POWER TOOLS CATALOG - Hitachi Koki Global · POWER TOOLS CATALOG 2017-2018 2017-2018 1707
PipeHunter Tools Catalog 2009
-
Upload
stan-stoneman -
Category
Documents
-
view
272 -
download
4
description
Transcript of PipeHunter Tools Catalog 2009
Sewer Cleaning Parts & Accessories2009 Catalog
2 PipeHunter Tools - Revision 3
3-6 Nozzles
7 Nozzle Accessories
8 Hose Protection
9 Jet Hose
10-11 Water Pump
12 Engine Shrouds & Guards
13 Hose Repair
14 Hose Repair
15 Hydraulic Components
16 Hose Reel Components
17 Vacuum Tubing
18 Vacuum Hose
19 100 Gallon Vacuum Tank
20 500-700 CFM Vacuum Package (Newer)
21 500-700 CFM Vacuum Package (Older)
22 Power Group
23 Water System
24 Ball Valves
25 Fire Hydrant Accessories
26 Handgun Accessories
27-29 Lighting & Electrical
30 Tool Boxes & Hardware
31 Towing & Trailer
32 Terms & Conditions
Toll Free: 800.373.1318
Sanitary Nozzle - 15 deg. JetsPipeHunter standard nozzles, built tough for production. Stainless stell construction for longer life.
3007-4013 1/2” 15 deg.
3007-4152 3/4” 15 deg.
3007-4156 1” 15 deg.
3007-4070 1-1/4” 15 deg.
Nozzles
Sanitary Nozzle - 30 deg. JetsPipeHunter standard nozzles, built tough for production. Stainless steel construction for longer life.
3007-4014 1/2” 30 deg. rear jets
3007-4153 3/4” 30 deg. rear jets
3007-4157 1” 30 deg. rear jets
3007-4071 1-1/4” 30 deg. rear jets
3PipeHunter Tools - Revision 3
Penatrator Ellipse NozzleProven design for proven results. (Available 18-80 GPM, 1250-4000 PSI)
3007-4020 1/2” 6 rear jets, 4 forward jets
Toll Free: 800.373.1318
Ellipse NozzleProven design for proven results. (Available 18-80 GPM, 1250-4000 PSI)
3007-4013 1/2” 6 rear jets
3007-4152 3/4” 6 rear jets
3007-4156 1” 6 rear jets
Toll Free: 800.373.1318
Nozzles
4 PipeHunter Tools - Revision 3
Grease NozzleMade from billet aluminum stock for longer wear life, designed to help
penetrate and flush blockages. Optional forward jets. (2000 & 3000 PSI)
3007-4093 1/2” 5 replaceable rear jets
3007-4098 3/4”
Long John NozzleDesigned to flush sand and move heavy debris downstream.
3007-4034 3/4” 6 replaceable rear jets
Nozzle Know HowThe average nozzle only last approximately 18 monthsNozzles with drilled orifices don’t have surfaces hard enough to hold up to high-pressure water for extended periods. This means that everytime you use that drilled nozzle it is getting progressively more inefficient. The more worn out the orifices become, the less thrust your jetter will produce. Find out how replaceable jets can improve your nozzles longevity.
Nozzles need to be properly setup for your jetter flow & pressureThe orifice size and quanitity all contribute to your jetter working like it was designed to. The proper jet configuration is important to your engine and pump working longevity. Contact us or your local equipment dealer to have a calculation run to show you how your jetter could generate more thrust, use less fuel and last longer. A flowmeter is necessary to calculate the exact flow at the end of the jet hose due to friction pressure loss.
The wrong nozzle can make a jetter succeed or completely fail Your pump, engine and chassis are all maintained like they should be, but your jetter just isn’t performing like it used to... Your nozzle has probably worn out. Keep that hose running off the reel and make cleaning passes fast with a properly setup nozzle. An optimized nozzle can make a big differ-ence with equipment that spends everyday out in the field. Find out how a great nozzle can make a great piece of equipment as well.
5
Aluminum Sand NozzleExcellent nozzle for sand and gravel removal, extended life construction. Available Cast, Solid, or Milled (Customer specifications required when ordering)
3007-4159 1” without jets, drilled for 8 rear, 1 forward
3007-4166 3/4” 8 rear jets, optional forward jet
Intruder NozzleGood pipe flushing nozzle stays down on floor to help flush heavy debris out. Customer must specify hose size and pressure. Pressure from 1250-4000 PSI.
