Pilot RCU 2.0 Product Overview V10 - Dingli Documents/Pilot RCU... · • Network optimization •...
Transcript of Pilot RCU 2.0 Product Overview V10 - Dingli Documents/Pilot RCU... · • Network optimization •...
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Contents
1. Overview
2. Product Details
3. New Features
4. Main Features
5. Conclusion
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Pilot RCU 2.0 is an autonomous data collection and measurement
probe that is mainly used for daily network quality monitoring, voice
and data service verification, and benchmarking. It consists of a
variety of test modules supporting multiple network standards.
Pilot RCU 2.0 provides a built-in data processing platform, a
modularized design with high performance and stability, and low
power consumption.
Overview
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Overview — Network and Market Requirements
Current Network Challenges Market Requirements
Current Challenges with Traditional Drive
Test Tool
• Multi-operator environment
• Pilot interference
• Congested sites in urban areas
• Single site required for wide coverage in a
suburban area
• Area with poor or no coverage
• Low efficiency with the manual testing mode
• Connection cables are cluttered and are easily
damaged
• Traditional test requiring assisted operation
• Unstable connection with multiple test terminals
• Not portable and requires an external power supply
• 24-hour continuous operation
• Remote control
• Simultaneous, multi-terminal and multi-network
testing
• Unattended testing
• Flexible in switching power source between a built-
in UPS battery and an external power supply
• Applicable in extreme environments
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Overview — Test Scenarios
Test Type
• New services' quality verification.
• Interference verification.
• Coverage verification.
• Hotspots congestion verification
Test Scenarios
• Outdoor: can be deployed in buses, taxis, trains, ships, etc.
• Indoor: stationary hotspots such as hotels, shopping malls, residential areas, offices, etc.
Customers
• Network operators
• System vendors
• Service providers
• Government authorities such as the
Telecommunications Regulatory Body
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Overview — Product Information
Compact form factor
• Shock resistant, simple, and stable
No fans
No noise during operation and dust-proof
Good heat-dissipation
• Aluminum design for good heat-dissipation
Independent indicators
• Independent indicators for various operating statuses
Wide voltage range
• DC 9~30 v, applicable to various environment
Self-protection design
• Power supply interface protection to avoid incorrect power supply connection
• Real-time hardware status monitoring and self-protection against overheating, overvoltage, and overcurrent
Extended USB interfaces
• Supports external scanners (PCTEL) and USB Dongle which is used as an external data card
CE certified
Highly integrated
• Built-in test modules
• Provides multi-module and multi-band solutions for
2G/3G/4G technologies, and supports HSPA+ 42.2
M/21.1 Mbps and LTE CAT6 solutions
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Overview — Advantages and Values
Easy operation, automatic and multi-terminal testing after device starts
Large volumes of data collected and real-time data upload
Built-in battery and external power supply
Continuous and stable operation without manual attendance
Provides power solutions for various test scenarios
Investment on robust and efficient solution
Improves work efficiency by reducing manual costs
Applicable to extreme environments and remote controlled
Advantages Values
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Product Details — System Architecture
• Pilot RCU operates as one of the data collection and measurement probe for Pilot Fleet Unify system.
• Pilot Fleet Unify system is able to remotely manage all DingLi's drive test data collection portfolio through its
centralized device and data management platform.
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Product Details — Introduction to Fleet Unify
The Fleet Unify platform provides remote and centralized measurement probes and data management. It is capable of handling large
volumes of data uploaded remotely for storage, automatic processing, reporting and analysis. Users may add and control test devices
through the Web client of Pilot Fleet Unify and perform data post processing and analysis through Pilot Fleet Unify Analyser.
Test
Control
Device
ManagementStatistics
Report
Data Analysis
Data
Management
Apply test
plans in
batches
Dingli test
devicesGenerates statistic
reports
Macro and micro
data analysis
Manages large volumes of data
Device Management Data Management
• Imports multiple devices by
importing an EXCEL file
• Records device status
• GIS real-time monitor
• Sort by test region or device
type
• Sort by region or project
• Powerful search function
• View decoding information
• GIS positioning
Data Analysis
• Macro presentation & Micro
analysis
• System evaluation
• Network optimization
• Test monitoring
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Product Details — Pilot RCU 2.0 Specifications
Item Description
Voltage 9V-30V DC
Power consumption 18 W (avg. ), 30 W (max.)
Current 2 A (avg.), 3 A (max.)
