Piping Engineer CV -Sandip Karmakar

6
Key Skills Strategic Planning & Management Vendor Management EPC Project Management Site Management Fabrication Erection & Commissioning Construction Management Resource Optimization Team Building & Leadership “Versatile, high-energy professional, offering over 5 years of dynamic career in Fabrication, Erection , Commissioning of Thermal & Gas Power plant HP,LP Piping ,scaling new heights of success with hard work & dedication and leaving a mark of excellence on each stepProfile Summary Incisive acumen in managing EPC project life-cycle right from development to delivery encompassing monitoring, inter-discipline co-ordination and resource planning. Pivotal in preparing master schedules for all projects including resource schedules, execution methodologies, milestones, cash flow projections and budgets Profound experience in planning & executing fabrication functions, performing tests & inspection for various processes and checking quality standards Leveraged skills in performing inspection for the fabricated pipelinesand fittings; verifying piping material identity (pipe, valves & fittings) and its conformance to the installation drawings Expertise in managing the Piping Fabrication & Site Installation with key focus on top & bottom line profitability by ensuring optimal utilization of resources Showcased excellence in preparing project estimate, finalizing contractors, checking the bills with estimated quantities and purchasing the materials for the site. Track record of successful completion of projects by developing positive rapport with architects, engineers, vendors & clients and controlling costs; flair for adopting modern construction methodologies / techniques in compliance with quality standards A leader with excellent communication, negotiation and relationship building skills Soft Skills Timeline Larsen & Toubro Ltd., Location SANDIP KARMAKAR Piping Engineer Fabrication | Erection & Commissioning [email protected] | [email protected]

Transcript of Piping Engineer CV -Sandip Karmakar

Page 1: Piping Engineer CV -Sandip Karmakar

Key Skills

Strategic Planning & Management

Vendor Management

EPC Project Management

Site Management

Fabrication

Erection & Commissioning

Construction Management

Resource Optimization

Team Building & Leadership

“Versatile, high-energy professional, offering over 5 years of dynamic career in Fabrication, Erection , Commissioning of Thermal & Gas Power plant HP,LP

Piping ,scaling new heights of success with hard work & dedication and leaving a mark of excellence on each step”

Profile Summary

Incisive acumen in managing EPC project life-cycle right from development to delivery encompassing monitoring, inter-discipline co-ordination and resource planning.

Pivotal in preparing master schedules for all projects including resource schedules, execution methodologies, milestones, cash flow projections and budgets

Profound experience in planning & executing fabrication functions, performing tests & inspection for various processes and checking quality standards

Leveraged skills in performing inspection for the fabricated pipelinesand fittings; verifying piping material identity (pipe, valves & fittings) and its conformance to the installation drawings

Expertise in managing the Piping Fabrication & Site Installation with key focus on top & bottom line profitability by ensuring optimal utilization of resources

Showcased excellence in preparing project estimate, finalizing contractors, checking the bills with estimated quantities and purchasing the materials for the site.

Track record of successful completion of projects by developing positive rapport with architects, engineers, vendors & clients and controlling costs; flair for adopting modern construction methodologies / techniques in compliance with quality standards

A leader with excellent communication, negotiation and relationship building skills

Soft SkillsTimeline

Larsen & Toubro

Ltd., Location as

Site Execution

SANDIP KARMAKARPiping Engineer Fabrication | Erection & Commissioning

[email protected] | [email protected]

+91 8670219586 | + 8801787664861 |+91 7720033694

Page 2: Piping Engineer CV -Sandip Karmakar

Knowledge Purview Making field quality plan, work Methodology, HIRA for both underground & above ground piping. Preparation of P&ID diagram from main drawing for loop hydro test. Preparation of Bill of material (system wise) for the project execution & issuing material from store. Marking the spools & joint numbers in piping isometric drawings & preparing line history sheets. Checking of isometrics & MTO w.r.t. P&IDs, line list, line sizing, equipment drawings, piping material

specification, etc Checking of vendor drawings & directly assist in purchasing of piping materials, utility packages. Monitoring the proper erection and commissioning of the projects. Monitoring and providing technical direction and assign work to supervisors & workers for specific piping

loops. Solving those problems faced by the workers during piping execution & giving technical solution to increase the

productivity. Monitoring daily base progress by making Daily progress report, Weekly planning, Monthly planning & 3

months planning. Directly executing the small bore, big bore, HP, Underground piping spool fabrication & Erection by following

isometric drawing, P&ID, Plot plan GA, 3D drawings. Installation of supports, valves, FT, orifice & other elements according to drawing. Fit up inspection, supports, valves installation inspection, making protocols & get it approved from clients. Giving front to heating, welding, cooling (if Alloy heavy wall piping) or welding, weld visual, wrapping coating,

