Pipe Recovery Operations

OW

EN

OIL

TO

OL

S

OW

EN

OIL

TO

OL

S

Locat ions

From our g lobal network of Owen Oi l Tools fac i l i t ies , we prov ide per forat ing gun systems, p ipe recovery systems and aux i l ia ry equipment that can be conveyed into the wel l bore by any method ava i lab le to prov ide our customers wi th so lut ions for the i r wel l in tervent ion problems.

We do more than s imply prov ide a commodity. We prov ide a “Best in Class” product l ine and back the product wi th unr iva led technica l support and t ra in ing where requi red. We a lso endeavor to ass ist our c l ients wi th choosing the Owen Oi l Tools product that best f i ts the i r par t icu lar needs. Th is is a rar i ty in today’s “one s ize f i ts a l l ” marketp lace.

©2013, 2016 Owen Oi l Tools LP. A l l R ights Reserved. Owen Oi l Tools LP. is a subsid iary of Core Laborator ies, 12001 County Road 1000, Godley, TX 76044 TEL: 1 .800.333.6936 • www.corelab.com/owen

In ternat ional customers p lease be sure to add the USA country code (+1) when ca l l ing to the numbers l is ted above. Shipping is ava i lab le to most in ternat ional locat ions f rom our USA Headquarters .

are usual ly an unwanted necess i ty and can be d i ff icu l t wi th unforeseen problems at every turn. The Oi l f ie ld “F isherman” is tasked wi th t ry ing to recover the p ipe

quick ly and eff ic ient ly. Owen Oi l Tools prov ides the product of choice wi th downhole explos ive and aux i l ia ry equipment for P ipe Recovery.

LAST UPDATED 01/30/17

INTERNATIONAL Adela ide, Austra l ia . . . . . . . . . . . . . 61.8.8152.0244 Red Deer, AB . . . . . . . . . . . . . . . . . . . . . . (403) 340.1017 Calgary, AB . . . . . . . . . . . . . . . . . . . . . . . . (403) 571.2400 Grande Pra i r ie , AB . . . . . . . . . . . . . . (780) 539.0506 Edmonton, AB . . . . . . . . . . . . . . . . . . . . (780) 449.2021 Medic ine Hat , AB . . . . . . . . . . . . . . . . (403) 548.2888 L loydminster, AB . . . . . . . . . . . . . . . . . (780) 871.0670 Brooks, AB . . . . . . . . . . . . . . . (403) 362-2633 / 2531 Standard, AB . . . . . . . . . . . . . . . . . . . . . . (403) 644.3901 Fort St . John, BC . . . . . . . . . . . . . . . . (250) 785.7792 Estevan, SK . . . . . . . . . . . . . . . . . . . . . . . (306) 636.6936 Bei j ing, China . . . . . . . . . . . . . . . . . . 86.10.8458.0125 Cundinamarca, Colombia . . . . +57 1 823 3942 Dyce Aberdeen, Scot land . . 44.1224.421.077 Poza Rica, Mexico . . . . . . . . . (52) 782.823.5172 Reynosa, Mexico . . . . . . . . . (52) 1 .899.959.0787 Abu Dhabi , UAE . . . . . . . . . . . . . . . . . . 9712.551.0181 Ghala Muscat , UAE . . . . . . . . . . . . . . 96824.592460

UNITED STATES Bakersf ie ld , CA. . . . . . . . . . . . . . . . . . . . . 661.637.1380 Fru i ta , CO . . . . . . . . . . . . . . . . . . . . . . . . . . . . 970.858.1850 Boss ier Ci ty, LA . . . . . . . . . . . . . . . . . . . . 318.741.9036 Broussard, LA . . . . . . . . . . . . . . . . . . . . . . . 337.837.0021 Houma, LA . . . . . . . . . . . . . . . . . . . . . . . . . . . 985.868.7010 Scott , LA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337.984.1181 Wi l l ison, ND . . . . . . . . . . . . . . . . . . . . . . . . . 701.577.6936 Oklahoma Ci ty, OK . . . . . . . . . . . . . . . . 405.495.4441 Punxsutawney, PA . . . . . . . . . . . . . . . . . 724.286.9131 Victor ia , TX . . . . . . . . . . . . . . . . . . . . . . . . . . 361.576.6083 Odessa, TX . . . . . . . . . . . . . . . . . . . . . . . . . . 432.385.7484 Corpus Chr is t i , TX . . . . . . . . . . . . . . . . 361.289.2770 Snyder, TX . . . . . . . . . . . . . . . . . . . . . . . . . . . 325.573.9580 Parkersburg, WV . . . . . . . . . . . . . . . . . . . 304.464.4338 Casper, WY . . . . . . . . . . . . . . . . . . . . . . . . . 307-266-6936