Operating temperature -25°C to +65°C
Humidity < 95% RH, without condensation
Impact 500m/s2
Vibration 2 g, 5 Hz-500 Hz
Dimension 340 x 238 x 59 mm
Weight 4.2 Kg
Internal storage 4 GB to 64 GB
Working hours (using battery
only)
120 minutes or more (with built-in battery), 10 hours or more (with stand
external battery)
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Product Details — Functions and Performance
Services
test
Monitoring
function
Device
Performance
• Supports IOT (Interoperability Test) for 2G/3G/4G
• Supports multiple network technologies: LTE 2CC
(CA)/HSPA+/WCDMA/GSM/GPRS/EDGE/CDMA/TD-SCDMA
• Supports Call Test (PESQ/POLQA), Value Added Services Test, and
Data Test
• Supports real-time data transmission through Modem, WIFI, and
Bluetooth
• High-performance hardware configuration to meet the requirements for
simultaneous MOS and data service tests of multiple terminals
• Supports parallel service tests for multiple network technologies
(2G/3G/4G)
• SD memory card with large capacity (32 GB) to meet the requirements
for long-term data and log file storage
• Low power consumption, built-in UPS and external batteries to ensure
continuous operation
• Checks parameters, events, and test route information on the
Web client of Fleet Unify
• Supports alarms with emails or messages
Pilot RCU 2.0
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Product Details — Indicators
Indicator Description Normal Operating Status
Modem Indicates if the Modem
is operating normally
Blinks Green
Test Modules
(CH2-CH9)
Indicates if the test
modules operates
normally
Green
SYS Indicates if the system is
running normally
Blinks Green
GPS Indicates if the GPS
module is running
normally
Blinks Green
HDD Indicates the read and
write status of the CF
card
Power Indicates the built-in and
external power supply
status
Main: Green
EXT: Green
BAT Indicates the power
capacity of the built-in
battery
Low: Red
CHG: Green or not lighted
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Product Details — Buttons and Interfaces
Power button External power interface Built-in battery slot
Extended USB interfaces CF card slot
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Product Details — Interface and SIM Card Slots
Item Usage Description
LAN Ethernet interface LAN cable interface for connecting RCU 2.0
to a PC for data transmission and device
bug fixing
GPS GPS antenna interface GPS antenna interface
Modem (CH1)Modem antenna interface Magnetic mount antenna interface
CH2-CH9 Antenna interfaces of eight test
modules
Antenna interfaces of eight test modules
corresponding to the channels from CH2 to
CH9
Aux Test module secondary antenna
interface
Secondary antenna interface for connecting
test modules
SIM slots Modem and SIM card slots Insert SIM cards according to the
information on the labels besides
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Product Details — Antennas
External GPS antenna Rod antenna for test modules
Magnetic mount antenna for
Modem or test modules
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Product Details — Antennas (for LTE)
Rod antenna for 4G test
modules
Magnetic mount antenna
for 4G test modules or
Modem
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Product Details — Antenna and Extended Antenna Plate
Standard antenna plate: used to
protect antennas and magnetically
attach the antennas
Extended antenna plate: used to
expand the distance between
antennas
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Product Details — Power Adapter and Power Line
Power adapter for a voltage
change from 220 V to 12 V
RCU cigarette
lighter cord
220 V AC power cord
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Product Details — Bluetooth GPS
External Bluetooth GPS receiver Bluetooth adapter
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Product Details — Supported Tests
RCU 2.0 supports the following service tests:
• Voice (PESQ, POLQA)
• CSFB
• ATTACH
• PDP Active/Deactive
• PING
• HTTP Page
• HTTP File Down
• WAP
• SMS
• FTP (DL&UL, customized threats)
• Video Streaming
• MMS
• Trace Route
• Speed Test
• Multi-RAB
• HTTP Upload
• HTTP Video Play
• DNS LookUp
• PBM
• App Facebook
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Supported Modules
23
Module Type Supported Frequency and Bands
WCDMA/GSM ModuleHSPA/UMTS: 850/1900/2100 MHz
EDGE/GPRS/GSM: 850/900/1800/1900 MHz