Holiday testing, inside painting (if big bore underground cs piping). Preparation of loop field test (pneumatic or hydro) as per P&ID reference after getting mechanical clearance

paper signed from client. Handling all piping technical quarries, investigating all field piping related problems & giving resolution to

workers by paper communicating with engineering department. Ensuring that all punch list items are resolved & client handover is satisfactorily concluded so that there is no

prolongation of the projects. Ensuring all the safety to the workers by taking pep talk, make them educated about safety hazards & risks at

daily basis. Implements ‘’5S’’ (sort, straighten, shine, standardize, sustain) concepts at work place to improve safety &

Quality standards. Having knowledge about SMAW ,GMAW,FCAW,SAW welding process commonly used in the power projects Having knowledge about AWS codes, ASME codes B31.3,B16.4,B16.24,B36.19,B16.9 etc, IBR 1950 & familiar

With ASTM,BIS codes, Pipe fabrication institute, IEC,ISO ,API etc. Maintaining BOCW act (The Building and Other Construction Workers, Regulation of Employment and

Conditions of Service) in projects site & maintaining Safety Measures. Having knowledge of execution for the HP (Main stream, HRH,CRH,BFP ) heavy wall alloy P91,P22,P11,CS

pipes ,welding done by induction heating machine in 660 MW Thermal Power Plant. Having Knowledge of executing for Boiler & TG LP piping ( CS,SS,) both small bore & big bore in 660 MW Thermal

XIIfrom West Bengal Council of HigherSecondary

Education

2008 2011

Diploma in Mechanical

Engineering from West Bengal State

Council of Technical Education

Since Jul’11

Change Agent

Motivational Leader

Thinker

Collaborator

Communicator

Planner

Page 3: Piping Engineer CV -Sandip Karmakar

Power Plant. Having Knowledge of piping manufacturing of Power Plant, refinery projects (Power piping -Heavy Wall,

process piping, unit piping, utility piping ) from raw pipe (P91,WB36,P92,CS,SS) in Hazira Piping Center (L&T Power’s Workshop).

Worked with GRP ,CS Underground –CW ,ACW lines, CPVC,UPVC –DM Plant ,Fire Protection Underground, Fuel Oil piping in 360 & 210 mw Gas power Projects .

Having Knowledge about blasting, painting, wrapping coating, GRP piping joints. Associated with the Card board blasting, Chemical Cleaning & steam blowing etc commissioning procedures . Also having knowledge about preparing of work measurement sheet for Client billing, Contractors billings.

Work ExperienceSince Jul’11 Larsen & Toubro Ltd, as Site Execution Engineer - Mechanical

Growth Path / Deputations:

Jul’11 – aug’14 Diploma Engineer Trainee & Mechanical Engineer, L&T TPPC Ltd at 3x660 MW Talwandi Sabo Power Limited, Clint - SEPCO-1 (Owner-Vedanta), Bhatinda, Punjab, India

Aug’14 - Feb’15 Mechanical Engineer, 3x660 MW Koradi TPS Thermal Power Plant, (Owner - Mahagenco), Nagpur, Maharashtra, India, India

Feb’15 - Sep’15 Piping production Engineer, Hazira Piping Center, L&T Power’s workshop,Surat, GujratSep’15-Oct’15 Site Execution Engineer – Mechanical - 225 MW Sikalbaha gas Power Plant(dual fuel)

EPC contractor-L&T Power Ltd (Clint-BPDB) Chittagong, BangladeshOct’16 - present Site Execution Engineer – Mechanical - 360 MW Bheramara CCPP Power Plant(dual fuel)

EPC contractor-L&T Power Ltd (Clint-Marubeni Corporation, TEPSCO, Owner-NWPGCL) , Bangladesh

Key Result Areas: Administering activities like monitoring, weekly and monthly target preparation, calculation of ready work front

availability, allotting work material, reporting to clients about daily progress Mobilizing and demobilizing the required resources in line with the client’s safety & statutory requirements Working in coordination with contractor, vendors and client representation Preparing punch lists and following-up of the same, mechanical clearance of piping and inspection Coordinating the generation of procurement, fabrication and installation documentation (scopes of work, procedures,

drawings, sketches) Managing functions like contract management and contract administration including variation claims/change orders Identifying & providing resolutions for the technical queries and issues raised during the performance of offshore

construction and inspection activities . Monitoring the procurement & fabrication of the piping materials for ensuring the schedule, cost & quality standards are

being met sufficiently with the shut-down activities and normal construction execution. Responsible for working with construction supervisors during fabrication, erection, and testing, pre-commissioning &

commissioning activities, providing field engineering expertise on any installation problems Managing the preparation of fabrication and offshore construction "as-built" documentation packages.

