Hose Circuit Using Barb Fittings and Clamps• 8 Assembling a PVC Pipe Circuit Using Cemented Fittings• 9 Assembling a Copper Tube Circuit Using Flare Fittings
System SpecificationsParameter Value
Power Requirements None
Physical Characteristics
Intended Location On the floor (stands on casters)
Dimensions (H x W x D) 1830 x 1980 x 800 mm (72 x 78 x 31.5 in)
Net Weight TBE
Piping Training System (Using the Pumps Training System)580155 (46105-B0)The Piping Training System (Using the Pumps Trainer) includes the Piping Accessories, Model 46780-B, as well as the hoses required for connection to the Pumps Training System, Model 46106.
List of Equipment
Qty DescriptionModel number
1 Supports ____________________________________________________________________ 579986 (46751-00)1 Storage Space ________________________________________________________________ 579989 (46752-00)1 Pipe Hangers _________________________________________________________________ 763415 (46753-00)1 Flowmeter GPM _______________________________________________________________ 579990 (46760-00)1 Pressure Gauge – 210 kPa (30 psi) _______________________________________________ 579992 (46761-00)1 Piping Accessories ____________________________________________________________ 579996 (46780-B0)1 Piping Tools __________________________________________________________________ 579997 (46781-00)1 Steel and Iron Pipes ___________________________________________________________ 579998 (46782-00)1 PVC Pipes ____________________________________________________________________ 579999 (46782-A0)1 Hoses _______________________________________________________________________ 580000 (46782-B0)1 Tubes _______________________________________________________________________ 580001 (46782-C0)1 Steel and Iron Pipe Fittings ______________________________________________________ 580002 (46783-00)1 PVC Pipe Fittings ______________________________________________________________ 580003 (46783-A0)1 Hose Fittings _________________________________________________________________ 580004 (46783-B0)
Piping Learning Systems, LabVolt Series
© Festo Didactic 11
Qty DescriptionModel number
1 Tube Fittings _________________________________________________________________ 580005 (46783-C0)1 Valves _______________________________________________________________________ 580006 (46784-00)1 Instrumentation Accessories ____________________________________________________ 580007 (46785-00)1 Piping Textbooks ______________________________________________________________ 580008 (46786-00)1 Mobile Workstation, Piping _____________________________________________________ 580033 (46801-A0)
List of Manuals
DescriptionManual number
Piping Fundamentals (Work Orders - Student) __________________________________________ 580443 (39162-60)Piping Fundamentals (Work Orders - Instructor) _________________________________________ 580445 (39162-70)IPT's Pipe Trades (Student Manual) ___________________________________________________ 584854 (39330-00)
Table of Contents of the Manual(s)
Piping Fundamentals (Work Orders - Student) (580443 (39162-60))• 1 Installation of Metal Struts on the Mobile Workstation• 2 Identification of Pipes, Fittings, Valves, and Hangers• 3 Piping Circuit Layout and Measurement• 4 Pipe Length Calculation• 5 Cutting, Reaming, and Threading Steel Pipes• 6 Identification, Insulation, and Assembly of a Steel Pipe Circuit Using Threaded Fittings• 7 Assembling a Hose Circuit Using Barb Fittings and Clamps• 8 Assembling a PVC Pipe Circuit Using Cemented Fittings• 9 Assembling a Copper Tube Circuit Using Flare Fittings
System SpecificationsParameter Value
Power Requirements None
Physical Characteristics
Intended Location On the floor (stands on casters)
Required Floor Space (H x W x D) 1834 x 1308 x 946 mm (72.2 x 51.5 x 37 in)
Net Weight TBE
Piping Training System (Second Team, Add-On to 46105-0 and -B)580156 (46105-C0)The Piping Training System (Second Team, Add-On to 46105-0 and -B) is a second team add-on to the Piping Training Systems, Models 46105-0 and 46105-B, that allows two groups of students to work simultaneously on the same workstation.
The Piping Tools, Model 46781, and Piping Accessories, Model 46780, are not supplied with the training system. If two student groups work at the same time on the workstation, they must either use the same tools or perform separate work orders.