Pipe

Rec

Bro

c.in

dd

110

/10/

17

11:0

1 AM

Not

es:

PE

RF

OR

AT

ING

SO

LU

TIO

NS

Owen

Oil

Tool

s P.O

. Box

568,

1200

1 Cou

nty R

oad 1

000,

Godle

y, Te

xas 7

6044

P.

800.3

33.69

36 -

www.

corel

ab.co

m/ow

en

PE

RF

OR

AT

ING

SO

LU

TIO

NS

Owen

Oil

Tool

s P.O

. Box

568,

1200

1 Cou

nty R

oad 1

000,

Godle

y, Te

xas 7

6044

P.

800.3

33.69

36 -

www.

corel

ab.co

m/ow

en

Pipe

Rec

Bro

c.in

dd

210

/10/

17

11:0

1 AM

Owen Oi l Tools prov ides a fu l l range of P ipe Recovery dev ices inc luding the Spl i t Shot™, NT-Ser ies Jet Cutters , and Dual-End Sever ing Tools . The Pipe Recovery dev ices offered by Owen Oi l Tools are des igned to maximize the per formance and min imize damage to tubulars making f ish ing at tempts eas ier.

ACE Tubing & Extended Range Cutters prov ide a quick and effect ive so lut ion to cut tub ing in the removal of s tuck p ipe. These cut ters ut i l i ze severa l technologica l improvements to a l low them to cut more re l iab ly wi th less f lare compared to prev ious tubing cut ters .

Tubing/Dri l l P ipe Cutters prov ide a quick and effect ive so lut ion to sever tubing in the removal of s tuck p ipe. Tubing Cutters should be used when tubing becomes stuck in the wel l . The cut ter wi th the largest poss ib le d iameter capable of running in the wel l should be chosen to achieve maximum per formance.

(NT) Segmented Casing Cutters prov ide a quick and effect ive so lut ions to cut cas ing. NT Segmented Casing Cutters should be used when cas ing becomes stuck in the wel l or dur ing p lug and abandonment operat ions. The cut ter wi th the largest poss ib le d iameter capable of running in the wel l should be chosen to achieve maximum per formance.

Dri l l Col lar Sever ing Tools are des igned to sever dr i l l co l lars and heavyweight dr i l l p ipe re l iab ly and safe ly dur ing Pipe Recovery Operat ions.

“When it matters most, rely on Owen Pipe Recovery Products to get the job done right”

Drill

Col

lar S

ever

ing To

ols u

tilize

EBW

s to s

imult

aneo

usly

deto

nate

an

explo

sive c

olumn

from

bot

h end

s. Th

e con

verg

ence

of th

e deto

nated

ex

plosiv

e colu

mns c

reates

a sh

ock w

ave c

ollisi

on, s

ever

ing th

e tub

ular.

Split

Sho

t® C

utte

r was

des

igned

for u

se w

here

tradit

ional

jet cu

tters

were

not e

ffecti

ve or

could

not b

e use

d. Th

e Spli

t Sho

t®

Cutte

r is r

un in

a lin

ear c

onfig

urati

on ad

jacen

t to a

ny co

llar o

r con

necti

on an

d po

sition

ed b

y inli

ne m

agne

ts. A

fter d

etona

tion

the c

ollar

or co

nnec

tion i

s spli

t allo

wing

the p

ipe to

be f

reed

for e

asy r

emov

al.

P E R F O R A T I N G S O L U T I O N S

OWEN OIL TOOLSO

WE

N O

IL T

OO

LS

SPLI

TSH

OT 3”

OD

)

18”

Asse

mbl

y24

” As

sem

bly

48”

Asse

mbl

yTe

mp

R

atin

g

(0 F)

Tool

O

.D.

