Pipe Hangers - R H Keleher Company
Transcript of Pipe Hangers - R H Keleher Company
Pipe Hangers
Pipe hangers presented in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the pipingsystem.Materials: Carbon Steel, Malleable Iron, 304 and 316 Stainless Steel are used in themanufacturing of riser and pipe clamps. Other materials are also available.Finishes: Finishes for pipe supports in this section are Plain Steel, Electro-PlatedZinc, Hot Dipped Galvanized, Red Primer, Plastic Coating, Copper Plated, StainlessSteel and other special coatings are also available.Notes: Products in this section are designed and manufactured in accordance withindustry standards. RHK is not responsible for injuries and damage which could re-sult from improper and negligent installation of the items.
131
Standard Clevis Hanger - K3100
Part NumberNominalPipe Size
Rod Size"A" "B" "C"
Rod TakeOut "D" "E"
Adjustment"F"
DesignLoad(Lbs.)
Wt./C(Lbs.)
K3100 - 1/2 1/2" 3/8" - 16 2 1/8" 1 11/16" 15/16" 2 1/2" 7/16" 730 25
K3100 - 3/4 3/4" 3/8" - 16 2 7/16" 1 7/8" 1 1/8" 2 1/2" 1/2" 730 29
K3100 - 1 1" 3/8" - 16 2 13/16" 2 1/8" 1 3/8" 2 1/2" 5/8" 730 35
K3100 - 1 1/4 1 1/4" 3/8" - 16 3 7/16" 2 9/16" 1 13/16" 2 1/2" 7/8" 730 40
K3100 - 1 1/2 1 1/2" 3/8" - 16 4" 3" 2 1/4" 2 1/2" 1 3/16" 730 42
K3100 - 2 2" 3/8" - 16 4 1/2" 3 1/4" 2 1/2" 2 1/2" 1 5/8" 730 52
K3100 - 2 1/2 2 1/2" 1/2" - 13 5 9/16" 4" 3 1/16" 2 1/2" 2" 1350 90
K3100 - 3 3" 1/2" - 13 6 3/4" 4 7/8" 3 15/16" 2 1/2" 2" 1350 110
K3100 - 3 1/2 3 1/2" 1/2" - 13 7" 5" 4 1/16" 2 1/2" 2" 1350 142
K3100 - 4 4" 5/8" - 11 7 13/16" 5 1/2" 4 3/8" 2 1/2" 2" 1430 132
K3100 - 5 5" 5/8" - 11 9 1/16" 6 1/8" 5" 2 1/2" 2" 1430 215
K3100 - 6 6" 3/4" - 10 10 7/16" 6 15/16" 5 11/16" 3" 2" 1940 320
K3100 - 8 8" 3/4" - 10 12 3/4" 8 3/8" 7 1/8" 3 1/2" 2 5/16" 2000 485
K3100 - 10 10" 7/8" - 9 15 1/4" 9 13/16" 8 3/8" 3 1/2" 2 5/16" 3600 846
K3100 - 12 12" 7/8" - 9 17 5/8" 11 3/16" 9 11/16" 3 1/2" 2 5/8" 3800 1083
K3100 - 14 14" 1" - 8 19 9/16" 12 1/2" 10 5/8" 4" 2 7/8" 4200 1432
K3100 - 16 16" 1" - 8 21 7/16" 13 5/16" 11 9/16" 4" 2 11/16" 4600 2200
K3100 - 18 18" 1" - 8 25" 15 7/8" 14 3/16" 4 1/2" 3 15/16" 4800 2500
K3100 - 20 20" 1 1/4" - 7 27 1/2" 17 3/8" 16 5/8" 5" 5 3/8" 4800 4400
K3100 - 24 24" 1 1/4" - 7 31 3/4" 19 5/8" 18 5/8" 5" 5 3/8" 4800 5000
K3100 - 30 30" 1 1/4" - 7 38 7/8" 23 3/4" 22 3/4" 5" 6 1/4" 6000 6600
K3100 - 36 36" 1 1/4" - 7 46" 27 13/16" 25" 5" 5 7/16" 6000 8474
Material: SteelStandard Finish: Plain, Electro-Plated, Hot-Dip Galvanized orStainless SteelService: Designed for suspendingnon-insulated stationary pipe al-lowing for vertical adjustmentOrdering: Specify part number andfinish
Notes: When using oversized clevis hangers, install K3100PS (Pipe Sleeve) over cross boltto prevent deformation of clevis bottom. When attaching seismic bracing to clevis hang-ers, a K3100PS (Pipe Sleeve) must be installed over the cross bolt
K3100PVC - Plastic Coated
132
Clevis Hanger Copper - K3100CU
Part NumberNominal
Tubing SizeRod Size
"A" "B" "C"Rod Take-Out "D" "E"
Adjustment"F"
DesignLoad(Lbs.)
Wt./C(Lbs.)
K3100CU - 1/2 1/2" 3/8" - 16 2 1/4" 1 15/16" 1 1/8" 2 1/2" 3/8" 150 12
K3100CU - 3/4 3/4" 3/8" - 16 1 15/16" 1 1/2" 1 1/8" 2 1/2" 7/16" 250 12
K3100CU - 1 1" 3/8" - 16 2 5/16" 1 3/4" 1 5/16" 2 1/2" 9/16" 250 22
K3100CU - 1 1/4 1 1/4" 3/8" - 16 2 3/4" 2 1/16" 1 9/16" 2 1/2" 9/16" 250 24
K3100CU - 1 1/2 1 1/2" 3/8" - 16 3 5/16" 2 7/16" 2 1/16" 2 1/2" 15/16" 250 30
K3100CU - 2 2" 3/8" - 16 4 1/2" 3 7/16" 3 3/8" 2 1/2" 1 3/4" 250 35
K3100CU - 2 1/2 2 1/2" 1/2" - 13 5 11/16" 4 1/2" 3 15/16" 2 1/2" 2 1/8" 350 80
K3100CU - 3 3" 1/2" - 13 5 3/16" 3 5/8" 4" 2 1/2" 2 1/16" 350 88
K3100CU - 3 1/2 3 1/2" 1/2" - 13 6 1/2" 4 9/16" 4 1/8" 2 1/2" 2 1/8" 350 94
K3100CU - 4 4" 1/2" - 13 7 3/8" 3 5/16" 4 3/8" 2 1/2" 2 1/8" 400 116
K3100CU - 5 5" 1/2" - 13 9" 6 7/16" 5 3/4" 2 1/2" 2 1/2" 550 208
K3100CU - 6 6" 5/8" - 11 10 5/16" 7 1/4" 6 1/2" 2 1/2" 3" 550 247
Material: SteelStandard Finish: CopperService: Designed for suspending cop-per tubing allowing for vertical adjust-ment. (Available with plastic coasting toprovide additional separation betweentubing and hanger)Ordering: Specify part number and fin-ish
K3100CUPVC - Plastic Coated
133
Clevis Hanger for AWWA Ductile Iron Pipe - K3102
PartNumber
NominalPipe Size
Rod Size"A" "B" "C"
Rod Take-Out"D" "E"
Adjustment"F"
DesignLoad(Lbs.)
Wt./C(Lbs.)
K3102 - 4 4" 5/8" - 11 8 5/16" 5 13/16" 4 5/8" 2 1/2" 2" 1430 203
K3102 - 6 6" 3/4" - 10 10 5/8" 7 1/16" 5 13/16" 3" 2" 1940 352
K3102 - 8 8" 3/4" - 10 13 1/4" 8 5/8" 7 3/16" 3 1/2" 2 1/8" 2000 532
K3102 - 10 10" 7/8" - 9 15 7/8" 10 1/4" 8 11/16" 3 1/2" 2 1/4" 3600 800
K3102 - 12 12" 7/8" - 9 18" 11 5/16" 9 3/4" 3 1/2" 2 1/4" 3800 1152
K3102 - 14 14" 1" - 8 20 3/8" 12 5/8" 11 3/16 4" 2 7/8" 4200 1449
K3102 - 16 16" 1" - 8 23 1/2" 14 11/16" 12 7/8" 4" 3 3/8" 4600 2100
K3102 - 18 18" 1" - 8 25 5/8" 15 3/4" 13 15/16" 4 1/2" 3 3/8" 4800 2294
K3102 - 20 20" 1 1/4" - 7 29 1/2" 18 9/16" 17 7/16" 5" 4 13/16" 4800 3887
K3102 - 24 24" 1 1/4" - 7 33" 19 1/8" 20" 5" 5 1/4" 4800 4844
Material: Steel (Stainless Steel available)Standard Finish: Plain or Electro-Plated
Service: Designed for suspending stationary duc-tile iron and cast iron pipe allowing for verticaladjustmentOrdering: Specify part number and finish
Note: For pipe sizes 12” and larger, cross bolt sleeve is included
134
V Bottom Clevis Hanger - K3106
Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for suspending flexibleplastic pipe. Use with K3106V Plastic PipeSupport ChannelOrdering: Specify part number and finish
Part Number Nominal Pipe SizeRod Size
"A" "B" "C" "E"Design
Load (Lbs.)Wt./C(Lbs.)
K3106 - 1
1/2"
3/8" - 16 5 7/8"
5 3/16"
2 9/16" 150 30
3/4" 5"
1" 4 7/8"
1 1/4" 4 5/8"
1 1/2" 4 7/16"
2" 4 1/8"
K3106 - 2
2 1/2"
1/2" - 13 8 15/16"
6 13/16"
4 11/16" 250 963" 6 3/8"
4" 5 11/16"
135
Pipe Support Channel - K3106V
Material: SteelStandard Finish: Pre-GalvanizedService: Designed as a continuous support forplastic or other flexible pipe systems. Use withK3106 V Bottom Clevis Hanger. Hangers shouldbe located as close as possible to the channeljointsOrdering: Specify part number and finish
Part Number For Nominal Pipe Size "B" Design Load (Lbs.) Wt./C (Lbs.)
K3106V - 1 1/2" to 2" 1 1/2" 150 540
K3106V - 2 2 1/2" to 4" 3" 250 1080
136
Extended Clevis Hanger - K3108
Part NumberNominalPipe Size
Rod Size"A" "B" "C"
Rod TakeOut "D" "E"
Adjustment"F" "H"
DesignLoad(Lbs.)
Wt./C(Lbs.)
K3108 - 3/4 3/4" 3/8" - 16 4 3/8" 3 13/16" 3 1/16" 2 1/2" 1/2" 2" 730 45
K3108 - 1 1" 3/8" - 16 4 3/4" 4 1/16" 3 1/4" 2 1/2" 5/8" 2" 730 49
K3108 - 1 1/4 1 1/4" 3/8" - 16 5 3/8" 4 1/2" 3 5/16" 2 1/2" 7/8" 2" 730 55
K3108 - 1 1/2 1 1/2" 3/8" - 16 6 7/8" 5 15/16" 5 1/8" 2 1/2" 1 3/16" 2" 730 67
K3108 - 2 2" 3/8" - 16 8 13/16" 7 5/8" 6 7/8" 2 1/2" 1 5/8" 4" 730 83
K3108 - 2 1/2 2 1/2" 1/2" - 13 10" 8 1/2" 7 9/16" 2 1/2" 2" 4" 1350 177
K3108 - 3 3" 1/2" - 13 10 5/8" 8 13/16" 7 7/8" 2 1/2" 2" 4" 1350 191
K3108 - 4 4" 5/8" - 11 11 13/16" 9 1/2" 8 3/8" 2 1/2" 2" 4" 1430 237
K3108 - 5 5" 5/8" - 11 13 1/8" 10 5/16" 9 1/8" 2 1/2" 2" 4" 1430 302
K3108 - 6 6" 3/4" - 10 14 3/8" 11" 9 11/16" 3" 2" 4" 1940 397
K3108 - 8 8" 3/4" - 10 16 3/4" 12 3/8" 11 1/8" 3 1/2" 2 5/16" 4" 2000 582
K3108 - 10 10" 7/8" - 9 19 1/4" 13 13/16" 12 5/16" 3 1/2" 2 5/16" 4" 3600 968
K3108 - 12 12" 7/8" - 9 21 5/8" 15 3/16" 13 5/8" 3 1/2" 2 5/8" 4" 3800 1221
Material: Steel (Stainless Steel available)Standard Finish: Plain or Electro-PlatedService: Designed for suspending insulatedpipe allowing for vertical adjustmentOrdering: Specify part number and finish.For Service temperature of 750°F thru1050°F specify Stainless Steel
Note: Hangers are sized to nominal pipe size - allowance must be made forinsulation thickness
137
Flat Top Clevis Hanger - K3109
Part NumberNominalPipe Size
Rod Size"A" "B" "C"
Rod Take-Out"D"
Design Load(Lbs.)
Wt./C(Lbs.)
K3109 - 2 2" 3/8" - 16 3 13/16" 2 5/8" 1 7/8" 300 52
K3109 - 2 1/2 2 1/2" 1/2" - 13 4 5/8" 3 3/16" 2 3/16" 500 116
K3109 - 3 3" 1/2" - 13 5 5/16" 3 9/16" 2 5/8" 500 133
K3109 - 3 1/2 3 1/2" 1/2" - 13 5 13/16" 3 13/16" 2 7/8" 500 145
K3109 - 4 4" 5/8" - 11 6 1/2" 4 1/4" 3 1/8" 700 180
K3109 - 5 5" 5/8" - 11 7 13/16" 5" 3 7/8" 700 248
K3109 - 6 6" 3/4" - 10 9 7/16" 5 11/16" 4 7/16" 900 332
K3109 - 8 8" 3/4" - 10 11 3/8" 7" 5 13/16" 1000 513
Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for suspending non-insulated, stationary pipe where spaceis limitedOrdering: Specify part number and size
138
Adjustable Swivel Ring - K3170
Part NumberNominal Pipe
Size Rod Size "A" "B" "C" "D"Design Load
(Lbs.)Wt./C(Lbs.)
K3170 - 1/2 1/2" 3/8" - 16 2 7/16" 1 3/16" 1 1/4" 180 11
K3170 - 3/4 3/4" 3/8" - 16 2 1/2" 1 1/4" 1 1/4" 180 12
K3170 - 1 1" 3/8" - 16 2 5/8" 1 3/8" 1 1/4" 180 13
K3170 - 1 1/4 1 1/4" 3/8" - 16 2 7/8" 1 5/8" 1 1/4" 180 14
K3170 - 1 1/2 1 1/2" 3/8" - 16 3" 1 3/4" 1 1/4" 180 14
K3170 - 2 2" 3/8" - 16 3 7/16" 2 3/16" 1 1/2" 180 16
K3170 - 2 1/2 2 1/2" 3/8" - 16 3 7/8" 2 5/8" 1 11/16" 200 25
K3170 - 3 3" 3/8" - 16 4 1/4" 3" 1 3/4" 250 29
K3170 - 3 1/2 3 1/2" 3/8" - 16 4 5/8" 3 3/8" 1 7/8" 300 33
K3170 - 4 4" 3/8" - 16 5" 3 3/4" 2" 360 40
K3170 - 5 5" 1/2" - 13 5 9/16" 4 1/16" 1 3/4" 480 83
K3170 - 6 6" 1/2" - 13 6 7/16" 4 15/16" 2 3/16" 630 91
K3170 - 8 8" 1/2" - 13 7 11/16" 6 3/16" 2 7/16" 970 130
Material: SteelStandard Finish: Pre-GalvanizedService: Designed for suspending insu-lated pipe (with shield) or non-insulatedpipe allowing for vertical adjustmentOrdering: Specify part number and finish
Notes: Knurled nut available as K3170KN-(rod size). Specify theK3170 part number it will be used in when ordering
139
Adjustable Swivel Ring Copper - K3170CU
Part NumberNominal
Tubing Size Rod Size "A" "B" "C" "D"Design Load
(Lbs.) Wt./C (Lbs.)
K3170CT - 1/2 1/2" 3/8" - 16 2 1/16" 1 1/8" 31/32" 180 8
K3170CT - 3/4 3/4" 3/8" - 16 2 5/16" 1 5/16" 1 1/32" 180 10
K3170CT - 1 1" 3/8" - 16 2 1/2" 1 9/16" 1 5/32" 180 10
K3170CT - 1 1/4 1 1/4" 3/8" - 16 2 1/2" 1 9/16" 1" 180 12
K3170CT - 1 1/2 1 1/2" 3/8" - 16 2 15/16" 2" 1 5/16" 180 12
K3170CT - 2 2" 3/8" - 16 3 1/8" 2 1/8" 1 3/16" 180 12
K3170CT - 2 1/2 2 1/2" 1/2" - 13 4 1/16" 2 9/16" 1 3/8" 200 31
K3170CT - 3 3" 1/2" - 13 3 15/16" 3 3/4" 1 1/4" 250 33
K3170CT - 3 1/2 3 1/2" 1/2" - 13 4 7/16" 3 1/4" 1 1/2" 300 38
K3170CT - 4 4" 1/2" - 13 4 11/16" 3 9/16" 1 9/16" 360 40
K3170CT - 5 5" 1/2" - 13 5 15/16" 4 5/16" 1 25/32" 480 95
K3170CT - 6 6" 1/2" - 13 6 11/16" 5 3/16" 2 1/8" 630 118
Material: SteelStandard Finish: CopperService: Designed for suspending copper tubing, allowing for vertical adjustment (availablewith plastic coasting to provide additional separation between tubing and hanger)Ordering: Specify part number, rod size and finish
K3170CUPVC - Plastic Coated
140
Adjustable Band Hanger - K3172
Part NumberNominalPipe Size
Rod Size"A" "B" "C" "D" "E" "F"
DesignLoad(Lbs.)
Wt./C(Lbs.)
K3172 - 1/2 1/2" 3/8" - 16 2 5/8" 2 3/16" 1 7/16" 1 1/4" 2 1/2" 610 11
K3172 - 3/4 3/4" 3/8" - 16 2 5/8" 2 1/16" 1 5/16" 1" 2 1/2" 610 12
K3172 - 1 1" 3/8" - 16 2 11/16" 2 1/16" 1 5/16" 11/16" 2 1/2" 610 12
K3172 - 1 1/4 1 1/4" 3/8" - 16 3 7/16" 2 9/16" 1 13/16" 1 1/4" 2 1/2" 610 14
K3172 - 1 1/2 1 1/2" 3/8" - 16 3 11/16" 2 3/4" 2" 1 3/16" 2 1/2" 610 16
K3172 - 2 2" 3/8" - 16 4 3/16" 3" 2 1/4" 1 3/16" 2 1/2" 610 23
K3172 - 2 1/2 2 1/2" 1/2" - 13 4 7/8" 3 7/16" 2 7/16" 1 1/4" 3 1/2" 970 28
K3172 - 3 3" 1/2" - 13 6" 4 1/4" 3 1/4" 1 5/8" 3 1/2" 970 41
K3172 - 3 1/2 3 1/2" 1/2" - 13 6 1/8" 4 1/8" 3 1/8" 1 3/8" 3 1/2" 970 44
K3172 - 4 4" 1/2" - 13 6 3/4" 4 1/2" 3 1/4" 1 3/8" 3 1/2" 1250 81
K3172 - 5 5" 1/2" - 13 7 3/4" 5" 4 3/4" 1 1/4" 4" 1250 100
K3172 - 6 6" 3/4" - 10 10" 6 11/16" 5 3/16" 2 1/8" 4 1/2" 1600 160
K3172 - 8 8" 3/4" - 10 11 7/8" 7 9/16" 6 13/16" 2" 4 1/2" 1800 260
Material: Steel (Stainless Steel available)Standard Finish: Plain or Pre-GalvanizedService: Designed for suspending non-insulatedpipe allowing for vertical adjustment.Ordering: Specify part number and finish
K3172PVC - Plastic Coated
Note: Available with plastic coating as K3172PVC-size
141
Adjustable Band Hanger Copper - K3172CU
Material: SteelStandard Finish: CopperService: Designed for suspend-ing copper tubing allowing forvertical adjustment. (Availablewith plastic coating to provideadditional separation betweentubing and hanger)Ordering: Specify part numberand finish
K3172CUPVC - Plastic Coated
Part Number
NominalTubing
SizeRod Size
"A" "B" "C" "D" "E" "F"
DesignLoad(Lbs.)
Wt./C(Lbs.)
K3172CU - 1/2 1/2" 3/8" - 16 9/16" 2 1/4" 1 1/2" 1 7/16" 2 1/2" 610 12
K3172CU - 3/4 3/4" 3/8" - 16 2 9/16" 2 1/8" 1 3/8" 1 3/16" 2 1/2" 610 12
K3172CU - 1 1" 3/8" - 16 2 9/16" 2" 1 1/4" 15/16" 2 1/2" 610 12
K3172CU - 1 1/4 1 1/4" 3/8" - 16 2 3/4" 2 1/16" 1 5/16" 7/8" 2 1/2" 610 12
K3172CU - 1 1/2 1 1/2" 3/8" - 16 3 1/8" 2 5/16" 1 9/16" 1" 2 1/2" 610 13
K3172CU - 2 2" 3/8" - 16 3 11/16" 2 5/8" 1 7/8" 1 1/16" 2 1/2" 610 16
K3172CU - 2 1/2 2 1/2" 1/2" - 13 4 1/2" 3 3/16" 2 5/16" 1 1/4" 2 1/2" 970 30
K3172CU - 3 3" 1/2" - 13 5" 3 7/16" 2 1/2" 1 3/16" 2 1/2" 970 32
K3172CU - 3 1/2 3 1/2" 1/2" - 13 5 3/4" 3 15/16" 3" 1 7/16" 2 1/2" 970 40
K3172CU - 4 4" 1/2" - 13 6 1/4" 4 3/16" 3 1/4" 1 7/16" 2 1/2" 970 49
142
Offset J-Hook - K3190
Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for supporting light pipe runswith a 1” offset from mounting surfacesOrdering: Specify part number and finish
Part Number Nominal Pipe Size "A" "B" Design Load (Lbs.) Wt./C (Lbs.)