List of Equipment
Qty DescriptionModel number
1 Supports ____________________________________________________________________ 579986 (46751-00)1 Storage Space ________________________________________________________________ 579989 (46752-00)
Piping Learning Systems, LabVolt Series
12 © Festo Didactic
Qty DescriptionModel number
1 Pipe Hangers _________________________________________________________________ 763415 (46753-00)1 Flowmeter GPM _______________________________________________________________ 579990 (46760-00)1 Pressure Gauge – 210 kPa (30 psi) _______________________________________________ 579992 (46761-00)1 Steel and Iron Pipes ___________________________________________________________ 579998 (46782-00)1 PVC Pipes ____________________________________________________________________ 579999 (46782-A0)1 Hoses _______________________________________________________________________ 580000 (46782-B0)1 Tubes _______________________________________________________________________ 580001 (46782-C0)1 Steel and Iron Pipe Fittings ______________________________________________________ 580002 (46783-00)1 PVC Pipe Fittings ______________________________________________________________ 580003 (46783-A0)1 Hose Fittings _________________________________________________________________ 580004 (46783-B0)1 Tube Fittings _________________________________________________________________ 580005 (46783-C0)1 Valves _______________________________________________________________________ 580006 (46784-00)1 Instrumentation Accessories ____________________________________________________ 580007 (46785-00)1 Piping Textbooks ______________________________________________________________ 580008 (46786-00)
List of Manuals
DescriptionManual number
Piping Fundamentals (Work Orders - Student) __________________________________________ 580443 (39162-60)Piping Fundamentals (Work Orders - Instructor) _________________________________________ 580445 (39162-70)IPT's Pipe Trades (Student Manual) ___________________________________________________ 584854 (39330-00)
Table of Contents of the Manual(s)
Piping Fundamentals (Work Orders - Student) (580443 (39162-60))• 1 Installation of Metal Struts on the Mobile Workstation• 2 Identification of Pipes, Fittings, Valves, and Hangers• 3 Piping Circuit Layout and Measurement• 4 Pipe Length Calculation• 5 Cutting, Reaming, and Threading Steel Pipes• 6 Identification, Insulation, and Assembly of a Steel Pipe Circuit Using Threaded Fittings• 7 Assembling a Hose Circuit Using Barb Fittings and Clamps• 8 Assembling a PVC Pipe Circuit Using Cemented Fittings• 9 Assembling a Copper Tube Circuit Using Flare Fittings
System SpecificationsParameter Value
Physical Characteristics
Intended Location Installed on the workstation of the Piping Training System, Model 46105-0 or Model 46105-B
Dimenions (H x W x D) TBE
Net Weight TBE
Piping Training System (Second Team, Add-On to 46105-A)580158 (46105-D0)The Piping Training System (Second Team, Add-On to 46105-A) is a second team add-on to the Piping Training System, Model 46105-A, that allows two groups of students to work simultaneously on the workstation.
Piping Learning Systems, LabVolt Series
© Festo Didactic 13
The Piping Tools, Model 46781, and Piping Accessories, Model 46780, are not supplied with the training system. If two student groups work at the same time on the workstation, they must either use the same tools or perform separate work orders.
List of Equipment
Qty DescriptionModel number
1 Supports ____________________________________________________________________ 579986 (46751-00)1 Storage Space ________________________________________________________________ 579989 (46752-00)1 Pipe Hangers _________________________________________________________________ 763415 (46753-00)1 Flowmeter GPM _______________________________________________________________ 579990 (46760-00)1 Pressure Gauge – 700 kPa (100 psi) ______________________________________________ 579993 (46761-A0)1 Steel and Iron Pipes ___________________________________________________________ 579998 (46782-00)1 PVC Pipes ____________________________________________________________________ 579999 (46782-A0)1 Hoses _______________________________________________________________________ 580000 (46782-B0)1 Tubes _______________________________________________________________________ 580001 (46782-C0)1 Steel and Iron Pipe Fittings ______________________________________________________ 580002 (46783-00)1 PVC Pipe Fittings ______________________________________________________________ 580003 (46783-A0)1 Hose Fittings _________________________________________________________________ 580004 (46783-B0)1 Tube Fittings _________________________________________________________________ 580005 (46783-C0)1 Valves _______________________________________________________________________ 580006 (46784-00)1 Instrumentation Accessories ____________________________________________________ 580007 (46785-00)1 Piping Textbooks ______________________________________________________________ 580008 (46786-00)
List of Manuals
DescriptionManual number
Piping Fundamentals (Work Orders - Student) __________________________________________ 580443 (39162-60)Piping Fundamentals (Work Orders - Instructor) _________________________________________ 580445 (39162-70)IPT's Pipe Trades (Student Manual) ___________________________________________________ 584854 (39330-00)
Table of Contents of the Manual(s)
Piping Fundamentals (Work Orders - Student) (580443 (39162-60))• 1 Installation of Metal Struts on the Mobile Workstation• 2 Identification of Pipes, Fittings, Valves, and Hangers• 3 Piping Circuit Layout and Measurement• 4 Pipe Length Calculation• 5 Cutting, Reaming, and Threading Steel Pipes• 6 Identification, Insulation, and Assembly of a Steel Pipe Circuit Using Threaded Fittings• 7 Assembling a Hose Circuit Using Barb Fittings and Clamps• 8 Assembling a PVC Pipe Circuit Using Cemented Fittings• 9 Assembling a Copper Tube Circuit Using Flare Fittings
System SpecificationsParameter Value
Physical Characteristics
Intended Location Installed on the workstation of the Piping Training System, Model 46105-A
Dimensions (H x W x D) TBE
Net Weight TBE
Piping Learning Systems, LabVolt Series
14 © Festo Didactic
Backflow Prevention Learning System (double-sided)580160 (46105-F0)
Learn about common back flow prevention devices, and test them in a compact workstation
This system is designed to learn the necessary skills to test backflow prevention devices (BFP) using industrial-grade test equipment. The double-sided version accommodates 2 teams.
