Qatar Financial House for Consultations W.L.L Certified Management Accountant Course.
Pipes Technology Co. W.L.L., known as PIPESTECH, was ...pipestech.com/assets/pdf/PIPESTECH -...
Transcript of Pipes Technology Co. W.L.L., known as PIPESTECH, was ...pipestech.com/assets/pdf/PIPESTECH -...
Pipes Technology Co. W.L.L., known as PIPESTECH, was established in the state of Qatar since year 2003. PIPESTECH isregistered under new commercial registra�on number 83608.
namely ISO, DIN, SASO, ASTM and BS EN standards.
Khalifa Stadium
New Doha International Airport (NDIA)
Salwa Resort
North Gate Mall
Above Car Park & Extension (Landscape 151)
Doha East Corridor Landscaping
Ras Laffan - Fire Station
American Base
Coast Guard Base Bldg.
Al Messila Resort & VIP SPA
Duhail & Wind Tunnel Area
Barwa Village
Doha Metro Redline
The Pearl Villa
USA
FITTINGSPVC-U
The range of PVC-U products includes a complete series of solvent weld, threaded and adaptor fittings or pipes conveying fluids under pessure at maximum working temperatures not exceeding 60 °C.
uPVC Drainage System
ASTM DWV SYSTEM
USA
Range of uPVC above and below ground fullrange of Fittings in both Solvent Weld and RubberRing Joint according to theEuropean StandardsBS EN 1401 & BS EN 1329.
PVC - U | Manual, True Union Ball, Bu�erfly,Diaphragm, Threeway, Angel Seat, Checkand Air Release Valves Complying with thestandards UNI EN 1452 and observance tothe requirements of DIN 8063 and ENISO 15493 for the use of plas�c pipes inindustrial process and to ASTM D 1784 A.
ACTUATED VALVESI
EXTERIOR DIAMETERS - SPECIFICATIONS
Supply and installation of high density polyethylene pipes (HDPE) for non pressure underground pipelines,
made through the continuous coextrusion of two layers; the internal layer is smooth and of light blue colour
to facilitate visual inspection with telecameras, while the external layer must be corrugated and of black
colour.
The system (pipe+ joint) is fully compliant with EN 13476 standard and certified with product quality label
issued by an accredited, certifying third body, exterior nominal diameter DN/OD__* mm, annular rigidity
class SN__** (equal to__*kN/square metres) measured according to EN ISO9969 standard. The pipe is
produced by a company operating in compliance with the production quality system set forth by EN ISO
9001/2008 standard and with the environmental quality system according to EN ISO 14001/2004.
Each length of pipes must be equipped with socket connection or exterior sleeve with relative EPDM
compliant sealing gaskets in accordance to EN 681-1 standard, to position in the first groove between two
following.
The pipe carries the label as foreseen by EN 13476 standard and the following must be shown:
Test certifications on annular flexibility according to EN 13476 standard, using the testing method
described in EN 1446 standard
Certification of compliance with the environmental quality system (EN ISO 14001:2004)
Certification of production compliant with the corporate quality system (EN ISO 9001:2008)
Test certification on the hydraulic seal of the gaskets, according to EN 13476, using the test method
described in EN 1277.
Test certification on resistance to abrasion, veried according to DIN EN 295-3 standard
IIP certification of the connection system
Cable protection pipe conforms to IEC EN 50086-2-4/A1 (IEC 23-46/V1), and is IMQ and CE marked
as class N with crush resistance higher than 750N
CPVC| Chlorinated Polyvinyl Chloride Pipes, Fittings and Valves.
USA
Specialist Water Supply SystemsPP-R pipe system
This is Specialist Water Supply.
Together we can help you to
ensure reliability.
Wefatherm believes that acknowledging
the specific challenges you face - and
identifying and resources that are req-
uired to overcome them - is the first step
to protect this source.
Maintaining your reputation
For confidence, not compromise.
As a Consulting Engineer, your reputation depends on ensuringthe water
supply system you want installed delivers the expected quality and comfort.
When installing water supply systems, your position near the completion of
a project increases the pressure on getting the job done on time and on budget.
Through specialist water supply Wefatherm offers you the reassurance of
providing the right solution to tackle even the most complex challenges and
realise the outcome youwant - without being a slave to the services or limited
by the cost of high performance components.
*The Wefatherm PP-R pipe systems can be applied for typical domestic water supply systems:
Drinking water
Drinking water is considered fresh water
up to a temperature of 25°C for drinking
and preparing food.