K3190 - 1/2 1/2" 1 15/32" 6 25/32" 200 56
K3190 - 3/4 3/4" 1 9/16" 6 7/8" 200 59
K3190 - 1 1" 1 11/16" 7 1/16" 200 81
K3190 - 1 1/4 1 1/4" 1 7/8" 7 1/4" 200 86
K3190 - 1 1/2 1 1/2" 1 31/32" 7 11/32" 200 89
K3190 - 2 2" 2 7/32" 7 19/32" 200 96
K3190 - 2 1/2 2 1/2" 2 15/32" 7 27/32" 350 125
K3190 - 3 3" 2 25/32" 8 5/32" 350 134
K3190 - 4 4" 3 9/32" 8 25/32" 450 226
143
Straight J-Hook - K3191
Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for supporting light piperuns which require no clearance betweenmounting surfacesOrdering: Specify part number, size and finish
Part Number Nominal Pipe Size "A" "B" Design Load (Lbs.) Wt./C (Lbs.)
K3191 - 1/2 1/2" 21/32" 6 25/32" 200 54
K3191 - 3/4 3/4" 3/4" 6 7/8" 200 56
K3191 - 1 1" 15/16" 7 1/16" 200 78
K3191 - 1 1/4 1 1/4" 1 1/8" 7 1/4" 200 84
K3191 - 1 1/2 1 1/2" 1 7/32" 7 11/32" 200 86
K3191 - 2 2" 1 15/32" 7 19/32" 200 93
K3191 - 2 1/2 2 1/2" 1 23/32" 7 27/32" 350 120
K3191 - 3 3" 2 1/32" 8 3/8" 350 134
K3191 - 4 4" 2 21/32" 8 25/32" 450 223
144
Hinged Extension Split Pipe Clamp- K3198H
Part NumberNominalPipe Size Rod Size "A" "C" Design Load (Lbs.) Wt./C (Lbs.)
K3198H - 3/8 3/8" 3/8" - 16 31/32" 180 9
K3198H - 1/2 1/2" 3/8" - 16 1 1/16" 180 12
K3198H - 3/4 3/4" 3/8" - 16 1 7/32" 180 12
K3198H - 1 1" 3/8" - 16 1 11/32" 180 13
K3198H - 1 1/4 1 1/4" 3/8" - 16 1 19/32" 180 18
K3198H - 1 1/2 1 1/2" 3/8" - 16 1 23/32" 180 21
K3198H - 2 2" 3/8" - 16 2" 180 44
K3198H - 2 1/2 2 1/2" 1/2" - 13 2 11/32" 300 73
K3198H - 3 3" 1/2" - 13 2 23/32" 300 95
Material: Malleable IronStandard Finish: Plain or Electro-PlatedService: Designed for suspending non-insulated pipe horizontally or verticallyOrdering: Specify part number and finish
145
Part Number Nominal Tubing Size Rod Size "A" "C"Design Load
(Lbs.) Wt./C (Lbs.)
K3198HCT - 1/2 1/2" 3/8" - 16 5/8" 180 8
K3198HCT - 3/4 3/4" 3/8" - 16 13/16" 180 10
K3198HCT - 1 1" 3/8" - 16 15/16" 180 10
K3198HCT - 1 1/4 1 1/4" 3/8" - 16 1 1/8" 180 14
K3198HCT - 1 1/2 1 1/2" 3/8" - 16 1 9/16" 180 18
K3198HCT - 2 2" 3/8" - 16 1 7/8" 180 23
Hinged Extension Split Pipe Clamp - K3198HCU
Material: Malleable IronStandard Finish: CopperService: Designed for suspending copper tubing horizontally or verticallyOrdering: Specify part number and finish
146
2 Screw Extension Split Pipe Clamp - K3198
Part NumberNominal Pipe
Size Thread Size "A" Rod "C"Design Load
(Lbs.) Wt./C (Lbs.)
K3198R - 3/8 3/8" 3/8" - 16 31/32" 180 12
K3198R - 1/2 1/2" 3/8" - 16 1 1/16" 180 16
K3198R - 3/4 3/4" 3/8" - 16 1 7/32" 180 18
K3198R - 1 1" 3/8" - 16 1 11/32" 180 24
K3198R - 1 1/4 1 1/4" 3/8" - 16 1 19/32" 180 29
K3198R - 1 1/2 1 1/2" 3/8" - 16 1 23/32" 180 32
K3198R - 2 2" 3/8" - 16 2" 180 39
K3198R - 2 1/2 2 1/2" 1/2" - 13 2 11/32" 300 115
K3198R - 3 3" 1/2" - 13 2 23/32" 300 140
K3198R - 4 4" 1/2" - 13 3 11/32" 300 160
Material: Malleable Iron (Stainless Steel available)Standard Finish: Plain or Electro-PlatedService: Designed for suspending non-insulated pipe horizontallyOrdering: Specify part number and finish.
147
2 Screw Extension Split Pipe Clamp - K3198CU
Part Number Nominal Tubing Size Rod Size "A" "C" Design Load (Lbs.) Wt./C (Lbs.)
K3198RCT - 3/8 3/8" 3/8" - 16 11/16" 180 12
K3198RCT - 1/2 1/2" 3/8" - 16 1 11/16" 180 12
K3198RCT - 3/4 3/4" 3/8" - 16 7/8" 180 14
K3198RCT - 1 1" 3/8" - 16 1 1/16" 180 17
K3198RCT - 1 1/4 1 1/4" 3/8" - 16 1 1/8" 180 17
K3198RCT - 1 1/2 1 1/2" 3/8" - 16 1 5/16" 180 22
K3198RCT - 2 2" 3/8" - 16 1 1/2" 180 26
Material: Malleable IronStandard Finish: CopperService: Designed for suspending copper tubing horizontallyOrdering: Specify part number and finish
148
Part NumberNominalPipe Size
Rod Size"A" "B" "C"
Rod TakeOut "D"
Diameter"E" Bolt Size
DesignLoad(Lbs.)
Wt./C(Lbs.)
K3690 - 1/2 1/2" 3/8" - 16 2 3/32" 1" 1 11/16" 13/32" 1/4" - 20 x 2" 400 20
K3690 - 3/4 3/4" 3/8" - 16 2 11/32" 1" 1 13/16" 13/32" 1/4" - 20 x 2 1/4" 400 23
K3690 - 1 1" 3/8" - 16 2 19/32" 1" 1 15/16" 13/32" 1/4" - 20 x 2 1/2" 400 24
K3690 - 1 1/4 1 1/4" 3/8" - 16 2 13/16" 1" 2" 13/32" 1/4" - 20 x 2 3/4" 400 27
K3690 - 1 1/2 1 1/2" 3/8" - 16 3 1/16" 1" 2 1/8" 13/32" 1/4" - 20 x 3" 400 29
K3690 - 2 2" 3/8" - 16 3 1/2" 1" 2 5/16" 13/32" 1/4" - 20 x 3 1/2" 400 32
K3690 - 2 1/2 2 1/2" 1/2" - 13 4 7/16" 1" 3" 9/16" 3/8" - 16 x 4 1/2" 800 71
K3690 - 3 3" 1/2" - 13 4 7/8" 1" 3 1/8" 9/16" 3/8" - 16 x 5" 800 77
K3690 - 3 1/2 3 1/2" 1/2" - 13 5 3/16" 1" 3 3/16" 9/16" 3/8" - 16 x 5 1/2" 800 84
K3690 - 4 4" 5/8" - 11 6 1/8" 1 1/4" 3 7/8" 9/16" 3/8" - 16 x 6 1/2" 800 139
K3690 - 5 5" 5/8" - 11 6 3/4" 1 1/2" 4" 9/16" 3/8" - 16 x 7 1/2" 800 166
K3690 - 6 6" 3/4" - 10 7 3/4" 1 3/16" 4 7/16" 9/16" 3/8" - 16 x 8 1/2" 1000 226
K3690 - 8 8" 3/4" - 10 9 1/4" 1" 4 15/16" 9/16" 3/8" - 16 x 10 1/2" 1200 332
Adjustable “J” Hanger - K3690
Material: SteelStandard Finish: Electro-Plated (Hot-Dip Galvanized available with Electro-Plated hardware)Service: Designed for suspending insulated pipe (with shield) and non-insulated pipe allowing forvertical adjustment. Side hole permits wall mountingOrdering: Specify part number and finish
K3690PVC - Plastic Coated
Pipe Clamps
Pipe clamps presented in this section are designed for support and attachment ofpipe to structural steel. Various types of pipe clamps and sizes are available for nu-merous applications.Materials: Carbon Steel is used in the manufacturing of riser and pipe clamps.Stainless Steel and other materials are also available.Finishes: Finishes for pipe supports in this section are Plain Steel, Electro-PlatedZinc, Hot Dipped Galvanized, Red Primer, Plastic Coating, Copper Plated, StainlessSteel and other special coatings are also available.Notes: All hangers in this section are sized to fit schedule 40/80 pipe unless other-wise noted. Some steel items may be specially fabricated to accommodate otherpipe diameters. Products in this section are designed and manufactured in accor-dance with industry standards. RHK is not responsible for injuries and damagewhich could result from improper and negligent installation of the items.
115
Standard Pipe Strap - K2400
Part Number Pipe Size "A" "B" "C" "T" "W"
DesignLoad 1(Lbs.)
DesignLoad 2(Lbs.)
DesignLoad 3(Lbs.)
Wt./C(Lbs.)
K2400 - 1/2 1/2" 5/16" 7/16" 2 13/16" 10 Ga. 1 5/8" 600 150 105 23
K2400 - 3/4 3/4" 5/16" 7/16" 3" 10 Ga. 1 5/8" 600 150 105 26
K2400 - 1 1" 5/16" 7/16" 3 17/32" 10 Ga. 1 5/8" 600 150 120 31
K2400 - 1 1/4 1 1/4" 5/16" 7/16" 3 3/4" 10 Ga. 1 5/8" 600 150 120 36
K2400 - 1 1/2 1 1/2" 5/16" 7/16" 4 1/16" 10 Ga. 1 5/8" 600 150 120 39
K2400 - 2 2" 7/16" 11/16" 5 21/32" 1/4" 1 5/8" 1200 480 180 93
K2400 - 2 1/2 2 1/2" 7/16" 11/16" 6 5/32" 1/4" 1 5/8" 1200 480 180 106
K2400 - 3 3" 7/16" 11/16" 6 25/32" 1/4" 1 5/8" 1200 480 300 132
K2400 - 3 1/2 3 1/2" 7/16" 11/16" 7 9/32" 1/4" 1 5/8" 1200 480 300 151
K2400 - 4 4" 9/16" 11/16" 7 25/32" 1/4" 1 5/8" 1500 600 450 160
K2400 - 5 5" 9/16" 11/16" 8 7/8" 1/4" 1 5/8" 1500 600 450 192
K2400 - 6 6" 9/16" 11/16" 9 15/16" 1/4" 1 5/8" 1500 600 450 219
K2400 - 8 8" 9/16" 11/16" 11 31/32" 1/4" 1 5/8" 2000 800 600 297
K2400 - 10 10" 9/16" 11/16" 14" 1/4" 1 5/8" 2000 800 600 465
K2400 - 12 12" 9/16" 11/16" 16" 1/4" 1 5/8" 2000 800 600 560
K2400 - 14 14" 15/16" 1 5/16" 20 3/8" 3/8" 1 3/4" 2000 800 600 761
K2400 - 16 16" 15/16" 1 5/16" 22 3/8" 3/8" 1 3/4" 2000 800 600 861
K2400 - 18 18" 15/16" 1 5/16" 26 1/8" 1/2" 1 3/4" 2000 800 600 1297
K2400 - 20 20" 15/16" 1 5/16" 28 1/8" 1/2" 1 3/4" 2000 800 600 1426
K2400 - 24 24" 15/16" 1 5/16" 32 1/8" 1/2" 1 3/4" 2000 800 600 1682
Material: Steel (Stainless Steelavailable)Standard Finish: Plain or Electro-PlatedService: Designed for supportingpipe runs from strut supportsOrdering: Specify part numberand finish
Note: Ductile iron sizes available
DesignLoad 2
116
Two-Bolt Underground Clamp - K3132
Material: SteelStandard Finish: Plain or Electro-Plated (Hot-Dip Galvanized available)Service: Designed to prevent separation of caulked joints on AWWA ductile iron water pipesOrdering: Specify part number and finish (Order K3132W Lug Washers, Tie Rods, and Hex Nutsseparately
Part NumberNominalPipe Size "A" "B" Clamp "I.D." Bolt Size Wt./C (Lbs.)
K3132 - 4 4" 12 7/8" 9 3/4" 5" 5/8" - 11 x 3" 864
K3132 - 6 6" 14 3/4" 12" 7 1/16" 5/8" - 11 x 3" 1020
K3132 - 8 8" 17 1/4" 14 1/4" 9 3/16" 5/8" - 11 x 3" 1222
K3132 - 10 10" 19 3/8" 16 1/2" 11 3/8" 5/8" - 11 x 3" 1409
K3132 - 12 12" 21 7/8" 18 7/8" 13 1/2" 5/8" - 11 x 3" 1608
K3132 - 14 14" 26" 22 1/4" 15 3/4" 7/8" - 9 x 4 1/2" 4359
K3132 - 16 16" 28 3/8" 24 5/8" 17 7/8" 1" - 8 x 4 1/2" 6403
K3132 - 18 18" 31 3/8" 27 5/8" 20" 1 1/4" - 7 x 5" 7293
K3132 - 20 20" 33 1/2" 29 3/4" 22 1/8" 1 1/4" - 7 x 5" 8778
K3132 - 24 24" 39" 35 1/4" 26 3/8" 1 1/4" - 6 x 5 1/2" 11659
117
Lug Washer - K3132W
Part Number Tie Rod SizeFor Use with
Pipe Size Diameter "D" "E" "G" "H"Wt./C(Lbs.)
K3132W - 3/4 3/4" - 10 4" to 12" 7/8" 2 3/8" 5/8" 4 5/8" 74
K3132W - 1 1" - 8 14" to 16" 1 1/8" 3 1/2" 5/8" 2 1/2" 207
K3132W - 1 1/4 1 1/4" - 7 18" 1 3/8" 3 1/2" 5/8" 3 1/2" 236
K3132W - 1 3/8 1 3/8" - 6 20" 1 1/2" 4" 5/8" 4" 231
K3132W - 1 1/2 1 1/2" - 6 24" 1 5/8" 4" 5/8" 4" 259
Material: Ductile iron for K3132W - 3/4,steel for other sizesStandard Finish: Plain or Electro-PlatedService: Designed to use with K3132 Two-Bolt Underground Clamp for aligning andsecuring tie rodsOrdering: Specify part number and finish
118
Four Bolt Underground Clamp - K3134
Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed to prevent separation of caulked joints on AWWA ductile iron waterpipesOrdering: Specify part number and finish (Order K3134W Washer, Tie Rods and HexNuts separately)
PartNumber
NominalPipe Size "A" "B" Clamp "I.D." Bolt Size
MaximumTest Pressure
(psi)
Force onClamp(Lbs.)
Wt./C(Lbs.)
K3134 - 4 4" 14 7/16" 9 5/8" 5" 5/8" - 11 x 3" 250 4550 1012
K3134 - 6 6" 16 7/8" 11 7/8" 7 1/8" 5/8" - 11 x 3" 250 9340 1204
K3134 - 8 8" 19 1/8" 14 1/8" 9 5/16" 5/8" - 11 x 3 1/2" 250 16080 2091
K3134 - 10 10" 21 3/8" 16 5/8" 11 1/2" 3/4" - 10 x 4" 250 24180 2466
K3134 - 12 12" 25 1/8" 19 5/8" 13 1/2" 7/8" - 9 x 4" 250 34230 3537
K3134 - 14 14" 28 1/4" 22 1/4" 15 3/4" 7/8" - 9 x 4 1/2" 120 22200 4718
K3134 - 16 16" 32 1/8" 26 1/4" 17 7/8" 1" - 8 x 4 1/2" 115 27760 7155
K3134 - 18 18" 35 1/8" 28 1/8" 20" 1 1/4" - 7 x 5" 100 23900 8179
K3134 - 20 20" 37 3/4" 30 1/2" 22 1/8" 1 1/4" - 7 x 5" 75 27500 9856
K3134 - 24 24" 44 1/4" 36" 26 3/8" 1 1/2" - 6 x 5 1/2" 50 26200 13384
119
Washer - K3134W
Part Number Tie Rod SizeFor Use with
Pipe SizeDiameter
"D" "E" "F" Wt./C (Lbs.)
K3134W - 3/4 3/4" - 10 4" to 8" 7/8" 3" 1/2" 119
K3134W - 1 1" - 8 10" to 12" 1 1/8" 3 1/2" 1/2" 159
K3134W - 1 1/8 1 1/8" - 7 14" to 16" 1 1/4" 3 1/2" 5/8" 181
K3134W - 1 1/4 1 1/4" - 7 18" 1 3/8" 4" 3/4" 229
K3134W - 1 3/8 1 3/8" - 6 20" 1 1/2" 4" 3/4" 223
K3134W - 1 1/2 1 1/2" - 6 24" 1 5/8" 4 1/2" 3/4" 217
Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for use with K3134 Four-Bolt Underground Clamp to secure tie rodsOrdering: Specify part number and finish
120
Standard Pipe Clamp - K3140
Part NumberNominalPipe Size "A" "B" "C" Bolt Size
MaximumDesign Loadfor Service
Temperature650°F (Lbs.)
MaximumDesign Loadfor Service
Temperature750°F (Lbs.)
Wt./C(Lbs.)
K3140 - 1/2 1/2" 3/8" 31/32" 1 17/32" 5/16" - 18 x 1 1/4" 500 390 30
K3140 - 3/4 3/4" 9/16" 1 3/32" 1 21/32" 5/16" - 18 x 1 1/4" 500 390 31
K3140 - 1 1" 9/16" 1 5/16" 1 7/8" 5/16" - 18 x 1 1/4" 500 390 32
K3140 - 1 1/4 1 1/4" 17/32" 1 7/16" 2" 5/16" - 18 x 1 1/4" 500 390 39
K3140 - 1 1/2 1 1/2" 19/32" 1 21/32" 2 7/32" 5/16" - 18 x 1 1/4" 800 620 41
K3140 - 2 2" 9/16" 2 1/8" 2 3/4" 1/2" - 13 x 2" 1040 810 118
K3140 - 2 1/2 2 1/2" 5/8" 2 21/32" 3 9/32" 1/2" - 13 x 2" 1040 810 130
K3140 - 3 3" 5/8" 2 15/16" 3 9/16" 1/2" - 13 x 2" 1040 810 150
K3140 - 3 1/2 3 1/2" 5/8" 3 5/32" 3 25/32" 1/2" - 13 x 2" 1040 810 158
K3140 - 4 4" 3/4" 3 9/16" 4 5/16" 5/8" - 11 x 2 1/4" 1040 810 239
K3140 - 5 5" 3/4" 4 1/8" 4 7/8" 5/8" - 11 x 2 1/4" 1040 810 272
K3140 - 6 6" 7/8" 4 15/16" 5 13/16" 3/4" - 10 x 2 3/4" 1615 1260 541
K3140 - 8 8" 1" 6 1/16" 6 15/16" 3/4" - 10 x 3" 1615 1260 642
K3140 - 10 10" 1" 7 3/8" 8 11/16" 7/8" - 9 x 3 1/2" 2490 1950 1366
K3140 - 12 12" 1" 8 7/16" 9 3/4" 7/8" - 9 x 3 1/2" 2490 1950 1543
K3140 - 14 14" 1 1/8" 9 1/4" 10 5/8" 7/8" - 9 x 3 1/2" 2490 1950 2077
K3140 - 16 16" 1 1/8" 10 1/4" 11 5/8" 7/8" - 9 x 3 1/2" 2490 1950 2289
K3140 - 18 18" 1 1/4" 11 7/8" 13 1/4" 1" - 8 x 4" 3060 2390 3206
K3140 - 20 20" 1 3/8" 12 3/4" 14 1/8" 1 1/8" - 7 x 4 1/2" 3060 2390 3616
K3140 - 24 24" 1 5/8" 15 1/4" 16 7/8" 1 1/4" - 7 x 5" 3060 2390 5161
K3140 - 30 30" 2 1/4" 18 5/8" 21" 1 1/2" - 6 x 6" 3500 2740 10460
Material: Steel (Stainless Steel available)Standard Finish: Plain, Electro-Plated, or Hot-Dip Galva-nizedService: Designed for suspending non-insulated piperuns (Use with K3200 Weldless Eye Nut, K3210 Eye Rod,or K3211 Welded Eye Rod)Ordering: Specify part number and finish
121
Heavy Duty Pipe Clamp - K3142
PartNumber
NominalPipe Size "A" "B" "C" Bolt Size
MaximumDesign Loadfor Service
Temperature650°F (Lbs.)
MaximumDesign Loadfor Service
Temperature750°F (Lbs.)
Wt./C(Lbs.)
K3142 - 3 3" 1" 3 1/8" 4 1/8" 3/4" - 10 x 2 3/4" 3370 2640 404
K3142 - 4 4" 1" 3 3/4" 5 1/16" 7/8" - 9 x 3" 3515 2750 616
K3142 - 5 5" 1" 4 3/8" 5 11/16" 7/8" - 9 x 3" 3515 2750 687
K3142 - 6 6" 1 1/8" 5 1/4" 6 1/4" 1" - 8 x 3 1/2" 4865 3800 1293
K3142 - 8 8" 1 1/8" 6 1/4" 7 3/4" 1" - 8 x 4" 4865 3800 1523
K3142 - 10 10" 1 1/4" 7 11/16" 9 1/16" 1 1/4" - 7 x 4" 6010 4700 2348
K3142 - 12 12" 1 5/8" 9 1/8" 10 3/4" 1 1/4" - 7 x 5" 8675 6770 3749
K3142 - 14 14" 1 5/8" 10 1/8" 12" 1 1/2" - 6 x 5 1/2" 9120 7140 5011
K3142 - 16 16" 1 5/8" 11" 12 7/8" 1 3/4" - 5 x 5 1/2" 9120 7140 5885
K3142 - 18 18" 3" 14 1/2" 18 1/2" 2" - 4 1/2 x 7" 13800 10800 12902
K3142 - 20 20" 3" 16" 20" 2" - 4 1/2 x 7" 15300 11900 15113
K3142 - 24 24" 3 1/4" 18 1/2" 23" 2" - 4 1/2 x 8" 16300 12700 20561
K3142 - 30 30" 3 1/2" 22 1/2" 27 1/2" 2 1/4" - 4 1/2 x 9" 20500 16000 36658
Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for suspending non-insulated, heavy-duty pipe runs (use withK3200 Weldless Eye Nut, K3210 Eye Rodor K3211 Welded Eye Rod)Ordering: Specify part number and finish
122
Double Bolt Pipe Clamp - K3144...