BFP are of crucial importance for authorities responsible for the supply of potable water to populations. To make sure that public water is safe, cross-connections in the water distribution system with potentially harmful fluids must be identified. Proper backflow prevention devices
must be installed to prevent the contamination of potable water.
The BFP Learning System, features the most common backflow prevention devices used in typical residential and commercial installations. Students learn to perform test procedures on BFP devices.
A mobile workstation forms the basis of the system. It includes various BFP devices and several other components such as a centrifugal pump, a flowmeter, valves, and pipes. Using modern, commercial-grade equipment is helpful in teaching theoretical and hands-on knowledge required to work in backflow prevention.
Features & Benefits
• Compact double-sided workstation for two teams of students• Closed-loop recirculating water circuit with drip tray to keep the floor dry• Includes industrial-grade tools used by technicians installing and testing BFP devices
List of Equipment
Qty DescriptionModel number
1 Pumping Unit _________________________________________________________________ 579984 (46750-00)1 Backflow Preventers Supports (Front) _____________________________________________ 579987 (46751-A0)1 Backflow Preventers Supports (Back) _____________________________________________ 579988 (46751-B0)2 Flowmeter GPM _______________________________________________________________ 579990 (46760-00)1 Backflow Preventers (Front) _____________________________________________________ 580009 (46787-00)1 Backflow Preventers (Back) _____________________________________________________ 580010 (46787-A0)1 Mobile Workstation, Piping _____________________________________________________ 580033 (46801-A0)
Piping Learning Systems, LabVolt Series
© Festo Didactic 15
List of Manuals
DescriptionManual number
Backflow Prevention Devices (Job Sheets - Student) _____________________________________ 583865 (20640-20)Backflow Prevention Devices (Job Sheets - Instructor) ____________________________________ 583866 (20640-30)Manual of Cross-Connection Control (Student Manual) ___________________________________ 583871 (20703-00)
Table of Contents of the Manual(s)
Backflow Prevention Devices (Job Sheets - Student) (583865 (20640-20))• 1 Introduction to the BFP Training System• 2 Pressure Measurements• 3 Backflow Prevention Principles• 4 Test Procedure for a Spill-Resistant Vacuum Breaker• 5 Test Procedure for a Reduced Pressure Zone Assembly
System SpecificationsParameter Value
Physical Characteristics
Intended Location On the floor (stands on casters)
Dimensions (H x W x D) 1830 x 1980 x 800 mm (72 x 78 x 31.5 in)
Net Weight TBE
Equipment Description
Pumping Unit 579984 (46750-00)
The Pumping Unit is designed to be installed in the Mobile Workstation. It contains a motor-pump assembly, a reservoir, and a disconnecting switch. The pump is connected to the reservoir via a strainer, ball valve, and pressure measurement point. The pump is controlled by a Start/Stop push-button station protected by a disconnecting switch with lockout/tagout devices. The Pumping Unit and the Mobile Workstation form a stand-alone pumping system that is used to test the piping circuits for leaks.
SpecificationsParameter Value
Power Requirements
Current 7.4 A
Service Installation Standard single-phase ac outlet
Pump
Type Centrifugal
Flow 53 L/min (14 gal US/min) at 10 m (30 ft)
Maximum Pressure 16.1 m (53 ft)
Maximum Speed 3450 r/min
Piping Learning Systems, LabVolt Series
16 © Festo Didactic
Parameter Value
Motor
Power 375 W (1/2 hp)
Current 7.4 A
Speed 3450 r/min
Electrical Protection
Type Fuses
Tank
Capacity 115 L (30 gal US)
Accessories
Accessories Rust inhibitor
Antibacterial solutions
Physical Characteristics
Intended Location Installed in the lower part of the Piping Training System worstation
Dimensions (H x W x D) 340 x 655 x 655 mm (13.5 x 25.8 x 25.8 in)
Net Weight 5.9 kg (12.8 lb)
Supports 579986 (46751-00)
The Supports set includes all the struts, position guides, tube supports, brackets, storage pan, and accessories required to set up the piping circuits and store the components.
SpecificationsParameter Value
Small Struts
Number 6
Length 15.2 cm (6 in)
Medium Struts
Number 6
Length 30.5 cm (12 in)
Long Struts
Number 4
Length 101.6 cm (40 in)
Positioning Guides
Number 3
Included Installation Accessories Bolts, nuts, washers, spring nuts, angles, protective caps
Backflow Preventers Supports (Front) 579987 (46751-A0)The Backflow Preventers Supports (Front) set includes all the struts, clamps, nuts, and screws required to support the backflow prevention devices on the front side of the workstation.
Backflow Preventers Supports (Back) 579988 (46751-B0)The Backflow Preventers Supports (Back) set includes all the struts, clamps, nuts, and screws required to support the backflow prevention devices on the back side of the workstation.
