Philmore pg.193-208 Catalog

193

BATTERY HOLDERSAA CELL HOLDERS

No. BH3311

For (3) AA cell (UM-3)W/Cover Plus On-Off switch, 6” Lead Wire Connection

No. BH341

For (4) AA cell (UM-3)With Standard Snap Connection

No. BH3411

For (4) AA cell (UM-3)W/Cover Plus On-Off switch, 6” Lead Wire Connection

No. BH343


No. BH344

For (4) AA cell (UM-3)With Solder Lug Connection

No. BH3611

For (6) AA cell (UM-3)With Snap Cover, 6” LeadWire Connection

No. BH362S


No. BH363


No. BH381M

For (8) AA cell (UM-3)With Solder Lug Connection And Mounting Ears

No. BH383


No. BH3103

For (10) AA cell (UM-3)With Solder Lug Connection

194

BATTERY HOLDERS

No. BH411

For (1) AAA cell (UM-4)With Solder Lug Connection

No. BH411P

For (1) AAA cell (UM-4)With PC Board Mounting

No. BH421


No. BH4211

For (2) AAA cell (UM-4)With Cover Plus On-OffSwitch, 6” Lead Wire

No. BH431


No. BH4311


No. BH441P


No. BH441S

For (4) AAA cell (UM-4)With Standard Snap Connection

AAA CELL HOLDERS

No. BH421P


BATTERY HOLDERS

AAA, N, 9V, 1/2 AA CELL HOLDERS

No. BH4411


No. BH443


No. BH443S

For (4) AAA cell (UM-4)With Standard Snap Connection

No. BH511

For (1) N cell (UM-5)With Solder Lug Connection

No. BH511P

For (1) N cell (UM-5)With PC Board Mounting

No. BH521

For (2) N cell (UM-5)With Solder Lug Connection

No. BH102

For (1) 9 Volt batteryAluminum Holder With Solder Lug Cnnection

No. BH910

For (1) 9 Volt batteryWith Solder Lug Cnnection

No. BH980

For (1) 9 Volt batteryMetal Clip Holder

No. BH531

For (1) 1/2 AA (3.6V Lithium Battery)With PC Board Mountig

No. BH541

For (1) 1/2 AA (3.6V Lithium Battery)With Solder Lug Connection And Switch

195

196

No. BH2020

Coin cell Holder, For CR1220 &Other 12.5mm x 2mm Coin Cells, PCB Mount

No. BH2025

Coin cell Holder, For CR1225 &Other 12.5mm x 2.5mm Coin Cells, PCB Mount

No. BH2032

Coin cell Holder, For CR2032 &Other 20mm x 3.2mm Coin Cells, PCB Mount

No. BH2038

Coin cell Holder, For CR2325 &Other 23mm x 2.5mm Coin Cells, PCB Mount

BATTERY HOLDERS, COVERS

COIN CELL HOLDERS

No. BH2040

Vertical Coin cell Holder, For CR2032 &Other 20mm x 3.2mm Coin Cells PCB Mount

No. BC9 - 3” Leads, 5Pc. / Pk.No. BC100 - 10” Leads, 2Pc. / Pk.

9V Battery Snap, Vinyl Cover

No. BC109 - 6” Leads, 2Pc. / Pk

“T” Shape 9V Battery Snap, Vinyl Cover

No. BC120 - 6” Leads, 2Pc. / Pk

9V Battery Snap, Molded Plastic Cover

No. BH129 - 6” Leads, 2Pc. / Pk

“T” Shape 9V Battery Snap, Molded Plastic Cover

Male and female batttery snaps that mate with all of the battery holders and withstandard 9V batteries. 10” lead wire color coded to match polarity of 9V snap onbattery holder.

Philmore No. Description

No. BC7B MALE SNAP WITH 10”BLACK LEAD WIRE (BULK)

No. BC8B FEMALE SNAP WITH 10”RED LEAD WIRE (BULK)

No. BC6 2 PAIR OF MALE ANDFEMALE SNAP W/10”WIRE LEAD. (PACKAGED)

No. 2090 - Bulk PackedNo. 2090-25 - Display Package of 25

Fahnstock Clip3/4” Long, .144” Hole (No. 6) Brass Nickel Plated

197

TERMINALS / TERMINAL BLOCKS / KNOBS

TERMINAL BLOCKSA terminal block designed to be end-stackable on a PC board so that thedesigner may have any number of contacts needed. The design providessecure wire protection for a broad range of wire sizes (up to 14 ga. max).The housing is molded of 94V-0 fire retardent plastic. Six pieces per pack-age; available in bulk, add “B” suffix to part number. (i.e. TB132B for Bulk)

Housing: Polymide 66 resin, blueTerminals: 0.9 x 0.9 Brass, tin platedScrews: M2.6 x 0.45P, steel, zinc platedWire cage: Brass, Nickle plated

Rated: 10 Amp. 300 VACTemperature rating: -55°C to + 125°CWire range: 14 AWG max.Dielectric Strength: 2000 VAC min.

for 1 minuteInsulation Resistance: 500 M ohm min.