Part NumberNominalPipe Size "A" Bolt Size "B¹" Bolt Size "B²" "C"
K3144 - 3/4 3/4" 5/8" 3/8" - 16 x 1 3/4" 1/2" - 13 x 2" 1 3/8"
K3144 - 1 1" 5/8" 3/8" - 16 x 1 3/4" 1/2" - 13 x 2" 1 3/8"
K3144 - 1 1/4 1 1/4" 5/8" 3/8" - 16 x 1 3/4" 1/2" - 13 x 2" 1 1/2"
K3144 - 1 1/2 1 1/2" 1 1/16" 1/2" - 13 x 2 1/2" 5/8" - 11 x 2 1/2" 1 13/16"
K3144 - 2 2" 1 1/16" 1/2" - 13 x 2 1/2" 5/8" - 11 x 2 1/2" 2 1/8"
K3144 - 2 1/2 2 1/2" 1 1/16" 1/2" - 13 x 2 1/2" 5/8" - 11 x 2 1/2" 2 3/8"
K3144 - 3 3" 1 1/16" 1/2" - 13 x 2 1/2" 5/8" - 11 x 2 1/2" 2 15/16"
K3144 - 4 4" 1 1/16" 5/8" - 11 x 2 3/4" 3/4" - 10 x 3" 3 1/2"
K3144 - 5 5" 1 1/16" 5/8" - 11 x 2 3/4" 3/4" - 10 x 3" 4"
K3144 - 6 6" 1 7/16" 3/4" - 10 x 3 1/4" 1" - 8 x 3 1/2" 5"
K3144 - 8 8" 1 7/16" 3/4" - 10 x 3 1/4" 1" - 8 x 3 1/2" 6"
K3144 - 10 10" 1 7/16" 3/4" - 10 x 3 1/4" 1" - 8 x 3 1/2" 7 1/8"
K3144 - 12 12" 1 7/16" 3/4" - 10 x 3 1/4" 1" - 8 x 3 1/2" 7 7/8"
K3144 - 14 14" 2" 1" - 8 x 4 1/2" 1 1/4" - 7 x 5" 9 1/16"
K3144 - 16 16" 2" 1" - 8 x 4 1/2" 1 1/4" - 7 x 5" 10 1/16"
K3144 - 18 18" 2" 1" - 8 x 4 1/2" 1 1/4" - 7 x 5" 11 1/16"
K3144 - 20 20" 2" 1" - 8 x 5" 1 1/4" - 7 x 5" 12 3/8"
K3144 - 24 24" 2" 1 1/8" - 7 x 5" 1 1/2" - 6 x 5 1/2" 14 3/4"
123
Double Bolt Pipe Clamp (cont.)
Part Number "D" "E" "F"
Maximum DesignLoad for Service
Temperature 650°F(Lbs.)
Maximum DesignLoad for Service
Temperature 750°F(Lbs.)
Wt./C(Lbs.)
K3144 - 3/4 4" 4 3/4" 1 7/8" 950 740 146
K3144 - 1 4" 4 3/4" 1 7/8" 950 740 147
K3144 - 1 1/4 4" 4 3/4" 2" 950 740 152
K3144 - 1 1/2 4 1/8" 4 7/8" 2 3/8" 1545 1200 200
K3144 - 2 5 1/8" 5 7/8" 2 11/16" 1545 1200 226
K3144 - 2 1/2 5 3/8" 6 1/8" 2 15/16" 1545 1200 239
K3144 - 3 5 15/16" 6 11/16" 3 1/2" 1545 1200 264
K3144 - 4 6 1/2" 7 5/8" 4 1/2" 2500 1950 672
K3144 - 5 7" 8 1/8" 5" 2500 1950 752
K3144 - 6 8 9/16" 9 15/16" 6 1/8" 2865 2240 1158
K3144 - 8 9 9/16" 10 15/16" 7 1/8" 2865 2240 1325
K3144 - 10 10 5/8" 12" 8 1/4" 3240 2530 1505
K3144 - 12 11 5/8" 13" 9 1/4" 3240 2530 1671
K3144 - 14 12 11/16" 14 5/16" 10 11/16" 4300 3360 3666
K3144 - 16 13 11/16" 15 5/16" 11 11/16" 4300 3360 3992
K3144 - 18 14 11/16" 16 5/16" 12 11/16" 4300 3360 4330
K3144 - 20 15 7/8" 17 1/2" 14" 4500 3520 5535
K3144 - 24 17 7/8" 19 1/2" 16 3/8" 4500 3520 6590
Material: Steel (Stainless Steel available)Standard Finish: Plain or Electro-PlatedService: Designed for suspending high-temperature(maximum 750°F) pipe runs requiring up to 4” thickinsulation (use with K3200 Welded Eye Rod)Ordering: Specify part number and finish. For ser-vice temperatures of 750°F thru 1050°F specify type304 Stainless Steel
124
Heavy Duty Double Bolt Pipe Clamp - K3146
Part NumberNominalPipe Size "A" Bolt Size "B¹" Bolt Size "B²"
K3146 - 6 6" 1 3/4" 3/4" - 10 x 3 1/2" 1" - 8 x 4"
K3146 - 8 8" 2" 3/4" - 10 x 4" 1" - 8 x 4 1/2"
K3146 - 10 10" 2 1/4" 1" - 8 x 4 1/2" 1 1/4" - 7 x 5"
K3146 - 12 12" 2 1/2" 1" - 8 x 5" 1 1/4" - 7 x 5 1/2"
K3146 - 14 14" 2 1/2" 1 1/8" - 7 x 5 1/2" 1 1/2" - 6 x 6"
K3146 - 16 16" 3" 1 1/4" - 7 x 6" 1 3/4" - 5 x 6 1/2"
K3146 - 18 18" 3 1/2" 1 1/2" - 6 x 7 1/2" 2" - 4 1/2 x 8"
K3146 - 20 20" 3 1/2" 1 1/2" - 6 x 7 1/2" 2" - 4 1/2 x 8"
K3146 - 24 24" 3 1/2" 1 1/2" - 6 x 7 1/2" 2" - 4 1/2 x 8"
K3146 - 30 30" 4 1/4" 1 3/4" - 5 x 8 1/2" 2 1/4" - 4 1/2 x 9"
PartNumber "C" "D" "E" "F"
Maximum DesignLoad for Service
Temperature 650°F(Lbs.)
Maximum DesignLoad for Service
Temperature 750°F(Lbs.) Wt./C (Lbs.)
K3146 - 6 4 3/4" 8 15/16" 10 3/16" 6" 3500 2740 1182
K3146 - 8 6" 10 3/8" 11 3/8" 7 1/4" 4800 3750 1742
K3146 - 10 7 1/4" 11 3/8" 13 1/8" 9" 5500 4300 2979
K3146 - 12 8 5/8" 12 9/16" 14 5/16" 10 3/8" 8675 6790 3847
K3146 - 14 9 5/8" 13 1/2" 15 1/2" 11 5/8" 9500 7400 6104
K3146 - 16 10 7/8" 14 7/8" 17 1/8" 13 1/8" 10000 7800 7899
K3146 - 18 12 1/2" 16 1/4" 18 1/4" 14 1/2" 13800 10800 10588
K3146 - 20 13 1/2" 17 1/4" 19 3/4" 16" 15300 11900 14180
K3146 - 24 15 1/2" 19 5/16" 22 5/16" 18 1/2" 16300 12700 19145
K3146 - 30 19 7/8" 28 1/4" 32 3/4" 24 3/8" 20500 16000 34983
Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for suspending heavy-duty, high temperature pipe runs requir-ing up to 4” thick insulation (use withK3200 Weldless Eye Nut, K3210 Eye Rodor K3211 Welded Eye RodOrdering: Specify part number and finish
125
Offset Pipe Clamp - K3148
Part NumberNominalPipe Size "A" Bolt Size "B" "C" "H"
Design Load(Lbs.)
Wt./C(Lbs.)
K3148 - 1/2 1/2" 2 1/2" 3/8" - 16 x 1 1/2" 6" 7/16" 190 106
K3148 - 3/4 3/4" 2 1/2" 3/8" - 16 x 1 1/2" 7 5/16" 7/16" 190 112
K3148 - 1 1" 2 5/8" 3/8" - 16 x 1 1/2" 7 9/16" 7/16" 190 123
K3148 - 1 1/4 1 1/4" 2 13/16" 3/8" - 16 x 1 1/2" 7 7/8" 7/16" 190 133
K3148 - 1 1/2 1 1/2" 2 15/16" 3/8" - 16 x 1 1/2" 8 1/4" 7/16" 190 140
K3148 - 2 2" 3 3/16" 3/8" - 16 x 1 3/4" 9 1/8" 7/16" 420 195
K3148 - 2 1/2 2 1/2" 3 7/16" 3/8" - 16 x 1 3/4" 10 1/2" 7/16" 420 226
K3148 - 3 3" 3 3/4" 3/8" - 16 x 1 3/4" 11 1/8" 7/16" 420 244
K3148 - 4 4" 4 1/4" 1/2" - 13 x 2" 12 1/2" 9/16" 610 358
K3148 - 5 5" 4 3/4" 1/2" - 13 x 2 1/4" 13 3/4" 9/16" 610 415
K3148 - 6 6" 5 5/16" 1/2" - 13 x 2 1/4" 16 1/2" 9/16" 870 685
K3148 - 8 8" 6 5/16" 1/2" - 13 x 2 1/2" 18 5/8" 9/16" 870 815
K3148 - 10 10" 7 3/4" 3/4" - 10 x 3" 23" 13/16" 870 2142
K3148 - 12 12" 8 3/4" 3/4" - 10 x 3" 25" 13/16" 870 2337
Material: Steel (Stainless Steel available)Standard Finish: Plain or Electro-PlatedService: Designed for supporting verticalor horizontal pipe runs at a fixeddistance from a wall or structureOrdering: Specify part number
Note: Ductile and cast iron sizes are available
126
Marine Hanger - K3149
Part NumberNominalPipe Size "A" Bolt Size "B" "C" Wt./C (Lbs.)
K3149 - 3/4 3/4" 12" 3/8" - 16 x 1 1/2" 4 7/16" 182
K3149 - 1 1" 12" 3/8" - 16 x 1 1/2" 4 11/16" 230
K3149 - 1 1/4 1 1/4" 12" 3/8" - 16 x 1 1/2" 5" 239
K3149 - 1 1/2 1 1/2" 12" 3/8" - 16 x 1 1/2" 5 1/4" 244
K3149 - 2 2" 12" 1/2" - 13 x 1 3/4" 6" 319
K3149 - 2 1/2 2 1/2" 12" 1/2" - 13 x 2" 7 1/4" 434
K3149 - 3 3" 12" 1/2" - 13 x 2" 7 7/8" 454
K3149 - 4 4" 12" 1/2" - 13 x 2" 9 1/4" 493
K3149 - 5 5" 12" 1/2" - 13 x 2" 10 1/2" 530
K3149 - 6 6" 12" 5/8" - 11 x 2 1/2" 12 1/2" 1142
K3149 - 8 8" 12" 5/8" - 11 x 2 1/2" 14 5/8" 1273
Material: Steel (Stainless Steel available)Standard Finish: Plain or Electro-PlatedService: Designed for suspending or supporting pipe runs where exact dis-tance from structure to pipe cannot be determined until installation. Fieldmodify legs to suit conditionsOrdering: Specify part number and finish
Note: Ductile and cast iron sizes are available
127
Standard Riser Clamp - K3373
Part Number Pipe Size "L" Bolt SizeDesign Load
(Lbs.)Wt./C(Lbs.)
K3373 - 1/2 1/2" 9" 3/8" - 16 x 1 1/4" 255 101
K3373 - 3/4 3/4" 9 1/4" 3/8" - 16 x 1 1/4" 255 105
K3373 - 1 1" 9 9/16" 3/8" - 16 x 1 1/4" 255 109
K3373 - 1 1/4 1 1/4" 10" 3/8" - 16 x 1 1/4" 255 112
K3373 - 1 1/2 1 1/2" 10 1/4" 3/8" - 16 x 1 1/2" 255 113
K3373 - 2 2" 10 3/4" 3/8" - 16 x 1 1/2" 255 165
K3373 - 2 1/2 2 1/2" 11 1/4" 3/8" - 16 x 1 1/2" 390 180
K3373 - 3 3" 11 15/16" 3/8" - 16 x 1 1/2" 530 195
K3373 - 3 1/2 3 1/2" 12 3/8" 1/2" - 13 x 1 3/4" 670 217
K3373 - 4 4" 12 7/8" 1/2" - 13 x 1 3/4" 810 228
K3373 - 5 5" 14" 1/2" - 13 x 1 3/4" 1160 480
K3373 - 6 6" 15 3/16" 1/2" - 13 x 2" 1570 526
K3373 - 8 8" 17 3/4" 5/8" - 11 x 2 1/2" 2500 957
K3373 - 10 10" 19 7/16" 5/8" - 11 x 2 1/2" 2500 1101
K3373 - 12 12" 21 11/16" 5/8" - 11 x 3" 2700 1622
K3373 - 14 14" 23 9/16" 5/8" - 11 x 3" 2700 1732
K3373 - 16 16" 26 3/8" 3/4" - 10 x 3 1/4" 2900 2959
K3373 - 18 18" 28 7/8" 3/4" - 10 x 3 1/4" 2900 3235
K3373 - 20 20" 30 7/8" 3/4" - 10 x 3 1/2" 2900 3568
K3373 - 24 24" 34 7/8" 3/4" - 10 x 3 1/2" 2900 4064
K3373 - 30 30" 40 3/4" 7/8" - 9 x 3 1/2" 2900 6016
Material: Steel (Stainless Steel available)Standard Finish: Plain, Electro-Plated, or Hot-DipGalvanizedService: Designed for supporting and stabilizingvertical pipe runs. Clamp is fitted for steel pipeand preferable installed below a coupling or shearlugs. Torque bolts to values given on page __Ordering: Specify part number and finish
K3373PVC Plastic Coated
128
Riser Clamp Copper- K3373CU
Part NumberNominal Tubing
Size "L" Bolt Size Design Load (Lbs.) Wt./C (Lbs.)
K3373CT - 1/2 1/2" 8 3/4" 5/16" - 18 x 1" 75 72
K3373CT - 3/4 3/4" 9 1/16" 5/16" - 18 x 1" 75 73
K3373CT - 1 1" 9 5/16" 3/8" - 16 x 1" 120 74
K3373CT - 1 1/4 1 1/4" 9 5/8" 3/8" - 16 x 1" 150 77
K3373CT - 1 1/2 1 1/2" 9 3/4" 3/8" - 16 x 1 1/4" 150 111
K3373CT - 2 2" 10 7/16" 3/8" - 16 x 1 1/4" 150 120
K3373CT - 2 1/2 2 1/2" 10 15/16" 3/8" - 16 x 1 1/4" 300 128
K3373CT - 3 3" 11 7/16" 3/8" - 16 x 1 1/4" 300 136
K3373CT - 3 1/2 3 1/2" 11 15/16" 3/8" - 16 x 1 1/4" 300 145
K3373CT - 4 4" 12 1/2" 1/2" - 13 x 1 3/4" 300 170
K3373CT - 5 5" 13 5/8" 1/2" - 13 x 2" 500 355
K3373CT - 6 6" 14 5/8" 1/2" - 13 x 2" 500 386
Material: SteelStandard Finish: CopperService: Designed to support and stabilizevertical runs of copper tubing (available withplastic coasting to provide additional separa-tion between tubing and hanger)Ordering: Specify part number and finish
K3373CUPVC - Plastic Coated
Pipe Rollers + Pipe SupportsPipe rollers presented in this section are designed to accommodate for longitudinalmovement due to the expansion and contraction of both insulated and non-insulatedpipe.Material: Carbon Steel and Cast Iron rollers are used in the manufacturing of piperoller supports. Stainless Steel and other materials are also available.Finishes: Finishes for pipe supports in this section are Plain Steel, Electro-Plated Zinc,Hot Dipped Galvanized, Red Primer, Plastic Coating, Stainless Steel and other specialcoatings are also available.Notes: Products in this section are designed and manufactured in accordance with in-dustry standards. RHK is not responsible for injuries and damage which could resultfrom improper and negligent installation of the items.
91
Pipe Rollers 6” to 18” Pipe - K379
Insulation Thickness
Pipe Size 0" 1" 1 1/2" 2" 2 1/2" 3" 4"
6" 6 7/8" 7 7/8" 8 3/8" 8 7/8" 9 3/8" 9 7/8" 10 15/16"
8" 7 13/16" 8 7/8" 9 3/8" 9 7/8" 10 7/16" 10 15/16" 11 7/8"
10" 8 13/16" 9 7/8" 10 7/16" 10 15/16" 11 3/8" 11 7/8" 12 13/16"
12" 9 3/4" 10 15/16" 11 3/8" 11 7/8" 12 5/16" 12 13/16" 13 3/4"
14" 10 5/16" 11 3/8" 11 7/8" 12 5/16" 12 13/16" 13 1/4" 14 1/4"
16" 11 5/16" 12 5/16" 12 13/16" 13 1/4" 13 3/4" 14 1/4" 15 1/8"
18" 12 1/4" 13 1/4" 13 3/4" 14 3/16" 14 11/16" 15 1/8" 16 1/16"
Material: Steel with malleable iron rollersStandard Finish: Electro-PlatedService: Designed to mount on strut(metal framing) for the support of pipewith longitudinal movement.Ordering: Specify part number and finishDesign Load: 1500 Lbs.
Insulation Thickness
Pipe Size 0" 1" 1 1/2" 2" 2 1/2" 3" 4"
6" 9 9/16" 10 3/16" 10 5/8" 11" 11 3/8" 11 3/4" 12 1/2"
8" 10 1/4" 11 1/16" 11 3/8" 11 3/4" 12 3/16" 12 1/2" 13 1/4"
10" 11" 11 3/4" 12 1/8" 12 1/2" 12 13/16" 13 1/8" 13 7/8"
12" 11 11/16" 12 9/16" 12 7/8" 13 1/4" 13 9/16" 13 7/8" 14 5/8"
14" 12 1/16" 12 7/8" 13 3/16" 13 9/16" 13 7/8" 14 1/4" 14 7/8"
16" 12 3/4" 13 1/2" 13 7/8" 14 13/16" 14 1/2" 14 7/8" 15 1/2"
18" 13 1/2" 14 1/4" 14 5/8" 15" 15 5/16" 15 5/8" 16 5/16"
Reference Chart: B Dimension
Note: Not for continuous cycling applications
Reference Chart: A Dimension
92
Pipe Rollers 1/2” to 8” Pipe - K218...
Material: Steel with malleable iron rollersStandard Finish: Electro-PlatedService: Designed to mount on strut (metalframing) for the support of pipe with longi-tudinal movement.Ordering: Specify part number and finishDesign Load: 500 Lbs.
Notes: Channel and mounting hardware not included. Not for continuous cycling applications
93
Insulation Thickness
Pipe Size 0" 1" 1 1/2" 2" 2 1/2" 3" 4"
1/2" 2 11/16" - - - - - -
3/4" 2 13/16" 3 7/8" 4 3/8" 4 7/8" - - -
1" 2 15/16" 4 3/16" 4 11/16" 5 1/16" - - -
1 1/4" 3 1/8" 4 3/16" 4 5/8" 5 1/8" - - -
1 1/2" 3 1/4" 4 3/8" 4 7/8" 5 5/16" 5 3/4" - -
2" 3 9/16" 4 11/16" 5 1/16" 5 5/8" 6 1/16" - -
2 1/2" 3 13/16" 4 7/8" 5 5/16" 6" 6 3/8" - -
3" 4 1/8" 5 1/16" 5 9/16" 6 1/8" 6 7/16" 7" -
3 1/2" 4 3/8" 5 5/16" 5 13/16" 6 1/4" 6 11/16" 7 1/4" -
4" 4 5/8" 5 9/16" 6 1/16" 6 7/16" 6 15/16" 7 3/8" -
5" 5 1/2" 6 1/6" 6 7/16" 7" 7 3/8" 7 7/8" 8 13/16"
6" 5 1/2" 6 7/16" 6 15/16" 7 3/8" 7 15/16" 8 1/2" 9 1/2"
8" 6 15/16" 7 3/8" 7 15/16" 8 7/16" 8 15/16" - -
Reference Chart: B Dimension
Insulation Thickness
Pipe Size 0" 1" 1 1/2" 2" 2 1/2" 3" 4"
1/2" 7 1/4" - - - - - -
3/4" 7 1/4" 7 1/4" 7 5/8" 8" - - -
1" 7 1/4" 7 1/4" 7 5/8" 8 1/4" - - -
1 1/4" 7 1/4" 7 1/4" 8" 8 1/4" - - -
1 1/2" 7 1/4" 7 5/8" 8" 8 1/2" 9" - -
2" 7 1/4" 7 5/8" 8 1/2" 8 1/2" 9" - -
2 1/2" 7 1/4" 8" 8 1/2" 9" 10" - -
3" 7 1/4" 8 1/2" 9" 9" 10" 10" -
3 1/2" 7 1/4" 8 1/2" 9" 10" 10" 10" -
4" 7 5/8" 9" 9" 10" 10" 10" -
5" 8 1/2" 9" 10" 10" 11" 11" 12"
6" 9" 10" 10" 11" 11" 11" 12"
8" 10" 11" 11" 11" 12" - -
Reference Chart: A Dimension
Pipe Rollers 1/2” to 8” Pipe - K218 (cont.)
