PHILIPS.pdf

Quick Start Guide

Whats in the Box?You should find these items upon opening the box.

MCM148

1Quick Start Guide

2User Manual

Quick Start Guide User manual

ALB/PRESET

3

1

2

Remote Control

1 Power plug adaptor

MCM148_QSG_Eng 2009.11.26, 11:321

Downloaded from www.Manualslib.com manuals search engine

12

Connection

Connect the speaker wires to the SPEAKERS terminals.

Connect the power cord of the system to the AC power outlet.

Tip:It is unnecessary to connect the FM pigtail antenna since itis fixed to the main unit.

speaker(right)

speaker(left)

FM wire antenna

AC power cord

FMAERIAL

AU

HEADPHO

X

E

2

1

MCM148_QSG_Eng 2009.11.26, 11:322


51

2

3

4

Setting the clock

In standby mode, press and hold CLOCK/DISPLAY on theremote control set for 2 seconds.

Press PROG to select 12-hour or 24-hour display.

Press CLOCK/DISPLAY to confirm. The clock digits for the hours flash.

Press TUNING 4 ( / on the remote control)to set the hours.

Press CLOCK/DISPLAY again. The clock digits for the minutes flash.

Press TUNING 4 ( / on the remote control)to set the minutes.

Press CLOCK/DISPLAY to confirm the time.

6

7

12

3

4

5

Playing a disc

Select CD source.

Lift the CD door on the top of the system to open the CD compartment.

Insert a disc with the printed side facing up and press downon PULL TO OPEN to close the CD door.

Pressto start playback.

Press 9 to stop playback.

PROG.

ALB/

CLOCK/DISPLAY

PRESET

CLOCK/DISPLAYPROG.

PROG.

ALB/

CLOCK/DISPLAY

PRESET

MCM148_QSG_Eng 2009.11.26, 11:323


2009 C Koninklijie Philips ElectronicsN.V. All rights reserved.

http://www.philips.com

MCM148_55_QSG_V2.0_948

Tip:Detailed playback features andadditional functions are described inthe accompanied owner's manual.

1

2

Select TUNER source.

Press PROG on the remote control for more than two seconds to program all available stationsin order of waveband.

Press ALBUM/PRESET +/- until the desired preset station is displayed

Programming and tuning to radio stations

3

Notes for the remote control: First, select the source you wish tocontrol by pressing one of the source selectkeys on the remote control (DISC or AUX,for example). Then select the desired function ( 2;,, for example).

MCM148_QSG_Eng 2009.11.26, 11:324


PHILIPS.pdf

Documents

Transcript of PHILIPS.pdf