at 500 VDCPitch: 5 mmNumber of pole: 2, 3

STRAIGHT TYPE RIGHT ANGLE TYPENo. TB132 - 2 Pos. Pkg./6 No. TB142 - 2 Pos. Pkg./6No. TB133 - 3 Pos. Pkg./6 N0. TB143 - 3 Pos. Pkg./6

Fluted with skirt indicator line on top .75” Dia., .50” High

Color: BlackNo. 3010

Fluted with taper skirt indicator line on top .94” Dia., .60” High

Color: BlackNo. 3035

Straight knurl with arrowhead indicator on top .82” Dia., .50” High

Color: Black with Aluminumtop inlay

No. 3055

Straight Knurl 0-9 num-bers on

aluminum skirt1.15” Dia., .70” High

Color: Black withAluminum top inlay

No. 3020

Straight knurl 0-10 num-bers on

aluminum skirt1.46” Dia., .60” High

Color: Black withAluminum top inlay

No. 3045

Control pointer knob withindicator line on top & side

1” Dia., .60” HighColor: BlackNo. 3050

Straight knurl pointer indi-cator line on side pointer

.54” Dia., .48” HighColor: Black with Aluminum

top inlayNo. 3060

Fluted grip with indicator line

Color: Black with Aluminumtop inlay

.60” Dia., .46” HighNo. 3025

.92” Dia., .62” HighNo.3030

Ribbed with skirt indicator line

Color: Black withAluminum top inlay.80” Dia., .67” High

No. 30151.35” Dia., .86” High

No.3040

KNOBSBlack bakelite material, brass insert for 1/4” shaft with set screw.

SPECIFICATIONS

Black pointer knob withindicator line. 1.25” long

No. 277AP

Straight knurl, aluminumskirt with black indicator

arrow. 1.375” DIA., .56” highColor; Black with aluminum

top inlay.No.337

For bulk pack add suffix letter “B”

Precision Tuning VERNIER DIAL CONTROL KNOBS

A vernier dial control knob will provide smooth andprecise tuning for either a potentiometer or variable capaci-tor. Planetary drive provides 8 to 1 ratio, allowing for veryfine adjustment of standard controls. The metal dial plate iscalibrated by etching and paint filling on brushed satin finishfor a very attractive appearance. Knob is calibrated over180 degrees of turn, reading from zero to maximum settingby clockwise rotation. Fits standard 1/4” control shafts andmounts on surface of cabinet or chassis. Very useful withany circuit where fine “tuning” is going to make life easier.

Part no. Diameter Calibration

S36 1 1/2” 0 to 10 S38 1-1/2” 0 to 100S50 2” 0 to 100

No. S50

Rear View

198

COOLING FANS & ACCESSORIES

60 mm (2.36”) Square Cooling FansThese cooling fans are quite popular in electronic equipment. They are availablein several voltages and CFM ( cubic feet per minute) air flow types. The fans havebrushless DC motors which are polarity protected.

Specifications:Motor: DC BrushlessCase & Impellers: 94V-0 PlasticOperating Temp.: -20o C - 80o C Ball Bearing

-10o C- 50o C Sleeve BearingLife Expectancy: 70,000 HoursUL, CUL, CSA Approvals

Part Thickness Speed Max. Noise Bearing Voltage CurrentNumber mm RPM CFM dB Style (ma)

70-6128 15 3900 15 28 Ball 12V DC 140 70-6012 25 4000 24 29 Sleeve 12V DC 140

80 mm (3.15”) Square Cooling FansThese cooling fans are quite popular in electronic equipment including copiers, and comput-ers. They are available in several voltages and CFM ( cubic feet per minute) air flow types.The fans are available with brushless DC or AC motors which are polarity protected.

Specifications:Motor: AC or DC BrushlessCase & Impellers: 94V-0 PlasticOperating Temp.: -20o C - 80o C Ball Bearing



70-8275 25 3200 29 34 Sleeve 12V DC 19070-8128 25 3000 22 35 Ball 12V DC 120 70-6275 25 3000 24 28 Ball 120V AC 140

Plastic Fan Filter KitsThese kits are designed to reduce noise, and remove impu-rities up to 45 PPI (Parts Per Inch). These kits consist ofthree parts. A Fan Guard, Media Filter, and a Retainer.

Specifications:Guard;

UL94V-0 PlasticUL .25 SpacingReduces Noise Level

Media Filter;PU (polyurethane) Foam45 PPIEasy Clean

Retainer;UL94V-0 PlasticLow Air ResistanceSnap-on Installation

Part Fan Size PPINumber (mm) Filtering

70-5340 40mm 4570-5360 60mm 4570-5380 80mm 4570-5392 92mm 4570-5312 120mm 45

Part Fan DimensionsNumber Size Dia. Mt. Centers

70-6340 40mm 1.24” 1.26”70-6360 60mm 1.97” 2.09”70-6280 80mm 2.81” 3.02”70-6330 92mm 3.25” 3.52”70-6415 120mm 4.125” 4.31”

Fan GuardsThese guards are designed to fit the fans Philmore offers aswell as other standard size models. They are to be used tokeep foreign objects from interfering with the operation ofthe fan as well as for safety purposes.