Piping Learning Systems, LabVolt Series
© Festo Didactic 17
Storage Space 579989 (46752-00)
The Storage Space set contains the components required to store the fittings, pipe samples, pipe hangers, and mounting accessories. This includes storage bins installed on a louvered steel panel. The louvered steel panel mounts on the side of the Mobile Workstation.
SpecificationsParameter Value
Small Bins
Number 9
Dimensions (H x W x D) 75 x 105 x 135 mm (3 x 4 1/8 x 5 3/8 in)
Medium Bins
Number 3
Dimensions (H x W x D) 75 x 105 x 190 mm (3 x 4 1/8 x 7 3/8 in)
Large Bins
Number 3
Dimensions (H x W x D) 125 x 145 x 280 mm (5 x 5 3/4 x 11 in)
Installation Accessories Bolts, nuts, washers, spring nuts, angles, screws, louvered steel panel
Pipe Hangers 763415 (46753-00)
The Pipe Hangers set includes four types of pipe clamps and one type of pipe hanger. These types of hangers are commonly used in the industry to support pipes and tubes.
SpecificationsParameter Value
Pipe Hanger with Beam Attachment and Adjustable Ring
Piping Learning Systems, LabVolt Series
18 © Festo Didactic
Parameter Value
Number 2
Pipe Clamp, Attach to Metal Struts, with Vibration Cushion
Number 2
Pipe Clamp, Attach to Metal Struts, with Tie Wraps
Number 4
Pipe Clamp, Attach to Metal Struts
Number 2
Pipe Clamp, Attach to Beams
Quantity 2
Flowmeter GPM 579990 (46760-00)
The Flowmeter GPM provides direct visual reading of the flow rate. It has a 0-20 gal US/min flow range. The Flowmeter GPM is fixed to a mounting bracket to be attached to metal struts.
SpecificationsParameter Value
Flow Range 0-75 L/min (0-20 gal US/min)
Maximum Pressure 1000 kPa (150 psig)
Accuracy 3%
Physical Characteristics
Dimensions (H x W x D) 240 x 63 x 89 mm (9.5 x 2.5 x 3.5 in)
Net Weight 0.91 kg (2.0 lb)
Piping Learning Systems, LabVolt Series
© Festo Didactic 19
Pressure Gauge – 210 kPa (30 psi) 579992 (46761-00)
The Pressure Gauge provides a direct visual reading of the measured pressure. The Pressure Gauge is fixed to a mounting bracket to be attached to metal struts. It has a maximum operating pressure of 210 kPa (30 psi). A version with a maximum operating range of 700 kPa (100 psi) is also available: Model 46761-A.
SpecificationsParameter Value
Maximum Operating Pressure 210 kPa (30 psi)
Units kPa, psi
Physical Characteristics
Dimensions (H x W x D) 140 x 140 x 60 mm (5.5 x 5.5 x 2.3 in)
Net Weight 0.73 kg (1.6 lb)
Pressure Gauge – 700 kPa (100 psi) 579993 (46761-A0)
The Pressure Gauge provides a direct visual reading of the measured pressure. The Pressure Gauge is fixed to a mounting bracket to be attached to metal struts. It has a maximum operating range of 700 kPa (100 psi). A version with a maximum operating range of 210 kPa (30 psi) is also available: Model 46761-0.
SpecificationsParameter Value
Maximum Operating Pressure 700 kPa (100 psi)
Units kPa, psi
Physical Characteristics
Dimensions (H x W x D) 140 x 140 x 60 mm (5.5 x 5.5 x 2.3 in)
Net Weight 0.73 kg (1.6 lb)
Piping Learning Systems, LabVolt Series
20 © Festo Didactic
Piping Accessories 579994 (46780-00)
The Piping Accessories set contains various accessories required to set up the piping circuits. It contains a pipe and tube gauge, mounting hardware, cutting and tapping oil, PVC cement and primer, an identification tape, a marker, and a thread seal tape.
SpecificationsParameter Value
AccessoriesBolts, nuts, washers, spring nuts, angles, gauges, thread seal tape, taping oil, yellow tape, marker, PVC primer, and solvent.
Piping Accessories 579995 (46780-A0)The Piping Accessories set includes the same components as the Piping Accessories, Model 46870, with the addition of all the hoses required for connection to the local water tap.
SpecificationsParameter Value
AccessoriesBolts, nuts, washers, spring nuts, angles, gauges, thread seal tape, taping oil, yellow tape, marker, PVC primer, solvent, and all the hoses required for connection to the local water tap
Piping Accessories 579996 (46780-B0)
The Piping Accessories set includes the same components as the Piping Accessories, Model 46780-0, with the addition of all the hoses required for connection to the Pumps Training System.
SpecificationsParameter Value
AccessoriesBolts, nuts, washers, spring nuts, angles, gauges, thread seal tape, taping oil, yellow tape, marker, PVC primer, solvent, and all the hoses required for connection to the Pumps Training System.