94
Part Number "A" Wt./C (Lbs.)
K219 7 1/4" 253
K219 - 1 8" 258
K219 - 2 9" 263
K219 - 3 10" 269
K219 - 4 10 7/8" 274
K219 - 5 11 5/8" 279
Material: Steel with malleable iron rollersStandard Finish: Electro-PlatedService: Designed to mount on strut (metalframing) for the support of pipe with longitu-dinal movement.Ordering: Specify part number and finishDesign Load: 750 Lbs.
Note: Not for continuous cycling applications
Pipe Rollers 3/4” to 12” Pipe - K219...
95
Pipe Rollers 3/4” to 12” Pipe (cont.)
Insulation Thickness
Pipe Size 0" 1" 1 1/2" 2" 2 1/2" 3" 4"
1/2" K219 - - - - - -
3/4" K219 K219 K219 K219 - 1 - - -
1" K219 K219 K219 - 1 K219 - 1 - - -
1 1/4" K219 K219 K219 - 1 K219 - 1 - - -
1 1/2" K219 K219 K219 - 1 K219 - 2 K219 - 2 - -
2" K219 K219 - 1 K219 - 1 K219 - 2 K219 - 2 - -
2 1/2" K219 K219 - 1 K219 - 2 K219 - 2 K219 - 3 - -
3" K219 K219 - 1 K219 - 2 K219 - 2 K219 - 3 K219 - 3 -
3 1/2" K219 - 1 K219 - 2 K219 - 2 K219 - 3 K219 - 3 K219 - 4 -
4" K219 - 1 K219 - 2 K219 - 2 K219 - 3 K219 - 3 K219 - 4 -
5" K219 - 1 K219 - 2 K219 - 3 K219 - 3 K219 - 4 K219 - 4 K219 - 5
6" K219 - 2 K219 - 3 K219 - 3 K219 - 4 K219 - 4 K219 - 5 K219 - 5
8" K219 - 3 K219 - 4 K219 - 4 K219 - 5 K219 - 5 - -
10" K219 - 4 K219 - 5 - - - - -
12" K219 - 5 - - - - - -
Insulation Thickness
Pipe Size 0" 1" 1 1/2" 2" 2 1/2" 3" 4"
1/2" 2 11/16" - - - - - -
3/4" 2 13/16" 3 7/8" 4 1/2" 4 7/8" - - -
1" 2 15/16" 4 3/16" 4 5/8" 5 1/16" - - -
1 1/4" 3 1/8" 4 3/16" 4 5/8" 5 1/8" - - -
1 1/2" 3 1/4" 4 7/16" 4 7/8" 5 1/4" 5 3/8" - -
2" 3 9/16" 4 5/8" 5 3/16" 5 1/2" 6 1/16" - -
2 1/2" 3 3/4" 4 7/8" 5 1/4" 6" 6 3/8" - -
3" 4 1/8" 5 1/8" 5 9/16" 6 1/16" 6 7/16" 6 15/16" -
3 1/2" 4 1/8" 5 1/4" 5 13/16" 6 1/4" 6 11/16" 7 1/16" -
4" 4 9/16" 5 1/2" 6 1/16" 6 7/16" 6 15/16" 7 3/8" -
5" 5 1/16" 6 1/16" 6 7/16" 7" 7 3/8" 7 7/8" 8 15/16"
6" 5 7/16" 6 7/16" 6 15/16" 7 3/8" 7 7/8" 8 15/16" 9 9/16"
8" 6 3/8" 7 7/16" 7 15/16" 8 3/8" 9" - -
10" 7 5/16" 8 3/16" - - - - -
12" 8 1/4" - - - - - -
96
Adjustable Steel Yoke Pipe Roll - K3110...
Material: Steel with cast iron rollerStandard Finish: Plain or Electro-PlatedService: Designed for suspending pipe where longitudinal movement and verticaladjustment is required. When used with insulated pipe, see K3160 - K3165 PipeCovering Protection Saddle charts for proper sizing on pages 66-73Ordering: Specify part number and finish
Notes: If using D.I. pipe refer to page 180 for sizing. Non-metallic rollers with stainlesssteel yoke and hardware are available for most sizes (K3110NM-Pipe Size). Not forcontinuous cycling applications
97
Adjustable Steel Yoke Pipe Roll - K3110 (cont.)
Part NumberNominalPipe Size
Rod Size"A" "B"
K3110 - 2 2" 3/8" - 16 1 9/16"
K3110 - 2 1/2 2 1/2" 1/2" - 13 1 7/8"
K3110 - 3 3" 1/2" - 13 2 3/16"
K3110 - 3 1/2 3 1/2" 1/2" - 13 2 1/2"
K3110 - 4 4" 5/8" - 11 2 3/4"
K3110 - 5 5" 5/8" - 11 3 3/8"
K3110 - 6 6" 3/4" - 10 3 15/16"
K3110 - 8 8" 3/4" - 10 5 1/16"
K3110 - 10 10" 7/8" - 9 6 1/4"
K3110 - 12 12" 7/8" - 9 7 3/8"
K3110 - 14 14" 1" - 8 8 1/4"
K3110 - 16 16" 1" - 8 9 1/4"
K3110 - 18 18" 1" - 8 10 3/8"
K3110 - 20 20" 1 1/4" - 7 11 1/2"
K3110 - 24 24" 1 1/2" - 6 13 13/16"
Part Number "C" "D" "E" "F"Maximum O.D.
CoveringDesign
Load (Lbs.)Wt./C(Lbs.)
K3110 - 2 4 3/4" 2 3/8" 1 7/16" 2 7/8" 2 5/8" 150 123
K3110 - 2 1/2 6" 3 3/16" 2" 3 1/4" 3" 225 178
K3110 - 3 6 5/8" 3 1/2" 2" 3 7/8" 3 5/8" 310 206
K3110 - 3 1/2 7 1/4" 3 3/4" 2" 4 3/8" 4 1/8" 390 267
K3110 - 4 7 7/8" 4" 2" 4 7/8" 4 11/16" 475 344
K3110 - 5 9 3/16" 4 9/16" 2" 5 15/16" 5 3/4" 685 600
K3110 - 6 10 3/8" 5 1/16" 2" 7" 6 3/4" 780 800
K3110 - 8 12 5/8" 6 1/16" 2" 9" 8 3/4" 780 1300
K3110 - 10 14 15/16" 7 3/16" 2 1/16" 11 1/8" 10 3/4" 965 1600
K3110 - 12 17 3/8" 8 3/8" 2 1/4" 13 3/8" 13" 1200 2600
K3110 - 14 19" 8 3/4" 2 1/4" 14 1/2" 14 1/4" 1200 3400
K3110 - 16 20 3/4" 9 3/4" 2" 16 3/8" 16 1/8" 1200 3900
K3110 - 18 23 11/16" 11 7/16" 2 11/16" 18 3/8" 18 1/8" 1400 4900
K3110 - 20 25 7/8" 12 1/4" 2 1/2" 20 3/8" 20 1/8" 1600 6686
K3110 - 24 31 9/16" 15" 3 1/2" 24 5/8" 24 3/8" 1800 11630
98
Pipe Rollers 16” to 30” Pipe - K479
Insulation Thickness
Pipe Size 0" 1" 1 1/2" 2" 2 1/2" 3" 4"
16" 15 3/16" 15 5/8" 15 7/8" 16" 16 1/4" 16 1/2" 17"
18" 15 1/2" 16" 16 3/16" 16 3/8" 16 9/16" 16 3/4" 17 3/16"
20" 16" 16 3/8" 16 9/16" 16 7/8" 16 15/16" 17 3/16" 17 1/2"
24" 16 13/16" 17 5/16" 17 1/2" 17 1/2" 17 11/16" 17 7/8" 18 1/8"
30" 17 13/16" 18 1/4" 18 3/8" 18 9/16" 18 7/8" 18 7/8" 19 1/4"
Insulation Thickness
Pipe Size 0" 1" 1 1/2" 2" 2 1/2" 3" 4"
16" 10 13/16" 11 15/16" 12 3/8" 12 15/16" 13 3/8" 13 15/16" 14 15/16"
18" 11 7/8" 12 15/16" 13 7/16" 13 15/16" 14 7/16" 14 15/16" 15 15/16"
20" 12 3/16" 13 15/16" 14 7/16" 14 7/8" 15 7/16" 15 7/8" 16 15/16"
24" 14 13/16" 15 7/8" 16 3/8" 16 7/8" 17 3/8" 17 7/8" 18 7/8"
30" 17 13/16" 18 7/8" 19 3/8" 19 7/8" 20 3/8" 20 5/16" 21 15/16"
Reference Chart: B Dimension
Material: Steel with malleable iron rollersStandard Finish: Electro-PlatedService: Designed to mount on strut (metal framing) for the sup-port of pipe with longitudinal movementOrdering: Specify part number and finishDesign Load: 2000 Lbs.
Note: Not for continuous cycling applications
Reference Chart: A Dimension
99
Pipe Roll with Socket - K3114
Part NumberNominalPipe Size
Rod Size"A" "B" "C" "D" "E"
MaximumO.D.
Covering
DesignLoad(Lbs.)
Wt./C(Lbs.)
K3114 - 2 2" 3/8" - 16 2 5/8" 4 1/8" 1 9/16" 3/4" 3 3/4" 600 119
K3114 - 2 1/2 2 1/2" 1/2" - 13 3 1/8" 4 7/8" 1 7/8" 3/4" 3 3/4" 660 140
K3114 - 3 3" 1/2" - 13 3 3/4" 5 1/2" 2 3/16" 3/4" 4 1/2" 700 158
K3114 - 3 1/2 3 1/2" 1/2" - 13 4 1/4" 6 1/8" 2 1/2" 3/4" 5" 750 170
K3114 - 4 4" 5/8" - 11 4 3/4" 6 3/4" 2 3/4" 3/4" 5 7/8" 750 188
K3114 - 5 5" 5/8" - 11 5 13/16" 8 1/16" 3 3/8" 3/4" 7" 750 246
K3114 - 6 6" 3/4" - 10 6 7/8" 9 9/16" 3 15/16" 1 1/8" 8 1/4" 1070 504
K3114 - 8 8" 7/8" - 9 8 7/8" 11 15/16" 5 1/16" 1 1/8" 10 1/2" 1350 658
K3114 - 10 10" 7/8" - 9 11" 14 1/16" 6 1/4" 1 1/8" 12 3/4" 1730 849
K3114 - 12 12" 7/8" - 9 13" 15 13/16" 7 3/8" 1 1/8" 14 3/4" 2400 1200
K3114 - 14 14" 1" - 8 14 1/4" 17 3/4" 8 1/4" 1 1/2" 16 1/4" 3130 2289
K3114 - 16 16" 1" - 8 16 1/4" 19 3/4" 9 1/4" 1 1/2" 18" 3970 2497
K3114 - 18 18" 1" - 8 18 1/4" 21 7/8" 10 3/8" 1 1/2" 20 1/4" 4200 2899
K3114 - 20 20" 1 1/4" - 7 20 1/4" 24 1/4" 11 1/2" 1 1/2" 22 1/2" 4550 3637
K3114 - 24 24" 1 1/2" - 6 24 1/4" 28 7/8" 13 13/16" 2" 26 1/2" 6160 5664
K3114 - 30 30" 1 1/2" - 6 30 1/4" 35 1/2" 17 1/4" 2" 32 1/2" 7290 9437
Material: Steel axle with castiron roller/malleable socketsStandard Finish: Plain or Electro-PlatedService: Designed for suspend-ing piping where longitudinalmovement and vertical adjust-ment is required. When usedwith insulated pipe, see K3160 -K3165 Pipe Covering Saddlecharts for proper sizing on pages66-73Ordering: Specify part numberand finish
Notes: If using D.I. pipe refer to page 180 for sizing. Non-metallic rollers with hot-dip galva-nized sockets and stainless steel hardware are available for most sizes. Not for continuouscycling applications.
100
Long Pattern Pipe - K3114R
Part NumberNominalPipe Size "A" "B" "C"
Axle Diameter"D" "L" Wt./C (Lbs.)
K3114R - 2 2" 1 1/16" 3/4" 1 9/16" 3/8" 2 5/8" 29
K3114R - 2 1/2 2 1/2" 1 1/4" 7/8" 1 7/8" 1/2" 3 1/8" 47
K3114R - 3 3" 1 3/8" 7/8" 2 3/16" 1/2" 3 3/4" 62
K3114R - 3 1/2 3 1/2" 1 1/2" 1" 2 1/2" 1/2" 4 1/4" 71
K3114R- 4 4" 1 19/32" 1" 2 3/4" 1/2" 4 3/4" 96
K3114R - 5 5" 1 7/8" 1 1/8" 3 3/8" 5/8" 5 13/16" 131
K3114R- 6 6" 2 1/8" 1 1/4" 3 15/16" 3/4" 6 7/8" 207
K3114R - 8 8" 2 5/8" 1 1/2" 5 1/16" 7/8" 8 7/8" 323
K3114R - 10 10" 3 3/16" 1 3/4" 6 1/4" 7/8" 11" 482
K3114R - 12 12" 3 3/4" 2" 7 3/8" 1" 13" 854
K3114R - 14 14" 4 3/8" 2 1/2" 8 1/4" 1 1/8" 14 1/4" 1150
K3114R - 16 16" 4 5/8" 2 1/2" 9 1/4" 1 1/4" 16 1/4" 1200
K3114R - 18 18" 5 1/8" 2 3/4" 10 3/8" 1 1/4" 18 1/4" 1550
K3114R - 20 20" 5 5/8" 3" 11 1/2" 1 3/8" 20 1/4" 2080
K3114R - 24 24" 6 3/4" 3 5/8" 13 13/16" 1 1/2" 24 1/4" 3300
K3114R - 30 30" 8 1/2" 4 1/2" 17 1/4" 1 3/4" 30 1/4" 6200
Material: Cast IronStandard Finish: Plain or Electro-PlatedService: Designed for supportingpipe runs with longitudinal move-ment. Use with steel rod axleOrdering: Specify part number andfinish
Notes: If using D.I. pipe refer to page 180 for sizing. Non-metallic rollers with hot-dip gal-vanized sockets and stainless steel hardware are available for most sizes
101
Short Pattern Pipe Roller - K3117R
Part Number Nominal Pipe Size Axle Diameter "A" "D" "L" Wt./C (Lbs.)
K3117R - 2 to 3 1/2 2" to 3 1/2" 1/2" 1 7/8" 2 3/4" 70
K3117R- 4 to 6 4" to 6" 1/2" 2 1/16" 3 3/4" 114
K3117R - 8 to 10 8" to 10" 3/4" 3 1/4" 6" 329
K3117R - 12 to 14 12" to 14" 7/8" 4" 8" 600
K3117R - 16 to 20 16" to 20" 1 1/8" 4 1/2" 9" 781
K3117R - 24 24" 1 1/4" 4 7/16" 10" 842
K3117R - 30 30" 1 3/4" 5 1/2" 12 1/2" 1385
K3117R - 36 to 42 36" to 42" 2" 6" 14 7/8" 1585
Material: Cast IronStandard Finish: Plain or Electro-PlatedService: Designed for supporting pipe runs with longitudinal movement.Use with steel rod axleOrdering: Specify part number and finish
102
Steel Roller Stand - K3117SL...
Part Number Nominal Pipe Size "A" "B" "C" "D"
K3117SL - 2 to 3 1/2
2" 1 3/4" 8 3/8" 6" 4"
2 1/2" 1 3/4" 8 3/8" 6" 4"
3" 1 3/4" 8 3/8" 6" 4"
3 1/2" 1 3/4" 8 3/8" 6" 4"
K3117SL - 4 to 6
4" 2 1/16" 9 7/8" 6" 4 1/4"
5" 2 1/16" 9 7/8" 6" 4 1/4"
6" 2 1/16" 9 7/8" 6" 4 1/4"
K3117SL - 8 to 108" 3 7/16" 8 5/8" 8" 5"
10" 3 7/16" 8 5/8" 8" 5"
K3117SL - 12 to 1412" 3 7/8" 10 15/16" 8" 6"
14" 3 7/8" 10 15/16" 8" 6"
K3117SL - 16 to 20
16" 4 1/4" 12 3/8" 10" 6 1/2"
18" 4 1/4" 12 3/8" 10" 6 1/2"
20" 4 1/4" 12 3/8" 10" 6 1/2"
K3117SL - 24 24" 4 3/8" 13 1/2" 10" 6 1/2"
K3117SL - 30 30" 5 1/8" 17" 10 3/4" 8"
K3117SL - 36 to 4236" 5 3/4" 20" 12" 9"
42" 5 3/4" 20" 12" 9"
Notes: If using D.I. pipe refer to page 180 for sizing. Non-metallic rollers with hot-dipgalvanized sockets and stainless steel hardware are available for most sizes
103
Steel Roller Stand (cont.)
Part Number "E"Diameter
"F"Diameter
"G" "H" "J"
DesignLoad(Lbs.)
Wt./C(Lbs.)
K3117SL - 2 to 3 1/2
3 11/16" 1/2" 1" 3 7/16" 6 3/8" 390 508
3 15/16" 1/2" 1" 3 7/16" 6 3/8" 390 508
4 1/4" 1/2" 1" 3 7/16" 6 3/8" 390 508
4 1/2" 1/2" 1" 3 7/16" 6 3/8" 390 508
K3117SL - 4 to 6
5" 1/2" 1" 4 11/16" 7 7/8" 950 631
5 9/16" 1/2" 1" 4 11/16" 7 7/8" 950 631
6 1/16" 1/2" 1" 4 11/16" 7 7/8" 950 631
K3117SL - 8 to 108 13/16" 5/8" 1" 7" 4" 2100 1271
9 7/8" 5/8" 1" 7" 4" 2100 1271
K3117SL - 12 to 1411 7/16" 3/4" 1" 9 1/16" 5 3/4" 3075 1994
12 1/16" 3/4" 1" 9 1/16" 5 3/4" 3075 1994
K3117SL - 16 to 20
13 5/8" 13/16" 1" 10 1/4" 6 3/4" 4980 3423
14 11/16" 13/16" 1" 10 1/4" 6 3/4" 4980 3423
15 11/16" 13/16" 1" 10 1/4" 6 3/4" 4980 3423
K3117SL - 24 17 11/16" 13/16" 1" 11 3/8" 7 1/2" 6100 4710
K3117SL - 30 21 3/4" 1 1/16" 1" 14 1/4" 10" 7500 7132
K3117SL - 36 to 4225 5/16" 1 3/16" 1" 17" 12" 12000 10386
28 5/16" 1 3/16" 1" 17" 12" 12000 10386
Material: Steel with cast iron rollerStandard Finish: Plain or Electro-PlatedService: Designed for support of pipe with longitudinal movement.When used with insulated pipe, see K3160 - K3165 Pipe CoveringProtection Saddle charts for proper sizing on pages 66-73Ordering: Specify part number and finish
104
Adjustable Roller with Base Plate - K3118SL...
Notes: If using D.I. pipe refer to page 180 for sizing. Non-metallic rollers with hot-dip gal-vanized sockets and stainless steel hardware are available for most sizes. Not for con-tinuous cycling applications
Material: Steel with cast iron rollerStandard Finish: Plain or Electro-PlatedService: Designed for support of pipe where longitudinal movement and verticaladjustments are required. When used with insulated pipe, see K3160 - K3165Pipe Covering Protection Saddle charts for proper sizing on pages 66-73Ordering: Specify part number and finish
105
Part Number Nominal Pipe Size "A" "B"
K3118SL - 2 to 3 1/2
2" 6 7/8" 6"
2 1/2" 6 7/8" 6"
3" 6 7/8" 6"
3 1/2" 6 7/8" 6"
K3118SL - 4 to 6
4" 8 1/8" 6"
5" 8 1/8" 6"
6" 8 1/8" 6"
K3118SL - 8 to 108" 10 5/8" 8"
10" 10 5/8" 8"
K3118SL - 12 to 1412" 13" 8"
14" 13" 8"
K3118SL - 16 to 20
16" 14 5/8" 10"
18" 14 5/8" 10"
20" 14 5/8" 10"
K3118SL - 24 24" 15 3/4" 10"
K3118SL - 30 30" 19 1/4" 10 1/2"
Part Number"C"
Minimum"C"
Maximum "D" "E" "F"Design Load
(Lbs.)Wt./C(Lbs.)
K3118SL - 2 to 3 1/2
4 3/4" 5 5/8" 3 7/8" 1" 1" 390 1100
5" 5 7/8" 3 7/8" 1" 1" 390 1100
5 5/16" 6 3/16" 3 7/8" 1" 1" 390 1100
5 9/16" 6 7/16" 3 7/8" 1" 1" 390 1100
K3118SL - 4 to 6
6 3/16" 7 7/16" 5 1/8" 1" 1" 950 1310
6 3/4" 8" 5 1/8" 1" 1" 950 1310
7 1/4" 8 1/2" 5 1/8" 1" 1" 950 1310
K3118SL - 8 to 1010 1/8" 11 11/16" 7 3/8" 1" 1 1/8" 2100 2725
11 3/16" 12 3/4" 7 3/8" 1" 1 1/8" 2100 2725
K3118SL - 12 to 1412 3/4" 14 1/8" 9 1/2" 1" 1 1/8" 3075 3612
13 3/8" 14 3/8" 9 1/2" 1" 1 1/8" 3075 3612
K3118SL - 16 to 20
15 3/8" 17 1/4" 11 1/8" 1" 1 1/4" 4980 6384
16 3/8" 18 1/4" 11 1/8" 1" 1 1/4" 4980 6384
17 3/8" 19 1/4" 11 1/8" 1" 1 1/4" 4980 6384
K3118SL - 24 19 1/4" 21 1/4" 12 1/4" 1" 1 3/8" 6100 8437
K3118SL - 30 24 7/16" 26 11/16" 15 3/4" 1" 1 5/8" 7500 12528
Adjustable Roller with Base Plate - K3118SL (cont.)