CDMA1X/EVDO CDMA2000, 1X, EVDO: 800 MHZ
FDD-LTE/WCMD/PA+/GSM
FDD-LTE: 800/900/1800/2100/2600 MHz
UMTS/HSPA+: 900/2100 MHz
GSM/GPRS/EDGE: 850/900/1800/1900 MHz
FDD-LTE/WCMD/PA+/GSM
FDD-LTE: 700 (B17)/AWS
UMTS/HSPA+: 850/1900/2100 MHz
GSM/GPRS/EDGE: 850/900/1800/1900 MHz
FDD-LTE/WCMD/PA+/GSM
FDD-LTE: Band 1/3/7/8/20
UMTS: Band 1/2/5/6/8
GSM 850/900/1800/1900 MHz
FDD-LTE/TDD-LTE/UMTS/GSM
FDD-LTE: Band 1/3/5
TDD-LTE: Band 38/39/40/41
UMTS: Band 1/5
GSM: 850/900/1800/1900
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Supported Modules
Module Type Supported Frequency and Bands
TDD-LTE/FDD-LTE/UMTS/GSM
FDD-LTE: Band 1/3/7/17
TDD-LTE: Band 38/39/40/41
WCDMA: Band 1/2/5/8
GSM: 1900/1800/900/850 MHz
FDD-LTE/UMTS/GSM
FDD-LTE: Band 1/2/3/4/5/7/8/20/28
WCDMA: Band 1/2/3/4/5/8
GSM: 1900/1800/900/850 MHz
TDD-LTE/FDD-LTE/UMTS/CDMA/GSM
FDD-LTE: Band 1/2/3/4/5/8/12/17/25/26
TDD-LTE: Band 38/41
WCDMA/HSPA+: Band 1/2/4/5/8
CDMA/EVDO: BC0/BC1/BC10
Quad-band EDGE/GPRS/GSM:1900/1800/900/850 MHz
UMTS/GSMWCDMA: Band 1/2/5/8
Quad-band EDGE/GPRS/GSM:1900/1800/900/850 MHz
TDD-LTE/FDD-LTE/UMTS/TD-SCDMA/CDMA/GSM
FDD-LTE: Band 1/3
TDD-LTE: Band 38/39/40/41
WCDMA: Band 1
CDMA: Band BC0
GSM: 900 E/1800
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Module Type Supported Frequency and Bands
TDD-LTE/FDD-
LTE/UMTS/CDMA/GSM
(Support CA)
FDD-LTE: Band 1/2/3/4/5/7/8/20/26/28
TDD-LTE: Band 38/39/40/41
WCDMA: Band 1/2/4/5/8
CDMA/EVDO: Band bc0/bc1
GSM: 1900/1800/900/850
CA: Intra-band contiguous: 2/3/4/7/38/39/40/41
Intra-band non-contiguous: 2/3/4/7/41
Inter-band: 1+3, 1+5, 1+7, 1+8, 1+20, 1+26, 3+5, 3+7, 3+8, 3+20, 3+26, 3+28, 7+20, 7+28, 5+7, 39+41
TDD-LTE/FDD-LTE/UMTS
(Support CA)
FDD-LTE: Band 1/3/5/7/8/18/19/21/28
TDD-LTE: Band 38/39/40/41
WCDMA: Band 1/5/6/8/9/19
CA: 1 + 1/5/8/18/19/21
3 + 3/5/7/8/19/28
7 + 5/7/28
21 + 19/21
38 + 38
40 + 40
41 + 41
Supported Modules
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
LTE Carrier Aggregation (CA) Test
Pilot RCU 2.0 V10.11 supports LTE 2CC
(2 component carriers) CA test with the
R1525 and MC7430 modules.
LTE category: 6
Theoretical peak rate
Downlink rate:
• FDD: 300 Mbps
• TDD: 222 Mbps
Uplink rate:
• FDD: 50 Mbps
• TDD: 26 Mbps
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
PESQ/POLQA Configuration for Separate Modules
• Users may configure different MOS algorithm (PESQ or POLQA) for different modules within the same Pilot
RCU. For example, users may configure PESQ for Module 2 and 3, and configure POLQA for Module 4 and 5.
• Users may configure this information under Advanced Settings of the Call (MOC/MTC) test plan settings
page.
• This provides greater flexibility for the test configuration and scenarios.
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Access Internet Through Wireless Hotspot
The wireless hotspot created by the test device can be used to access the internet.
Use by Pilot Watcher to access the internet and refresh the map window.
Can also be used for the mobile phone and laptop to access the internet.
The transmission rate depends on the performance and quality of the RAT.
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Private Server for HTTP Upload Test
Pilot RCU 2.0 V10.11 supports private servers for HTTP Upload test.
Users may create their own HTTP Upload server.
Detailed operation can be found at section 10 “A1.Pilot RCU 2.0 User Manual
V10.11”.
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
APP Facebook Test
Facebook has updated its login protocol.
This version supports Facebook test with the new login protocol.
The test service name is changed to APP Facebook.
Note: Users need to apply for a Facebook account on the Facebook website, use this account
to apply for a corresponding App ID, and write down the App Secret.
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
GPS with Inertial Navigation System
Inertial Navigation System
A self-contained navigation technique in which measurements provided by accelerometers and gyroscopes are used to track the
position and orientation of an object relative to a known starting point, orientation and velocity.
Pilot RCU 2.0 V10.11 provides a GPS solution with Inertial Navigation System.
Supports service test in the tunnel or densely populated area with high-rise buildings
Facilitates the automatic pinpointing on the GPS measurement plot when the GPS signal is lost or very poor.