Hot tap water
Hot tap water is heated drinking water up to a temperature of 60°C.
Sanitary applications
For domestic appliances, such assanitary flush systems, washingand irrigation, drinking water qualityis not required.
Wefatherm PP-R water supply systems have been used for
many years in areas of application where the pipe
s y s t e m h a s t o m e e t h i g h s t a n d a r d s o f d u -
rability and reliability. Numerous prestige buildings
have been equipped with a Wefatherm system. Over
25 years of experience in water supply systems, focussing
on innovation, quality and dedication: that is Wefatherm
GmbH.
Ensure reliability
Wefatherm has always been focussed on innovation and quality,
making ‘made in Germany’ more than just a phrase by really living
up to it. Offering a full range PP-R system and our latest development
of injection moulded large bore fittings are the living proof of this.
Leading the way through innovation and quality
Benefits of PP-RCT:
•
PP-RCT material has an improved stress resistance at elevated
temperatures with a minimum required strength (MRS) value of
11,2 MPa. And more impor tantly, the critical required strength
(CRS) at 70°C and 50 years is 5 MPa compared to 3,2 MPa
for standard PP-R. PP-RCT pipe systems can be operated at
higher operating pressures, ranging from factor 1,25 to 2,5
at
temperatures >60°C.
•
The improved long-term strength of the PP-RCT material leads to
a more economic set of dimensions of the pipe system. It enables
designers to select thinner wall pipes with an increased flow
capacity or smaller diameter pipes.
Lighter pipe systems are easier and quicker to install.
•
Not least important, the substantially lower material usage provides
an additional contribution to the conservation of resources supporting
a sustainable environment.
Same OD Same ID
Wefatherm water supply systems ensure:
• hygienic reliable drinking water
• long term undisrupted system use
• avoiding nuisance like noise
• preventing loss of water or wasting energy
Naturally, you want peace of mind after the design and installation of your water supply systems. Wefatherm’s combination
of up-front training of consulting engineers and installers, together with on-site project support and on-site inspections (if required),
means that working with Wefatherm provides you with maximum quality installed.
Quality Systems
Setting the standard
PP-R
Benefits of PP-R:
•
Service life according to tests performed under ISO 15874
• No contact corrosion when exposed to iron particles
• Taste and odor neutral
• Bacteriologically neutral
• Fast and easy installation
• Entire plastic systems available
• Good chemical resistance
• Low tendency to incrustations
For more than 30 years, Polypropylene Random Copolymer (PP-R) has been applied successfully for hot and cold water
applications in countries worldwide. The combination of properties such as resistance to internal pressure, flexibility and
impact have made PP-R the material of choice for a safe and reliable long-lasting installations. No wonder that PP-R has been
continously replacing traditional materials like copper and galvanized steel over the last decades.
The Wefatherm PP-R pipe systems is developed and man-
ufactured within an ISO 9001 Quality Assurance system
and complies with the ISO15874 and DIN8077/8078
standards. And they are certified by DVGW and carries
numerous international recognized approvals.
Quality Products Quality People
the application of leading technologies.
PP-RCT is the abbreviation for Polypropylene Random Copolymer with modified crystalline structure and enhanced temperature
performance. The special fine and homogenous crystal structure of the PP-RCT material improves the mechanical characteristics
of the material.
PP-RCT
Specialist Water Supply SystemsPP-R pipe system
Acoustic Soil & Waste System
Akatherm dBlue designed for noise reduction
The Akatherm dBlue system is made from a state-of-the-art combination of plastic and sound absorbing mineral
filler (PP-MD) to maximize absorbance of sound. The material formula is developed by the Aliaxis R&D laboratory
and offers a unique combination of acoustic performance, weight, resistance and mechanical strength.
The triple-layer pipe structure is produced using the latest co-extrusion technology Each layer has its own function
optimised to reduce sound levels, increase mechanical characteristics and improve the drainage flow.
Used in conjunction with dBlue acoustic brackets, the system effectively uncouples the vibrations and greatly reduces
noise and acoustic vibrations down to a level of 18 dB. This makes it ideal for residential housing, multi occupancy
apartments as well as hospitals, hotels and other commercial buildings, where reduced noise levels are required.
Comfort of living
Speed of installation
End users gain more comfort of living withAkatherm dBlue. The system is optimisedfor acoustic comform using the latest productiontechniques, ensuring an installation that meetsthe most stringent noise regulations.