Piping Learning Systems, LabVolt Series
© Festo Didactic 21
Piping Tools 579997 (46781-00)
The Piping Tools set contains all the specialized tools required to fabricate and install the piping circuits. It is not included with the second team add-ons, Models 46105-C and 46105-D.
SpecificationsParameter Value
ToolsPipe cutter, 12.7 mm (1/2 in) die, pipe threader, pipe reamer, pipe vise, PVC cutter, PVC reamer, tube cutters, tube bender, flaring tool, bending spring, wrenches, level, measuring tape, file, level, tool box.
Steel and Iron Pipes 579998 (46782-00)
The Steel and Iron Pipes set contains the steel and iron pipes required to learn how to fabricate steel pipe circuits. It also includes pipe insulation.
SpecificationsParameter Value
Black Iron Pipe, 19.1 mm (3/4 in) NPS
Length 150 mm (6 in)
Galvanized Steel Pipe, 19.1 mm (3/4 in) NPS
Length 150 mm (6 in)
Galvanized Steel Pipe, 25.4 mm (1 in) NPS
Length 150 mm (6 in)
Galvanized Steel Pipe, 12.7 mm (1/2 in) NPS
Length 19200 mm (756 in)
Pipe Insulation for Pipe, 12.7 mm (1/2 in) NPS
Length 1800 mm (72 in)
PVC Pipes 579999 (46782-A0)
The PVC Pipes set contains the PVC pipes required to learn how to set up PVC pipe circuits.
Piping Learning Systems, LabVolt Series
22 © Festo Didactic
SpecificationsParameter Value
PVC Pipe, 19.1 mm (3/4 in) NPS
Length 150 mm (6 in)
PVC Pipe, 9.53 mm (3/8 in) NPS
Length 150 mm (6 in)
PVC Pipe, 12.7 mm (1/2 in) NPS
Length 6000 mm (240 in)
Hoses 580000 (46782-B0)
The Hoses set contains the hoses required to learn how to set up piping circuits using hoses.
SpecificationsParameter Value
Hoses, 6.35 mm (1/4 in) I.D.
Length 150 mm (6 in)
Hoses, 12.7 mm (1/2 in) I.D.
Length 150 mm (6 in)
Hoses, 19.1 mm (3/4 in) I.D.
Length 150 mm (6 in)
Hoses, 25.4 mm (1 in) I.D.
Length 150 mm (6 in)
Hoses, 9.53 mm (3/8 in) I.D.
Length 7600 mm (300 in)
Tubes 580001 (46782-C0)
The Tubes set contains the copper and steel tubes required to learn how to set up piping circuits using tubes.
SpecificationsParameter Value
Copper (soft), 9.53 mm (3/8 in) O.D.
Length 7600 mm (300 in)
Copper (soft), 6.35 mm (1/4 in) O.D.
Piping Learning Systems, LabVolt Series
© Festo Didactic 23
Parameter Value
Length 7600 mm (300 in)
Steel (soft), 9.53 mm (3/8 in) O.D.
Length 150 mm (6 in)
Copper (soft), 12.7 mm (1/2 in) O.D.
Length 150 mm (6 in)
Copper (rigid), 22.2 mm (7/8 in) O.D.
Length 150 mm (6 in)
Copper (soft), 15.9 mm (5/8 in) O.D.
Length 150 mm (6 in)
Copper (rigid), 19.1 mm (3/4 in) O.D.
Length 150 mm (6 in)
Steel and Iron Pipe Fittings 580002 (46783-00)
The Iron and Steel Pipe Fittings set contains a large selection of fittings commonly used with iron and steel pipes.
SpecificationsParameter Value
Street Elbow, 90°, 12.7 mm (1/2 in), Malleable Iron Threaded
Number 4
Reducing Elbow, 90°, 12.7 mm (1/2 in), Malleable Iron Threaded
Number 2
Elbow, 45°, 12.7 mm (1/2 in), Malleable Iron Threaded
Number 6
Elbow, 90°, 12.7 mm (1/2 in), Malleable Iron Threaded
Number 8
Union - Ground Joint, 12.7 mm (1/2 in), Malleable Iron Threaded
Number 6
Union - Flange, 12.7 mm (1/2 in), Forged Steel
Number 2
Coupling, 12.7 mm (1/2 in), Malleable Iron Threaded
Number 4
Reducer Coupling, 19.1 x 12.7 mm (3/4 x 1/2 in), Malleable Iron Threaded
Number 4
Bushing, 19.1 x 12.7 mm (3/4 x 1/2 in), Bronze
Number 8
Cross, 12.7 mm (1/2 in), Malleable Iron Threaded
Number 2
Tee, 12.7 mm (1/2 in), Malleable Iron Threaded
Number 4
Piping Learning Systems, LabVolt Series
24 © Festo Didactic
Parameter Value
Cap, 12.7 mm (1/2 in), Malleable Iron Threaded
Number 2
PVC Pipe Fittings 580003 (46783-A0)
The PVC Pipe Fittings set contains a large selection of fittings commonly used with PVC pipes.