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Main Features — MOS Test
1 2
4 3
Uses independent
channels to avoid
any interference
among test modules
• Compatible with
multi-network
technologies
• Flexible hardware
configuration
Supports the PESQ
algorithm
Simultaneous
voice replay and
recording
Eight
channel
PESQ
2. POLQA
Typical Application
Network Benchmarking
Test data can be uploaded to Fleet Unify
to generate Benchmarking Reports and
provide KPI comparison for each network.
Call test
Based on Time Window synchronization
function, all test modules may initiate or
end a call simultaneously.
Test module number = RCU number x 8
1. PESQ
• MOS test (POLQA) is supported only by dual-kernel Pilot RCU 2.0,
and internal POLQA sound card is required.
• Up to four channel MOS test (POLQA) is supported (Mobile to Mobile
or Mobile to Land).
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Main Features — VoLTE Test
Maximum internal modules working simultaneously
• Pilot RCU 2.0 supports up to eight internal
VoLTE test modules.
• Eight channels can be used to conduct test
independently and simultaneously without
any interference.
VoLTE PESQ and POLQA simultaneously
Pilot RCU 2.0 supports up to four channels of
VoLTE PESQ and POLQA test simultaneously.
Typical Application Case
VoLTE KPI comparison among multiple
operators
Typical Application Case
4-channel PESQ + 4-channel POLQA
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Main Features — Various Data Service Tests
Benchmarking Test—Data Service Test
Typical Application Case
• Data network coverage rate
• KPIs and parameters for optimization
• Average Download/Upload Rate
• Success/Dropped Rate
• Ping Delay
• KPIs of HTTP Video tests, such as Jitter, Packet Loss Rate
Common Data Service Test
FTP
Ping
WAP
Video Play
HTTP
Only common data test services are listed. For
more information about test services, see slide
20.
Performance Description:
• Voice + data tests
Four test modules are configured for PESQ MOS test and four test
modules for FTP test.
• Simultaneous data tests
Multiple data services (such as FTP, HTTP, Ping, and Email) are
configured in one test module or configured in multiple test modules;
a maximum of eight test modules can be configured for
simultaneous test.
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Main Features — GPS and Logfile Information Synchronization
All test modules in a Pilot RCU 2.0 uses the same GPS receiver
• GPS and test logfile information (such as parameter and event information) can be automatically
synchronized for easy analysis
• For the same Pilot RCU 2.0, all test module’s log files (at a given time) shares the same GPS
information/positioning
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Main Features — Optimum Stability and Efficiency
Automatic test
Loop test as required
Unattended test
Execution with high efficiency
Intelligent reset
7/24 stable
operation
Based on the stable and highly-efficient
Linux system, Pilot RCU 2.0 provides
self-hardware-and-software monitoring
capability for automatic trouble
detection and reset, which ensures
optimum operation stability and
efficiency.
Hardware monitoring: CPU and
motherboard temperature monitoring,
overvoltage and overcurrent protection,
etc.
Software monitoring: no response from
test modules, abnormal test program
status, continuous abnormal test
events, etc.
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Main Features — Remote Device Control
39
Control Device on Web Client of Pilot Fleet Unify
Reboot devices
Update test plans
Stop and pause tests
Control Device by Delivering SMSMessages
Reboot devices
Modify Modem dial configuration
Modify server IP and port information configured in the device
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Main Features — Easy Test Control on Pilot Fleet Unify
Easy test plan configuration
• Execute test based on configured time range
• Execute test based on configured execution count
• Execute test based on configured workdays, for example, from Monday to Thursday
• One-click test plan change
Flexible logfile upload to Pilot Fleet Unify server
• Upload in real time
• Upload when the device is in the idle mode
• Do not upload
• Upload by using Modem or any other test module
Test controlled by customized regions
• Customize test regions as required
• Test only in specific regions
• Stop test or enter the idle mode when outside of specific regions
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Main Features — Easy Operation on Pilot Fleet Unify
• Visual test plan/task template configuration
• Centralized test information configuration and
maintenance
• Centralized test event and alarm monitoring
• Centralized Logfile management
• Automatic logfile statistics and report
• Remote and automatic device firmware upgrade
Various operations can be managed through simple
and user friendly Web interface of Pilot Fleet Unify.
Powering Network Experience©Dingli (05/07/2016) DL 41011 PV
Conclusion
1• 24-hour continuous operation with high stability, large volume of data collection
2• Highly integrated and high performance hardware configuration
3• Applicable to extreme environments
4• LCD screen with alarm audio for easy status and information check
5• Industrial modularization design and customizable module configuration
6• Supports remote control and monitoring, and online firmware upgrade
世纪通信 鼎利支持Powering Network Experience
No. 8, the Fifth Technology Road,
Gangwan Avenue, Zhuhai,
519085, P.R. China
0756-3626100 Fax : 0756-3391900Tel :
Email :