(in)

*Pre

ssur

e R

atin

g

(psi

)

Expl

osiv

e W

eigh

t (g

r/ft)

U.N

. Sh

ippi

ng

Cla

ss

REC

OM

MEN

DED

USA

GE

RAN

GE

(in)

SSC

-200

0-31

1SS

C-2

000-

321

SSC

-200

0-34

132

52.

000

11,7

002,

000

1.4

5-1/

2 to

16

Tubi

ng/C

asin

g

SSC

-200

0-41

1SS

C-2

000-

421

SSC

-200

0-44

140

02.

000

11,7

002,

000

1.4S

5-1/

2 to

16

Tubi

ng/C

asin

g

SSC

-200

0-31

2SS

C-2

000-

322

SSC

-200

0-34

232

52.

000

11,7

001,

200

1.4S

3-1/

2 to

7 T

ubin

g/C

asin

g

SSC

-200

0-41

2SS

C-2

000-

422

SSC

-200

0-44

2 40

02.

000

11,7

001,

200

1.4S

3-1/

2 to

7 T

ubin

g/C

asin

g

SSC

-137

5-31

2SS

C-1

375-

322

SSC

-137

5-34

232

51.

375

14,0

00

900

1.4S

2-7/

8 to

4-1

/2 T

ubin

g/C

asin

g

SSC

-137

5-41

2SS

C-1

375-

422

SSC

-137

5-44

240

01.

375

14,0

00

900

1.4S

2-7/

8 to

4-1

/2 T

ubin

g/C

asin

g

SSC

-137

5-31

1SS

C-1

375-

321

-32

51.

375

14,0

00

600

1.4S

2-3/

8 to

2-7

/8 T

ubin

g/C

asin

g

SSC

-137

5-41

1SS

C-1

375-

421

-40

01.

375

14,0

00

600

1.4S

2-3/

8 to

2-7

/8 T

ubin

g /C

asin

g

SSC

-100

0-36

1-

-32

51.

000

11,0

0050

01.

4S1.

66 to

2-3

/8 T

ubin

g

SSC

-100

0-46

1-

-40

01.

000

11,0

0050

01.

4S1.

66 to

2-3

/8 T

ubin

g

SSC

-087

5-36

1-

-32

50.

875

10,0

0050

01.

4S1.

315

to 2

-3/8

Tub

ing

SSC

-087

5-46

1-

-40

00.

875

10,0

0050

01.

4S1.

315

to 2

-3/8

Tub

ing

*User

need

s t

o r

efe

r to

th

e c

ata

log

pag

e f

or

sp

ecifi

c p

ressu

re r

ati

ng

s d

ep

en

den

t u

po

n t

em

pera

ture

s a

t d

ep

th.

SEVE

RIN

G TO

OLS

Tool

Size (in)

Har

dwar

e K

it (P

art N

o.)

Det

onat

orN

umbe

r of

Det

onat

ors

Req

uire

d

Pelle

tN

umbe

r

Num

ber

of P

elle

tsR

equi

red

Pres

sure

Rat

ing

(psi

)

Expl

osiv

eW

eigh

t(g

)

U.N

. Sh

ippi

ngC

lass

REC

OM

MEN

DED

USA

GE

RAN

GE

(in)

1-3/

8SE

V-13

75-2

00EB

W-P

SCI-4

012

CRT

-303

0-40

0FV

2820

,000

567

1.4D

2-7/

8” -

3-1/

2” D

rill C

ol-

lar (

Up

to 4

-1/4

” O

D)

1-3/

4SE

V-17

50-2

00EB

W-P

SCI-4

012

CRT

-303

0-40

0GV

4420

,000

1056

1.4D

3-1/

2” -

5” D

rill C

olla

r (U

p to

6-1

/4”

OD

)

2SE

V-20

00-2

00EB

W-P

SCI-4

012

CRT

-303

0-40

0JV

6020

,000

1395

1.4D

4” -

6” D

rill C

olla

r (U

p to

8”

OD

)

2-3/

8SE

V-23

75-2

00EB

W-P

SCI-4

012

CRT

-303

0-40

0LV

8820

,000

1998

1.4D

7” -

11”

Dril

l Col

lar

(Up

to 1

3” O

D)

Pipe

Rec

Bro

c.in

dd

310

/10/

17

11:0

1 AM

Owen Oil Tools provides a full range of Pipe Recovery devices including the Split Shot™

, NT-Series Jet Cutters, and Dual-End Severing Tools. The Pipe Recovery devices offered by Owen Oil Tools are designed to maximize the performance and minimize damage to tubulars making fishing attempts easier.

