Phoenix DS MagScan
-
Upload
richard-harold-morales-soza -
Category
Documents
-
view
218 -
download
0
description
Transcript of Phoenix DS MagScan
-
MagScan Dual Axis Motorised Scanner
MagScan configured for Girth Weld Inspection
MagScan is a compact magnetic dual axis motorised scanner and the ideal tool for corrosion mapping. It can be used on flat plate and pipes as small as 4" O/D. MagScan can hold up to six ultrasonic probes and is also suitable for phased array and TOFD inspections.
MagScan is the ideal tool for corrosion mapping. The dual axis function allows for inspections such as raster scanning and for testing pipe to elbow welds, and any flat or curved surfaces. MagScan is fully encoded and offers a range of stroke lengths.
Local motion control for the MagScan is via PC Link software package. PC Link allows a choice of scan patterns, movement parameters, acceleration and speed settings. Other options available for the MagScan include the use of a chain guide and peristalitic pump.
MagScan corrosion mapping on 10" OD pipe
MagScan Scanning on painted pipe using 2 off PA probes
Features Phased Array, Corrosion Mapping and TOFD assessment
Simultaneous phased array and TOFD inspection
High speed weld inspection (up to 40mm/sec)
Inspects pipe diameters from 4O/D up to flat
Two axes for raster scan inspection Operates in any orientation Servo constant speed control Compact (227mm x 198mm x 126mm) and lightweight (5kg)
Holds up to 6 probes Quick release probe adjustment Probes independently sprung and gimballed
Probes can be positioned to any PCS Integrated couplant and probe manifold
Strong magnetic wheels allow for use on painted surfaces
Scanning arm adjustable up to 250mm Mounting rails for ancillary equipment e.g. TOFD pre-amp
Local motion control via PC Link software package
IP66 rated ASME code compliant For use with any manufacturers probes or wedges and instrumentation or motor controller
Phoenix Inspection Systems Limited | www.phoenixisl.com
-
MagScan Standard KitCorrosion Mapping Package
1 x MagScan with rubber plate (incl. irrigation tubing and Y pieces)
1 x 10m power umbilical cable 1 x Trombone extension arm 1 x low profile TOFD tool-post 1 x Tool-post clamp 1 x ATC 4/10 4MHz, 10mm twin crystal
probe
1 x 10m Twin Lemo 00 Lemo 00 UT cable
1 x MCPA (unless being used with TD Focus Scan)
TOFD Inspection Package
1 x MagScan with rubber plate (incl. irrigation tubing and Y pieces)
1 x 10m power umbilical cable 1 x Front mounting rail 2 x Standard 30x30mm TOFD tool-posts 1 x 10m Twin Lemo 00 Lemo 00 UT
cable
1 x MCPA
Phased array Inspection Package
1 x MagScan with rubber plate (incl. irrigation tubing and Y pieces)
1 x 10m power umbilical cable 1 x Front mounting rail 2 x Phased array tool-posts 1 x MCPA
TOFD & Phased array Inspection Package
1 x MagScan with rubber plate (incl. irrigation tubing and Y pieces)
1 x 10m power umbilical cable 1 x Front mounting rail 2 x Standard 30x30mm TOFD tool-posts 1 x 10m Twin Lemo 00 Lemo 00 UT
cable
2 x Phased array tool-posts 1 x MCPA
MagScan
Accessories HIC Adapter Trombone extension arm Guide Chain
Peristaltic pump Low profile 30x30mm TOFD tool-post
Standard 30x30mm TOFD tool-post Phased array tool-post
MagScan configured for TOFD inspectionMagScan performing a HIC (Hydrogen induced cracking) inspection using two TOFD probes
Phoenix Inspection Systems Limited and its associated logo is a registered trade mark.
Phoenix Inspection Systems Limited, Dalton House, 40 Hardwick Grange, Warrington, WA1 4RF, United Kingdomt: +44 (0) 1925 826000 | f: +44 (0) 1925 838788 | e: [email protected] | www.phoenixisl.com
Phoenix Inspection Systems Limited is a Nova Instruments company. For further information visit www.novaic.com
Phoenix Inspection Systems Limited has a policy of continuous development therefore reserves the right to change products, specifications and pricing without forward notice.Actual products may differ from those presented herein. The information in this data sheet is accurate at time of publication.