3007-4167 1/2” 6 (15 & 30 deg rear jets)
3007-4168 3/4” 6 (15 & 30 deg rear jets)
Floor Cleaning NozzleCulverts and large pipe can be knocked out efficiently with this heavy duty nozzle. Optimal jet angles and cleaning power towards the floor make this a must for storm drain cleaning.
7709-2100 1” 10 rear replaceable rear jets
Nozzles
Cage NozzleGreat nozzle for storm drain and culvert maintenance. 3000 PSI
3007-4082 3/4” 12 rear dual angle jets
3007-4083 1” 12 rear dual angle jets
Toll Free: 800.373.1318
Nozzles
ENZ manufactures the highest quality nozzles on the market today. A wide variety makes any ENZ nozzle a sure fix for your unique jetting projects.
PipeHunter Tools - Revision 3 Toll Free: 800.373.13186
7PipeHunter Tools - Revision 3
Nozzle Skids & Extensions
Toll Free: 800.373.1318
Nozzle Rack7600-0084 For 1/2” Nozzles
7600-0083 For 3/4” Nozzles
7600-0264 For 1” Nozzles
Nozzle Fin Skids for 1/2” Systems
1/2” Tubing 3007-9000 6” line
1/2” Tubing 3007-9001 8” line
1/2” Tubing 3007-9002 10” line
1/2” Tubing 3007-9003 12” line
1/2” Tubing 3007-9004 14” line
Nozzle Fin Skids for 3/4” Systems
3/4” Tubing 3007-9100 6” line
3/4” Tubing 3007-9101 8” line
3/4” Tubing 3007-9102 10” line
3/4” Tubing 3007-9103 12” line
3/4” Tubing 3007-9104 14” line
Nozzle Fin Skids for 1” Systems
1” Tubing 3007-9200 6” line
1” Tubing 3007-9201 8” line
1” Tubing 3007-9202 10” line
1” Tubing 3007-9203 12” line
1” Tubing 3007-9204 14” line
PipeHunter Tools - Revision 38
Hose Protection
Flexible Hose Guide or Tiger Tail3007-7000 3” x 36”3007-7001 2” x 36”
Upper Manhole Roller8400-1401
Easement Roller3007-7503A
Lower Manhole Shoe9000-0126S
Lateral ReelManual or electric cart that is mounted to unit
for easy access. (200 ft of 1/2” hose)
3004-8001 Manual
3004-8019 Electric
Toll Free: 800.373.1318
Lateral Reel CartManual cart capable of carrying 200’ of 1/2”
hose. Dimensions (width of reel)
3004-8000 12”
3004-8001 24”
9PipeHunter Tools - Revision 3
Jet Hose & Fittings
1” Jet HoseLength PSI Color Bend Radius Parker Part # Cobra Part #
400 2000 Blue 8” PH-162040 CH-162040
500 2000 Blue 8” PH-162050 CH-162050
600 2000 Blue 8” PH-162060 CH-162060
800 2000 Blue 8” PH-162080 CH-162080
1000 2000 Blue 8” PH-162010 CH-162010
3/4” Jet Hose Length PSI Color Bend Radius Parker Part # Cobra Part #
400 3000 Orange 4” PH-123040 CH-123040
500 3000 Orange 4” PH-123050 CH-123050
600 3000 Orange 4” PH-123060 CH-123060
800 3000 Orange 4” PH-123080 CH-123080
1000 3000 Orange 4” PH-123010 CH-123010
1/2” Jet HoseLength PSI Color Bend Radius Part # Cobra Part #
400 4000 Green 4” PH-084040 CH-084040
500 4000 Green 4” PH-084050 CH-084050
600 4000 Green 4” PH-084060 CH-084060
800 4000 Green 4” PH-084080 CH-084080
1000 4000 Green 4” PH-084010 CH-084010
Leader Hose
1/2”
35
00 PS
I
3009-4537 10 Ft.
3009-4538 15 Ft.
3009-4539 20 Ft.
3009-4540 25 Ft.
1/2”
40
00 PS
I
3009-4537-1 10 Ft.
3009-4538-1 15 Ft.
3009-4539-1 20 Ft.
3009-4540-1 25 Ft.
