Philips Road Lighting
Transcript of Philips Road Lighting
Road lighting
Philips Lighting understands the issues associatedwith road lighting and offers the experienceand the solutions to create a safe comfortableenvironment for all road users, whether theyare drivers, cyclists or pedestrians.
Road Lighting
Dimensions (mm)
TRC 33 Series
IP 33
General DescriptionRoad lighting luminaire suitable for use with 18W/20W and 36W/40W fluorescent lamps
Features! A lightweight housing, fabricated from aluminium sheet, stove
enamelled grey. It is suitable for mounting on mast-arms of up to 38 mm O.D
! Gear tray-cum-reflector made of CRCA sheet, stove enamelled white. Gear tray accommodating the electrical control gear pre-wired up to the terminal block
! Acrylic cover made from clear methyl methacrylate sheet and provided with 6 nos. of toggles for fixing the acrylic cover on to the canopy of the luminaire
! Rubber gasket provided making the luminaire rainproof
Applications! Residential colony roads ! Industrial areas ! Secondary roads
Installation ! Pole entry through U clamps suitable for pole diameter of maximum
Ø38mm.
.
TRC 33/236
1300
TRC 33/236
105
38
157
Road Lighting
TRC 33
Compliances• IP 33
• Class I
108
Road Lighting
TRC 33 Series
109
Technical Data
Type For Lamp Nominal Mains NominalVoltage (V) Current (A) Power Factor
TRC 33/218 2 x 'TL'D 18W/'TL'20W 240 0.23 0.95
TRC 33/236 2 x 'TL'D 36W/'TL'40W 240 0.45 0.95
Ordering Data
Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume 3per box (mm) (kg) (kg) (m )
TRC 33/218 housing 1310 12335 6 800 x 345 x 265 2.40 x 6 16.00 0.073
TRC 33/218 cover 1310 19335 12 771 x 280 x 335 0.30 x 12 4.60 0.072
TRC 33/236 housing 1310 19325 4 1320 x 340 x 190 4.60 x 4 20.40 0.085
TRC 33/236 cover 1310 19525 8 1350 x 420 x 230 0.30 x 8 3.10 0.130
HGS 120
Road Lighting
Technical Data
Ordering Data
111
Dimensions (mm)
HGS 120Road Lighting
HGS 120
Road Lighting
General DescriptionRoad lighting luminaire suitable for use with Tubular Fluorescent Lamp of 1x36W/40W TLD and 1x28, 2x28 and 2x54W TL5
Features:Housing fabricated from sheet aluminum epoxy polyester powder coated white with end caps made of impact-resistant engineering plastic for sturdy and excellent corrosion resistant construction
Gear tray cum reflector made of CRCA sheet steel epoxy powder coated white
Gear tray accommodating all electrical accessories comprising energy efficient electronic ballast, prewired up to the terminal block. The use of electronic gear with TL5 (28W) lamp ensures more than 25% reduction in energy consumption with respect to TLD (36W) with conventional gear.
For TLD, gear tray accommodating all electrical accessories comprising of energy efficient open construction ballast, starter and capacitor prewired up to terminal block.
Acrylic cover made from clear Poly Methyl Methacrylate sheet & provided with 6 numbers of toggles for fixing the acrylic cover on to the canopy of the luminaire
Suitable for side mounting with the help of U clamps provided on the canopy
Luminaire is protected against ingress of dust & moisture with EPDM rubber provided in the housing
Conforms to IP43
•
•
•
•
•
•
•
•
Applications• Secondary roads
• Industrial areas
• Residential colony roads
Installation• Suitable for side mounting with the help of U clamps for pole
diameter of max. 28mm O.D.
IP 43
305
1305
44
PHILIPS
4011
0
38
86
90
HGS 120
Compliances• IP 43
• Class I
110
Type For Lamp Nominal Mains NominalVoltage (V) Current (A) Power Factor
HGS 120 1xTLD 36/40W 1 x TLD 36/40 W 240 0.23A 0.85
HGS 120 1xTL5 28W 1 x TL5 28W 240 0.15A 0.95
HGS 120 2xTL5 28W 2 x TL5 28W 240 0.28A 0.95
HGS 120 2xTL5 54W 2 x TL5 54W 240 0.46A 0.99
Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume 3per box (mm) (kg) (kg) (m )
HGS 120 1xTLD 36/40W Housing 1310 19345 6 1390 x 290 x 100 8.75 10 0.040
HGS 120 1xTL5 28W Housing 135027675 6 1390 x 290 x 100 8.75 10 0.040
HGS 120 2xTL5 28W Housing 135027685 6 1390 x 290 x 100 8.75 10 0.040
HGS 120 2xTL5 54W Housing 135027695 6 1390 x 290 x 100 8.75 10 0.040
HGS 120 Cover 1310 19575 12 1320 x 220 x 260 3.6 4.8 0.075
General DescriptionRoad lighting luminaire suitable for use with High Pressure Sodium Vapour SON 70W (I or E) & High Pressure Mercury Vapour HPL -N 80W/125W lamp.