SpecificationsParameter Value
Socket-to-Socket, Coupling, 12.7 mm (1/2 in)
Number 4
Socket-to-Socket, Reducing Bushing, 19.1 x 12.7 mm (3/4 x 1/2 in)
Number 4
Socket-to-Threaded, Reducing Bushing, 19.1 x 12.7 mm (3/4 x 1/2 in)
Number 4
Socket, Elbow 90°, 12.7 mm (1/2 in)
Number 4
Threaded, Elbow 90°, 12.7 mm (1/2 in)
Number 4
Socket, Elbow 45°, 12.7 mm (1/2 in)
Number 4
Socket-to-Threaded, Female Adaptor, 12.7 x 12.7 mm (1/2 x 1/2 in)
Number 4
Threaded, Nipple, 12.7 mm (1/2 in)
Number 4
Socket-to-Socket, Reducing Coupling, 19.1 x 12.7 mm (3/4 x 1/2 in)
Number 2
Hose Fittings 580004 (46783-B0)
The Hose Fittings set contains a large selection of fittings commonly used with hoses.
Specifications
Piping Learning Systems, LabVolt Series
© Festo Didactic 25
Parameter Value
Hose Barb Tee, 9.53 x 9.53 x 9.53 mm (3/8 x 3/8 x 3/8 in)
Number 2
Hose Barb Adaptor, 0.375 mm (3/8 in) hose x 12.7 mm (1/2 in) pipe (Male)
Number 4
Hose Barb Adaptor, 0.375 mm (3/8 in) hose x 12.7 mm (1/2 in) pipe (Female)
Number 2
Hose Barb Splicer, 9.53 mm (3/8 in)
Number 5
Hose Barb Elbow 90°, 9.53 mm (3/8 in) hose x 12.7 mm (1/2 in) pipe
Number 2
Hose Clamp
Number 10
Tube Fittings 580005 (46783-C0)
The Tube Fittings set contains a large selection of fittings commonly used with copper tubes.
SpecificationsParameter Value
Nut, Tube 6.35 mm (1/4 in)
Number 10
Nut, Tube 9.53 mm (3/8 in)
Number 10
Tee, Tube 6.35 mm (1/4 in)
Number 2
Swivel Union, Tube 6.35 mm (1/4 in)
Number 2
Reducing Union, Tube-to-Tube, 9.53 mm (3/8 in) to 6.35 mm (1/4 in)
Number 2
Union Coupling, Tube-to-Tube 6.35 mm (1/4 in)
Number 4
Adaptor, Tube-to-Female Pipe, 9.53 x 12.7 mm (3/8 x 1/2 in)
Number 2
Adaptor, Tube-to-Female Pipe, 6.35 x 9.53 mm (1/4 x 3/8 in)
Number 2
Elbow 90°, Tube-to-Female Pipe, 9.53 x 12.7 mm (3/8 x 1/2 in)
Number 2
Elbow 90°, Tube-to-Tube 6.35 mm (1/4 in)
Number 2
Elbow 90°, Tube-to-Tube 9.53 mm (3/8 in)
Number 2
Plug, Tube 9.53 mm (3/8 in)
Number 2
Piping Learning Systems, LabVolt Series
26 © Festo Didactic
Valves 580006 (46784-00)
The Valves set contains five types of valves commonly used in the piping industry. This package includes check valve, ball valve, globe valve, needle valve, and gate valve.
SpecificationsParameter Value
Check Valve
Number 2
Plug Valve (Ball Valve)
Number 2
Gate Valve
Number 2
Needle Valve
Number 2
Globe Valve
Quantity 2
Instrumentation Accessories 580007 (46785-00)
The Instrumentation Accessories set contains the accessories required for pressure measurements. The set includes nipples with pressure measurement port, and plastic tubing.
SpecificationsParameter Value
Nipple 12.7 mm (1/2 in), with pressure measurement port
Quantity 4
Length 10.2 cm (4 in)
Tube Cutter For tubing 6.35-12.7 mm (1/4-1/2 in)
Tubing
Type Polyethylene, 6.35 mm (1/4 in) O.D., 4.5 m (180 in) long
Maximum Operating Pressure 700 kPa (100 psi)
Piping Learning Systems, LabVolt Series
© Festo Didactic 27
Piping Textbooks 580008 (46786-00)
The Piping Textbooks set contains the following reference manuals: Fundamentals of Pipe Fitting, and IPT's Pipe Trades Handbook.
Manual
DescriptionManual number
IPT's Pipe Trades (Student Manual) ___________________________________________________ 584854 (39330-00)
Backflow Preventers (Front) 580009 (46787-00)The Backflow Preventers (Front) set includes various backflow prevention devices and the necessary equipment to perform the job sheets in the courseware.