ACE Tubing & Extended Range Cutters provide a quick and effective solution to cut tubing in the removal of stuck pipe. These cutters utilize several technological improvements to allow them to cut more reliably with less flare compared to previous tubing cutters.

Tubing/Drill Pipe Cutters provide a quick and effective solution to sever tubing in the removal of stuck pipe. Tubing Cutters should be used when tubing becomes stuck in the well. The cutter with the largest possible diameter capable of running in the well should be chosen to achieve maximum performance.

(NT) Segmented Casing Cutters provide a quick and effective solutions to cut casing. NT Segmented Casing Cutters should be used when casing becomes stuck in the well or during plug and abandonment operations. The cutter with the largest possible diameter capable of running in the well should be chosen to achieve maximum performance.

Drill Collar Severing Tools are designed to sever drill collars and heavyweight drill pipe reliably and safely during Pipe Recovery Operations. “W

hen it matters m

ost, rely on O

wen Pipe R

ecovery Products to get the job done right”

Dr i l l Col lar Sever ing Tools u t i l i ze EBWs to s imul taneously detonate an explos ive co lumn f rom both ends. The convergence of the detonated explos ive co lumns creates a shock wave col l is ion, sever ing the tubular.

Spl i t Shot® Cutter was des igned for use where t rad i t iona l je t cut ters were not e ffect ive or could not be used. The Spl i t Shot® Cutter is run in a l inear conf igurat ion adjacent to any col lar or connect ion and posi t ioned by in l ine magnets. Af ter detonat ion the co l lar or connect ion is sp l i t a l lowing the p ipe to be f reed for easy removal .

PE

RF

OR

AT

ING

SO

LU

TIO

NS

OW

EN

OIL

TO

OL

S

OWEN OIL TOOLS

SPLITSHOT 3” OD)

18” Assembly 24” Assembly 48” AssemblyTemp Rating

(0F)

Tool O.D. (in)

*Pressure Rating (psi)

Explosive Weight (gr/ft)

U.N. Shipping

Class

RECOMMENDED USAGE RANGE (in)

SSC-2000-311 SSC-2000-321 SSC-2000-341 325 2.000 11,700 2,000 1.4 5-1/2 to 16 Tubing/Casing

SSC-2000-411 SSC-2000-421 SSC-2000-441 400 2.000 11,700 2,000 1.4S 5-1/2 to 16 Tubing/Casing

SSC-2000-312 SSC-2000-322 SSC-2000-342 325 2.000 11,700 1,200 1.4S 3-1/2 to 7 Tubing/Casing

SSC-2000-412 SSC-2000-422 SSC-2000-442 400 2.000 11,700 1,200 1.4S 3-1/2 to 7 Tubing/Casing

SSC-1375-312 SSC-1375-322 SSC-1375-342 325 1.375 14,000 900 1.4S 2-7/8 to 4-1/2 Tubing/Casing

SSC-1375-412 SSC-1375-422 SSC-1375-442 400 1.375 14,000 900 1.4S 2-7/8 to 4-1/2 Tubing/Casing

SSC-1375-311 SSC-1375-321 - 325 1.375 14,000 600 1.4S 2-3/8 to 2-7/8 Tubing/Casing

SSC-1375-411 SSC-1375-421 - 400 1.375 14,000 600 1.4S 2-3/8 to 2-7/8 Tubing /Casing

SSC-1000-361 - - 325 1.000 11,000 500 1.4S 1.66 to 2-3/8 Tubing

SSC-1000-461 - - 400 1.000 11,000 500 1.4S 1.66 to 2-3/8 Tubing

SSC-0875-361 - - 325 0.875 10,000 500 1.4S 1.315 to 2-3/8 Tubing

SSC-0875-461 - - 400 0.875 10,000 500 1.4S 1.315 to 2-3/8 Tubing*User needs to refer to the catalog page for specific pressure ratings dependent upon temperatures at depth.