Specifications:Nickel Chrome Steel WireWelded JointsMeets UL & CSA Standards

40 mm (1.56”) Square Cooling FansThese miniature cooling fans are quite popular in small electronic equipment includingcomputers where heat is a problem or can cause problems. The fans are available withbrushless DC motors which are polarity protected.

Specifications:Motor: DC Brushless

Case & Impeller: 94V-0 PlasticOperating Temp.: -20o C - 80o C Ball Bearing



70-4012 10 6500 7.7 29 Sleeve 12V DC 13070-4128 10 6500 7.7 29 Ball 12V DC 130

Fan Power CordsThese fan power cords fit

Philmore models and other com-petitor fans with plug-in termi-nals. Philmore offers severalconfigurations for your conven-ience.

No. 70-6420 - Straight 42” LongNo. 70-6424 - 90o 24” longNo. 70-6436 - 45o 36” long

No. 70-6420 No. 70-6424 No. 70-6436

199

COOLING FANS & ACCESSORIES


70-8415 25 2400 69 35 Sleeve 12V DC 34070-1128 25 3000 86 42 Ball 12V DC 240 70-1248 25 3000 86 42 Ball 24V DC 24070-6412 25 2900 105 33 Ball 120V AC 140

Specifications:Motor: DC Brushless

Case & Impeller: 94V-0 PlasticOperating Temp.: -20o C - 80o C Ball Bearing


120 mm (4.72”) Square Cooling FansThese cooling fans are quite popular in electronic equipment. They are available in severalvoltages and CFM ( cubic feet per minute) air flow types. The fans have brushless DC motorswhich are polarity protected.

Specifications:Motor: AC or DC BrushlessCase & Impellers: 94V-0 PlasticOperating Temp.: -20o C - 80o C Ball Bearing



70-8325 25 2400 36 39 Sleeve 12V DC 22070-9128 25 3000 50 33 Ball 24V DC 180 70-6325 25 2900 31 30 Ball 120V AC 140

92 mm (3.62”) Square Cooling FansThese cooling fans are quite popular in electronic equipment including copiers, computers,

& data processing. They are available in several voltages and CFM (cubic feet per minute)air flow types. The fans are available with brushless DC or AC motors which are polarityprotected.

At the speeds that computers run today it is very importantthat they keep cool or there could be problems with operationand memory loss. Philmore offers the most popular sizes ofCPU cooling fans. Each have a heat sink and are easilyinstalled by the user.

CPU Cooling Fan

Type 486 CPU Cooling FanSpecifications:

486 Style CPU FanSpeeds up to 100 MHz12V DC @ 60ma6000 RPM3.8 CFMSize: 44.6 mm X 44.6 mm

No 70-586 CPU Cooling Fan 12V DC

586 & Pentium CPU Cooling Fan

No. 70-486 CPU Cooling Fan 12V DC

Specifications:586 & Pentium ChipsSpeeds up to 233 MHz12V DC @ 65ma4500 RPM8.5 CFMSize: 53 mm X 53 mm

AMD K6-II CPU COOLING FANThis CPU cooler is designed to fit the AMD K6-II processor with speeds up

to 550MHz. The device has low acoustical noise, quick easy installation, anda ball bearing motor.

Features>Fan size 50 x 50 x 10 mm>Thermal interface: Chomerics T-725>Operation Voltage: 7-12VDC>Operating Current: 1.32W>Noise Level: <30.4dB>Rated Speed: 4800 RPM>Air Flow: 11.5CFM>Electrical Connection: 4 pin plug>Dimensions w/ heat sink:50x50x42mm

No. 70-8156 AMD K6-II CPU Cooler

AMD Athlon PGA CPU COOLING FAN

This CPU cooler is designed to fit the AMD Athlon processor with speeds upto 1.3GHz. The device has low acoustical noise, quick easy installation, anda ball bearing motor.

Features>Fan size 60 x 60 x 10 mm>Thermal interface: Chomerics T-725>Operation Voltage: 10.2 - 13.8VDC>Operating Current: 2.04W>Noise Level: <31.52dB>Rated Speed: 4000 RPM>Air Flow: 15.6CFM>Electrical Connection: 4 pin plug>Dimensions w/ heat sink: 60x60x52mm

No. 70-8154 AMD Athlon PGA CPU Cooler

Intel Pentium4 CPU COOLING FAN

This CPU cooler is designed to fit the Intel Pentium4 proces-sor with speeds up to 1.5GHz. The device has low acousticalnoise, quick easy installation, and aball bearing motor.

Features>Fan size 60 x 60 x 10 mm>Thermal interface: Furon C1060>Operation Voltage: 10.2 - 13.8VDC>Operating Current: 1.8W>Noise Level: <31.52dB>Rated Speed: 4000 RPM>Air Flow: 15.6CFM>Electrical Connection: 4 pin plug>Dimensions w/ heat sink: 89x63x45.5mm

No. 70-8152 Intel Pentium4 CPU Cooler

200

STRAIN RELIEFS & WIRE

HOOKUP or LEAD WIRE22 gauge, solid copper hookup wire with PVC insulation; UL list-ed 1007/1569. This is the standard at board level and also fits ourPrototype Boards, both solderless and solder types. Supplied in25 foot hanks in various colors and also in an assortment.