106
Notes: If using D.I. pipe refer to page 180 for sizing. Non-metallic rollers with hot-dip gal-vanized sockets and stainless steel hardware are available for most sizes. Not for con-tinuous cycling applications
Material: Steel with cast iron rollerStandard Finish: Plain or Electro-PlatedService: Designed for support of pipe with longitudinal movement. Whenused with insulated pipe, see K3160 - K3165 Pipe Covering Protection Sad-dle charts for proper sizing on pages 66-73Ordering: Specify part number and finish
Steel Roller Stand - K3119SL...
107
Steel Roller Stand - K3119SL (cont.)
Part NumberNominalPipe Size
StructuralChannel Size "A" "B"
K3119SL - 2 to 3 1/2
2" C4 x 5.4 4 3/4" 3 1/16"
2 1/2" C4 x 5.4 4 3/4" 3 5/16"
3" C4 x 5.4 4 3/4" 3 5/8"
3 1/2" C4 x 5.4 4 3/4" 3 7/8"
K3119SL - 4 to 6
4" C5 x 6.7 5 3/4" 4 1/8"
5" C5 x 6.7 5 3/4" 4 11/16"
6" C5 x 6.7 5 3/4" 5 3/16"
K3119SL - 8 to 108" C6 x 8.2 8" 7 3/16"
10" C6 x 8.2 8" 8 1/4"
K3119SL - 12 to 1412" C8 x 11.5 10" 9 13/16"
14" C8 x 11.5 10" 10 7/16"
K3119SL - 16 to 20
16" C8 x 11.5 11" 11 7/8"
18" C8 x 11.5 11" 12 15/16"
20" C8 x 11.5 11" 13 15/16"
K3119SL - 24 24" C8 x 11.5 12" 15 13/16"
K3119SL - 30 30" C10 x 15.3 14 1/2" 19 5/8"
Part Number "C" "D" "E" "F"Diameter
"G"
DesignLoad(Lbs.)
Wt./C(Lbs.)
K3119SL - 2 to 3 1/2
1 15/16" 2 3/4" - 1 3/4" 9/16" 390 314
2 3/16" 2 3/4" - 1 3/4" 9/16" 390 314
2 1/2" 2 3/4" - 1 3/4" 9/16" 390 314
2 3/4" 2 3/4" - 1 3/4" 9/16" 390 314
K3119SL - 4 to 6
2 15/16" 3 3/4" - 2 1/2" 11/16" 950 489
3 1/2" 3 3/4" - 2 1/2" 11/16" 950 489
4" 3 3/4" - 2 1/2" 11/16" 950 489
K3119SL - 8 to 105 3/8" 6" 3" 2 1/2" 13/16" 2100 950
6 7/16" 6" 3" 2 1/2" 13/16" 2100 950
K3119SL - 12 to 147 9/16" 8" 4" 3 5/8" 13/16" 3075 1740
8 3/16" 8" 4" 3 5/8" 13/16" 3075 1740
K3119SL - 16 to 20
9 3/8" 9" 4" 3 1/8" 13/16" 4980 2018
10 7/16" 9" 4" 3 1/8" 13/16" 4980 2018
11 7/16" 9" 4" 3 1/8" 13/16" 4980 2018
K3119SL - 24 13 5/16" 10" 4" 3 1/8" 13/16" 6100 2175
K3119SL - 30 16 5/8" 12 1/2" 6" 4 1/8" 13/16" 7500 3510
108
Roller Chair - K3120
Notes: If using D.I. pipe refer to page 180 for sizing. Non-metallic rollers with hot-dip gal-vanized sockets and stainless steel hardware are available for most sizes. Not for con-tinuous cycling applications
Material: Steel with cast iron rollerStandard Finish: Plain or Electro-PlatedService: Designed for support ofpipe with longitudinal movement.When used with insulated pipe, seeK3160 - K3165 Pipe Covering Pro-tection Saddle charts for propersizing on pages 66-73Ordering: Specify part number andfinish
Part NumberNominalPipe Size "A" "B" "C"
Recommended BoltSize (Not Included)
"D" "E"
DesignLoad(Lbs.)
Wt./C(Lbs.)
K3120 - 2 2" 1 1/4" 4 5/8" 1 1/2" 3/8" - 16 x 1 1/2" 1 9/16" 300 119
K3120 - 2 1/2 2 1/2" 1 1/4" 5 3/8" 1 5/8" 3/8" - 16 x 1 1/2" 1 7/8" 600 146
K3120 - 3 3" 2" 6" 1 3/4" 3/8" - 16 x 1 1/2" 2 3/16" 600 172
K3120 - 3 1/2 3 1/2" 2" 6 3/4" 2 1/16" 3/8" - 16 x 1 1/2" 2 1/2" 600 264
K3120 - 4 4" 2" 7 1/4" 2 5/16" 1/2" - 13 x 1 1/2" 2 3/4" 700 303
K3120 - 5 5" 3" 8 7/16" 2 1/2" 1/2" - 13 x 1 1/2" 3 3/8" 700 401
K3120 - 6 6" 3 1/8" 9 3/4" 2 3/4" 1/2" - 13 x 1 1/2" 3 15/16" 1000 620
K3120 - 8 8" 3 3/8" 12" 3" 5/8" - 11 x 1 1/2" 5 1/16" 1300 874
K3120 - 10 10" 5 1/4" 14 7/16" 3 5/8" 5/8" - 11 x 2" 6 1/4" 1700 1270
K3120 - 12 12" 5 1/2" 16 5/8" 4 1/8" 5/8" - 11 x 2" 7 3/8" 2300 1918
K3120 - 14 14" 6" 18 1/4" 4 5/8" 5/8" - 11 x 2" 8 1/4" 3100 2629
K3120 - 16 16" 8" 21" 5" 5/8" - 11 x 2 1/2" 9 1/4" 3900 3248
K3120 - 18 18" 9" 23" 5 1/4" 5/8" - 11 x 2 1/2" 10 3/8" 4200 4120
K3120 - 20 20" 10" 25" 5 3/4" 3/4" - 10 x 3" 11 1/2" 4500 5630
K3120 - 24 24" 12" 30" 7" 3/4" - 10 x 3" 13 3/4" 6000 7702
109
Adjustable Roller Support - K3122
Part NumberNominalPipe Size
Rod Size"A" "B" "C" "D" "E" "F"
DesignLoad(Lbs.)
Wt./C(Lbs.)
K3122 - 2 2" 3/8" - 16 12" 4 1/8" 2 5/8" 1 9/16" 3/4" 600 194
K3122 - 2 1/2 2 1/2" 1/2" - 13 12" 4 7/8" 3 1/8" 1 7/8" 3/4" 660 284
K3122 - 3 3" 1/2" - 13 12" 5 1/2" 3 3/4" 2 3/16" 3/4" 700 302
K3122 - 3 1/2 3 1/2" 1/2" - 13 12" 6 1/8" 4 1/4" 2 1/2" 3/4" 750 314
K3122 - 4 4" 5/8" - 11 12" 6 3/4" 4 3/4" 2 3/4" 3/4" 750 438
K3122 - 5 5" 5/8" - 11 12" 8 1/16" 5 13/16" 3 3/8" 3/4" 750 495
K3122 - 6 6" 3/4" - 10 12" 9 9/16" 6 7/8" 3 15/16" 1 1/8" 1070 867
K3122 - 8 8" 7/8" - 9 12" 11 15/16" 8 7/8" 5 1/16" 1 1/8" 1350 1176
K3122 - 10 10" 7/8" - 9 12" 14 1/16" 11" 6 1/4" 1 1/8" 1730 1368
K3122 - 12 12" 7/8" - 9 12" 15 13/16" 13" 7 3/8" 1 1/8" 2400 1861
K3122 - 14 14" 1" - 8 12" 17 3/4" 14 1/4" 8 1/4" 1 1/2" 3130 3116
K3122 - 16 16" 1" - 8 18" 19 3/4" 16 1/4" 9 7/16" 1 1/2" 3970 3550
K3122 - 18 18" 1" - 8 18" 21 7/8" 18 1/4" 10 1/2" 1 1/2" 4200 4328
K3122 - 20 20" 1 1/4" - 7 18" 24 1/4" 20 1/4" 11 1/2" 1 1/2" 4550 5241
K3122 - 24 24" 1 1/2" - 6 24" 28 7/8" 24 1/4" 13 13/16" 2" 6160 7773
Notes: If using D.I. pipe refer to page 180 for sizing. Non-metallic rollers with hot-dip gal-vanized sockets and stainless steel hardware are available for most sizes. Not for con-tinuous cycling applications
Material: Steel with cast iron rollerStandard Finish: Plain or Electro-PlatedService: Designed for support of pipe where longi-tudinal movement and vertical adjustments are re-quired. When used with insulated pipe, see K3160 -K3165 Pipe Covering Protection Saddle charts forproper sizing on pages 66-73Ordering: Specify part number and finish
110
Adjustable Double Roller Guide - K3122A
Part NumberNominalPipe Size
Rod Size"A" "B" "C" "D" "E" "F"
DesignLoad(Lbs.)
Wt./C(Lbs.)
K3122A - 2 2" 3/8" - 16 12" 4 1/8" 2 5/8" 1 9/16" 3/4" 600 323
K3122A - 2 1/2 2 1/2" 1/2" - 13 14" 4 7/8" 3 1/8" 1 7/8" 3/4" 660 465
K3122A - 3 3" 1/2" - 13 14" 5 1/2" 3 3/4" 2 3/16" 3/4" 700 501
K3122A - 3 1/2 3 1/2" 1/2" - 13 14" 6 1/8" 4 1/4" 2 1/2" 3/4" 750 525
K3122A - 4 4" 5/8" - 11 18" 6 3/4" 4 3/4" 2 3/4" 3/4" 750 757
K3122A - 5 5" 5/8" - 11 18" 8 1/16" 5 13/16" 3 3/8" 3/4" 750 872
K3122A - 6 6" 3/4" - 10 24" 9 9/16" 6 7/8" 3 15/16" 1 1/8" 1070 1687
K3122A - 8 8" 7/8" - 9 24" 11 15/16" 8 7/8" 5 1/16" 1 1/8" 1350 2277
K3122A - 10 10" 7/8" - 9 30" 14 1/16" 11" 6 1/4" 1 1/8" 1730 2830
K3122A - 12 12" 7/8" - 9 30" 15 13/16" 13" 7 3/8" 1 1/8" 2400 3817
K3122A - 14 14" 1" - 8 36" 17 3/4" 14 1/4" 8 1/4" 1 1/2" 3130 6513
K3122A - 16 16" 1" - 8 36" 19 3/4" 16 1/4" 9 7/16" 1 1/2" 3970 6759
K3122A - 18 18" 1" - 8 42" 21 7/8" 18 1/4" 10 1/2" 1 1/2" 4200 7518
K3122A - 20 20" 1 1/4" - 7 42" 24 1/4" 20 1/4" 11 1/2" 1 1/2" 4550 11222
K3122A - 24 24" 1 1/2" - 6 48" 28 7/8" 24 1/4" 13 13/16" 2" 6160 17666
Notes: If using D.I. pipe refer to page 180 for sizing. Non-metallic rollers with hot-dip gal-vanized sockets and stainless steel hardware are available for most sizes. Not for con-tinuous cycling applications
Material: Steel with cast iron rollerStandard Finish: Plain or Electro-PlatedService: Designed for support of pipe where longi-tudinal movement and vertical adjustments are re-quired. When used with insulated pipe, see K3160 -K3165 Pipe Covering Protection Saddle charts forproper sizing on pages 66-73Ordering: Specify part number and finish
111
Roller Support - K3124
Notes: If using D.I. pipe refer to page 180 for sizing. Non-metallic rollers with hot-dipgalvanized sockets and stainless steel hardware are available for most sizes. Not for con-tinuous cycling applications
Material: Steel with cast iron rollerStandard Finish: Plain or Electro-PlatedService: Designed for support of pipe where longitudinalmovement and vertical adjustments are required. Whenused with insulated pipe, see K3160 - K3165 Pipe CoveringProtection Saddle charts for proper sizing on pages 66-73Ordering: Specify part number and finish
Part NumberNominalPipe Size "A" "B" "C" "D" "E"
Length ofRoller
DesignLoad (Lbs.)
Wt./C(Lbs.)
K3124 - 2 to 3 1/2
2" 5/8" - 11 4 3/4" 1 3/4" 5" 1 13/16" 2 3/4" 390 233
2 1/2" 5/8" - 11 4 3/4" 2 1/8" 5" 1 13/16" 2 3/4" 390 233
3" 5/8" - 11 4 3/4" 2 3/8" 5" 1 13/16" 2 3/4" 390 233
3 1/2" 5/8" - 11 4 3/4" 2 5/8" 5" 1 13/16" 2 3/4" 390 233
K3124 - 4 to 6
4" 3/4" - 10 5 7/8" 2 3/4" 6" 2" 3 3/4" 600 368
5" 3/4" - 10 5 7/8" 3 3/8" 6" 2" 3 3/4" 600 368
6" 3/4" - 10 5 7/8" 4" 6" 2" 3 3/4" 600 368
K3124 - 8 to 108" 7/8" - 9 8 3/4" 5 1/4" 6" 2 11/16" 6" 800 919
10" 7/8" - 9 8 3/4" 6 3/8" 6" 2 11/16" 6" 800 919
K3124 - 12 to 1412" 1" - 8 11 1/4" 7 1/2" 7" 3 1/4" 8" 1300 1660
14" 1" - 8 11 1/4" 8 1/8" 7" 3 1/4" 8" 1300 1660
K3124 - 16 to 20
16" 1 1/8" - 7 12 1/2" 9 3/8" 8" 3 1/2" 9" 2300 2250
18" 1 1/8" - 7 12 1/2" 10 3/8" 8" 3 1/2" 9" 2300 2250
20" 1 1/8" - 7 12 1/2" 11 3/8" 8" 3 1/2" 9" 2300 2250
112
Roller Support - K3126
Notes: If using D.I. pipe refer to page 180 for sizing. Non-metallic rollers with hot-dipgalvanized sockets and stainless steel hardware are available for most sizes. Not forcontinuous cycling applications
Material: Steel with cast iron rollerStandard Finish: Plain or Electro-PlatedService: Designed to mount on strut (metalframing) for the support of pipe with longi-tudinal movement. When used with insu-lated pipe, see K3160 - K3165 Pipe CoveringProtection Saddle charts for proper sizingon pages 66-73Ordering: Specify part number and finish
Part NumberNominalPipe Size "A" "B" "C" "D" "E"
Design Load(Lbs.)
Wt./C(Lbs.)
K3126 - 2 to 3 1/2
2" 1 7/16" 6" 3 11/16" 7 5/8" 9/16" 390 177
2 1/2" 1 7/16" 6" 3 27/64" 7 5/8" 9/16" 390 177
3" 1 7/16" 6" 3 47/64" 7 5/8" 9/16" 390 177
3 1/2" 1 7/16" 6" 3 63/64" 7 5/8" 9/16" 390 177
K3126 - 4 to 6
4" 1 7/16" 7" 4 13/64" 8 5/8" 9/16" 600 231
5" 1 7/16" 7" 4 47/64" 8 5/8" 9/16" 600 231
6" 1 7/16" 7" 5 17/64" 8 5/8" 9/16" 600 231
K3126 - 8 to 108" 1 13/16" 8 3/4" 7" 10 3/8" 9/16" 800 542
10" 1 13/16" 8 3/4" 8 1/16" 10 3/8" 9/16" 800 542
K3126 - 12 to 1412" 2 7/16" 12 1/8" 9 27/32" 14 3/8" 13/16" 1300 1040
14" 2 7/16" 12 1/8" 10 15/32" 14 3/8" 13/16" 1300 1040
K3126 - 16 to 20
16" 2 5/8" 13 1/8" 11 7/8" 15 3/8" 13/16" 2300 1508
18" 2 5/8" 13 1/8" 12 7/8" 15 3/8" 13/16" 2300 1508
20" 2 5/8" 13 1/8" 13 7/8" 15 3/8" 13/16" 2300 1508
113
Spring Cushion Hanger - K3264
Part NumberRod Size
"A"Free Height
"C" "D"Spring Deflection Per
Spring (Lbs./in.)
Maximum Load at1" Deflection - 2
Springs (Lbs.)Wt./CPR
(Lbs.)
K3264 - 1 3/8" - 16 3" 1 1/16" 30 78 100
K3264 - 5 3/4" - 10 4 5/8" 2 5/16" 707 1500 400
K3264 - 6 1" - 8 4 7/8" 3 1/4" 1600 3200 700
Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for use with K3114 as a cushionspring for a piping system where vertical movementdoes not exceed 1 1/4”Ordering: Specify part number, size and finish
Note: Includes 2 springs and 4 cup washers
Pipe supports presented in this section are designed to support pipe from a basestructure where vertical adjustments may be necessary. Pipe guides and slides aredesigned to allow longitudinal movement due to thermal expansion and contractionof pipe. Protection shields and saddles are designed to prevent damage to pipe in-sulation.Materials: Carbon Steel is used in the manufacturing of pipe supports, guides,shields and saddles. Stainless Steel and other materials are also available.Finishes: Finishes for pipe supports in this section are Plain Steel, Electro-PlatedZinc, Hot Dipped Galvanized, Red Primer and other special coatings are also avail-able.Notes: All hangers in this section are sized to fit schedule 40/80 pipe unless other-wise noted. Some steel items may be specially fabricated to accommodate otherpipe diameters. Products in this section are designed and manufactured in accor-dance with industry standards. RHK is not responsible for injuries and damagewhich could result from improper and negligent installation of the items.
Supports, Guides,Shields andSaddles
51
Base Stand - K3088
Part Number Stand Pipe Size Plate Size "A" Diameter "H" Wt./C* (Lbs.)
K3088 - 3/4 3/4" 1/4" x 6" x 6" 7/8" 3/4" 420
K3088 - 1 1" 1/4" x 6" x 6" 7/8" 3/4" 480
K3088 - 1 1/4 1 1/4" 1/4" x 6" x 6" 7/8" 3/4" 590
K3088 - 1 1/2 1 1/2" 1/4" x 6" x 6" 7/8" 3/4" 655
K3088 - 2 2" 1/4" x 6" x 6" 7/8" 3/4" 1211
K3088 - 2 1/2 2 1/2" 3/8" x 8" x 8" 1 1/4" 13/16" 2376
K3088 - 3/4 3" 3/8" x 12" x 12" 1 1/2" 13/16" 3137
K3088 - 4 4" 1/2" x 12" x 12" 1 1/2" 15/16" 4338
K3088 - 6 6" 1/2" x 18" x 18" 1 1/2" 1 1/8" 7378
Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed as an unthreaded base stand for Pipe Sup-ports K3090, K3095, K3094 and K3096Ordering: Specify part number, height and finish
Note: Match K3088 part number with dimension “D” from K3090, K3095 or K3096 charts
52
Seismic Base Stand - K3088S
Part NumberStand Pipe
Size Plate Size "A"Diameter
"H"Wt./C*(Lbs.)
K3088S - 3/4 3/4" 1/4" x 8" x 8" 1" 9/16" 618
K3088S - 1 1" 1/4" x 8" x 8" 1" 9/16" 708
K3088S - 1 1/4 1 1/4" 1/4" x 8" x 8" 1" 9/16" 798
K3088S - 1 1/2 1 1/2" 1/4" x 8" x 8" 1" 9/16" 858
K3088S - 2 2" 1/4" x 8" x 8" 1" 9/16" 993
K3088S - 2 1/2 2 1/2" 3/8" x 8 1/2" x 8 1/2" 1 1/4" 9/16" 1638
K3088S - 4 4" 1/2" x 13 1/2" x 13 1/2" 1 1/2" 15/16" 4202
Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed as an unthreaded base stand for Pipe Supports K3090, K3095,K3094 and K3096. Designed to meet requirements of 12X anchor diameter holespacing for seismic applications. The standard K3088-3 and K3088-6 alreadymeet this requirementOrdering: Specify part number, height and finish
Note: Match K3088 part number with dimension “D” from K3090, K3095 or K3096 charts.Wt./C* based on a height of 18”
53
Threaded Seismic Base Stand - K3088ST
Part NumberStand Pipe
Size Plate Size "A"Diameter
"H" "TL"Wt./C*(Lbs.)
K3088ST - 1 1" 1/4" x 8" x 8" 1" 9/16" 1 1/2" 708
K3088ST - 1 1/4 1 1/4" 1/4" x 8" x 8" 1" 9/16" 1 1/2" 798
K3088ST - 1 1/2 1 1/2" 1/4" x 8" x 8" 1" 9/16" 1 1/2" 858
K3088ST - 2 2" 1/4" x 8" x 8" 1" 9/16" 1 1/2" 993
K3088ST - 2 1/2 2 1/2" 3/8" x 8 1/2" x 8 1/2" 1 1/4" 9/16" 1 1/2" 1638
K3088ST - 4 4" 1/2" x 13 1/2" x 13 1/2" 1 1/2" 15/16" 2" 4202
Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed as a threaded base stand for Pipe Supports K3089, K3091, K3092,K3093 and K3097. Designed to meet requirements of 12X anchor diameter holespacing for seismic applications. The standard K3088T-3 and K3088T-6 alreadymeet this requirementOrdering: Specify part number, height and finish
Note: Match K3088T part number with dimension “D” from K3089, K3092 and K3093 charts.Wt./C* based on a height of 18”
54
Threaded Base Stand - K3088T
Part NumberStand Pipe
Size Plate Size "A"Diameter
"H" "TL"Wt./C*(Lbs.)