3/4”
30
00 PS
I
3009-4549 10 Ft.
3009-4523 15 Ft.
3009-4524 20 Ft.
3009-4525 25 Ft.
1”
2000
PSI
3009-4528 10 Ft.
3009-4529 15 Ft.
3009-4530 20 Ft.
3009-4531 25 Ft.
Toll Free: 800.373.1318
Water Pump Parts
PipeHunter Tools - Revision 310 Toll Free: 800.373.1318
Giant PumpParts, Accessories &
Service
GP513240 GPM @ 3000 PSI
LP20018 GPM @ 3000 PSI
GP7255A60-80 GPM @ 2000 PSI
LP30118-25 GPM @ 4000 PSI
GP714550-60 GPM @ 3000 PSI
LP12340 GPM @ 2000 PSI
Why Giant?Unique Gear End
Giant continues to service pumps that have been in the fi eld forover twenty years. Very
expensive materials are standard, such as spheroidal cast iron crankcase gear ends.
Critical components such as crankshafts are forged, ground, tumbled and hardened. Tapered roller bearings evenly distribute
the forces throughout the gear end. Toughbronze connecting rods not inexpensive
aluminum lead to crossheads which guide the machined and hardened stainless steel
plunger bases to provide a smoothoperation and less wear on manifold
components.
Great Fluid EndGiant’s manifold is designed with the right
materials to meet your needs. Materials such as Nickel-Aluminum-Bronze, 303 and 316 Stainless Steel, Duplex Steel
and Titanium give you the fl exibility to withstand the harshest fl uid media. With
larger surface areas and expertly machined manifolds, Giant’s pumps not only are
quieter but run with greater effi ciency and less chance of cavitation.
Water Pump Parts & Service
11PipeHunter Tools - Revision 3
Air Purge Valve3020-3011 1/4”
Anti-freeze System7600-5150 Complete Assembly
Vactor® Jet Rodder Parts & Accessories
Vactor® Rodder pump parts, assemblies and valves for any combo truck.
Pump Retrofitting, Rebuilding & Refurbish Services
We can rebuild and refurbish your original pump or just replace it with a new one. Our fully equipped shop can handle it.
Toll Free: 800.373.1318
Stainless Check Valves3012-0125 1/4”
3020-0017 3/8”
3020-0070 1/2”
3020-0016 3/4”
Shrouds and Guards
12 PipeHunter Tools - Revision 3
John Deere Engine Shrouds
7600-5282A 49 HP Standard Alum
7600-5282S 49 HP Standard Steel
7600-5282AD 49 HP Full Alum
7600-5282SD 49 HP Full Steel
7600-5280A 80 HP Standard Alum
7600-5280S 80 HP Standard Steel
7600-5280AD 80 HP Full Alum
7600-5280SD 80 HP Full Steel
7600-5104A 115 HP Standard Alum
7600-5104S 115 HP Standard Steel
7600-5104AD 115 HP Full Alum
7600-5104AS 115 HP Full Steel
7600-5283A 125 HP Standard Alum
7600-5283S 125 HP Standard Steel
7600-5283AD 125 HP Full Alum
7600-5283AS 125 HP Full Steel
Perkins Engine Shrouds
7600-PER50A 49 HP Standard Alum
7600-PER50S 49 HP Standard Steel
7600-PER50AD 49 HP Full Alum
7600-PER50AS 49 HP Full Steel
Isuzu Engine Shrouds7600-5008A 83 HP Standard Alum
7600-5008S 83 HP Standard Steel
7600-5008AD 83 HP Full Alum
7600-5008AS 83 HP Full Steel
Toll Free: 800.373.1318
Fender7600-3844-SFA Single - Alum
7600-3844-SFS Single - Painted Steel
7600-7844-TFA Tandem - Alum
7600-7844-TFS Tandem - Painted Steel
Caterpillar Engine Shrouds
7600-PER50A 51 HP Standard Alum
7600-PER50S 51 HP Standard Steel
7600-PER50AD 51 HP Full Alum
7600-PER50AS 51 HP Full Steel
Hose Repair
13
Manual CrimperSQ-101-SW Crimper
Dies and Pushers
SQ-101-12S6/S9 12 Size die for S6 and S9
SQ-101-12P 12 Size pusher
SQ-101-16S6 16 size die for S6 hose
SQ-101-16P 12 Size pusher
SQ-101-20S6 20 Size die for S6 hose
SQ-101-20P 20 Size die pusher
PipeHunter Tools - Revision 3Toll Free: 800.373.1318
Universal SwageUNIVERSALSWAGE Swage
Dies and Pushers
SQ-101-12S6/S9 12 Size die for S6 and S9
SQ-101-12P 12 Size pusher
SQ-101-16S6 16 size die for S6 hose
SQ-101-16P 12 Size pusher
SQ-101-20S6 20 Size die for S6 hose
SQ-101-20P 20 Size die pusher
Cobra Hose SwagePF681 Swage
Dies and Pushers
4540-H30800 1/2” Die
8P 1/2” Pusher
4540-H1200 3/4” Die
12P 3/4” Pusher
4540-H1600 1” Die
16P 1” Pusher
Hose Repair Fittings
14 PipeHunter Tools - Revision 3
Parker Portable Hydraulic KrimperA great tool for keeping jetters out in the field and out of the shop. This flexible krimper can krimp hydraulic hose or jet hose. It can also be installed on the equipment to give a solid place for operators to work.