SPECIFICATIONS:UL 1007/1569

Insulation:.016” thk. PVC 105oC 300-volts nominal O.D. .0626”

No. 12-2211 - black No. 12-2214 - white No. 12-2216 - redNo. 12-2217 - greenNo. 12-2218 - yellowNo. 12-2276 - 5 piece kit, 1 each of 5 colors

MAGNET WIRE

Part No.

12-123412-123212-123012-122812-1226

AWGSize3432302826

Approx. Footageper 1/2 lb. spool

4050 feet2510 feet1640 feet1032 feet650 feet

Part No.

12-122412-122212-122012-121812-1216

AWGSize2422201816

Approx. Footageper 1/2 lb. spool

408 feet251 feet160 feet101 feet62 feet

Commonly used for winding R.F.coils and transformers and generallab or school classroom assembly.This is a standard round, pure cop-per wire with a polyimide enamelinner-coat and polyurethane overcoat; Thermo Class 130. The insu-lation will stand up and not crackduring winding of tight coils, highspeed winding etc..

UL Listed; Sizes for most popular AC power cords. Recognized under Component Program of Underwriters’Laboratories File No. E-10793. Certified by Canadian Standards Assoc. File No. LR-66162.This series of AC cord bushing provides the most accepted method of securing AC power cords at the point wherethey enter/exit the chassis or cabinet. These bushings are generally regarded as permanent and will prevent dam-age to the wire as well as securing the wire against any possible in-out motion.Select the type needed first by wire type and gauge and then the maximum panel thickness. In cases where thewire is a special, not listed in the chart, use the approximate wire size column.Molded of Nylon; the two pieces of these strain reliefs are permanently connected by an integral tether to preventthem from becoming separated.Part no. shown is for one package containing ten pieces. For bulk package add a “B” to the end of number andorder in standard package multiples of 50 pieces.

PartNumber

65-1000

65-1010

65-1015

65-1020

65-1025

65-1030

65-1035

65-1040

65-1045

65-1050

65-105565-1055

65-106065-1060

65-1070

Dim.D

.406”

.406”

.406”

.406”

.433”

.433”

.583”

.583”

.583”

.583”

.748”

.748”

.818”

Max.“Thk.F

.0625”

.098”

.0625”

.098”

.0625”

.098”

.0625”

.125”

.0625”

.125”

.063”

.125”

.125”

HoleB

.390”

.390”

.465”

.465”

.452”

.452”

.55”

.55”

.55”

.55”

.660”

.660”

.750”

HoleA

.433”

.433”

.5-.515”

.5-.515”

.5-.515”

.5-.515”

.625”

.625”

.625”

.625”

.780”

.750”

.780”

.750”

.750”

Approx.Wire Size

.118x.220”

.118x.220”

.150x.300”

.150x.300”

.25-.291”

.25-.291”

.30”

.30”

.320-.362”

.320-.362”

.433”.362-.413”

.433”.362-.413”

.472”-.598”

UL WireType

SPT-1

SPT-1

SPT-2

SPT-2

SVI SVT

SVI SVT

SJT-18/3

SJT-18/3

SJT-16/3

SJT-16/3

SJT-14/3SJT-14/3

SJT-14/3SJT-14/3

SJT-12/3

WireShape

Flat

Flat

Flat

Flat

Round

Round

Round

Round

Round

Round

RoundRound

RoundRound

Round

STRAIGHT-THROUGH STRAIN RELIEF BUSHINGS

Maximum Chassis ThicknessPart actually has

additional clearance.

Mounting Hole

STRAIN RELIEF TOOL No. 63-640

High quality assembly tool for Nylon strain reliefs. Adjustable for all Philmore & other Heyco- Type strain relief bushings, that assemble into holes up to 7/8” diameter. Spring loadedaction (replaces Philmore WS40).

PHILMORE STRAIN RELIEF TOOL

No. 63-640

201

SPECIFICATIONSSTRANDED TINNED COPPER

PVC INSULATION (10 COLORS) .016”UL STYLE 1007/1569 VM-1

CSA TR-64TEMPERATURE -40 to 105° C.

Rated 300 volts

Philmore Hook-up WireUL Style 1007/1569

Insulated copper wireSolid and stranded types.

Philmore offers all of the most called for gauges in UL listed, 300volt hook-up wire for use in electronic and electrical circuits. Ten col-ors in wire gauges 26 through 16 AWG and your choice of 25 or 100foot spools.