SEVERING TOOLSToolSize(in)

Hardware Kit (Part No.) Detonator

Number ofDetonatorsRequired

PelletNumber

Numberof PelletsRequired

PressureRating(psi)

ExplosiveWeight

(g)

U.N. Shipping

Class

RECOMMENDEDUSAGE RANGE

(in)

1-3/8 SEV-1375-200 EBW-PSCI-401 2 CRT-3030-400FV 28 20,000 567 1.4D 2-7/8” - 3-1/2” Drill Col-lar (Up to 4-1/4” OD)

1-3/4 SEV-1750-200 EBW-PSCI-401 2 CRT-3030-400GV 44 20,000 1056 1.4D 3-1/2” - 5” Drill Collar (Up to 6-1/4” OD)

2 SEV-2000-200 EBW-PSCI-401 2 CRT-3030-400JV 60 20,000 1395 1.4D 4” - 6” Drill Collar (Up to 8” OD)

2-3/8 SEV-2375-200 EBW-PSCI-401 2 CRT-3030-400LV 88 20,000 1998 1.4D 7” - 11” Drill Collar (Up to 13” OD)

PipeRec Broc.indd 3 10/10/17 11:01 AM

Pipe Recovery Operations LAST UPDATED 01/30/17

Notes:

P E R F O R A T I N G S O L U T I O N S

OW

EN

OIL

TO

OL

S

ACE TUBING CUTTERS™Pipe

NominalO.D. (in)

Part NumberTemp.Rating

(°F)

CutterO.D.(in)

PressureRating(psi)

ExplosiveWeight

(g)

U.N.Shipping

Class

RECOMMENDED USAGE RANGETubing

O.D.(in)

I.D.(in)

Weight(lb/ft)

2-3/8 CUT-1687-409 400 1.687 15,000 11.1 1.4D 2.375 1.995 - 1.867 4.7# - 5.95#

2-7/8 CUT-2062-409 400 2.062 15,000 18.4 1.4D 2.875 2.441 - 2.259 6.5# - 8.7#

3-1/2 CUT-2500-409 400 2.500 15,000 30.5 1.4D 3.500 2.750 - 2.992 9.3# - 12.95#

EXTENDED RANGE ACE TUBING CUTTERS™Pipe

NominalO.D. (in)

Part NumberTemp.Rating

(°F)

CutterO.D.(in)

PressureRating(psi)

ExplosiveWeight

(g)

U.N.Shipping

Class

RECOMMENDED USAGE RANGETubing

O.D.(in)

I.D.(in)

Weight(lb/ft)

2-7/8 CUT-1687-429 400 1.687 5,000 19 1.4D 2.875 2.441 - 2.259 6.5# - 8.7#

2-7/8 CUT-1875-419 400 1.875 15,000 14.75 1.4D 2.875 2.441 - 2.259 6.5# - 8.7#

3-1/2 CUT-2188-419 400 2.188 15,000 29.0 1.4D 3.500 2.750 - 2.992 9.3# - 12.95#

TUBING CUTTERSPipe

NominalO.D. (in)

Part NumberTemp.Rating

(°F)

CutterO.D.(in)

PressureRating(psi)

ExplosiveWeight

(g)

U.N.Shipping

Class

RECOMMENDED USAGE RANGETubing

O.D.(in)

I.D.(in)

Weight(lb/ft)

1-1/4 CUT-1230-402 400 1.230 12,000 14.0 1.4D 1.660 1.380 2.40#

1-1/2 CUT-1390-402 400 1.390 15,000 18.0 1.4D 1.900 1.610 2.90#

2-1/16 CUT-1560-402 400 1.560 15,000 11.0 1.4D 2.063 1.751 3.25#

NT TUBING/DRILL PIPE CUTTERSPipe

NominalO.D. (in)

Part NumberTemp.Rating

(°F)

CutterO.D.(in)

PressureRating(psi)

ExplosiveWeight

(g)

U.N.Shipping

Class

RECOMMENDED USAGE RANGETubing

O.D.(in)

I.D.(in)

Weight(lb/ft)

3-1/2 Drill Pipe CUT-2500-402NT 400 2.500 15,000 54.0 1.4S 3.500 2.602-2.764 13.30# -15.50#

4 Drill Pipe CUT-3000-062NT 400 3.00 12,000 54.0 1.4S 4.000 3.240-3.340 14# - 15.7#

NT SEGMENTED CASING CUTTERSRecommended

PipeSizes (in)

Part NumberTemp.Rating

(°F)

CutterO.D.(in)

PressureRating(psi)

ExplosiveWeight

(g)