K3088T - 1 1" 1/4" x 6" x 6" 7/8" 3/4" 1 1/2" 495
K3088T - 1 1/4 1 1/4" 1/4" x 6" x 6" 7/8" 3/4" 1 1/2" 583
K3088T - 1 1/2 1 1/2" 1/4" x 6" x 6" 7/8" 3/4" 1 1/2" 649
K3088T - 2 2" 1/4" x 6" x 6" 7/8" 3/4" 1 1/2" 785
K3088T - 2 1/2 2 1/2" 3/8" x 8" x 8" 1 1/4" 13/16" 1 1/2" 1524
K3088T - 3 3" 3/8" x 12" x 12" 1 1/2" 13/16" 1 1/2" 2624
K3088T - 4 4" 1/2" x 12" x 12" 1 1/2" 15/16" 2" 3594
K3088T - 6 6" 1/2" x 18" x 18" 1 1/2" 1 1/8" 2" 7346
Materials: SteelStandard Finish: Plain or Electro-PlatedService: Designed as a threaded base stand for Pipe Supports K3089,K3091, K3092, K3093 and K3097Ordering: Specify part number, height and finish
Note: Match K3088T part number with dimension “D” from K3089, K3092 and K3093charts. Wt./C* based on a height of 18”
55
Pipe Adjuster - K3089
Part Number
To SupportNominalPipe Size "B"
"C" WhenUsed with
K3090Minumum
"C" WhenUsed with
K3090Maximum
"C" WhenUsed with
K3095Minimum
"C" WhenUsed with
K3095Maximum
"D" (NotSupplied)
Wt./C(Lbs.)
K3089 - 3/41 1/2"
3/4"6 1/4" 10 3/4" 6" 10 1/2"
1 1/2" 1402" 6 7/16" 10 15/16" 6 3/16" 10 11/16"
K3089 - 1 1/2
2 1/2"
1 1/2"
8 3/8" 12 7/8" 7 15/16" 12 7/16"
2 1/2" 4003" 8 11/16" 13 3/16" 8 1/8" 12 5/8"
3 1/2" 8 15/16" 13 7/16" 8 3/8" 12 7/8"
K3089 - 2 1/2
4"
2 1/2"
9 15/16" 14 7/16" 9 7/16" 13 15/16"
3" 700
5" 10 1/4" 14 3/4" 9 3/4" 14 1/4"
6" 11 3/16" 15 11/16" 10 7/16" 14 15/16"
8" 12 11/16" 17 3/16" 12 3/8" 16 7/8"
10" 13 11/16" 18 3/16" 13 7/16" 17 15/16"
12" 14 7/8" 19 3/8" 14 7/16" 18 15/16"
K3089 - 314"
3"18" 22 1/2" 18 3/16" 22 11/16"
4" 100016" 19" 23 1/2" 19 3/16" 23 11/16"
K3089 - 4
18"
4"
21 9/16" 26 1/16" 21 1/2" 26"
6" 2200
20" 22 9/16" 27 1/16" 22 1/2" 27"
24" 24 9/16" 29 1/16" 25 3/4" 30 1/4"
30" 28 11/16" 33 3/16" 28 7/8" 33 3/8"
36" 31 11/16" 36 3/16" 31 7/8" 36 3/8"
Material: Steel Pipe/MalleableIron ReducerStandard Finish: Plain or Electro-PlatedService: Designed to provide upto 4 1/2” vertical adjustmentafter pipe installation. For usewith K3090, K3094 and K3095Pipe Saddle Supports andK3088T or K3088ST ThreadedBase StandsOrdering: Specify part numberand finish
56
Pipe Support with U-Bolt - K3090
Part NumberNominalPipe Size
MaximumO.D. of
Pipe Steel Size "A" "B" "C"
"D" (BaseStand NotIncluded)
Wt./C(Lbs.)
K3090 - 3/4 3/4" 1 3/8" 1/4" x 1 1/2" 1/4" 3/4" 2" 3/4" 107
K3090 - 1 1" 1 3/8" 1/4" x 1 1/2" 1/4" 3/4" 2 5/32" 3/4" 117
K3090 - 1 1/4 1 1/4" 1 11/16" 1/4" x 2" 3/8" 3/4" 2 21/64" 3/4" 149
K3090 - 1 1/2 1 1/2" 2" 1/4" x 2" 3/8" 3/4" 2 1/2" 3/4" 166
K3090 - 2 2" 2 7/16" 1/4" x 2" 3/8" 3/4" 2 11/16" 3/4" 186
K3090 - 2 1/2 2 1/2" 2 7/8" 1/4" x 3" 1/2" 1 5/16" 3 1/8" 1 1/2" 251
K3090 - 3 3" 3 1/2" 1/4" x 3" 1/2" 1 5/16" 3 7/16" 1 1/2" 316
K3090 - 3 1/2 3 1/2" 4" 1/4" x 3" 1/2" 1 5/16" 3 11/16" 1 1/2" 317
K3090 - 4 4" 4 7/8" 3/8" x 3 1/2" 1/2" 2 3/8" 4 1/16" 2 1/2" 586
K3090 - 5 5" 5 5/8" 3/8" x 3 1/2" 1/2" 2 3/8" 4 17/32" 2 1/2" 621
K3090 - 6 6" 6 29/32" 1/2" x 3 1/2" 5/8" 2 3/8" 5 5/16" 2 1/2" 895
K3090 - 8 8" 9 1/8" 1/2" x 3 1/2" 5/8" 2 3/8" 6 3/4" 2 1/2" 1115
K3090 - 10 10" 11 3/32" 1/2" x 3 1/2" 3/4" 2 3/8" 7 13/16" 2 1/2" 1423
K3090 - 12 12" 13 3/16" 1/2" x 3 1/2" 7/8" 2 3/8" 8 13/16" 2 1/2" 1846
K3090 - 14 14" 14" 5/8" x 4" 7/8" 2 7/8" 10 9/16" 3" 2593
K3090 - 16 16" 16" 5/8" x 4" 7/8" 2 7/8" 11 9/16" 3" 2825
K3090 - 18 18" 18" 3/4" x 5" 1" 2 7/8" 13 9/16" 4" 4843
K3090 - 20 20" 20" 3/4" x 5" 1" 4" 14 9/16" 4" 5225
K3090 - 24 24" 24" 1" x 5" 1" 4" 16 9/16" 4" 6970
K3090 - 30 30" 30" 1" x 5" 1" 4" 20 11/16" 4" 8587
K3090 - 36 36" 36" 1" x 5" 1" 4" 23 11/16" 4" 9977
Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for support ofhorizontal pipe from floor. U-Boltand Hex Nuts are provided to holdpipe securely to the saddle. Usewith K3088 or K3088S Base StandsOrdering: Specify part numberand finish
Note: 4” to 12” fits both steel and ductile iron pipe. For other ductile iron pipe sizesspecify K3090DI-Size. 3” Ductile iron uses K3090-3 1/2
K3090 - 8 or larger
57
Pipe Saddle Support - K3091
Part NumberNominalPipe Size
MaximumO.D. of Pipe "A" Steel Size
Nominal PipeCoupling "D" Wt./C (Lbs.)
K3091 - 3/4 3/4" 1 1/8" 2 23/32" 7 Ga x 1 3/4" 1" 51
K3091 - 1 1" 1 3/8" 2 27/32" 7 Ga x 1 3/4" 1" 53
K3091 - 1 1/4 1 1/4" 1 11/16" 3 1/64" 7 Ga x 1 3/4" 1" 56
K3091 - 1 1/2 1 1/2" 2" 3 1/4" 1/4" x 2" 1 1/4" 84
K3091 - 2 2" 2 3/8" 3 5/8" 3/8" x 2" 1 1/4" 112
K3091 - 2 1/2 2 1/2" 2 7/8" 3 7/8" 3/8" x 2 1/2" 1 1/2" 162
K3091 - 3 3" 3 1/2" 4 3/16" 3/8" x 2 1/2" 1 1/2" 179
K3091 - 3 1/2 3 1/2" 4" 4 7/16" 3/8" x 2 1/2" 1 1/2" 193
K3091 - 4 4" 4 13/16" 4 3/4" 3/8" x 3" 2" 273
K3091 - 5 5" 5 9/16" 5 9/32" 3/8" x 3" 2" 309
K3091 - 6 6" 6 29/32" 6 15/16" 1/2" x 3 1/2" 2 1/2" 586
K3091 - 8 8" 9 1/16" 7 15/16" 1/2" x 3 1/2" 2 1/2" 688
K3091 - 10 10" 11 1/8" 9 1/8" 1/2" x 4" 3" 1011
K3091 - 12 12" 13 1/4" 10 1/8" 1/2" x 4" 3" 1128
K3091 - 14 14" 14" 11" 1/2" x 5" 4" 1532
K3091 - 16 16" 16" 12" 1/2" x 5" 4" 1680
K3091 - 18 18" 18" 13 1/2" 1/2" x 7 1/2" 6" 3179
K3091 - 20 20" 20" 14 1/2" 1/2" x 7 1/2" 6" 3401
K3091 - 24 24" 24" 16 1/2" 1/2" x 7 1/2" 6" 3846
Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for support of horizon-tal pipe from floor where there is mini-mal space between pipe and floor. Usewith K3088T Threaded Base StandOrdering: Specify part number and finish
Notes: 4” thru 12” fits both steel and ductile iron pipe. For other ductile iron pipe sizesspecify K3091DI-size. 3” Ductile Iron uses K3091-3 1/2
58
Adj. Pipe Saddle Support w/Yoke - K3092...
Part NumberNominalPipe Size
Maximum O.D. ofPipe Saddle Steel Size "A" "B" Minimum
K3092 - 3/4 3/4" 1 3/8" 1/4" x 1 1/2" 3/4" 5 3/4"
K3092 - 1 1" 1 3/8" 1/4" x 1 1/2" 3/4" 5 29/32"
K3092 - 1 1/4 1 1/4" 1 11/16" 1/4" x 2" 3/4" 6 5/64"
K3092 - 1 1/2 1 1/2" 2" 1/4" x 2" 3/4" 6 1/4"
K3092 - 2 2" 2 7/16" 1/4" x 2" 3/4" 6 7/16"
K3092 - 2 1/2 2 1/2" 2 7/8" 1/4" x 3" 1 1/2" 6 7/8"
K3092 - 3 3" 3 1/2" 1/4" x 3" 1 1/2" 7 3/16"
K3092 - 3 1/2 3 1/2" 4" 1/4" x 3" 1 1/2" 7 7/16"
K3092 - 4 4" 4 7/8" 3/8" x 3 1/2" 2 1/2" 7 13/16"
K3092 - 5 5" 5 5/8" 3/8" x 3 1/2" 2 1/2" 8 9/32"
K3092 - 6 6" 6 29/32" 1/2" x 3 1/2" 2 1/2" 9 1/16"
K3092 - 8 8" 9 1/8" 1/2" x 3 1/2" 2 1/2" 10 1/2"
K3092 - 10 10" 11 3/32" 1/2" x 3 1/2" 2 1/2" 11 9/16"
K3092 - 12 12" 13 3/16" 1/2" x 3 1/2" 2 1/2" 12 9/16"
K3092 - 14 14" 14" 5/8" x 4" 3" 14 5/16"
K3092 - 16 16" 16" 5/8" x 4" 3" 15 5/16"
K3092 - 18 18" 18" 3/4" x 5" 4" 17 5/16"
K3092 - 20 20" 20" 3/4" x 5" 4" 18 5/16"
K3092 - 24 24" 24" 1" x 5" 4" 20 5/16"
K3092 - 30 30" 30" 1" x 5" 4" 24 7/16"
K3092 - 36 36" 36" 1" x 5" 4" 27 7/16"
Note: 4” to 12” fits both steel and ductile iron pipe. For other ductile iron pipesizes specify K3090DI-size. 3” Ductile iron uses K3090-3 1/2
59
Adj. Pipe Saddle Support w/Yoke - K3092 (cont.)
Part Number "B" Maximum "C""D" (Base Stand
Not Supplied) "E" Wt./C (Lbs.)
K3092 - 3/4 10 1/4" 2" 1 1/2" 1/4" 247
K3092 - 1 10 13/32" 2 5/32" 1 1/2" 1/4" 257
K3092 - 1 1/4 10 37/64" 2 21/64" 1 1/2" 3/8" 289
K3092 - 1 1/2 10 3/4" 2 1/2" 1 1/2" 3/8" 306
K3092 - 2 10 15/16" 2 11/16" 1 1/2" 3/8" 326
K3092 - 2 1/2 11 3/8" 3 1/8" 2 1/2" 1/2" 651
K3092 - 3 11 11/16" 3 7/16" 2 1/2" 1/2" 716
K3092 - 3 1/2 11 15/16" 3 11/16" 2 1/2" 1/2" 717
K3092 - 4 12 5/16" 4 1/4" 3" 1/2" 1286
K3092 - 5 12 25/32" 4 9/16" 3" 1/2" 1321
K3092 - 6 13 9/16" 5 1/2" 3" 5/8" 1595
K3092 - 8 15" 7" 3" 5/8" 1815
K3092 - 10 16 1/16" 8" 3" 3/4" 2123
K3092 - 12 17 1/16" 9 3/16" 3" 7/8" 2546
K3092 - 14 18 13/16" 10 9/16" 4" 7/8" 3593
K3092 - 16 19 13/16" 11 9/16" 4" 7/8" 3825
K3092 - 18 21 13/16" 13 9/16" 6" 1" 7043
K3092 - 20 22 13/16" 14 9/16" 6" 1" 7425
K3092 - 24 24 13/16" 16 9/16" 6" 1" 9170
K3092 - 30 28 15/16" 20 11/16" 6" 1" 10787
K3092 - 36 31 15/16" 23 11/16" 6" 1" 12177
Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for support of horizontal pipe fromfloor where vertical adjustment is required. U-Bolt andHex Nuts are provided to hold pipe securely to the sad-dle. Use with K3088T Threaded Base StandOrdering: Specify part number and finish
60
Adj. Pipe Saddle Support w/Reducer - K3093...
Part NumberNominal Pipe
SizeMaximum O.D.
of Pipe Saddle Steel Size "A" "B" Minimum
K3093 - 1 1" 1 5/16" 1/4" x 1 3/4" 3/4" 5 21/32"
K3093 - 1 1/4 1 1/4" 1 11/16" 1/4" x 1 3/4" 3/4" 5 53/64"
K3093 - 1 1/2 1 1/2" 1 29/32" 1/4" x 1 3/4" 3/4" 6"
K3093 - 2 2" 2 3/8" 1/4" x 1 3/4" 3/4" 6 3/16"
K3093 - 2 1/2 2 1/2" 2 7/8" 1/4" x 3" 1 1/2" 6 5/16"
K3093 - 3 3" 3 1/2" 1/4" x 3" 1 1/2" 6 5/8"
K3093 - 3 1/2 3 1/2" 4" 1/4" x 3" 1 1/2" 6 7/8"
K3093 - 4 4" 4 7/8" 1/4" x 4" 2 1/2" 7 1/4"
K3093 - 5 5" 5 9/16" 1/4" x 4" 2 1/2" 7 25/32"
K3093 - 6 6" 7" 3/8" x 4" 2 1/2" 8 7/16"
K3093 - 8 8" 9 1/8" 3/8" x 4" 2 1/2" 10 1/4"
K3093 - 10 10" 11 1/8" 3/8" x 4" 2 1/2" 11 5/16"
K3093 - 12 12" 13 1/2" 3/8" x 4" 2 1/2" 12 1/8"
K3093 - 14 14" 14" 3/8" x 5" 3" 14 1/2"
K3093 - 16 16" 16" 3/8" x 5" 3" 15 1/2"
K3093 - 18 18" 18" 1/2" x 5" 4" 17 1/4"
K3093 - 20 20" 20" 1/2" x 5" 4" 18 1/4"
K3093 - 24 24" 24" 1/2" x 6" 4" 21 1/2"
K3093 - 30 30" 30" 1" x 6" 4" 24 5/8"
K3093 - 36 36" 36" 1" x 6" 4" 27 5/8"
Note: 4” to 12” fits both steel and ductile iron pipe. For other ductileiron pipe sizes specify K3090DI-size. 3” Ductile iron uses K3090-3 1/2
61
Adj. Pipe Saddle Support w/Reducer - K3093 (cont.)
Part Number "B" Maximum "C""D" (Base Stand
Not Included)Wt./C Complete
(Lbs.)Wt./C Saddle
Only (Lbs.)
K3093 - 1 10 5/32" 1 29/32" 1 1/2" 189 49
K3093 - 1 1/4 10 21/64" 2 5/64" 1 1/2" 221 81
K3093 - 1 1/2 10 1/2" 2 1/4" 1 1/2" 228 88
K3093 - 2 10 11/16" 2 7/16" 1 1/2" 234 94
K3093 - 2 1/2 10 13/16" 2 9/16" 2 1/2" 567 167
K3093 - 3 11 1/8" 2 7/8" 2 1/2" 576 176
K3093 - 3 1/2 11 3/8" 3 1/8" 2 1/2" 588 188
K3093 - 4 11 3/4" 3 1/2" 3" 1064 364
K3093 - 5 12 9/32" 4 1/32" 3" 1081 381
K3093 - 6 12 15/16" 4 11/16" 3" 1234 534
K3093 - 8 14 3/4" 6 1/2" 3" 1496 796
K3093 - 10 15 13/16" 7 9/16" 3" 1614 914
K3093 - 12 16 5/8" 8 3/8" 3" 1768 1068
K3093 - 14 19" 10 3/4" 4" 2654 1654
K3093 - 16 20" 11 3/4" 4" 2817 1817
K3093 - 18 21 3/4" 13 1/2" 6" 4998 2798
K3093 - 20 22 3/4" 14 1/2" 6" 5218 3018
K3093 - 24 26" 17 3/4" 6" 6346 4146
K3093 - 30 29 1/8" 20 7/8" 6" 9824 7624
K3093 - 36 32 1/8" 23 7/8" 6" 11077 8877
Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for support of horizontal pipe fromfloor stanchions where vertical adjustment is required.Use with K3088T Threaded Base StandsOrdering: Specify part number and finish
62
Pipe Saddle Support - K3095
Part NumberNominalPipe Size
MaximumO.D. of
Pipe Steel Size "A" "B" "C"
"D" (BaseStand NotIncluded) "E"
Wt./C(Lbs.)
K3095 - 1 1" 1 5/16" 1/4" x 1 3/4" 3" 1/2" 1 29/32" 3/4" 1 1/8" 49
K3095 - 1 1/4 1 1/4" 1 11/16" 1/4" x 1 3/4" 3" 3/4" 2 5/64" 3/4" 1 7/16" 81
K3095 - 1 1/2 1 1/2" 1 29/32" 1/4" x 1 3/4" 3" 3/4" 2 1/4" 3/4" 1 21/32" 88
K3095 - 2 2" 2 3/8" 1/4" x 1 3/4" 3" 3/4" 2 7/16" 3/4" 2 1/16" 94
K3095 - 2 1/2 2 1/2" 2 7/8" 1/4" x 3" 4" 1 5/16" 2 9/16" 1 1/2" 2 1/2" 167
K3095 - 3 3" 3 1/2" 1/4" x 3" 4" 1 5/16" 2 7/8" 1 1/2" 3 1/32" 176
K3095 - 3 1/2 3 1/2" 4" 1/4" x 3" 4" 1 5/16" 3 1/8" 1 1/2" 3 7/16" 188
K3095 - 4 4" 4 7/8" 1/4" x 4" 4" 2 3/8" 3 1/2" 2 1/2" 4 1/4" 364
K3095 - 5 5" 5 9/16" 1/4" x 4" 4" 2 3/8" 4 1/32" 2 1/2" 4 13/16" 381
K3095 - 6 6" 7" 3/8" x 4" 4" 2 3/8" 4 11/16" 2 1/2" 6 1/16" 534
K3095 - 8 8" 9 1/8" 3/8" x 4" 4" 2 3/8" 6 1/2" 2 1/2" 7 15/16" 796
K3095 - 10 10" 11 1/8" 3/8" x 4" 4" 2 3/8" 7 9/16" 2 1/2" 9 5/8" 914
K3095 - 12 12" 13 1/2" 3/8" x 4" 4" 2 3/8" 8 3/8" 2 1/2" 11 11/16" 1068
K3095 - 14 14" 14" 3/8" x 5" 4" 2 7/8" 10 3/4" 3" 12 1/8" 1654
K3095 - 16 16" 16" 3/8" x 5" 4" 2 7/8" 11 3/4" 3" 13 7/8" 1817
K3095 - 18 18" 18" 1/2" x 5" 4" 3 1/2" 13 1/2" 4" 15 19/32" 2798
K3095 - 20 20" 20" 1/2" x 5" 4" 3 1/2" 14 1/2" 4" 17 5/16" 3018
K3095 - 24 24" 24" 1/2" x 6" 4" 3 1/2" 17 3/4" 4" 20 25/32" 4146
K3095 - 30 30" 30" 1" x 6" 4" 3 1/2" 20 7/8" 4" 26" 7624
K3095 - 36 36" 36" 1" x 6" 4" 3 1/2" 23 7/8" 4" 31 3/16" 8877
Note: 4” to 12” fits both steel and ductile iron pipe. For other ductile iron pipesizes specify K3090DI-size. 3” Ductile iron uses K3090-3 1/2
Material: SteelStandard Finish: Plain orElectro-PlatedService: Designed for sup-port of horizontal pipe fromfloor. Use with K3088 orK3088S Base StandsOrdering: Specify part num-ber and finish
63
Adjustable Pipe Saddle Support - K3096
Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for support of horizontal pipe from floor stanchions (K3088 orK3088S) where vertical adjustment is requiredOrdering: Specify part number and finish
Part NumberNominalPipe Size
MaximumO.D. of Pipe Thread Size "A"
"D" (Base StandNot Included) Wt./C (Lbs.)
K3096 - 2 2" 2 3/8" 7/8" - 9 1" 212
K3096 - 3 3" 3 1/2" 7/8" - 9 1" 259
K3096 - 4 4" 4 1/2" 1" - 8 1" 370
K3096 - 5 5" 5 9/16" 1" - 8 1" 404
K3096 - 6 6" 6 5/8" 1 1/4" - 7 1 1/4" 714
K3096 - 8 8" 8 5/8" 1 1/4" - 7 1 1/4" 819
K3096 - 10 10" 10 3/4" 1 1/2" - 6 1 1/2" 1194
K3096 - 12 12" 12 3/4" 1 1/2" - 6 1 1/2" 1315
64
Pipe Saddle Support with U-Bolt - K3097
Part NumberNominalPipe Size "A" Steel Size Pipe Coupling
U-Bolt ThreadSize Wt./C (Lbs.)
