Pigment printing 130103023

30
PIGMENT PRINTING FEROZ MAHMUD DEPT.OF TEXTILE ENGINEERING

Transcript of Pigment printing 130103023

Page 1: Pigment printing 130103023

PIGMENT PRINTING

FEROZ MAHMUDDEPT.OF TEXTILE

ENGINEERING

Page 2: Pigment printing 130103023

TEXTILE PRINTING:

It can be described as a localized form of dyeing, applying colorant to selected areas of the fabric to build up the design.

Textile printing, like textile dyeing, is a process for applying color to a substrate.

However, instead of coloring the whole substrate (cloth, carpet or yarn) as in dyeing, print color is applied only to defined areas to obtain the desired pattern.

Dyeing can hold single color where as printing can handle 12 to 20 colors in single go.

Page 3: Pigment printing 130103023

PIGMENT PRINTING:“A fabric that has been printed with a paste made of an insoluble pigment mixed with a

binder and a thickener.” In pigment printing, insoluble pigments, which

have no affinity for the fiber, are fixed on to the textile with binding agents in the pattern required.

Pigment printing is most economical printing process and allows maximum output of goods because of the elimination of washing off, quick sampling and high printing speeds.

It is not possible to apply it directly on the fabric. Binder must be used to apply the pigment dye on the fabric.

Page 4: Pigment printing 130103023

Printing can simply be classified according to technique, fiber type and dye class:

Page 5: Pigment printing 130103023

As, Chart Describes major portion of

textile printing is covered by Pigment Printing so it becomes an important topic to discuss.

To print on different substrates different chemistry is required for example printing on natural cellulose is majorly done with reactive dyes.

Polyester is printed with disperse dyes.

Cotton is printed with sulfur dyes. But, Pigment printing can be applied

to various type of fibers like Cotton, Polyester, Blend PC, Polyamide and many more.

Page 6: Pigment printing 130103023

PIGMENT PRINTING PROCESS

Pigment printing has gained much importance today and for some fibers (e.g. cellulose fibers) is by far the most commonly applied technique. Pigments can be used on almost all types of textile substrates and, thanks to increased performance of modern auxiliaries, it is now possible to obtain high-quality printing using this technique.

Pigment printing pastes contain a thickening agent, a binder and, if necessary, other auxiliaries such as fixing agents, plasticizers, defoamers, etc.

Page 7: Pigment printing 130103023

PIGMENT PRINTING PROCESS

White spirit-based emulsions, used in the past as thickening systems, are used only occasionally today (mainly half-emulsion thickeners).

After applying the printing paste, the fabric is dried and then the pigment is normally fixed with hot air (depending on the type of binder in the formulation, fixation can also be achieved by storage at 20°C for a few days).

The advantage of pigment printing is that the process can be done without subsequent washing (which, in turn, is needed for most of the other printing techniques).

Page 8: Pigment printing 130103023

PIGMENT PRINTING PROCESS:

 Pre-treatment↓

Printing (with binder and fixer) (roller/rotary printing) 

↓Drying ( Drying the printed fabric)

(90-100%/110-120°C) (dryer) 

↓Curing  (Fixation of the printed dye or pigment)

(cotton 140-160°C/110-120°C 3-5 min) (polyester 160-220°C , 30-60s) 

(stenter) 

Page 9: Pigment printing 130103023

STEPS OF PRINTING PROCESS:

A Typical Printing Process Involves the Following Steps:

Color paste preparationwhen printing textiles, the dye or pigment is not in an aqueous liquor, instead, it is usually finely dispersed in a printing paste, in high concentration.

Textile PrintingThe dye or pigment paste is applied to the substrate using different techniques, which are discussed below.

Page 10: Pigment printing 130103023

STEPS OF PRINTING PROCESS:

FixationImmediately after printing, the fabric is dried and then the prints are fixed mainly with steam or hot air (for pigments). (Conversion of binder monomer into polymer).