List of Manuals
DescriptionManual number
Backflow Prevention Devices (Job Sheets - Student) _____________________________________ 583865 (20640-20)Backflow Prevention Devices (Job Sheets - Instructor) ____________________________________ 583866 (20640-30)Manual of Cross-Connection Control (Student Manual) ___________________________________ 583871 (20703-00)
Table of Contents of the Manual(s)
Backflow Prevention Devices (Job Sheets - Student) (583865 (20640-20))• 1 Introduction to the BFP Training System• 2 Pressure Measurements• 3 Backflow Prevention Principles• 4 Test Procedure for a Spill-Resistant Vacuum Breaker• 5 Test Procedure for a Reduced Pressure Zone Assembly
Backflow Preventers (Back) 580010 (46787-A0)The Backflow Preventers (Back) package includes various backflow prevention devices and the necessary equipment to perform the job sheets of the courseware.
Piping Learning Systems, LabVolt Series
28 © Festo Didactic
List of Manuals
DescriptionManual number
Backflow Prevention Devices (Job Sheets - Student) _____________________________________ 583865 (20640-20)Backflow Prevention Devices (Job Sheets - Instructor) ____________________________________ 583866 (20640-30)Manual of Cross-Connection Control (Student Manual) ___________________________________ 583871 (20703-00)
Table of Contents of the Manual(s)
Backflow Prevention Devices (Job Sheets - Student) (583865 (20640-20))• 1 Introduction to the BFP Training System• 2 Pressure Measurements• 3 Backflow Prevention Principles• 4 Test Procedure for a Spill-Resistant Vacuum Breaker• 5 Test Procedure for a Reduced Pressure Zone Assembly
Mobile Workstation, Piping 580033 (46801-A0)
The Mobile Workstation is a versatile bench that enables two student groups to operate simultaneously. It is constructed from heavy-duty metal struts and painted using powder-coated paint for durability. The unit is mounted on four swiveling casters with a lock mechanism to ensure easy motion and stable operation, and is sized to pass through standard door openings.
SpecificationsParameter Value
Physical Characteristics
Dimensions (H x W x D) 1830 x 1980 x 800 mm (72 x 78 x 31.5 in)
Net Weight TBE
Optional Equipment Description
Cutting and Tapping Oil (Optional) 789891 (24209-00)The Cutting and Tapping Oil contains oil specifically designed for cutting and tapping processes. It cools and lubricates any metal, and protects against rust. it produces no harmful vapors and is environment friendly.
SpecificationsParameter Value
Cutting and Tapping Oil
Piping Learning Systems, LabVolt Series
© Festo Didactic 29
Parameter Value
Type Target Safe
Quantity 500 ml
PVC Cement (Optional) 790138 (31803-00)The PVC Cement consists of a tube of high-strength, fast-setting, industrial-grade pvc cement ideal for piping applications.
SpecificationsParameter Value
PVC Cement
Type Weld-On 705
Quantity 946 ml (32 oz)
PVC Primer (Optional) 790139 (31804-00)The PVC Primer consists of premium, industrial-strength, low-VOC primer ideal for proper softening and preparation of PVC and CPVC pipes and fitting surfaces.
SpecificationsParameter Value
PVC Primer
Type Weld-On P-70 primer for PVC and CPVC plastic pipes
Quantity 473 ml (16 oz)
Rust Inhibitor Solution (Optional) 777198 (38096-00)The Rust Inhibitor Solution contains an industrial-grade solution used to prevent the formation of rust.
SpecificationsParameter Value
Rust Inhibitor Solution
Quantity 240 ml (8 oz)
Antibacterial Solution (Optional) 8060736 (38097-00)The Antibacterial Solution consists of a solution specially designed for time-released protection in fiber, foam, and baffle waterbeds.
SpecificationsParameter Value
Antibacterial Solution
Quantity 240 ml (8 oz)
Piping Training System (Manuals on CD-ROM) (Optional) 580441 (39162-A0)
Piping Learning Systems, LabVolt Series
30 © Festo Didactic
List of Manuals
DescriptionManual number
Backflow Prevention Devices (Job Sheets - Student) _____________________________________ 590324 (20640-20)Backflow Prevention Devices (Job Sheets - Instructor) ____________________________________ 590325 (20640-30)Piping Fundamentals (Work Orders - Student) __________________________________________ 591354 (39162-60)Piping Fundamentals (Work Orders - Instructor) _________________________________________ 591356 (39162-70)
Yellow Tape (Optional) 778695 (39429-00)The Yellow Tape is designed to be used as a marking tape.
SpecificationsParameter Value
Yellow Tape
Type Tesa 60760
Width 1.52 mm (0.006 in)
Length 32.9 m (36 yards)
Maximal Tensile Strength 110 kPa (16 psi)
Marker (Optional) 778696 (39430-00)The Marker is a permanent black marker.
