Phu Tran - Rose v3 (2007)

6
Method & Diagrammed: *This is the final release of the Phu Tran Rose diagrams. There will be no more development of this rose because I feel V3 Clean Method is the most efficient way to fold this rose. I have learned a lot from V2 and implemented many changes in V3 Final. V3 Clean Method is superior than it’s V2 from a technical perspective and most importantly from the end result appeal. The rose is nearly CREASE FREE! I hope you may find my production worth while. Please give me feedbacks.* http://phucnguyen.com

Transcript of Phu Tran - Rose v3 (2007)

Page 1: Phu Tran - Rose v3 (2007)

Method & Diagrammed:

*This is the final release of the Phu Tran Rose diagrams. There will be no more development of this rose because I feel V3 Clean Method is the most efficient way to fold this rose. I have learned a lot from V2 and implemented many changes in V3 Final. V3 Clean Method is

superior than it’s V2 from a technical perspective and most importantly from the end result appeal. The rose is nearly CREASE FREE! I hope you may find my production worth while. Please give me feedbacks.*

http://phucnguyen.com

Page 2: Phu Tran - Rose v3 (2007)

1.

2.3.

4.

6.

5.

10.

9.

8.

7.

Use the behind edge as reference.

11.

Repeat in the other direction.

12.

Rotate & Match

Open Up

Repeat 1-6 in opposite direction.

1

Author: Phu Tran

Method Development & Diagrammed:Phuc NguyenV.3: Clean Method (Final)September 5, 2007

Page 3: Phu Tran - Rose v3 (2007)

Fold up to the “dots”. DO NOT flatten model! Align to center crease line. Crease where indicated.

Repeat 13-16 other sides.

Release the flap underneath.

Form the 4 shapes. Pick up the model for easier formation.

Release the flaps underneath.

Repeat to other sides.

Align the dots.

Bring edge to dot.

Valley fold diagonals.

Bring edge to dot.

13. 14.

15.

16.

17.18.

19.

20.

21.

22.

23.

25.

24.

Spread and flatten model.

26.

2

Page 4: Phu Tran - Rose v3 (2007)

27.

28.

29.

30.31.

32.

33.

34.

Fold as indicated. Repeat to other flaps.

Fold up the mountain creases and twirl as indicated by the arrows to make the model 3D.

…in progress.

…in progress.

Spread open the flap.

Sink in the folds.

35.

3

Notice the picture above. Repeat to other flaps.

Page 5: Phu Tran - Rose v3 (2007)

4

A. B. C. D.

35.

It is easier and more effective to just “pinch” in the folds here. Sink in. Mountain fold then RELEASE paper to sink.

F.

Sink in.

A.

36. 37.

38.

39.

...details

Make sure all creases are FIRM. Reinforces model.

Page 6: Phu Tran - Rose v3 (2007)

Shape!

Finished!

5

Repeat to other flaps.

40.41.

B.

A.

Roll as TIGHTLY as possible from corner A to B.

B.

A.

ROSE STEM ROSE CALYX

http://phucnguyen.com

ROSE LEAVES{Kawasaki Leaves}