U.N.Shipping

Class

RECOMMENDED USAGE RANGE (in)

O.D.(in)

I.D.(in)

Weight(lb/ft)

4-1/2 DRILL PIPE CUT-3437-062NT 400 3.437 12,000 82.3 1.4S 4.5 3.64 - 3.826 16.6 - 20

4-1/2 CASING CUT-3562-062NT 400 3.562 12,000 82.3 1.4S 4.5 3.92 - 4.45 9.5 - 13.5

4-1/2 CASING CUT-3625-062NT 400 3.625 12,000 82.3 1.4S 4.5 3.92 - 4.45 9.5 - 13.5

5 CASING CUT-3812-062NT 400 3.812 12,000 82.3 1.4S 5 4.044 23.2

5-1/2 CASING CUT-4500-062NT 400 4.5 12,000 125 1.4S 5.5 4.67 - 4.892 17 - 23

5-1/2 CASING CUT-4750-062NT 400 4.75 12,000 125 1.4S 5.5 4.95 - 5.05 13 - 15.5

6-5/8 CASING CUT-5500-062NT 400 5.5 12,000 318 1.4S 6.625 5.675 - 5.791 28 - 32

6-5/8 CASING CUT-5750-062NT 400 5.75 12,000 318 1.4S 6.625 5.921 - 6.55 17 - 24

6-5/8 DRILL PIPE CUT-5750-062NT 400 5.75 12,000 318 1.4S 6.625 5.96 25

7 CASING CUT-5500-062NT 400 5.5 12,000 318 1.4S 7 5.82 41

7 CASING CUT-5750-062NT 400 5.75 12,000 318 1.4S 7 5.92 - 6.538 17 - 38

7-5/8 CASING CUT-6375-062NT 400 6.375 12,000 318 1.4S 7.625 6.625 - 7.12 20 - 39

SEGMENTED CASING CUTTERSRecommended

PipeSizes (in)

Part NumberTemp.Rating

(°F)

CutterO.D.(in)

PressureRating(psi)

ExplosiveWeight

(g)

U.N.Shipping

Class

RECOMMENDED USAGE RANGE (in)

O.D.(in)

I.D.(in)

Weight(lb/ft)

8-5/8 CUT-7250-031 325 7.25 9,000 334 1.4S 8.625 7.511 - 8.097 24 - 49

8-5/8 CUT-7250-032 400 7.25 9,000 334 1.4S 8.625 7.511 - 8.097 24 - 49

9-5/8 CUT-8250-031 325 8.25 10,000 402 1.4S 9.625 8.535 - 9.001 32.3 - 53.5

9-5/8 CUT-8250-032 400 8.25 10,000 402 1.4S 9.625 8.535 - 9.001 32.3 - 53.5

11-3/4 CUT-9500-031 325 9.5 10,000 468 1.4S 11.75 10.772 - 11.084 42 - 60

11-3/4 CUT-9500-032 400 9.5 10,000 468 1.4S 11.75 10.772 - 11.084 42 - 60

13-3/8 CUT-1200-031 325 12 4,000 650 1.4S 13.375 7.525 - 7.965 48 - 77

13-3/8 CUT-1200-032 400 12 4,000 650 1.4S 13.375 7.525 - 7.965 48 - 77

PipeRec Broc.indd 4 10/10/17 11:01 AM

Notes:

P E R F O R A T I N G S O L U T I O N S

Owen Oi l Tools P.O. Box 568, 12001 County Road 1000, Godley, Texas 76044 P. 800.333.6936 - www.corelab.com/owen

P E R F O R A T I N G S O L U T I O N S

Owen Oi l Tools P.O. Box 568, 12001 County Road 1000, Godley, Texas 76044 P. 800.333.6936 - www.corelab.com/owen

PipeRec Broc.indd 2 10/10/17 11:01 AM

Pipe Recovery Operations

OW

EN

OIL

TO

OL

S

OW

EN

OIL

TO

OL

S

Locat ions

From our g lobal network of Owen Oi l Tools fac i l i t ies , we prov ide per forat ing gun systems, p ipe recovery systems and aux i l ia ry equipment that can be conveyed into the wel l bore by any method ava i lab le to prov ide our customers wi th so lut ions for the i r wel l in tervent ion problems.