SpecificationsParameter Value
Marker
Type Sharpie, permanent, non-toxic, fine point
Color Black
Thread Seal Tape (Optional) 763951 (40685-00)The Thread Seal Tape is used in the training system to seal pipe threads.
SpecificationsParameter Value
Thread Seal Tape
Width 12.7 mm (0.5 in)
Length 7.62 m (300 in)
Piping Learning Systems, LabVolt Series
© Festo Didactic 31
Piping Fundamentals - eSeries (Optional) 583477 (46759-E0)
This site-license course bundle is intended to be used in conjunction with the Piping Training System, Series 46105. It contains one course of 9 exercises, with a pretest and a posttest. The course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and
submitted (emailed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading.
The following learning platforms are available:
• 46759-E: Piping Fundamentals - eSeries• 46759-F: Piping Fundamentals - SCORM• 46759-G: Piping Fundamentals - Stand-Alone
Topic Coverage
• Installation of Metal Struts• Identification• Layout• Measurement• Calculation• Cutting• Reaming• Threading• Assembly• Threaded, Barb, Cemented, and Flare Fittings
SpecificationsParameter Value
Computer RequirementsA currently available personal computer running under one of the following operating systems: Windows® 7 or
Windows® 8.
Piping Learning Systems, LabVolt Series
32 © Festo Didactic
Piping Consumables (Optional) 583478 (46789-00)
The Piping Consumables set contains all the consumables required by a student, or a student group, to perform the tasks in the student manual. This includes pipes, hoses, tubes, fittings, and tapes.
SpecificationsParameter Value
Nipple 12.7 mm (1/2 in)
Number 4
Length 101.6 mm (4 in)
Union - Flange, 12.7 mm (1/2 in), with gasket, bolts and nuts
Number 2
Union - Ground Joint, 12.7 mm (1/2 in), malleable iron threaded
Number 1
Nipple 12.7 mm (1/2 in), with pressure measurement port, 4" long
Number 2
Length 101.6 mm (4 in)
Galvanized steel pipe, 12.7 mm (1/2 in), schedule 40
Length 12.7 m (500 in)
Elbow 90°, 12.7 mm (1/2 in), malleable iron threaded
Number 2
Cross, 12.7 mm (1/2 in), malleable iron threaded
Number 1
Cap, 12.7 mm (1/2 in), malleable iron threaded
Number 2
Tee, 12.7 mm (1/2 in), malleable iron threaded
Number 2
Coupling, 12.7 mm (1/2 in), malleable iron threaded
Number 2
Hose Barb Elbow 90°, 9.53 mm (3/8 in) hose x 12.7 mm (1/2 in) pipe
Number 1
Hose Barb Adaptor, 9.53 mm (3/8 in) hose x 12.7 mm (1/2 in) pipe
Number 1
Hose, 9.53 mm (3/8 in) I.D.
Length 3000 mm (120 in)
PVC Socket-to-Threaded, Female Adaptor, 12.7 mm (1/2 in) x 12.7 mm (1/2 in)
Number 2
PVC Socket Elbow 90°, 12.7 mm (1/2 in)
Number 3
PVC Socket Elbow 45°, 12.7 mm (1/2 in)
Number 2
PVC pipe, Schedule 80, 12.7 mm (1/2 in)
Piping Learning Systems, LabVolt Series
© Festo Didactic 33
Parameter Value
Number 6000 mm (240 in)
Adaptor, tube-to-female pipe, 9.53 x 12.7 mm (3/8 x ½"1/2 in)
Number 2
Nut, tube 9.53 mm (3/8 in)
Number 4
Nut, tube 6.35 mm (1/4 in)
Number 2
Copper Tube, 9.53 mm (3/8 in)
Length 4500 mm (180 in)
Copper Tube, 6.35 mm (1/4 in)
Length 3000 mm (120 in)
Reducing Union, tube-to-tube, 9.53 mm (3/8 in) to 6.35 mm (1/4 in)
Number 2
Thread Seal Tape
Number 10 rolls, 7600 mm/roll (300 in/roll)
Piping Learning Systems, LabVolt Series
34 © Festo Didactic
Reflecting the commitment of Festo Didactic to high quality standards in product, design, development, production, installation, and service, our manufacturing and distribution facility has received the ISO 9001 certification.
Festo Didactic reserves the right to make product improvements at any time and without notice and is not responsible for typographical errors. Festo Didactic recognizes all product names used herein as trademarks or registered trademarks of their respective holders. © Festo Didactic Inc. 2019. All rights reserved.
Festo Didactic SE
Rechbergstrasse 373770 DenkendorfGermany
P. +49(0)711/3467-0F. +49(0)711/347-54-88500
Festo Didactic Inc.
607 Industrial Way WestEatontown, NJ 07724United States
P. +1-732-938-2000F. +1-732-774-8573
Festo Didactic Ltée/Ltd
675 rue du CarboneQuébec QC G2N 2K7Canada
P. +1-418-849-1000F. +1-418-849-1666
www.labvolt.com
www.festo-didactic.com