Physics of Bridges
description
Transcript of Physics of Bridges
![Page 1: Physics of Bridges](https://reader036.fdocuments.us/reader036/viewer/2022062520/568164e9550346895dd7551a/html5/thumbnails/1.jpg)
Physics of BridgesMr. HoaSTEM 2014
![Page 2: Physics of Bridges](https://reader036.fdocuments.us/reader036/viewer/2022062520/568164e9550346895dd7551a/html5/thumbnails/2.jpg)
Beam BridgeOne of the simplest bridges
What are the forces acting on a beam bridge?• There is the
weight of the bridge
• The reaction from the supports
![Page 3: Physics of Bridges](https://reader036.fdocuments.us/reader036/viewer/2022062520/568164e9550346895dd7551a/html5/thumbnails/3.jpg)
Forces on a beam bridge
Here the red represents the weight of the bridge and the blue represents the reaction of the supportsAssuming the weight is in the center, the supports will each have the same reaction
![Page 4: Physics of Bridges](https://reader036.fdocuments.us/reader036/viewer/2022062520/568164e9550346895dd7551a/html5/thumbnails/4.jpg)
• With all bridges, there is only a certain weight or load that the bridge can support
• This is due to the materials and the way the forces are acted upon the bridge
![Page 5: Physics of Bridges](https://reader036.fdocuments.us/reader036/viewer/2022062520/568164e9550346895dd7551a/html5/thumbnails/5.jpg)
Arch BridgeThe arch bridge is one of the most natural bridgesIt is also the best example of dissipation
![Page 6: Physics of Bridges](https://reader036.fdocuments.us/reader036/viewer/2022062520/568164e9550346895dd7551a/html5/thumbnails/6.jpg)
• In a arch bridge, everything is under compression
• It is the compression that actually holds the bridge up
• In the picture above, you can see how the compression is being dissipated all the way to the end of the bridge where eventually all the forces get transferred to the ground
![Page 7: Physics of Bridges](https://reader036.fdocuments.us/reader036/viewer/2022062520/568164e9550346895dd7551a/html5/thumbnails/7.jpg)
ArchesHere is one more look at the compression lines of an arch
![Page 8: Physics of Bridges](https://reader036.fdocuments.us/reader036/viewer/2022062520/568164e9550346895dd7551a/html5/thumbnails/8.jpg)
Truss BridgeAnother way to increase the strength of a bridge is to add trusses
What are trusses?
• A truss is a rigid framework designed to support a structure
• A truss adds stability to the beam; therefore, increasing its ability to dissipate the compression and tension forces
A truss is essentially a triangular structure
![Page 9: Physics of Bridges](https://reader036.fdocuments.us/reader036/viewer/2022062520/568164e9550346895dd7551a/html5/thumbnails/9.jpg)
TrussesLet’s take a look at a simple truss and how the forces are spread outAssume that all the triangles are equilateral trianglesThere is a mixture of both compression and tension forces and these forces are spread out across the truss
![Page 10: Physics of Bridges](https://reader036.fdocuments.us/reader036/viewer/2022062520/568164e9550346895dd7551a/html5/thumbnails/10.jpg)
• The truss can easily hold up weights, but there is a limitation
• Truss bridges are very heavy due to the massive amount of material involved in its construction
• Eventually the bridge would be so heavy, that most of the truss work is used to hold the bridge up instead of the load
![Page 11: Physics of Bridges](https://reader036.fdocuments.us/reader036/viewer/2022062520/568164e9550346895dd7551a/html5/thumbnails/11.jpg)
Suspension BridgeDue to the limitations of the truss bridge type, another bridge type is needed for long spansA suspension bridge can withstand long spans as well as a fairly decent load
![Page 12: Physics of Bridges](https://reader036.fdocuments.us/reader036/viewer/2022062520/568164e9550346895dd7551a/html5/thumbnails/12.jpg)
• A suspension bridge uses the tension of cables to hold up a load. The cables are kept under tension with the use of anchors that are held firmly to the Earth
![Page 13: Physics of Bridges](https://reader036.fdocuments.us/reader036/viewer/2022062520/568164e9550346895dd7551a/html5/thumbnails/13.jpg)
How suspension bridge works
The deck is suspended from the cables and the compression forces from the weight of the deck are transferred to the towers. Because the towers are firmly in the Earth, the forces gets dissipated into the groundThe support cables that are connected to the anchors experience tension. The cables stretch due to the weight of the bridge as well as the load it carries
![Page 14: Physics of Bridges](https://reader036.fdocuments.us/reader036/viewer/2022062520/568164e9550346895dd7551a/html5/thumbnails/14.jpg)
Cable Stayed BridgeA cable stayed bridge is a variation of the suspension bridgeLike the suspension bridge, the cable stayed bridge uses cables to hold the bridge and loads up
![Page 15: Physics of Bridges](https://reader036.fdocuments.us/reader036/viewer/2022062520/568164e9550346895dd7551a/html5/thumbnails/15.jpg)
Forces in a cable stayed
A cable stayed bridge uses the cable to hold up the deckThe tension forces in the cable are transferred to the towers where the tension forces become compression forces
![Page 16: Physics of Bridges](https://reader036.fdocuments.us/reader036/viewer/2022062520/568164e9550346895dd7551a/html5/thumbnails/16.jpg)
LimitationsWith all cable type bridges, the cable must be kept from corrosion (rust)If the bridge wants to be longer, the towers must also be higher. This can be dangerous in construction as well as during windy conditions“The bridge is only as good as the cable”… If the cable snaps, the bridge fails