Education Diploma in Mechanical Engineering from Sree Ramkrishna Shilpa Vidyapith, Suri, Birbhum, West Bengal State

Council of Technical Education with 81% in 2011 XII from Dhaniakhali Mahamaya Vidyamandir, Hooghly, West Bengal Council of Higher Secondary Education with

81% in 2008 X from Boso Priyanath high school, Hooghly Bengal Board of Secondary Education with 85% in 2006

IT Skills Microsoft Office (Word, Excel & PowerPoint), SAP Navisworks freedom review. AutoCAD (Package -2008 to 2015) Internet Applications

Page 4: Piping Engineer CV -Sandip Karmakar

Personal DetailsDate of Birth:18th October 1990Languages Known: Bengali, Hindi & EnglishAddress:Sandip Karmakar, Vill.+P.O-Boso, P.S-Dhaniakhali, Dist. Hooghly -712302, West Bengal, IndiaLinkedIn:https://bd.linkedin.com/in/sandip-karmakar-374032128Skype: [email protected]

ANNEXURE: PROJECTS

Project Title: L&T Power Ltd. (EPC Contractor) at Bheramara CCPP Project (360 MW) Combined Cycle Gas Plant, NWPGCL, Bangladesh

Period: Oct’2016 to till dateResponsibilities:

Responsible for total fuel oil piping & fire protection piping of HSD tanks. Working with BOP rack piping including DM water transfer, Instrument air etc process piping & utility piping.

Project Title: L&T Power Ltd. (EPC Contractor) at Shikalbaha Project (225 MW) Combined Cycle Gas Plant, BPDB, Bangladesh

Period: Nov’2015 to oct’2016Responsibilities:

Worked as site piping in charge of total under-ground fire protection system , CW & ACW system. Also responsible for fuel oil piping & inter connecting piping of Gas module 1 to GBC & GBC to GCS 3.

Highlights:Successfully accomplished:

Fire Protection under-ground piping & above ground piping of main plant with successfully flushing, hydro test. Completed fuel oil piping with successfully hydro test.

Project Title: L&T Power Ltd. (CCU) at 3x660 MW Koradi TPS Thermal Power Plant,(Owner-MAHAGENCO) Nagpur, Maharashtra, India

Period: Jun’15 – Nov’15Responsibilities: Steered efforts in fabrication & erection of Boiler LP Pipe including shoot blower piping of unit 8.

Project Title: Hazira Piping Center (workshop), (Owner-L&T Power) Surat, Gujarat, India

Period: Jan’2015 - Jun’2015Responsibilities: Acted as Shop Piping Production Engineer. Managed reliance J3 refinary & RRVUNL Power plant HP pipe fabrication work. Assisted in pipe fit up checking & welding inspection as per drawing.

Project Title: 3x660 MW Talwandi Sabo Power Limited, Clint – SEPCO - 1 (owner-Vedanta), Bhatinda, Punjab, India

Period: Jul’2011 - Jan’2015Responsibilities:

Worked as Diploma Engineer trainee in pressure parts fabrication & erection of upper straight wall, bottom spiral water wall for first 6 months.

Then shifted to Boiler piping work including Main steam, HRH,CRH, BFP heavy wall P91 & CS piping .there I learned HP piping work with my team member.

After completion my 18 months training then I took responsibility of BFP,CRH –heavy wall & boiler missleneous LP piping work.

After completion of HP piping I was responsible for TG steam extraction LP piping & CPU unit Piping (SS-big bore).

Highlights: Steered efforts in accomplishing:

o Successfully completed Main stream, HRH, CRH, BFP heavy wall piping including successfully Hydro test.o Completed TG Steam extraction lines with 100% RT & handed over to Client.o Successfully Completed the CPU system from installation to hydro test.

Page 5: Piping Engineer CV -Sandip Karmakar

o Associated with the Boiler & TG LP piping Chemical Cleaning process including making temporary loops.