We do more than s imply prov ide a commodity. We prov ide a “Best in Class” product l ine and back the product wi th unr iva led technica l support and t ra in ing where requi red. We a lso endeavor to ass ist our c l ients wi th choosing the Owen Oi l Tools product that best f i ts the i r par t icu lar needs. Th is is a rar i ty in today’s “one s ize f i ts a l l ” marketp lace.

©2013, 2016 Owen Oi l Tools LP. A l l R ights Reserved. Owen Oi l Tools LP. is a subsid iary of Core Laborator ies, 12001 County Road 1000, Godley, TX 76044 TEL: 1 .800.333.6936 • www.corelab.com/owen

In ternat ional customers p lease be sure to add the USA country code (+1) when ca l l ing to the numbers l is ted above. Shipping is ava i lab le to most in ternat ional locat ions f rom our USA Headquarters .

are usual ly an unwanted necess i ty and can be d i ff icu l t wi th unforeseen problems at every turn. The Oi l f ie ld “F isherman” is tasked wi th t ry ing to recover the p ipe

quick ly and eff ic ient ly. Owen Oi l Tools prov ides the product of choice wi th downhole explos ive and aux i l ia ry equipment for P ipe Recovery.

LAST UPDATED 01/30/17

INTERNATIONAL Adela ide, Austra l ia . . . . . . . . . . . . . 61.8.8152.0244 Red Deer, AB . . . . . . . . . . . . . . . . . . . . . . (403) 340.1017 Calgary, AB . . . . . . . . . . . . . . . . . . . . . . . . (403) 571.2400 Grande Pra i r ie , AB . . . . . . . . . . . . . . (780) 539.0506 Edmonton, AB . . . . . . . . . . . . . . . . . . . . (780) 449.2021 Medic ine Hat , AB . . . . . . . . . . . . . . . . (403) 548.2888 L loydminster, AB . . . . . . . . . . . . . . . . . (780) 871.0670 Brooks, AB . . . . . . . . . . . . . . . (403) 362-2633 / 2531 Standard, AB . . . . . . . . . . . . . . . . . . . . . . (403) 644.3901 Fort St . John, BC . . . . . . . . . . . . . . . . (250) 785.7792 Estevan, SK . . . . . . . . . . . . . . . . . . . . . . . (306) 636.6936 Bei j ing, China . . . . . . . . . . . . . . . . . . 86.10.8458.0125 Cundinamarca, Colombia . . . . +57 1 823 3942 Dyce Aberdeen, Scot land . . 44.1224.421.077 Poza Rica, Mexico . . . . . . . . . (52) 782.823.5172 Reynosa, Mexico . . . . . . . . . (52) 1 .899.959.0787 Abu Dhabi , UAE . . . . . . . . . . . . . . . . . . 9712.551.0181 Ghala Muscat , UAE . . . . . . . . . . . . . . 96824.592460

UNITED STATES Bakersf ie ld , CA. . . . . . . . . . . . . . . . . . . . . 661.637.1380 Fru i ta , CO . . . . . . . . . . . . . . . . . . . . . . . . . . . . 970.858.1850 Boss ier Ci ty, LA . . . . . . . . . . . . . . . . . . . . 318.741.9036 Broussard, LA . . . . . . . . . . . . . . . . . . . . . . . 337.837.0021 Houma, LA . . . . . . . . . . . . . . . . . . . . . . . . . . . 985.868.7010 Scott , LA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337.984.1181 Wi l l ison, ND . . . . . . . . . . . . . . . . . . . . . . . . . 701.577.6936 Oklahoma Ci ty, OK . . . . . . . . . . . . . . . . 405.495.4441 Punxsutawney, PA . . . . . . . . . . . . . . . . . 724.286.9131 Victor ia , TX . . . . . . . . . . . . . . . . . . . . . . . . . . 361.576.6083 Odessa, TX . . . . . . . . . . . . . . . . . . . . . . . . . . 432.385.7484 Corpus Chr is t i , TX . . . . . . . . . . . . . . . . 361.289.2770 Snyder, TX . . . . . . . . . . . . . . . . . . . . . . . . . . . 325.573.9580 Parkersburg, WV . . . . . . . . . . . . . . . . . . . 304.464.4338 Casper, WY . . . . . . . . . . . . . . . . . . . . . . . . . 307-266-6936

Pipe

Rec

Bro

c.in

dd

110

/10/

17

11:0

1 AM