94C-001-PFD Krimper
Die
80C-P08H 1/2” 4000 PSI
80C-P12H 3/4” 2500 or 3000 PSI
80C-P1450 1” 2500 PSI
80C-P1490 1” 3000 PSI
Toll Free: 800.373.1318
Important notice regarding mender and hose fittings: Hose fittings and manufacturers are NEVER to be mixed. Each manu-facturer has their own unique standard for kimping and mending. Fittings may burst from hose ends if they are mixed or improperly installed.
Mender FittingsThe best way to repair your damaged hose without replacing the entire roll. Swage required for repairs using this fitting. Contact us directly so that we can specify which manufacturer specific fittings your hose requires.
Hose End FittingsGreat hose end fittings for any manufacturer of sewer jetting or hydraulic hose. Make sure these are krimped with the correct dies and pushers as well.
PipeHunter Tools - Revision 3
Hose Reel Components
15
Direct Drive Coupling(reel side)
3010-0545
Direct Drive Insert3010-0546 (brass)
Direct Drive Coupling(motor side)
3010-0544
Hose Reel Brake3004-0149 Complete Assembly
3007-2161 Pads
Hose Reel Bearing8000-0394 8” ID
8000-0393 10” ID
Hose Reel Sprocket3016-0031 Single
3016-0009 Dual
90 deg “Tank” Swivel2-year warranty included for all sewer clean-
ing applications. Call for more information
24.100U 1”
90 deg TM Style Swivel3020-0101 3/4”
3020-0113 1”
663-0002 1-1/4”
Aeroquip™Style Swivel3020-0124 3/4”
3020-0125 1”
Toll Free: 800.373.1318
Hose Reel Components
16 PipeHunter Tools - Revision 3
SAFETYLANYARD
VOLTMETER
0
1000
20003000
4000
5000
PSI
0
5
10
15 20
25
30
35
RPM
WATER PSI
3000 PSI
MURPHY SWITCHSTROBE
BRAKE
WORKLIGHT
IGNITION
Motor Guard7600-5060AA - Alum7600-5060AS - Steel
Manual Throttle9000-0157 Trailer9000-0156 Truck
Multi-Flow Valve3012-0001
Quick Disconnect3004-1065
Main Water Valve3020-0003
Safety Lanyad Switch3004-6018
Hose Reel DirectionalValve8000-0632
Level Wind8000-0499
Manual Footage Counter9000-0006S
Swivel Guard7600-5060AA - Alum7600-5060AS - Steel
2-Bolt Hydraulic Motor3010-0026
4-Bolt Hydraulic Motor3010-0001
2-Bolt Hydraulic Motor3010-0026
Toll Free: 800.373.1318
Vacuum Tubing
17PipeHunter Tools - Revision 3
8” Aluminum Tubing with Welded Aluminum Flanges
8” x 36” FLA-836
8” x 48” FLA-848
8” x 60” FLA-860
8” x 72” FLA-872
8” x 84” FLA-884
8” x 96” FLA-896
8” Aluminum Tube with Welded Flange & Crown End
8” x 36” FCR-836
8” x 48” FCR-848
8” x 60” FCR-860
8” x 72” FCR-872
Quick ClampCCL8QC 8” Vactor Style