Color 25 ft. Spool 100 ft.Spool

Black 78-22610 78-22640Brown 78-22611 78-22641Red 78-22612 78-22642Orange 78-22613 78-22643Yellow 78-22614 78-22644Green 78-22615 78-22645Blue 78-22616 78-22646Violet 78-22617 78-22647Gray 78-22618 78-22648White. 78-22619 78-22649

26 AWG STRANDED .051 nom.OD 7X34 strands



24 AWG STRANDED .056 nom.OD 7X34 strands



22 AWG STRANDED .062” nom.OD 7X30 strands










HOOK - UP WIRE



24 AWG SOLID Copper insulated

SPECIFICATIONSSOLID COPPER

PVC INSULATION (10 COLORS) .016” Insulation thickness

UL STYLE 1007/1569 VM-1CSA TR-64

TEMPERATURE -40 to 105° C.Rated 300 volts










202

CORDS AC & POWER

A standard insulated, two conductor cord with a rib on one conductor for polarity indi-cation. Available in popular colors. The 25 foot lengths are supplied in blister displaypackages. The longer lengths are supplied on spools with a clear, protective shrink-wrap.

SPT cord sets are typically used in light duty appli-cations, such as table radios, household lamps andso forth. SPT cords are two conductor, 18 gauge.SJT cord sets are three conductor, counting theground wire, and regarded as hard service cord sets,frequently used with bench tools such as grinders,saws etc.. this is a popular cord set for equipment ofall kinds. SJT cord sets are supplied with a standardNEMA 5-15P power plug. Both of these series are offully molded construction, the plug and cord are per-manently connected.

A direct replacement for the new Panasonic Cassette Recorders, as well as for otherrecorders and many portable TV sets. Mates with male receptacles having 3/32” diameterpins on 0.275” centers. Rated 7 amps at 125V AC, this cord set is UL Approved. 6 feet long.

Top: SPT Type AC CordsBottom: SJT Type AC Cords

Unbreakable - All Vinyl#18 Gauge wire - SPT1 AC plug to triple socketPlugs and connectors are molded in matching color vinyl.Connectors have safety adaptor for protection.

No. 8405B - Brown, 9 ft.No. 8406B - Brown, 15 ft.

No. 8405V - White, 9 ft.No. 8406V - White, 15 ft.

SPECIFICATIONS:AWG Gauge: 18 Gauge copperStranding: 41 strands/ 34 GaugeInsulation Thickness: 0.030”Insulation Material: PVC

Working Voltage: 300V ACTemperature Range: 105oCSize:

Nominal O.D.: 2.65 x 5.35mm or .104” x .210”UL Listed CSA Approved

18 AWG SPT-1 PARALLEL POWER CORD UL listed

AC POWER CORD SETS for OEM and Replacements

AC CORD SETfor Cassette Recorders

TRIPLE EXTENSION CORD UL Listed

COLORBlackBrownWhite

25 ft.48-14248-14448-146

100 ft.48-10248-10448-106

250 ft.48-25248-25448-256

1000 ft.48-100248-100448-1006

2000 ft.48-200248-200448-2006

Part No.

SPT1182-6BL

SPT1182-6BR

SPT1182-6WH

SPT1182-9BL

SPT1182-9BR

SJT143-3

SJT143-6

SJT163-3

SJT163-6

SJT163-9

SJT183-6

SJT183-9

UL Wire Type

SPT-1

SPT-1

SPT-1

SPT-1

SPT-1

SJT

SJT

SJT

SJT

SJT

SJT

SJT

Wire Gauge

18 x 2

18 x 2

18 x 2

18 x 2

18 x 2

14 X 3

14 x 3

16 x 3

16 x 3

16 x 3

18 x 3

18 x 3

Length

6 ft.

6 ft.

6 ft.

9 ft.

9 ft.

3 ft.

6 ft.

3 ft.

6 ft.

9 ft.

6 ft.

9 ft.

Color

Black

Brown

White

Black

Brown

Black

Black

Black

Black

Black

Black

Black

Amps

10

10

10

10

10

15

15

15

13

13

10

10

No. 2464PNo. 2464PB bulk packagedNo. 2465P - Replacement power cord for

Sony recorders and boom boxesNo. 2465PB bulk packaged

No. 2465P

No. 2464P

203

TWIST-ON WIRE CONNECTORS

Molded of rugged, impact and heat resistantplastic. Color identifies size. Heavy ribbed bodies for easy gripping. Display package of10.

No. WN66 - Large - redNo. WN66B - bulkWire size: #18 to #10Rating: 600v/ Buildingwire, 1000v/ Signs &Fixtures

No. WN33 - Small - orangeNo. WN33B - bulkWire Sizes: #18 to #16Rating: 300V/Building wire,300v/Signs & Fixtures

No. WN44 - Medium - yellowNo. WN44B - bulkWIRE SIZES: #18 to #12Rating: 600v/ Building wire,1000v/ Signs & FixturesUL Listed

REPLACEMENT AC PLUGSBlack; Solder Terminals

No. 8464

No. 8466

No. 8465

VINYL PLASTIC ELECTRICAL TAPEUL LISTED66 ft. rolls x 3/4” wide,black vinyl tape, witha dielectric strength of12,000 volts, and ten-sile strength of 15 lbs.per inch. Thickness 7-9 mils. Flexiblestretch, waterproof, and will resist oil, gaso-line, salt water, alkalis, and sunlight.