A distinctive benefit of Akatherm dBlue is thefast installation. Easy to use and secured socketconnections minimize installation time of eachjoint without further use of electrical toos.
Proven systems
It’s high resistance against heat and chemicals,unique products for high-rise, underground approvaland dimension up to 200mm enable Akatherm dBlueto be used as a single system installation in a broadrange of applications.
Freedom of application
Akatherm dBlue is a high quality acoustic soil & wastesystem produced in conformity with the En1451. Itmeets national and international quality and safetystandards.
State-of-the-art
material formula
Latest co-extrusion
technology
High noise
reduction
min max
EN13501
Fire class measurement
EN14366
Noise measurement
ISO 9001
Quality
management system
®
ISO 14001
Environmental
management system
®
Germany Australia Sweden Ukraine Czech Republic Poland
Best placed in the raceRobust, complete and installation friendly
Material advantages
High noise reduction without insulation High resistance to waste water
temperatures up to 90°C (peak 95°C)
High chemical resistance ranging
from pH2 to pH12
90°C
0°C
Triple layer pipe is rigid, noise-
attenuated with a smooth bore that
resists incrustation and blockages
Sustainable system
100% recyclable
ISO 14001 certified company
More acidic
Neutral
More alkaline
2
12
Installation possible at temperatures
down to -10°C
System advantages
dBlue acoustic brackets with rubber
lining reduce acoustic vibrations to a
minimum
Fast installation of rubber ring joints
without additional tools
No vent stack required in multi-storey
buildings using the Akavent single
stack system
Transitions to PVC, PP-HT and HDPE
possible without additional transition
fittings required
Rubber ring joint increases flexibility of
the pipe system during ground movement
or earthquake
Snap cap technology with tight rubber
ring containment and installation angle
indication
PVC
PP-HT
HDPE
min max
Acoustic Soil & Waste System
Quality and certification
Akatherm dBlue is developed and manufactured within an ISO 9001 Quality Assurance system and complies with the EN 1451
and other relevant international standards as well as meeting numerous national approved quality and safety standards.
Proven results meeting strictest requirementsTests and measurements of noise emitted by the Akatherm dBlue system were conducted according to the European standard EN 14366 ‘Laboratory measurement of noise from waste water installations’.
The Akatherm dBlue system is certified at a noise transmission level of 18dB at a water flow of 4 dBluel/s using acoustic brackets with rubber lining.
The 18 dB is measured at the bottom floor in the room next to the downpipe where the soil & waste flow and resultingnoise levels are highest, especially in multi-storey living apartments or high-rise buildings that have a combined soil&waste flow.
All tests were carried out in the accredited institute for buildings physics Fraunhofer in Germany. Results are available in test report P-BA 26/2016e.
FAF Valve, exporting it’s products to more than 40 countries, has made reflecting it’s internationalprofessional discipline and corporate business ethics on it’s entire activities the driving force whichcoerces the domestic industry into continuous development. FAF Valve, with the increase in thenumber of countries to which its products are exported, continuously growing foreign trade volumeand it’s brand awareness in every part of the world, is now a company which has its name ratherfrequently mentioned throughout the international market.
•
•
•
•
•
FAF Valve, standing on its journey to quality in which unlimited customer satisfaction is targeted withits technology and R&D-oriented perspective has certified its quality with;
ISO 9001 Quality Management System Certificate,
CE Marking, PED (Pressure Equipments Directive)
Conformity,
GOST Russia Quality Certificate
API 6D Monogram License
TSE Certificates
FAF Valve, with its experienced and reliable administrative staff, dynamic and productive engineeringteam and other personnel attached to their jobs, aims to keep its quality always at the highest level.
Particular attention attached to promotion and training, fair organizations conducted both at domesticand international levels, up-to-date promotional materials , training seminars delivered by it, tries toraise the knowledge and awareness of its clients on its products and proper use of the same.
With its stability in delivery and payment-related issues, wide-spread dealer network and warm re-lationship with its clients, is known as a reliable and respected company in this industry.
Quality control is the most important indispensable for all the processes. 100% of the products manu-factured by FAF Valve undergoes hydrostatic pressure resistance and tightness tests. Perfect mecha-nical processing equipment and testing devices ensure the reliability and durability of the products.