CCL8VCCQC 8” J-Hook Style
King Bolt ClampKBC-8VA 8” Vactor Style
KBC-8VC 8” J-Hook Style
Power ClampCCL8 8”
CCL6 6”
Toll Free: 800.373.1318
3” Aluminum Tube with Cam-lock Flange
3” x 36” M x F CAL-336
3” x 48” M x F CAL-348
3” x 60” M x F CAL-360
3” x 72” M x F CAL-372
3” x 36” F x Crown CCR -336
4” Aluminum Tube with Cam-lock Flange
4” x 36” M x F CAL-436
4” x 48” M x F CAL-448
4” x 60” M x F CAL-460
4” x 72” M x F CAL-472
4” x 36” F x Crown CCR-436
PipeHunter Tools - Revision 3
Vaccuum Hose
18
Clear Reinforced Vacuum Hose
Hose sold by the foot
15-SPIRO 1100 3 3” ID
15-SPIRO 1100 4 4” ID
15-SPIRO 1100 6 6” ID
Black Reinforced Vacuum Hose
Hose sold by the foot
15-SPIRO 1100 3 3” ID
15-SPIRO 1100 4 4” ID
15-SPIRO 1100 8 8” ID
Lay Flat HoseHose sold by the foot
15-LAYFLAT 3” 3”
15-LAYFLAT 4” 4”
15-LAYFLAT-R-6” 6”
15-LAYFLAT -R-8” 12”
Gate Valve3020-3007 2”
3020-5076 2.5”
3020-3014 4”
Knife Valve3040-0005 3”
3040-0034 4”
3040-0031 6”
Toll Free: 800.373.1318
Gray Reinforced Vacuum Hose
Hose sold by the foot
3008-0004 3/4” ID
3008-0003 1 ” ID
3008-0006 1-1/2” ID
3008-0002 2” ID
3008-0016 2-1/2” ID
19PipeHunter Tools - Revision 3
Footage Counter & Levelwind
Handy Clam Scoop3007-6000 6’ extension
3007-6002 8’ extension
3007-6003 10’ extension
3007-6004 12’ extension
3007-6005 14’ extension
3007-6006 16’ extension
3007-6007 18’ extension
Counter BracketCompatible with all PipeHunter™ equipment
9000-0006SCounter Clockwise
Counter
9000-0006A Clockwise Counter
Standard LevelwindDesigned for heavy use applications.
8000-0499 Complete Assembly
3004-3205 Rubber Roller
Jet Eye LevelwindBuild specifically for the Jet Eye™ camera
system.
JE-LEVELWIND Description
Counter BracketCompatible with Vac-Con© equipment
9000-0006-2Counter Clockwise
Counter
7600-5067-1 Clockwise Counter
Manual CounterCompatible with Vactor© equipment
3004-3517Counter Clockwise
Counter
3004-3518 Clockwise Counter
Toll Free: 800.373.1318
Manual CounterCompatible with all brackets listed here.
3004-3516Counter Clockwise
Counter
3004-3511 Clockwise Counter
20 PipeHunter Tools - Revision 3
100 Gallon Vacuum System
Knife Valve3040-0005
Knife Valve Handle3040-0055
Cam-Lock Cap3008-4 3 DCAL
Wingnut Assembly3040-0062 Wingnut3040-0063 Washer3040-0064 Eye-bolt3040-0066 Roll pin
Vacuum Gauge3001-0230
Rubber Handle3004-3072
Manway Door1010-6001 Door1019-0010 Gasket1019-6003 Debris Screen
Viewer Bulb3040-0015
4” Lay-Flat Hose15-LAYFLAT 8’