K3097 - 2 1/2 2 1/2" 3 3/4" 1/4" x 3" 1 1/2" 1/2" - 13 303
K3097 - 3 3" 4 1/16" 1/4" x 3" 1 1/2" 1/2" - 13 303
K3097 - 3 1/2 3 1/2" 4 5/16" 1/4" x 3" 1 1/2" 1/2" - 13 351
K3097 - 4 4" 4 3/4" 3/8" x 3 1/2" 2" 1/2" - 13 504
K3097 - 5 5" 5 9/32" 3/8" x 3 1/2" 2" 1/2" - 13 551
K3097 - 6 6" 6 15/16" 1/2" x 3 1/2" 2 1/2" 5/8" - 11 978
K3097 - 8 8" 7 15/16" 1/2" x 3 1/2" 2 1/2" 5/8" - 11 1143
K3097 - 10 10" 9 1/8" 1/2" x 4" 3" 3/4" - 10 1724
K3097 - 12 12" 10 1/8" 1/2" x 4" 3" 7/8" - 9 2156
K3097 - 14 14" 11 1/8" 5/8" x 5" 4" 7/8" - 9 3217
K3097 - 16 16" 12 1/8" 5/8" x 5" 4" 7/8" - 9 3494
K3097 - 18 18" 13 3/4" 3/4" x 7 1/2" 6" 1" - 8 7067
K3097 - 20 20" 14 3/4" 3/4" x 7 1/2" 6" 1" - 8 7399
K3097 - 24 24" 16 3/4" 3/4" x 7 1/2" 6" 1" - 8 8318
Sch 40/80
Ductile Iron
Part NumberDuctile
Iron "A" Steel Size Pipe CouplingU-Bolt Thread
SizeWt./C(Lbs.)
K3097 - 3 1/2 3" 4 19/64" 1/4" x 3" 1 1/2" 1/2" - 13 351
K3097 - 4 4" 4 29/32" 3/8" x 3 1/2" 2" 1/2" - 13 504
K3097 - 6 6" 7 5/64" 1/2" x 3 1/2" 2 1/2" 5/8" - 11 978
K3097 - 8 8" 8 5/32" 1/2" x 3 1/2" 2 1/2" 5/8" - 11 1143
K3097 - 10 10" 9 19/64" 1/2" x 4" 3" 3/4" - 10 1724
K3097 - 12 12" 10 11/32" 1/2" x 4" 3" 7/8" - 9 2156
Material: SteelStandard Finish: Electro-PlatedService: Designed for support ofhorizontal pipe from floor wherethere is minimal space betweenpipe and floor. U-Bolt holds pipesecurity to support. Use withK3088T Threaded Base StandOrdering: Specify part numberand finish
65
Insulation Protection Shield - K3151
Part Number Hanger Size "L"1 "L"2 Shield "I.D."
K3151 - 1 1/2 1 1/2" 10" 12" 1.9
K3151 - 2 2" 10" 12" 2.38
K3151 - 2 1/2 2 1/2" 10" 12" 2.88
K3151 - 3 3" 10" 12" 3.5
K3151 - 3 1/2 3 1/2" 10" 12" 4
K3151 - 4 4" 10" 12" 4.5
K3151 - 5 5" 10" 12" 5.56
K3151 - 6 6" 10" 12" 6.64
K3151 - 8 8" 10" 12" 8.64
K3151 - 10 10" 10" 12" 10.76
K3151 - 12 12" 12" - 12.76
K3151 - 14 14" 12" - 14
K3151 - 16 16" 12" - 16
K3151 - 18 18" 18" - 18
K3151 - 20 20" 18" - 20
K3151 - 24 24" 18" - 24
Material: Steel (Stainless Steel available)Standard Finish: Pre- GalvanizedService: Designed to protect pipe insula-tion when used with hangersOrdering: Specify part number and finish
66
Pipe Covering Protection Saddle - K3160-K3165...
Size for Roller Part Number
Part NumberNominalPipe Size
K3114;K3120;K3122;K3122A
K3117SL;K3118SL;K3119SL;
K3124; K3126 K3110
DesignLoad(Lbs.) Wt./C (Lbs.)
K3160 - 3/4
3/4"
2” 2” to 3 1/2” 2 1/2” 1200 122
K3161 - 3/4 3” 2” to 3 1/2” 3 1/2” 1200 228
K3162 - 3/4 4” 2” to 3 1/2” 5” 1200 297
K3160 - 1
1"
2 1/2” 2” to 3 1/2” 3” 1200 156
K3161 - 1 3” 2” to 3 1/2” 4” 1200 228
K3162 - 1 4” 2” to 3 1/2” 5” 1200 297
K3160 - 1 1/4
1 1/4"
2 1/2” 2” to 3 1/2” 3” 1200 156
K3161 - 1 1/4 3 1/2” 2” to 3 1/2” 5” 1200 228
K3162 - 1 1/4 4” 2” to 3 1/2” 5” 1200 297
K3163 - 1 1/4 5” 4” to 6” 6” 1200 342
K3160 - 1 1/2
1 1/2"
3” 2” to 3 1/2” 3 1/2” 1200 172
K3161 - 1 1/2 3 1/2” 2” to 3 1/2” 5” 1200 239
K3162 - 1 1/2 5” 4” to 6” 6” 1800 311
K3163 - 1 1/2 6” 4” to 6” 8” 1800 417
K3160 - 2
2"
3 1/2” 2” to 3 1/2” 4” 1200 172
K3161 - 2 4” 2” to 3 1/2” 5” 1200 239
K3162 - 2 5” 4” to 6” 6” 1800 311
K3163 - 2 6” 4” to 6” 8” 1800 417
K3164 - 2 8” 4” to 6” 8” 1800 441
K3160 - 2 1/2
2 1/2"
3 1/2” 2” to 3 1/2” 5” 1200 210
K3161 - 2 1/2 5” 4” to 6” 6” 1200 268
K3162 - 2 1/2 6” 4” to 6” 8” 1800 358
K3163 - 2 1/2 8” 4” to 6” 8” 1800 417
K3164 - 2 1/2 8” 4” to 6” 10” 1800 459
InsulationThickness
PartNumber
1" K3160
1 1/2" K3161
2" K3162
2 1/2" K3163
3" K3164
4" K3165
67
Pipe Covering Protection Saddle (cont.)
Part Number
Centerline of Pipe to Centerline of Roll
"A" K3114;K3120; K3122;
K3122A
"B" K3117SL;K3118SL;K3119SL;
K3124; K3126"A"
K3110
Centerline ofPipe to Outsideof Saddle "C"
Thickness ofCovering
(Per ASTM C585)
K3160 - 3/4 2" 2 1/4" 2" 1 9/16" 7/8"
K3161 - 3/4 2 7/16" 2 7/8" 2 3/8" 2 3/16" 1 1/2"
K3162 - 3/4 3 5/16" 3 7/16" 3 3/8" 2 3/4" 1 15/16"
K3160 - 1 2 5/16" 2 1/2" 2 5/16" 1 13/16" 1 1/16"
K3161 - 1 2 7/8" 3" 2 7/8" 2 5/16" 1 9/16"
K3162 - 1 3 7/16" 3 5/8" 3 1/2" 2 7/8" 2 1/8"
K3160 - 1 1/4 2 9/16" 2 11/16" 2 1/2" 2" 15/16"
K3161 - 1 1/4 3 1/8" 3 1/4" 3 1/8" 2 9/16" 1 7/16"
K3162 - 1 1/4 3 11/16" 3 13/16" 3 7/16" 3 1/16" 2 1/8"
K3163 - 1 1/4 4 1/16" 4 1/8" 4 1/16" 3 7/16" 2 7/16"
K3160 - 1 1/2 2 11/16" 2 7/8" 2 7/16" 2 1/8" 1 1/32"
K3161 - 1 1/2 3 3/16" 3 5/16" 3 3/16" 2 9/16" 1 17/32"
K3162 - 1 1/2 3 9/16" 3 13/16" 3 13/16" 3 1/8" 2"
K3163 - 1 1/2 4 7/16" 4 3/8" 4 1/2" 3 5/8" 2 27/32"
K3160 - 2 2 15/16" 3 1/8" 2 15/16" 2 3/8" 1 1/16"
K3161 - 2 3 7/16" 3 5/8" 3 1/2" 2 7/8" 1 19/32"
K3162 - 2 4 1/8" 4 1/8" 4 1/16" 3 7/16" 2 1/8"
K3163 - 2 4 11/16" 4 11/16" 4 3/4" 3 15/16" 2 5/8"
K3164 - 2 5 1/4" 5 3/16" 5 1/4" 4 1/2" 3 1/8"
K3160 - 2 1/2 3 1/4" 3 3/8" 3 1/4" 2 5/8" 1 1/16"
K3161 - 2 1/2 3 7/8" 3 15/16" 3 7/8" 3 1/4" 1 7/8"
K3162 - 2 1/2 4 9/16" 4 9/16" 4 5/8" 3 7/8" 2 5/16"
K3163 - 2 1/2 5 1/8" 5" 5 1/8" 4 1/4" 2 7/8"
K3164 - 2 1/2 5 7/16" 5 5/16" 5 1/2" 4 9/16" 3 1/16"
Material: Carbon Steel (Stainless steel available)Standard Finish: Plain or Electro-PlatedService: Designed to protect pipe insulation onhigh temperature pipe lines. Saddles are 12”long. Center rib is furnished on all saddle sizes12” and aboveOrdering: Specify part number and finish. SelectPart Number by insulation thickness and addnominal pipe size
68
Size for Roller Part Number
Part NumberNominalPipe Size
K3114; K3120;K3122;K3122A
K3117SL;K3118SL;
K3119SL; K3124;K3126 K3110
Design Load(Lbs.)
Wt./C(Lbs.)
K3160 - 3
3"
4” 2” to 3 1/2” 5” 1800 210
K3161 - 3 5” 4” to 6” 6” 1800 268
K3162 - 3 6” 4” to 6” 8” 1800 358
K3163 - 3 8” 4” to 6” 8” 1800 417
K3164 - 3 8” 8” to 10” 10” 1800 459
K3160 - 3 1/2
3 1/2"
5” 4” to 6” 6” 1200 226
K3161 - 3 1/2 6” 4” to 6” 8” 1800 289
K3162 - 3 1/2 8” 4” to 6” 8” 1800 364
K3163 - 3 1/2 8” 8” to 10” 10” 1800 422
K3164 - 3 1/2 10” 8” to 10” 10” 1800 488
K3160 - 4
4"
5” 4” to 6” 6” 1800 226
K3161 - 4 6” 4” to 6” 8” 1800 289
K3162 - 4 8” 8” to 10” 8” 1800 364
K3163 - 4 8” 8” to 10” 10” 1800 422
K3164 - 4 10” 8” to 10” 10” 1800 488
K3165 - 4 10” 8” to 10” 12” 1800 616
K3160 - 5
5"
6” 4” to 6” 8” 1800 250
K3161 - 5 8” 4” to 6” 8” 1800 289
K3162 - 5 8” 8” to 10” 10” 1800 364
K3163 - 5 10” 8” to 10” 10” 1800 422
K3164 - 5 10” 8” to 10” 12” 1800 488
K3165 - 5 12” 8” to 10” 14” 1800 643
K3160 - 6
6"
8” 8” to 10” 8” 1800 387
K3161 - 6 8” 8” to 10” 10” 1800 498
K3162 - 6 10” 8” to 10” 10” 1800 594
K3163 - 6 10” 8” to 10” 12” 1800 694
K3164 - 6 12” 8” to 10” 12” 1800 794
K3165 - 6 14” 12” to 14” 16” 1800 1009
Pipe Covering Protection Saddle (cont.)
69
Pipe Covering Protection Saddle (cont.)
Centerline of Pipe to Centerline of Roll
Part Number
"A" K3114;K3120;K3122;K3122A
"B" K3117SL;K3118SL; K3119SL;
K3124; K3126"A"
K3110
Centerline ofPipe to Outsideof Saddle "C"
Thicknessof Covering(Per ASTM
C 585)
K3160 - 3 3 3/8" 3 1/2" 3 5/8" 3" 1 1/32"
K3161 - 3 4 1/4" 4 5/16" 4 1/4" 3 9/16" 1 9/16"
K3162 - 3 4 15/16" 4 15/16" 4 15/16" 4 3/16" 2 1/16"
K3163 - 3 5 7/16" 5 3/8" 5 7/16" 4 5/8" 2 9/16"
K3164 - 3 5 13/16" 6" 5 7/8" 4 15/16" 3 1/16"
K3160 - 3 1/2 3 13/16" 3 7/8" 3 13/16" 3 3/16" 1 1/32"
K3161 - 3 1/2 4 3/8" 4 3/8" 4 3/8" 3 11/16" 1 9/16"
K3162 - 3 1/2 5" 5" 5" 4 1/4" 2 1/16"
K3163 - 3 1/2 5 1/2" 5 11/16" 5 9/16" 4 5/8" 2 25/32"
K3164 - 3 1/2 6 3/16" 6 5/16" 6 3/16" 5 1/4" 3 1/16"
K3160 - 4 4 1/8" 4 1/8" 4 1/8" 3 7/16" 1 1/16"
K3161 - 4 4 11/16" 4 7/16" 4 3/4" 4" 1 9/16"
K3162 - 4 5 5/16" 5 1/4" 5 5/16" 4 1/2" 2 1/16"
K3163 - 4 5 13/16" 6" 5 7/8" 4 15/16" 2 9/16"
K3164 - 4 6 7/16" 6 9/16" 6 7/16" 5 1/2" 3 1/8"
K3165 - 4 7 9/16" 7 5/8" 7 9/16" 6 1/2" 4 1/8"
K3160 - 5 4 11/16" 4 11/16" 4 3/4" 3 15/16" 1 1/32"
K3161 - 5 5 5/16" 5 1/4" 5 5/16" 4 9/16" 1 17/32"
K3162 - 5 5 7/8" 6 1/8" 6" 5 1/8" 2 1/32"
K3163 - 5 6 7/16" 6 9/16" 6 7/16" 5 9/16" 2 9/16"
K3164 - 5 7" 7 3/16" 7 1/8" 6 1/8" 3 3/32"
K3165 - 5 8 3/16" 8 3/16" 8 3/8" 7 1/16" 4 5/32"
K3160 - 6 5 1/4" 5 1/4" 5 1/4" 4 1/2" 1"
K3161 - 6 5 7/8" 6 1/16" 5 15/16" 5" 1 1/2"
K3162 - 6 6 1/2" 6 5/8" 6 1/2" 5 9/16" 2 1/16"
K3163 - 6 7 1/16" 7 1/8" 7 1/8" 6 1/16" 2 9/16"
K3164 - 6 7 5/8" 7 11/16" 7 5/8" 6 9/16" 3 1/16"
K3165 - 6 9 1/16" 8 15/16" 9" 7 3/4" 4 3/16"
70
Size for Roller Part Number
Part NumberNominalPipe Size
K3114;K3120;K3122;K3122A
K3117SL; K3118SL;K3119SL; K3124;
K3126 K3110Design Load
(Lbs.) Wt./C (Lbs.)
K3160 - 8
8"
10” 8” to 10” 12” 1800 478
K3161 - 8 10” 8” to 10” 12” 1800 554
K3162 - 8 10” 8” to 10” 12” 1800 674
K3163 - 8 12” 8” to 10” 14” 1800 782
K3164 - 8 14” 12” to 14” 16” 1800 893
K3165 - 8 16” 12” to 14” 18” 1800 1089
K3160 - 10
10"
12” 12” to 14” 14” 1800 546
K3161 - 10 12” 12” to 14” 14” 1800 642
K3162 - 10 14” 16” to 20” 16” 1800 750
K3163 - 10 14” 16” to 20” 16” 1800 850
K3164 - 10 16” 16” to 20” 18” 1800 957
K3165 - 10 18” 16” to 20” 20” 1800 1137
K3160 - 12
12"
14” 12” to 14” 16” 5000 688
K3161 - 12 14” 12” to 14” 16” 5000 836
K3162 - 12 16” 16” to 20” 18” 5000 963
K3163 - 12 16” 16” to 20” 18” 5000 1091
K3164 - 12 18” 16” to 20” 20” 5000 1218
K3165 - 12 20” 16” to 20” 24” 5000 1462
K3161 - 14
14"
16” 16” to 20” 18” 5000 828
K3162 - 14 16” 16” to 20” 18” 5000 963
K3163 - 14 18” 16” to 20” 20” 5000 1099
K3164 - 14 18” 16” to 20” 20” 5000 1230
K3165 - 14 20” 24” 24” 5000 1486
K3161 - 16
16"
18” 16” to 20” 20” 5000 907
K3162 - 16 18” 16” to 20” 20” 5000 1039
K3163 - 16 20” 16” to 20” 24” 7200 1163
K3164 - 16 20” 24” 24” 7200 1298
K3165 - 16 24” 24” 24” 7200 1554
Pipe Covering Protection Saddle (cont.)
71
Pipe Covering Protection Saddle (cont.)
Centerline of Pipe to Centerline of Roll
Part Number
"A" K3114;K3120; K3122;
K3122A
"B" K3117SL;K3118SL;K3119SL;
K3124; K3126"A"
K3110
Centerline ofPipe to Outsideof Saddle "C"
Thickness ofCovering
(Per ASTM C585)
K3160 - 8 6 1/2" 6 5/8" 6 9/16" 5 9/16" 1 1/32"
K3161 - 8 7 1/16" 7 1/8" 7 1/16" 6 1/16" 1 9/16"
K3162 - 8 7 9/16" 7 5/8" 7 5/8" 6 9/16" 2 1/16"
K3163 - 8 8 5/16" 8 5/16" 8 1/2" 7 3/16" 2 11/16"
K3164 - 8 9 1/16" 8 15/16" 9" 7 3/4" 3 3/16"
K3165 - 8 10" 9 15/16" 10 1/16" 8 11/16" 4 3/16"
K3160 - 10 7 11/16" 7 3/4" 7 7/8" 6 5/8" 31/32"
K3161 - 10 8 5/16" 8 5/16" 8 7/16" 7 3/16" 1 5/8"
K3162 - 10 9" 8 7/8" 8 7/8" 7 11/16" 2 1/8"
K3163 - 10 9 5/8" 9 7/16" 9 1/2" 8 3/16" 2 5/8"
K3164 - 10 10 1/8" 10 3/16" 10 3/16" 8 3/4" 3 1/8"
K3165 - 10 11 1/4" 11 3/16" 11 1/4" 9 3/4" 4 1/8"
K3160 - 12 8 15/16" 8 13/16" 8 7/8" 7 5/8" 1 1/16"
K3161 - 12 9 9/16" 9 7/16" 9 1/2" 8 3/16" 1 5/8"
K3162 - 12 10 1/16" 10 1/8" 10 1/8" 8 3/4" 2 1/8"
K3163 - 12 10 5/8" 10 5/8" 10 5/8" 9 1/4" 2 5/8"
K3164 - 12 11 3/16" 11 3/16" 11 1/4" 9 11/16" 3 1/8"
K3165 - 12 12 5/16" 12 3/16" 12 5/16" 10 3/4" 4 1/8"
K3161 - 14 10 1/16" 9 15/16" 10 1/16" 8 11/16" 1 1/2"
K3162 - 14 10 5/8" 10 5/8" 10 5/8" 9 3/16" 2"
K3163 - 14 11 3/16" 11 3/16" 11 1/4" 9 3/4" 2 1/2"
K3164 - 14 11 3/4" 11 11/16" 11 3/4" 10 1/4" 3"
K3165 - 14 12 7/8" 12 7/16" 12 7/8" 11 3/16" 4"
K3161 - 16 11 1/8" 11 1/8" 11 3/16" 9 11/16" 1 1/2"
K3162 - 16 11 13/16" 11 11/16" 11 3/4" 10 1/4" 2"
K3163 - 16 12 5/16" 12 1/8" 12 5/16" 10 11/16" 2 1/2"
K3164 - 16 12 7/8" 12 9/16" 12 7/8" 11 1/4" 3"
K3165 - 16 13 15/16" 13 9/16" 13 15/16" 12 1/4" 4"
72
Pipe Covering Protection Saddle (cont.)
Size for Roller Part Number
Part NumberNominalPipe Size
K3114;K3120;K3122;K3122A
K3117SL; K3118SL;K3119SL; K3124;
K3126 K3110Design Load
(Lbs.)Wt./C(Lbs.)
K3161 - 18
18"
20” 16” to 20” 24” 5000 979
K3162 - 18 20” 24” 24” 7200 1107
K3163 - 18 24” 24” 24” 7200 1230
K3164 - 18 24” 24” 24” 7200 1362
K3165 - 18 24” 24” - 7200 1617
K3161 - 20
20"
24” 24” 24” 7200 1043
K3162 - 20 24” 24” 24” 7200 1171
K3163 - 20 24” 24” - 7200 1294
K3164 - 20 24” 24” - 7200 1430
K3165 - 20 30” 30” - 7200 1689
K3161 - 24
24"
30” 30” - 7200 1179
K3162 - 24 30” 30” - 7200 1306
K3163 - 24 30” 30” - 7200 1442
K3164 - 24 30” 30” - 7200 1562
K3165 - 24 30” 30” - 7200 1821
K3161 - 30
30"
- 36” to 42” - 7200 1370
K3162 - 30 - 36” to 42” - 7200 1502
K3163 - 30 - 36” to 42” - 7200 1640
K3164 - 30 - 36” to 42” - 7200 1761
K3165 - 30 - 36” to 42” - 7200 2008
K3161 - 36
36"
- 36” to 42” - 7200 1574
K3162 - 36 - 36” to 42” - 7200 1701
K3163 - 36 - 36” to 42” - 7200 1857
K3164 - 36 - 36” to 42” - 7200 1961
K3165 - 36 - 36” to 42” - 7200 2216
73
Pipe Covering Protection Saddle (cont.)