SWING CHECK VALVE / 2270
BUTTERFLY VALVE / 3650LUG-DUCTILE DISC
PRODUCTION STANDARDS
DESIGNEND CONNECTIONFACE TO FACE
TESTMARKING
TS EN 593FLANGED TS EN 1092-2 / ISO 7005-2 TS EN 558 Seri 20 ISO 5752 Seri 20TS EN 12266-1 TS EN 19
PN 16DN 40 DN 300
LIFT TYPE CHECK VALVE / 2250
PRODUCTION STANDARDS
DESIGNEND CONNECTIONFACE TO FACETESTMARKING
TS EN 12334FLANGED TS EN 1092-2 / ISO 7005-2 TS EN 558 Seri 1 / DIN 3202 F1TS EN 12266-1 TS EN 19
DN15 DN250PN 16
GLOBE VALVE / 2100
PRODUCTION STANDARDS
DESIGNEND CONNECTIONFACE TO FACETESTMARKING
TS EN 13789FLANGED TS EN 1092-2 / ISO 7005-2 TS EN 558 Seri 1 / DIN 3202 F1TS EN 12266-1 TS EN 19
PN 16DN15 DN250
PN 16DN40 DN600
COUPLING / 3920
GATE VALVE / 6100RESILIENT SEATED - CAST IRON (F4)
PRODUCTION STANDARDS
DESIGNEND CONNECTIONFACE TO FACETESTMARKING
TS EN 1171FLANGED TS EN 1092-2 / ISO 7005-2 TS EN 558 Seri 14 / DIN 3202 F4
TS EN 12266-1 TS EN 19
PN 10 -16DN40 DN600
GATE VALVE / 6200RESILIENT SEATED - DUCTILE IRON (F5)
PRODUCTION STANDARDS
DESIGNEND CONNECTIONFACE TO FACETESTMARKING
TS EN 1171FLANGED TS EN 1092-2 / ISO 7005-2 TS EN 558 Seri 15 / DIN 3202 F5 TS EN 12266-1 TS EN 19
DN50 DN600PN 10 - 16
PRODUCTION STANDARDS
DESIGNEND CONNECTIONFACE TO FACE
TESTMARKING
TS 3148 / DIN3357FLANGED TS EN 1092-2 / ISO 7005-2 TS3148 Sheet2 DN15..DN150 TS EN 558 Seri 14 / DIN3202 F4 DN200..DN250 TS EN 558 Seri 27 / DIN3202 F5TS EN 12266-1 TS EN 19 / TS 3148
PN 10 - 16DN15 DN250PN DN
BALL VALVE / 1100PN10/16 - FLANGED
BUTTERFLY VALVE / 3800FLANGED - DOUBLE ECCENTRIC
DN100 DN2000PN10-16-25
PRODUCTION STANDARDS
DESIGNEND CONNECTIONFACE TO FACETESTMARKING
TS EN 593FLANGED TS EN 1092-2 / ISO 7005-2 TS EN 558 Seri 14 / DIN 3202 F4 TS EN 12266-1 TS EN 19
TILTING CHECK VALVE / 2280
PRODUCTION STANDARDS
DESIGNEND CONNECTIONFACE TO FACE
TS EN 12334FLANGED TS EN 1092-2 / ISO 7005-2 TS EN 558 Seri 14 / DIN 3202 F4TS EN 12266-1 TS EN 19
PRODUC
TESTMARKING
PN10-16DN200 DN1600
FOOT VALVE / 7200
PN 16DN100 DN600
DISMANTLING JOINT / 3900
PRODUCTION STANDARDS
END CONNECTIONTESTMARKING
FLANGED TS EN 1092-2 / ISO 7005-2TS EN 12266-1 TS EN 19
DN100 DN2000PN 10 -16 -25
DUAL CHECK VALVE / 2350
PRODUCTION STANDARDS
DESIGNEND CONNECTIONFACE TO FACETESTMARKING
TS EN 12334WAFER TYPE TS EN 1092-1 / ISO 7005-1 TS EN 558 Seri 16TS EN 12266-1 TS EN 19
DN40 DN400PN 16
PN 16DN15 DN250
AIR RELEASE VALVE / 7300
KNIFE GATE VALVE / 6500
DN50 DN600PN 10-16
PRODUCTION STANDARDS
END CONNECTION
TEST
MARKING
FLANGED TS EN 1092-2 / ISO 7005-2
TS EN 12266-1
TS EN 19
PN 10-16DN25 DN600
PRODUCTION STANDARDS
DESIGNEND CONNECTIONFACE TO FACETESTMARKING
TS 10879 / DIN 30680 FLANGED TS EN 1092-1 / ISO 7005-1 TS 10879TS 10879TS 10879 / TS EN 19
FLEXIBLE RUBBER JOINT / 5050