Debris Door Screen7600-5241
Toll Free: 800.373.1318
21PipeHunter Tools - Revision 3
500-700 CFM Vacuum Package (Updated Design)
Final Filter Screen 7600-FFH9 9” x 9” Filter
3040-0072 9” Filter Screen
7600-FFH11 11” x 11” Filter
3040-0050 11” Filter Screen
Toll Free: 800.373.1318
22 PipeHunter Tools - Revision 3
500-700 CFM Vacuum Package (Original Design)
Relief Valve3040-0017
Silencer3006-0513 Silencer19-35907 4” Rain Cap19-35752 4” Clamp7600-0177 Bracket
Filter Assembly Pad7600-5100-1
Hyd. Motor Bracket7600-5100-2
Coupler Guard7600-5152
Wingnut Assembly3040-0062 wingnut3040-0063 washer3040-0064 eye-bolt3040-0066 roll pin
Vacuum Hose15-SPIRO 125 3” (3“)15-SPIRO-920-4” (4”)
Filter Door1021-1200 Door1019-0009 Gasket
Filter assembly with door removed
Filter3040-0072 Filter Assem.3040-0058 Mesh Filter
Hydraulic Motor3010-0048 500 CFM3010-0056 700 CFM
Toll Free: 800.373.1318
Water System
Handgun Relief Valve3020-0006A 1/2”
3020-0005 3/4”
Unloader Valve22973C 1/2” 4000 PSI
Relief Valve3020-0001 2000 - 3000 PSI
3020-0004 4000 PSI
Y-Strainer Screen3020-7081 30 Mesh Yellow
3020-7051 50 Mesh Green
3020-7080 80 Mesh Blue
for strainers: 2”& 3”
23PipeHunter Tools - Revision 3
4000 800
Poly Y-Strainer3020-7052 2” Complete Assembly
3020-7053 2” O-Ring
3020-7050 2” Strainer Cap
3020-7069 3” Complete Assembly
3020-7056 3” O-Ring
3020-7068 3” Strainer Cap
Toll Free: 800.373.1318
Poly Bulkhead Fitting3013-0205 1/2” ID
3013-0236 3/4” ID
3013-0201 1.5” ID
3013-0203 2” ID
3013-0204 3” ID
Ball Valves
24
2-Way Ball Valve662-0106 3/4” 2000 PSI
1” 2000 PSI
3-Way Ball Valve3020-3032 1/4”
3020-3025 3/8”
3020-3050 1/2”
3020-0003 3/4”
3020-0002 1”
2-Way Poly Ball Valve3020-3029 1.5”
3020-3030 2”
3020-3027 3”
2-Way Ball Valve3020-3004 1/2” 2000 PSI
3020-0014 1/4” 2000 PSI
3020-3023 3/4” 2000 PSI
2-Way Ball Valve3020-3032 1/4” 4000 PSI
3020-3031 1/2” 4000 PSI
3020-3017 3/4” 4000 PSI
3020-3035 1” 4000 PSI
3020-3015 1-1/4” 4000 PSI
PipeHunter Tools - Revision 3
2-Way Ball ValveZ-5252009 3/4” 2000 PSI
Toll Free: 800.373.1318
Fire Hydrant Accesories
Brass Hydrant Adapter3008-0505 2-1/2”x 3/4”
3008-0506 2-1/2”x 1”
3008-0507 2-1/2”x 1-1/2”
3008-0508 2-1/2”x 2”
3008-0509 3”x 2-1/2”
Fill Hoses3009-9001 2-1/2”x 25’ F x F
3009-9002 1-1/2”x 50’ M x F
3009-9003 1-1/2”x 100’ M x F
3009-9000 2-1/2”x 25’ M x Blank
25PipeHunter Tools - Revision 3
Aluminum Hose RackThe perfect size for 25’ of hydrant fill hose.