After-treatmentthis final operation consists in washing and drying the fabric (it is not necessary when printing with pigments or with other particular techniques such as transfer printing).

Page 11: Pigment printing 130103023

CLASSIFICATION OF PIGMENTS:

According to origin Natural/Mineral: Iron ores, clays, chalk etc Synthetic/chemical: white lead, ZnO, TiO2 and large

number of inorganic and organic color According to Reactivity

Reactive pigment: some pigments on account of the chemical character react with oil, fatty acids and soaps. These are called reactive pigments e.g. ZnO, red lead

Inert pigment: TiO2 According to Chemical Nature

Organic pigment: Azo pigment Diarylide orange and yellows Phthalocyanine Hasna yellow

Inorganic pigment

Page 12: Pigment printing 130103023

PRINTING PROCESS:

Printing process may be further divided into two steps:

1. Preparation of the print paste.2. Printing the fabric.

Page 13: Pigment printing 130103023

TYPICAL RECIPE FOR PIGMENT

PRINTING:Soft Water                          700

g/KgAnti Foamer                              1g/KgBinder                              

  200g/KgFixative                                    10g/KgSoftener                                    10g/KgUrea                                        

50g/KgThickener                           

  15g/Kg

Total                                     1 Kg

Page 14: Pigment printing 130103023

COMPONENTS OF PIGMENT

PRINTING:A pigment printing system consists of three essential

components: Pigment dispersion: Specific pigments are treated

in a grinding mill in the presence of suitable non-ionic surfactants. A particle size of 0.1-3 μm is typical. Generally, the pigment pastes are aqueous based and contain the dispersing agent, humectants (to prevent evaporation and drying out).

Binders and cross-linking agents (polymers): The binders used in pigment printing systems are film-forming substances made up of long-chain macro molecules which, when heated with a suitable acid-donating catalyst, form a three-dimensional structure in the pigment.

Thickeners and auxiliary agents: These give the required print thickening power (rheology).

Page 15: Pigment printing 130103023

BINDERS: Binders plays key role in pigment

printing. Binder are monomers which on heating get converted into polymers. Just by simple heating, no pressure , no steaming , no electricity.

Binders{Monomer}----Heat---> Plasticizer/Plastic{Polymer}

Binders form plastic but, its too soft and transparent that its difficult to see it but we can feel its harshness on the fabric. That’s why pigment printed fabric have more harshness when compared to other printing techniques.

Page 16: Pigment printing 130103023

BINDERS: Binder actually hold the pigment

color and sandwich it between fabric surface and plastic coating and this coating help color to stick there and stand with high and severe conditions.

In addition to binder an other component is also added to the textile pigment printing paste and that is called fixer. Fixers are mostly formaldehyde based, which helps in strengthening of binder to hold on pigment.

Page 17: Pigment printing 130103023

The working of binder that how binder sandwiches pigment in between itself and substrate. As, nearly 90 to 95% of pigment is successfully entrapped in between so no need of washing as it was required in case of reactive printing to wash off unfixed dye. This is big advantage of pigment over other techniques which make it economical.

Page 18: Pigment printing 130103023

PRINTING METHODS:A decorative pattern or design is

usually applied to constructed fabric by: 

1. Screen printing methoda. Rotary screen methodsb. Flat screen methods

2. Roller printing method

Page 19: Pigment printing 130103023

SCREEN PRINTING METHOD:

Screen printing is by far the most popular technology in use today.

Screen printing consists of three elements: The screen which is the image carrier; The squeegee; Ink.

The screen printing process uses a porous mesh stretched tightly over a frame made of wood or metal.

Proper tension is essential for accurate color registration.

The mesh is made of porous fabric or stainless steel.

A stencil is produced on the screen either manually or photochemically.

The stencil defines the image to be printed in other printing technologies this would be referred to as the image plate.

Page 20: Pigment printing 130103023

FLAT BED SCREEN PRINTING:

For each color in the print design, a separate screen must be constructed or engraved.