No. PT2No. PT2B -bulk packaged

AC CONNECTORS

The LKG Wire Knutt, A push - in wire connector, fast, alternative to wire nuts.

The LKG Wire Knutt accommodate wire sizes from 22 to 12 AWG (solid conductors). Fast assembly! Strip wire (0.43” or 11 mm strip length) andpush it into the knutt. Fast and secure; use in machinery, house wiring etc. for fast and secure connection of wires of same size or various sizes.Available in sizes for joining from two to eight wires.

Specification:Housing Material: Thermoplastic, UL 94V-2 flame retardentCurrent: 24A (VDE)Voltage: UL-600V, VDE-450V.Temperature Rating: 110ºCUL file No.: E - 113650

PART NUMBER

65-252

65-253

65-254

65-255

65-258

COLOR

RED

ORANGE

YELLOW

GREY

BLACK

WIRES

2

3

4

5

8

65-252 65-253 65-254 65-255 65-258

UL Approved

No. R118J

CONVENIENCE RECEPTACLE

Suitable for accessory equipment power out-lets on amplifiers, pre-amplifiers, clock radiochassis, etc. Requires 1-1/16” x 7/16” rec-tangular cutout.Non Polarized Receptacle.

204

AC CONNECTORS

DEAD FRONT GROUNDING CAP

UL Listed & CSA Approved

No. 8515P

No. 8901

No. 6092S

No. 1051B - BrownNo. 1051V - Ivory10A-250V15A-125VUL ApprovedNon Polarized Plug

No. 8147V IvoryNo. 8147B Brown

No. 8419

No. 8400

UL and CSA Approved. This three-prong AC plugcan take wires up to #12. Removable insert used forthinner wire. Steel armor clad. New dead front design completely encloses thehousing, eliminating need for insulator and insuringagainst accidental short circuit.

RUBBER AC 3 WIRE PLUG


No. 8520

For .225” - .600” cord rubber plugs and femalereceptacles resist chemical and petroleum by-prod-ucts. Have low temperature flexibility and resist highheat.

3 WIRE FEMALE CONNECTOR

OFFICE EQUIPMENTAC CONVERTER (IEC STANDARD)

JIFFY PLUG

AC RUBBER ATTACHMENT PLUG

BAKELITE FLAT GRIP CAP

TRIPLE GROUNDING TAP

PARALLEL GROUNDING ADAPTOR

VINYL CUBE TAP

Three prong power cord connector (like industry typeIEC320-13) used on nearly all personal computers,printers, copy machines and other office equipment. No. 8522 In-Line Female (Rated 10A @ 250VAC)No. 8922 - Right Angle In-Line Female

(Rated 10 @ 250 VAC)No. 8523 In-Line Male (Rated 10A @ 250VAC)No. 8923 - Right Angle In-Line Male

(Rated 10A @ 250 VAC)No. 8527 Panel Mount Male, Snap-In Type.

(Rated 15A @ 250VAC)No. 8529 Panel Mount Male, Screw Mt. Type

(Rated 15A @ 250VAC)

Accepts 3 standard grounding plugs into a singlegrounding outlet. Ample room even for right angletype plug.Size of bakelite case: 3” x 1-3/32” x 1” deep.

Convert three-prong to two-prong caps. Polarizedblades and rigid grounding lug. Compact designextends only 1” from socket.

Heavy-duty, durable brown cube tap. One-piececonstruction. Brass spring prongs. Rated: 15A - 125V

No tools, no stripping. Perfect contact in 5 seconds.Cords extends from side of plug.

Non Polarized. Color: White

With brass plated steel spring prongs. 15 Amps-125Volts. Cord hole .450”. Sturdy in construction. Canbe used for heavy duty work, as well as for regularcord sets.


No. 8525For .225” - .600 cord.

ARMORED GROUNDING CONNECTOR

3-Contact AC Female Receptacle with Removable Cord Clamp

This yellow vinyl connector mates with our No.8515P dead front grounding cap. It takes 3 #12wires. Each circuit is separated by vinyl divider.Uses heavy duty, double wipes contacts. UL Listedand CSA Approved.

No. 8515J

Hospital Grade AC PLUG and CONNECTOR

Figure 1 Figure 2

A.C. power connectors meeting all federal specifi-cations for hospital use, as required by the NationalElectric Code (article 517). Verified by UL to latestfederal specifications. Both devices feature termi-nals separated by insulating barriers, captivespeed-screws assembly and integral strain relief.Both accommodate cords with an O.D. from .250” to.685”. The connector configuration is NEMA 5-15and rated at 15 amps at 125 volts AC.fig. 1 No. 8266 - male plugfig. 2 No. 8269 - connector

15A 125VNEMA 5-15

No. 8522

No. 8523

No. 8527

No. 8529

No. 8922

No. 8923

205

MULTITESTERS / CIRCUIT TESTERS

HI-VOLTAGE TESTING SCREWDRIVER

• AC/DC Voltage• DC Current• Resistance

No. 903-150N

No. UM22SPECIFICATIONS: 2000 OHMS--VOM

6 to 12 VOLT CIRCUIT TESTERwith HEAVY DUTY PROBE

DIGITAL MULTI-TESTER

TEST LIGHT

No. P5120For testing 80-500 Volts AC or DC. This handy combination screwdriver/testeris used for testing ground lines, open or shorted circuits.