7700-7600-0118
Hydrant Wrench3007-8001
Manhole Hook3007-8000 18”
3008-0511 36”
Toll Free: 800.373.1318
Handgun Accesories
Winter Recirc. Adapter3004-1065
Handgun Shutoff Valve21290C Handgun Valve Only
0 deg. Rotating Tip22700 1/4” BSPP
3600 PSI Max, 0 deg. Rotating
Quick Disconnects3004-1064 1/2” Brass - Female
3004-1065 1/2” Brass - Male
26
800
PipeHunter Tools - Revision 3
Retractable Hand Gun Hose Reel *3004-8012 35’hose
* does not include QD or Handgun Hose with purchase
3000Handgun Kit with Hose
3023-5002 Handgun (no hose)
3009-2003 25’ of hose w- handgun
3009-2002 50’ of hose w- handgun
3009-2000 75’ of hose w- handgun
3009-2001 100’ of hose w- handgun
Toll Free: 800.373.1318
Lighting & Electrical
Work Light3018-2506
2-Wire Warning Light3018-2530
Clearance Light3018-2553 Amber Lens
3018-2552 Red Lens
3018-2551 Rubber Grommet
3018-2091 Wiring Pigtails
Clearance Light3018-2505A Amber
3018-2505R Red
3018-2505W Clear/White
Trailer Tail Light3018-3504
Panel Light3018-2517
License Plate Light3018-2503
Strobe Light3018-2541
Beacon Light3018-2540
27Toll Free: 800.373.1318 PipeHunter Tools - Revision 3
Lighting & Electrical
Directional Arrowstick3018-2525 Arrowstick
3018-2525 Controller Box
Clearance Light Strip3018-2564
28
2-Position Toggle2-Pole (light switch application)
3018-0059
2-Position Toggle4-Pole
3018-0095
3-Position Toggle6-Pole (electric throttle application)
3018-0096
Handheld Spotlight3018-2562
Murphy Switch3001-0219
Retractable Light Reel3018-2546 Light & Reel Assembly
Toll Free: 800.373.1318
Toll Free: 800.373.1318
Gauges
Tachometer3001-0215
Hour Meter3001-0249
Volt Meter3001-0213
Oil Pressure GaugeGauge 3001-0212
Sender 3001-0210
Water Temp. GaugeGauge 3001-0219
Sender 3004-6017
Vacuum Gauge3040-0002
PipeHunter Tools - Revision 3
Water Pressure Gauge3001-0269 Panel Mount
Water Pressure Gauge3001-0231 Bottom Fitting Mount
Hydraulic Temp Gauge3001-0252
29
Tool Boxes
30
36” Above Frame14” x 14” x 36”
7600-141436LB
36” Below Frame14” x 14” x 36”
3004-5047
T-Handle Latches3004-0208
Rubber Holdown Latch3004-3070
Door Support3004-3065
24” Below Frame14” x 14” x 24”
3004-5048
Tall Tool Box19” x 33” x 40”
7600-193340LB
48” Above Frame14” x 14” x 48”
7600-141448LB
Drawbar Mount52” x 26” x 15.5”
7600-152652DB-A
PipeHunter Tools - Revision 3 Toll Free: 800.373.1318
2-5/16” Ball Hitch3007-1900
2-5/16” Locking Hitch3007-1928
Pintle Style Hitch 3007-1927
Towing & Trailer
36” Screw Jackstand2,000# capacity, 15” of lift travel
3007-1901
30” Screw Jackstand2,000# capacity, 10” of lift travel
3007-1931
PipeHunter Tools - Revision 3
7-Pin Trailer Plug3018-5010
6-Pin Trailer Plug3018-5007
Breakaway Cable3018-0083
36” Dropleg Jackstand5,000# capacity
3007-1919A
Toll Free: 800.373.1318 31
Your Local
distributor is:
Sign up for our “Parts Specials Mailing List” online:http://tools.pipehunter.com/subscribe.html
Part #: PHTOOLS-CATALOG
Copyright 2009. The PipeHunter and PipeHunter Tools trademarks are property of PipeHunter, Inc. All other trademarks are property of their respective owners.
Terms & Conditions of SaleMinimum Order QuantityIn order for us to maintain the highest service possible we are requiring a minimum of $50 per sales order (before shipping).
Returns & ExchangesReturns are accepted within 14 days of receipt. Orders may be re-turned only if an Return Material Authorization number is issued prior to shipment. Orders returned without prior authorization will be returned to point of origin.
Warranty12 Month warranty for all “PipeHunter Parts”, any other warran-ties are responsibility of the original manufacturer and are not the burden of PipeHunter.
ShippingShipping will be completed by UPS unless otherwise requested by customer.
Contact InformationPipeHunter Parts Department
1617 Garden RoadPearland, TX 77581
1.800.373.1318 ext. 219
Our StorySmall Start, Big Dreams...
PipeHunter Tools and Equipment began as an eager equipment distributor in southern Texas in 1986. Today, over 28 companies across the United States, Canada and Mexico proudly represent PipeHunter.
Good Ideas
A few simple ideas led us to build the best jetter on the market back then and today:
1. Simplicity - We don’t think that jetting equipment operation should require any kind of special education.
2. Durability - If a component has a reputation of being fragile or not very reliable, then it is worth finding something better. We are constantly searching for the best components possible to make PipeHunter equipment last as long as possible.
3. Accessibility - You shouldn’t have to make 15 phone calls to find out where the best place to get replacement parts and service. We work very hard to find local dealers so experience and help is not far away.