The modern flat-bed screen-printing machine consists of an in-feed device, a glue trough, a rotating continuous flat rubber blanket, flat-bed print table harnesses to lift and lower the flat screens, and a double-blade squeegee trough.

The in-feed device allows for precise straight feeding of the textile fabric onto the rubber blanket.

As the cloth is fed to the machine, it is lightly glued to the blanket to prevent any shifting of fabric or distortion during the printing process.

Page 21: Pigment printing 130103023

FLAT BED SCREEN

PRINTING: The blanket carries the fabric under the

screens, which are in the raised position. Once under the screens, the fabric stops, the screens are lowered, and an automatic squeegee trough moves across each screen, pushing print paste through the design or open areas of the screens.

Remember, there is one screen for each color in the pattern.

The screens are raised, the blanket precisely moves the fabric to the next color, and the process is repeated.

Once each color has been applied, the fabric is removed from the blanket and then processed through the required fixation process.

Page 22: Pigment printing 130103023

FLAT BED SCREEN PRINTING:

The rubber blanket is continuously washed, dried, and rotated back to the fabric in-feed area.

The flat-bed screen process is a semi-continuous, start-stop operation. Flat screen machines are used today mostly in printing terry towels.

Can produce as many as 25,000 impressions without significant degradation of the image.

The process is slow with production speeds in the range of 15-25 yards per minute.

Page 23: Pigment printing 130103023
Page 24: Pigment printing 130103023

ROTARY SCREEN PRINTING:

Rotary screen printing is so named because it uses a cylindrical screen that rotates in a fixed position rather than a flat screen that is raised and lowered over the same print location.

Rotary presses place the squeegee within the screen. These machines are designed for roll-to-roll  printing on fabric ranging from narrow  to wide-format  textiles.

In rotary printing, the fabric travels at a consistent speed between the screen and a steel or rubber impression roller immediately below the screen. (The impression roller serves the same function as the press bed on a flatbed press.)

As the fabric passes through the rotary unit, the screen spins at a rate that identically matches the speed of substrate movement.

Page 25: Pigment printing 130103023

ROTARY SCREEN PRINTING:

The squeegee on a rotary press is in a fixed position with its edge making contact with the inside surface of the screen precisely at the point where the screen, substrate, and impression roller come together .

Ink is automatically fed into the center of the screen and collects in a wedge-shaped “well” formed by the leading side of the squeegee and the screen’s interior surface.

The motion of the screen causes this bead of ink to roll, which forces ink into stencil openings, essentially flooding the screen without requiring a floodbar.

The squeegee then shears the ink as the stencil and substrate come into contact, allowing the ink to transfer cleanly to the material.

By converting the screen-printing process from semi-continuous to continuous, higher production speeds are obtained than in flat bed printing. Typical speeds are from 50-120 yards per minute

Page 26: Pigment printing 130103023
Page 27: Pigment printing 130103023

ROTARY SCREEN PRINTING MACHINE

Page 28: Pigment printing 130103023

ADVANTAGES OF PIGMENT PRINTING:

Applicable to natural and synthetic fiber. Pigment printing is most economical printing

process and allows maximum output of goods because of the elimination of washing off, quick sampling and high printing speeds.

The advantage of pigment printing is that the process can be done without subsequent washing.

Simple technical process without wet after treatment.

Pigment printing allows maximum output of goods.

Fastness properties are good to average. Well defined design can be produced by pigment

printing.

Page 29: Pigment printing 130103023

DISADVANTAGES OF PIGMENT PRINTING:

Pigment printed textile wears are not comfortable to wear.

Handling properties of the pigment printing is rough because of having excessive cross linking agents.

It is not possible to apply it directly on the fabric. Binder must be used to apply the pigment dye on the fabric. Thus, a coat is created on the surface of the fabric. 

Pigments are sensitible to crushing during roller printing.

Rubbing fastness is medium. Pigments are completely fast to dry cleaning.

Page 30: Pigment printing 130103023