No. P5128For testing all 6V and 12V systems: Auto, RV, Marine, Aircraft etc..Quickly finds short, grounds and open circuit.

No. P5100For testing 80-500 Volts AC or DC. The 5” insulated leads with finger guardinsulated tips make testing electrical circuits safe and easy. Red neon bulbglows with increasing intensity with increased voltage.

DISPLAYOVERRANGE INDICATIONMAXIMUM COMMON MODEVOLTAGEOPERATING ENVIRONMENT

STORAGE ENVIRONMENTTEMPERATURE COEFFICIENT

POWERBATTERY LIFE

DIMENSIONS

3 1/2 digit LCD .5” height, with polarity.3 least significant digits blanked

500V peak.0 to 50 C, less than 80% relative humidity up to 35º C, lessthan 70% relative humidity from 35º C to 50º C.-15º C to 50º C(0 to 18 C, 28 to 50), less than 0.1x applicable accuracy specification per C.9V alkaline or carbon-zinc battery (NEDA 1604)100 hours typical with carbon-zinc cells, 200 hours with alkaline cells.126mm long x 70mm wide x 24mm thick.(4.96”x2.76”x0.94”) Net weight 170g (6 oz)

Specifications:

Slip Grip Test Leads, Battery and Instructions are included

Sensitivity:DC Volt Ranges:

DC Current Ranges:AC Volt Ranges:

Resistances Ranges:Accuracy:

2000 ohms/volt2.5-10-50-500-1000.5-10-250ma.10-50-500-10005K-50K-500K3%DC, 4%AC

Analog VOM and transistor Tester90 Arc Mirrored ScaleVoltage 0-1000V VDC/VAC +4%fsSensitivity 20,000 Ohms/Volts DCSensitivity 9,000 Ohms/Volts ACCurrent 0-250mA-10A DC +3%fsResistancex1x10x100x1Kx10k OhmIncludes 9V and 2AA Batteries3-3/4” (W) x 5-3/4” (H) x 1” (D)

20,000OHMS/VOLT

No. 602-102

HIGHER PERFORMANCE POCKET MULTITESTER

206

TOOLS

10 pc. TOOL SETA tool for all applications for trimmer adjustments. Setincludes square tips, hex tips, different size screwdriverblades and recessed blades. Manufactured with tough cel-con material.

No. 63-910

10 PIECE ELECTRONIC COMBINATION WRENCH SET

This fine quality set of 10combination wrenches isexcellent for electronic repairand service. The size andthickness are especially suit-ed for technician needs. The wrenches are the follow-ing sizes: 5/32”, 3/16”, 1/4”,7/32”, 15/64”, 5/16”, 9/32”,3/8”, 11/32”, and 7/16”. Allare hot forged and chromeplated.

No. 63-608

ALIGNMENT TOOLS

MINIATURE POTENTIOMETER, “TRIMPOT” TOOL

One end is a recessed blade for non-slip adjustment of miniaturepotentiometers that have a protruding adjustment screw. The otherend has a protruding metal blade for pots with flush screw-slotadjustment. Small steel tips have negligible flux-effect: body ismolded of anti-static plastic. Replaces types 8608, AS8608.

No. 63-8608

SQUARE and HEX ALIGNMENT TOOLSquare: .060” Hex: 0.10”

A double-ended, anti-static alignment tool for ferrite core trans-formers. One end is a square .060” Tip with an additional protrud-ing flat (.024” thick) blade. The other end is a 0.10” hex with a pro-truding (.039” thick) blade. Replaces types 9440 and AS9440..

No. 63-9440

STEEL TIP DUAL ALIGNMENT TOOL

Recessed steel tip one end, protruding steel tip on the other. Toolshaft dia. 7/32” (5.5mm). The recessed tip fits a no.6 slotted shaftcommon to many I.F. transformers. The protruding tip is .130” wideand protrudes .190”. Molded of anti-static material. Replaces types8276 and AS8276.No. 63-8276

DOUBLE HEX ALIGNMENT TOOL

A broad usage tool with stepped .078” hex and 0.10” hex on oneend, preceded by a fine .020” x .065” flat blade. The opposite endis a 0.10” hex preceded by a .030” x .10” flat blade. Overall lengthis 7-9/16”, molded of durable Nylon.

No. 63-9297

LONG REACH ALIGNER, WITH HANDLE

A plastic alignment tool with a 0.02” x .080” steel tip. Length ofshaft from tip to handle is 5-3/4”. overall tool length is 7-7/8”. Shaftis somewhat flexible for tight spots; handle provides better gripthan regular alignment tools.

No. 63-5001

DOUBLE 078 HEX ALIGNERHEX: .078”

A Nylon tool .078” hex on both ends; one end undercut for reach-ing through to a bottom slug, the other with a stop to prevent over-reaching. Replaces type 9300.