Centerline of Pipe to Centerline of Roll
Part Number
"A" K3114;K3120;K3122;K3122A
"B" K3117SL;K3118SL;K3119SL;
K3124; K3126"A"
K3110
Centerline of Pipeto Outside of Sad-
dle "C"
Thickness ofCovering (PerASTM C 585)
K3161 - 18 12 1/4" 12 1/8" 12 1/4" 10 11/16" 1 1/2"
K3162 - 18 12 7/8" 12 1/2" 12 7/8" 11 1/4" 2"
K3163 - 18 13 3/8" 13" 13 3/8" 11 11/16" 2 1/2"
K3164 - 18 13 15/16" 13 9/16" 13 15/16" 12 1/4" 3"
K3165 - 18 15" 14 9/16" - 13 1/4" 4"
K3161 - 20 13 3/8" 13" 13 3/8" 11 11/16" 1 1/2"
K3162 - 20 13 15/16" 13 1/2" 13 15/16" 12 3/16" 2"
K3163 - 20 14 7/16" 14" - 12 11/16" 2 1/2"
K3164 - 20 14 15/16" 14 9/16" - 13 3/16" 3"
K3165 - 20 16 1/4" 15 7/8" - 14 1/4" 4"
K3161 - 24 15 11/16" 15 5/16" - 13 11/16" 1 1/2"
K3162 - 24 16 1/4" 15 7/8" - 14 3/16" 2"
K3163 - 24 16 3/4" 16 5/16" - 14 5/8" 2 1/2"
K3164 - 24 17 3/8" 16 7/8" - 15 1/4" 3"
K3165 - 24 18 7/16" 17 15/16" - 16 1/4" 4"
K3161 - 30 - 18 7/8" - 16 11/16" 1 1/2"
K3162 - 30 - 19 3/8" - 17 3/16" 2"
K3163 - 30 - 19 15/16" - 17 11/16" 2 1/2"
K3164 - 30 - 20 1/2" - 18 3/16" 3"
K3165 - 30 - 21 1/2" - 19 3/16" 4"
K3161 - 36 - 22 1/8" - 19 11/16" 1 1/2"
K3162 - 36 - 22 5/8" - 20 3/16" 2"
K3163 - 36 - 23 3/16" - 20 11/16" 2 1/2"
K3164 - 36 - 23 11/16" - 21 3/16" 3"
K3165 - 36 - 24 11/16" - 22 3/16" 4"
74
Body Size "R" "S" "T" "U" "V" "W" "X" Wt./C (Lbs.)
1 3 1/2" 5/8" 5 7/8" 4 1/8" 1 3/4" 6 1/8" 3" 700
2 4" 5/8" 6 3/4" 4 3/8" 1 3/4" 7 1/8" 3" 800
3 4 3/8" 5/8" 7 5/8" 5 1/8" 1 3/4" 8 1/8" 3" 900
4 5 1/4" 5/8" 9 1/4" 6 1/8" 1 3/4" 10 1/8" 3" 1100
5 6 1/4" 5/8" 11 5/8" 7" 2 3/4" 12 1/8" 4" 1700
6 7" 5/8" 13 3/8" 8 1/4" 2 3/4" 14 1/8" 4" 2000
7 7 7/8" 3/4" 15 1/8" 9 7/8" 4" 16 1/8" 6" 4000
8 8 7/8" 3/4" 17" 10 7/8" 4" 18 1/8" 6" 4800
9 9 3/4" 3/4" 18 3/4" 11 7/8" 4" 20 1/8" 6" 5400
10 10 7/8" 3/4" 21" 11 3/4" 6" 22 1/8" 8" 6100
11 12 1/8" 7/8" 23 1/8" 14 1/2" 6" 24 1/8" 8" 8900
12 13" 7/8" 25" 15 1/2" 6" 26 1/8" 8" 10200
13 14 3/4" 1 1/8" 27 3/4" 17 1/8" 6" 28 1/8" 8" 11000
14 16 1/2" 1 1/8" 31 1/2" 19 1/4" 6" 32 1/8" 8" 15000
Pipe Alignment Guide - K3281-K3287...
Notes: CU sizes have lead shims between the steel clamp and thecopper tubing. Guides with greater allowable movement available
75
Insulation Thickness
1" 1 1/2"
Nominal PipeSize Part Number BS* SAM** Part Number BS* SAM**
1/2" K3281 - 1/2 1 4" K3281 - 1/2 1 4"
3/4" K3281 - 3/4 1 4" K3282 - 3/4 2 4"
1" K3281 - 1 1 4" K3282 - 1 2 4"
1 1/4" K3281 - 1 1/4 1 4" K3282 - 1 1/4 2 4"
1 1/2" K3281 - 1 1/2 2 4" K3281 - 1 1/2 2 4"
2" K3281 - 2 2 4" K3282 - 2 3 4"
2 1/2" K3281 - 2 1/2 3 4" K3281 - 2 1/2 3 4"
3" K3281 - 3 3 4" K3282 - 3 4 4"
4" K3281 - 4 4 4" K3281 - 4 4 4"
5" K3281 - 5 5 4" K3281 - 5 5 4"
6" K3281 - 6 5 4" K3281 - 6 5 4"
8" K3281 - 8 6 4" K3281 - 8 6 4"
10" K3281 - 10 8 6" K3281 - 10 8 6"
12" K3281 - 12 9 6" K3281 - 12 9 6"
14" K3281 - 14 10 6" K3281 - 14 10 6"
16" K3281 - 16 11 8" K3281 - 16 11 8"
18" K3281 - 18 12 8" K3281 - 18 12 8"
20" K3281 - 20 13 8" K3281 - 20 13 8"
24" K3281 - 24 14 8" K3281 - 24 14 8"
Pipe Alignment Guide (cont.)
Material: SteelStandard Finish: Black PrimerService: Designed for use in directing thermal expansion of insulated or non-insulated pipe in the direction permitted by expansion joints or loops. The use oftwo or more guides on both sides of an expansion joint of loop is recommended.Pipe lines should be supported with hangers or rollers so that when properly in-stalled, the guides will not be supporting any pipe loads. Maximum operatingtemperature should not exceed 750°FOrdering: Specify part number and finish. For use with copper tubing, add CT suf-fix to the part number
* BS = Body Size** SAM = Standard Allowable Movement
76
Insulation Thickness
2" 2 1/2"
NominalPipe Size Part Number BS* SAM** Part Number BS* SAM**
1/2" K3283 - 1/2 2 4" K3284 - 1/2 3 4"
3/4" K3283 - 3/4 3 4" K3284 - 3/4 4 4"
1" K3283 - 1 3 4" K3284 - 1 4 4"
1 1/4" K3283 - 1 1/4 3 4" K3284 - 1 1/4 4 4"
1 1/2" K3283 - 1 1/2 3 4" K3284 - 1 1/2 4 4"
2" K3283 - 2 4 4" K3283 - 2 4 4"
2 1/2" K3283 - 2 1/2 4 4" K3283 - 2 1/2 4 4"
3" K3283 - 3 4 4" K3284 - 3 5 4"
4" K3283 - 4 5 4" K3284 - 4 5 4"
5" K3281 - 5 5 4" K3284 - 5 6 4"
6" K3283 - 6 6 4" K3283 - 6 6 4"
8" K3283 - 8 7 6" K3284 - 8 8 6"
10" K3281 - 10 8 6" K3284 - 10 9 6"
12" K3281 - 12 9 6" K3284 - 12 10 6"
14" K3281 - 14 10 6" K3281 - 14 10 6"
16" K3281 - 16 11 8" K3281 - 16 11 8"
18" K3281 - 18 12 8" K3281 - 18 12 8"
20" K3281 - 20 13 8" K3281 - 20 13 8"
24" K3281 - 24 14 8" K3281 - 24 14 8"
Pipe Alignment Guide (cont.)
* BS = Body Size** SAM = Standard Allowable Movement
77
Insulation Thickness
3" 3 1/2" 4"
NominalPipe Size Part Number BS* SAM** Part Number BS* SAM** Part Number BS* SAM**
1/2" K3285 - 1/2 4 4" K3285 - 1/2 4 4" K3287 - 1/2 5 4"
3/4" K3284 - 3/4 4 4" K3286 - 3/4 5 4" K3286 - 3/4 5 4"
1" K3284 - 1 4 4" K3286 - 1 5 4" K3286 - 1 5 4"
1 1/4" K3284 - 1 1/4 4 4" K3286 - 1 1/4 5 4" K3286 - 1 1/4 5 4"
1 1/2" K3284 - 1 1/2 4 4" K3286 - 1 1/2 5 4" K3286 - 1 1/2 5 4"
2" K3285 - 2 5 4" K3285 - 2 5 4" K3287 - 2 6 4"
2 1/2" K3285 - 2 1/2 5 4" K3285 - 2 1/2 5 4" K3287 - 2 1/2 6 4"
3" K3284 - 3 5 4" K3286 - 3 6 4" K3286 - 3 6 4"
4" K3285 - 4 6 4" K3285 - 4 6 4" K3287 - 4 7 6"
5" K3284 - 5 6 4" K3286 - 5 7 6" K3287 - 5 8 6"
6" K3285 - 6 7 6" K3286 - 6 8 6" K3286 - 6 8 6"
8" K3284 - 8 8 6" K3286 - 8 9 6" K3286 - 8 9 6"
10" K3284 - 10 9 6" K3286 - 10 10 6" K3286 - 10 10 6"
12" K3284 - 12 10 6" K3286 - 12 11 6" K3286 - 12 11 6"
14" K3285 - 14 11 8" K3285 - 14 11 8" K3287 - 14 12 8"
16" K3285 - 16 12 8" K3285 - 16 12 8" K3287 - 16 13 8"
18" K3285 - 18 13 8" K3285 - 18 13 8" K3287 - 18 14 8"
20" K3285 - 20 14 8" K3285 - 20 14 8" K3285 - 20 14 8"
24" - - - - - - - - -
Pipe Alignment Guide (cont.)
* BS = Body Size** SAM = Standard Allowable Movement
78
Pipe Size TravelPart
NumberDepth
"B"Diameter
"D"Height
"H"Length
"L"Width
"P"Width"W"
MaximumReccommended
Load (Lbs.)
1" to 24"
2 1/2" K3897 5" 4" 5 5/16" 9 1/2" n/a 9 1/2" 16000
4"
K3891 2" n/a 4 5/8" 6" 4" n/a 12000
K3892 4" n/a 5 1/8" 6" 4" 7" 12000
K3893 4" n/a 5 1/8" 6" 4" 7" 12000
K3894 2" n/a 4 5/8" 6" n/a 6" 12000
K3895 4" n/a 5 1/8" 6" 6" 10" 24000
K3896 4" n/a 5 1/8" 6" 6" 10" 24000
10"
K3891 2" n/a 4 5/8" 12" 4" n/a 12000
K3892 4" n/a 5 1/8" 12" 4" 7" 12000
K3893 4" n/a 5 1/8" 12" 4" 7" 12000
K3894 2" n/a 4 5/8" 12" n/a 6" 12000
K3895 4" n/a 5 1/8" 12" 6" 10" 24000
K3896 4" n/a 5 1/8" 12" 6" 10" 24000
Pipe Slide Assembly Series - K3891-K3897
Material:Tee - Carbon SteelFacing Plate - Stainless Steel Type 304Base - Carbon Steel with Teflon slide pads
Finish: Black paintService: Designed to support pipe where horizontal movement from expansion and con-traction is present. Fits up to 3” insulation thicknessOperating Temperature Rating: 400°F maximumLoading: Capable of supporting constant loads up to 2,000 Psi at 70°F
79
Pipe Slide Assembly Series (cont.)
K3891 K3892 K3893
K3894K3895 K3896
K3897 Option: End PlatesOption: K3140Clamps
Notes: K3891, K3892 and K3893 are designed for longitudinal movement only. K3894,K3895 and K3896 are designed for longitudinal and limited transverse movement.K3897 is designed for up to 5 inches of horizontal movement in any direction, depend-ing on the installed position.
K
4” (except K3897)10” (except K3897)2 1/2” (K3897 only) K
80
Pipe Slide Assembly Series (cont.)
K3891 & K3894 Side View K3892 & K3895 Side View
K3894 Front View
K3891 Front View
K3892 Front View
K3895 Front View
81
Pipe Slide Assembly Series (cont.)
K3897 Side View
K3893 & K3896 Side View
K3897 Front ViewK3893 Front View
K3896 Front View
82
Pipe Slide Assembly Series - K3991-K3993B...
Pipe Size TravelPart Num-
berDepth
"B"Width
"C" Height "H"Length
"L"Width
"P"Width"W"
MaximumReccommended
Load (Lbs.)
1" to24"
4"
K3991 - 5 3" 8 1/2" 4 7/16" 6" 6" n/a 16000
K3993 - 5 3" n/a 4 7/16" 6" 2" 4 1/2" 12000
K3993B - 5 3" 8 1/2" 4 11/16" 6" 2" 4 1/2" 12000
K3991 - 10 4" 14 1/2" 4 7/8" 6" 12" n/a 32000
K3993 - 10 4" n/a 4 7/8" 6" 6" 8 11/16" 24000
K3993B - 10 4" 14 1/2" 5 1/8" 6" 6" 8 11/'16" 24000
10"
K3991 - 5 3" 8 1/2" 4 7/16" 12" 6" n/a 16000
K3993 - 5 3" n/a 4 7/16" 12" 2" 4 1/2" 12000
K3993B - 5 3" 8 1/2" 4 11/16" 12" 2" 4 1/2" 12000
K3991 - 10 4" 14 1/2" 4 7/8" 12" 12" n/a 32000
K3993 - 10 4" n/a 4 7/8" 12" 6" 8 11/16" 24000
K3993B - 10 4" 14 1/2" 5 1/8" 12" 6" 8 11/'16" 24000
Material: Tee and H Slides - Carbon Steel with Heat Cured PTFE modifiedcoating at slide plate; Base - Carbon Steel with Teflon slide partsStandard Finish: Black paintService: Designed to support pipe where horizontal movement fromexpansion and contraction is present.Operating temperature rating: 400°F maximum at baseLoading: Capable of supporting constant loads up to 2000 Psi at 70°F
83
Maximum
Pipe Side Assembly Series (cont.)
K3993-5
K3993B-5
T-Slide
CL (standard slidew/K3140 clamps)
EP (standard slide w/end plates)H-Slide
K3993B-10
K3993-10
K
K3140
84
Pipe Side Assembly Series (cont.)
Pipe Size "BOP" "COP"
10" 4 1/8" 9 1/2"
12" 4 1/4" 10 5/8"
14" 4 3/8" 11 3/8"
16" 4 3/8" 12 3/8"
18" 4 3/8" 13 3/8"
20" 4 1/2" 14 1/2"
24" 4 5/8" 16 5/8"
K3991-5 & K3991-10 Side View
K3991-5 Front View K3991-10 Front View
Pipe to be field weldedto T or H slides
85
Pipe Slide Assembly Series (cont.)
Pipe Size "BOP" "COP"
10" 4 1/8" 9 1/2"
12" 4 1/4" 10 5/8"
14" 4 3/8" 11 3/8"
16" 4 3/8" 12 3/8"
18" 4 3/8" 13 3/8"
20" 4 1/2" 14 1/2"
24" 4 5/8" 16 5/8"
K3993-5 Front View K3993-10 Front View
K3993-5 & K3993-10 Side View
Pipe to be field weldedto T or H slides
86
Pipe Size "BOP" "COP"
10" 4 3/8" 9 3/4"
12" 4 1/2" 10 7/8"
14" 4 5/8" 11 5/8"
16" 4 5/8" 12 5/8"
18" 4 5/8" 13 5/8"
20" 4 3/4" 14 3/4"
24" 4 7/8" 16 7/8"
Pipe Slide Assembly Series (cont.)
Pipe to be field weldedto T or H slides
K3993B-5 Front View K3993B-10 Front View
K3993B-5 & K3993B-10 Side View
87
MaxSpan R.H.
Pipe Size Insulation Length Shield Length Shield Gauge Plate Dimensions Travel Allowed
1/2" to 1 1/2" 9" 6" 18 ga. n/a +/- 2"
2" to 3" 9" 6" 16 ga. n/a +/- 2"
4" to 8" 9" 6" 14 ga. 1/8" x 6" +/- 2"
10" to 12" 12" 9" 14 ga. 1/4" x 6" +/- 2"
14" to 24" 14" 12" 14 ga. 1/4" x 10" +/- 3"
Description/Features: The MaxSpan R.H. thermal hanger shield is specifically designed to provide asuperior safety margin for pipe mounted on pipe rollers, flat surfaces or with supports where pointloading may be a concern. These rugged units allow hanger spans up to the maximum allowed in Ta-ble 3 of the MSS SP-69. They are appropriate for either hot or cold pipe systems. The insulation andvapor barrier extend beyond the galvanized steel shield for a neat vapor-tight joint with the adjoininginsulation. Units for pipe 4” and larger include a wear/weight distribution plate of carbon steel(primer pained). Additionally, a segment of ultra high density, 900 PSI calcium silicate is fabricatedinto units for 10” pipe size and larger. The MaxSpan R.H. meets or exceeds the MSS standard for Type40 Shields per MSS SP-58, Paragraph 9.2.2Applications: For indoor use on all roller hanger systems and flat surfaces Chilled to steam piping and dual temperature lines Hanger spans per MSS SP-69 Table 3 Insulation thickness 1/2” to 4”Materials/Construction: 135 PSI Calcium silicate meeting ASTM C-533, C-585, C-795, E-84, Flame Spread,
Smoke Developed -0- Adhesive complying with NFPA 90-A and ASTM E-84, Flame Spread -10-, Smoke Developed -0- G-90 Galvanized steel shield, small check per ASTM A-527 Wear/Weight Distribution Plate—carbon steel meeting ASTM A-36 Vapor Barrier of all service jacket meeting ASTM D-774, D-828 and E-84 Structural insert (10” pipe and larger) minimum 900 PSI calcium silicate
Shown with 900 PSI Structural Insert
88
Pro-Shield
Description/Features: Pro-Shields are 360° thermal hanger shields designed to meet the broadestrange of pipe support applications. They provide a continuous section of insulation and vapor barrierthrough a wide variety of pipe hangers for pipe systems operating between +20°F and 1200°F. The in-sulation and vapor barrier extend beyond the galvanized steel shield for a neat vapor-tight joint withthe adjoining insulation. Pro-Shields are suitable for use in any type of clamps as well as in band-typehangers and on flat surfaces. To assure proper support in all situations, high density 450 PSI insertsare installed in units for 10” pipe with 1” insulation thickness and in all units for 12” pipe and larger.Pro-Shields meets or exceeds the MSS standard for Type 40 Shields per MSS SP-58, Paragraph 9.2.2Applications: For indoor use on clamping support systems, flat surfaces, clevis or other band-type hangers Pipe sizes 16” and larger in clevis or two bolt hangers only Chilled to steam piping and dual temperature lines Hanger spans per MSS SP-69 Table 5 Insulation thickness 1/2” to 4”Materials/Construction: 135 PSI Calcium silicate meeting ASTM C-533, C-585, C-795, E-84, Flame Spread -0-, Smoke Devel-
oped -0-, Thermal Conductivity (’k’) .40 @ 75°F mean Adhesive complying with NFPA 90-A and ASTM E-84, Flame Spread -10-, Smoke Developed -0- G-90 Galvanized steel shield, small check per ASTM A-527 Vapor Barrier of all service jacket meeting ASTM D-774, D-828 and E-84, Flame Spread -5-, Smoke
Developed -5- Structural insert (12” pipe and larger) minimum 450 PSI calcium silicate meeting ASTM C-533, C-
795 and E-84, Flame Spread -0-, Smoke Developed -0- All units and components are asbestos free and 100% made and assembled in the U.S.A
Pipe Size Insulation Length Shield Length Shield Gauge
1/2" to 1 1/2" 6" 4" 22 ga.
2" to 5" 6" 4" 20 ga.
6" to 8" 9" 6" 16 ga.
10" to 12" 9" 6" 14 ga.
14" to 24" 12" 9" 12 ga.
89
Quik-Shield
Description/Features: Quik-Shields are economically priced 180° thermal hanger shields providing acontinuous section of insulation and vapor barrier through a variety of pipe hangers. The vapor barrierjacket extends beyond the galvanized steel shield and beyond the galvanized steel shield and beyoundthe insulation insert for a neat, vapor-tight fit with both the adjoining and the field-applied topinsulation. To assure proper support in all situations, high density 450 PSI structural inserts areinstalled on units for 10” pipe with 1” wall thickness and on all units for 12” pipe and largerApplications: For indoor use on flat surfaces, clevis or other band-type hangers Pipe sizes 16” or larger in clevis hangers only Chilled to steam piping and dual temperature lines Hanger spans per MSS SP-69 Table 5 Insulation thickness 1/2” to 4”Materials/Construction: 135 PSI Calcium silicate meeting ASTM C-533, C-585, C-795, E-84, Flame Spread -0-, Smoke Devel-
oped -0-, Thermal Conductivity (’k’) .40 @ 75°F mean Adhesive complying with NFPA 90-A and ASTM E-84, Flame Spread -10-, Smoke Developed -0- G-90 Galvanized steel shield, small check per ASTM A-527 Vapor Barrier of all service jacket meeting ASTM D-774, D-828 and E-84, Flame Spread -5-, Smoke
Developed -5- Structural insert (12” pipe and larger) minimum 450 PSI calcium silicate meeting ASTM C-533, C-
795 and E-84, Flame Spread –0-, Smoke Developed -0- All units and components are asbestos free and 100% made and assembled in the U.S.A
Pipe Size Insulation Length Shield Length Shield Gauge
1/2" to 1 1/2" 6" 4" 22 ga.
2" to 5" 6" 4" 20 ga.
6" to 8" 9" 6" 16 ga.
10" to 12" 9" 6" 14 ga.
14" to 24" 12" 9" 12 ga.