No. 63-9300

207

TOOLS

ALIGNMENT TOOLSSPECIAL HEX-TIP TOOL

Hex: 0.10”

On one end, flat tip (0.025” thick x 0.10” wide) is followed by a0.10” hex. The opposite end is an undercut 0.10” hex. Overalllength, 5”. Replaces type 8606.

No. 63-8606

DOUBLE END HEX TOOLHex: .125”

One end is an under cut .125” and other is a .125” hex preceededby a flat (.025” thick x .10” wide) blade. Entire tool is moldedNylon. Replaces type 9091.

No. 63-9091

SCREWDRIVER-HEX COMBINATION TOOLHex: .078”

One end is an undercut 0.078” hex tip and other is a screwdriverstyle tip that is 0.10” in diameter and tapers to 0.015” thick. Overalllength: 5-5/16”, molded Nylon. Replaces type 9304.

No. 63-9304

SCREWDRIVER-HEX COMBINATION TOOLHex: .092”

One end is an undercut 0.092” hex tip and other is a screwdriverstyle tip that is 0.10” in diameter and tapers to 0.015” thick. Overalllength: 5-5/16”, molded Nylon. Replaces type 8282.

No. 63-8282

TELEVISION ALIGNMENT TOOL SET

Kit contains the five most commonly needed tools for televisionservice. Also included is an extender that may be used as anextension handle when a longer reach tool is needed. Kit is sup-plied in a segmented pouch to keep tools together.Contains: 63-9300 63-8606

63-8282 63-909163-9304 Extender

No. 63-8454

SQUARE and HEX ALIGNMENT TOOLSquare: .060” Hex: 0.10” & Blade

A double-ended, molded nylon tool: overall length is 4-3/4” Oneend is a square .060” tip with protruding blade from a 0.10” hex.The other end is a flat (.039” thick) blade which is followed by anundercut .10” hex. A tool frequently needed in color copier mainte-nanceNo. 63-9442

DOUBLE ENDED HEX TOOLHex: 0.078”

Undercut .078” hex on one end and on the other the hex isstopped with a larger diameter shaft. Overall length is 5.33”.Molded Nylon.No. 63-9301

DOUBLE ENDED HEX TOOLHex: 0.10” & .087”

A dual ended tool with an undercut 0.10” hex on one end and astandard .087” (for 2.2mm cores) hex on the other. Overall lengthis 5.6”. Molded Nylon.No. 63-8603

TECH’S ALIGNMENT TOOL KITA general purpose kit containing four tools with a variety of need-ed tips. Includes tools for most common ferrite core adjustmentsused in today’s circuits. Supplied in a plastic pouch. Contains toolNos.: 63-8603, 63-9301, 63-9442, and 63-9297.No. 63-8420

208

HAND TOOLS

FIBER OPTICS CRIMPING TOOL

This tool is especially designed to crimp Fiber Optics connectors. It is compatible with most types of connec-tors including AMP, MOLEX, 3M and others.

FeaturesHeavy-duty Carbon Steel constructionInsulated HandleReplaceable Precision milled jawsOverall length 8.7” (220mm)Oval Crimp for .042”,.068”,.133”,.162”,.195” Crimps Single Mode & Multimode Connectors

No. 63-6336 Professional Fiber Optics Crimp tool

FIBER OPTICS STRIPPING TOOLS

These special strippers are especially made to strip the protective material from the fiber prior to assembly into thefiber optic connector. They are designed not to nick the fiber, which may cause distortion of the signal or breakageof the fiber.

FeaturesBody made of ABS PlasticCutter Made of SK-5 MaterialOverall Length 3.6” (92mm)Cable / Size:

Glass Fiber = .254mm (.010”) & .32mm (.0125”)Plastic Fiber = .23mm (.009”)

No. 63-6342 for Glass Fiber Optic Cable (.254 mm)No. 63-6344 for Plastic Fiber Optic Cable (.23 mm)

FIBER OPTICS JACKET STRIPPING TOOL

This tool is designed to strip the outer jacket of optical fiber cable as well as the 250um fiber, and the 125umbuffer coating without damaging the fiber. It will work well on cables with either glass fiber or plastic fiber.

FeaturesMiddle carbon Steel constructionInsulated HandleHandy stripping Guide for Jacket, Fiber & CoatingAdjustable Mechanism for special GaugesOverall Length 5” (125mm)

No. 63-6223 Fiber Optics Jacket Stripping Tool

FIBER OPTICS KEVLAR SCISSORS

Another special tool designed to cut the KEVLAR insulation from fiber optic cable. It has a special designedjaw with serrated teeth to make it easier to trim the KEVLAR away from the fiber cable.

FeaturesSpecial Alloy Steel construction, chrome platedInsulated HandleSerrated TeethCuts KEVLAR Overall length 5.8” (147mm)

No. 63-6151 KEVLAR Scissors

Philmore pg.193-208 Catalog

Documents

Transcript of Philmore pg.193-208 Catalog