SRP 308 for Son 70W (I or E)
HRP 308 for HPL-N 80W / 125 W
Features! Electrical accessories such as energy efficient copper ballast,
electronic ignitor (for SON/E lamps), power factor improvement capacitor etc., are pre-wired upto a terminal block
! Pressure die-cast aluminium gear plate for mounting all accessories. ! Accessibility to gear compartment from top for ease of maintenance
& installation! High purity aluminium lamp compartment, electrochemically
brightened and anodised inside, epoxy powder coated outside in an attractive grey colour
! High quality long lasting felt gasket impregnated with insecticide & water repellent chemical on the periphery of the lamp compartment
! Stainless steel toggles for fixing UV stabilised acrylic bowl or heat resistant toughened glass cover to housing
EPR gasket between lamp and specially designed gear compartment (ensuring IP 33 protection to the gear compartment)
! Hinging arrangement for both gear & lamp compartment cover for ease of maintenance
! Option for acrylic bowl or heat resistant toughened glass cover! Conformance to IP 54 protection for lamp compartment! Conformance to Relevant IS specifications
Applications! Secondary roads ! Industrial areas ! Residential colony roads
Installation ! Pole entry through U clamps suitable for pole diameter of maximum
Ø40mm.
H/SRP 308
Dimensions (mm)
Road Lighting
38-42
258
240
445
!
H/SRP 308
IP 54
IP 33
Lamp Compartment
Gear Compartment
Road Lighting H/SRP 308
112
H/SRP 308
Technical Data
Type For Lamp Nominal Mains Current Nominal Voltage (V) (A)Power Factor
Ordering Data
Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume 3per box (mm) (kg) (kg) (m )
SRP 308
SRP 308
HRP 308
1 x SON 70W (E)
1 x SON 70 W (I)
1 x HPL -N 80 W
220/240
220/240
200/220/240
0.45
0.45
0.45
0.85
0.85
0.85
HRP 308 1 x HPL -N 125W 200/220/240 0.70 0.85
SRP 308/70W (I) with glass cover
SRP 308/70W (E) with glass cover
SRP 308/70W (I) with acrylic cover
SRP 308/70W (E) with acrylic cover
HRP 308/80W with glass cover
HRP 308/80W with acrylic cover
HRP 308/125W with glass cover
HRP 308/125W with acrylic cover
1310 11805
1310 11825
1310 11815
1310 11835
1310 11845
1310 11855
1310 11865
1310 11875
1
1
1
1
1
1
1
1
550 x 385 x 270
550 x 385 x 270
550 x 385 x 270
550 x 385 x 270
550 x 385 x 270
550 x 385 x 270
550 x 385 x 270
550 x 385 x 270
4.40 x 1
4.40 x 1
4.00 x 1
4.00 x 1
4.40 x 1
4.00 x 1
4.40 x 1
4.00 x 1
5.00
5.00
4.60
4.60
5.00
4.60
5.00
4.60
0.057
0.057
0.057
0.057
0.057
0.057
0.057
0.057
Road Lighting
113
XRP 51
Road Lighting
Technical Data
Type For Lamp Nominal Mains Current Nominal Voltage (V) (A) Power Factor
Ordering Data
Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume 3per box (mm) (kg) (kg) (m )
XRP 51 housing
XRP 51 cover
1310 12685
1310 12635
2
8
445 x 210 x 286
480 x 355 x 425
2.775 x 2
0.50 x 8
6.40
5.00
0.026
0.062
XRP 51 1 x SOX 35W 220/240 0.23 0.85
115
Road Lighting
Dimensions (mm)
XRP 51
General DescriptionRoad lighting luminaire suitable for use with Low Pressure Sodium Vapour SOX 35W lamps.
Features! Housing made of die-cast aluminium, MBV treated for corrosion
resistance! The housing accommodates the electrical accessories like ballast,
power factor improvement capacitor, ignitor, all pre-wired up to a porcelain connector block. Two earthing terminals are provided on the housing, one inside and one outside. A cable clamping arrangement is also provided
! Reflector plate made of M.S. stove enamelled white, is fixed to the housing by four screws. This plate accommodates the lampholder and a lamp support. To facilitate maintenance the plate can be kept captive with the housing by a pair of flexible wire lengths
! Felt gasket impregnated with insect and water repellent solution on the periphery of the housing
! A prismatic cover moulded from clear UV stabilised acrylic! Stainless steel clips for fixing the cover to the housing
Applications! Secondary roads ! Industrial areas ! Security ! Residential colony roads
Installation ! Pole entry through U clamps suitable for pole diameter of maximum
Ø40mm.
IP 54
XRP 51
Road Lighting
417
40
15
172
163
90
XRP 51 Compliances• IP 54
• Class I
114
Note : Ballast of suitable rating shall be packed separately (packing data on request)
Road Lighting
Dimensions (mm)
SRX 066
General DescriptionRoad lighting luminaire suitable for use with High Pressure Sodium Vapour SON/SON-T 70W (I or E) lamp.
Features! All electrical accessories such as energy efficient copper ballast,
electronic ignitor (for SON/E or SON-T/E 70W lamp), power factor improvement capacitor etc., are pre-wired upto a terminal block and mounted on a specially designed easily detachable gear plate
! Specially designed optics for energy efficient tubular SON-T lamps. Alternatively compatible with ovoid SON lamp
! Single piece housing cum reflector of deep drawn aluminium, powder coated outside in an attractive grey colour. Lamp compartment is electrochemically brightened and anodised
! High quality long lasting felt gasket impregnated with insecticide & water repellent chemical on the periphery of the lamp compartment
! Stainless steel toggles for fixing UV stabilised acrylic bowl to housing! Die-cast aluminium (LM6) pole mounting piece! Hinging arrangement for UV stabilised acrylic bowl for ease of
maintenance! Conformance to IP 54 protection for lamp and gear compartment! Conformance to relevant IS specifications
Applications! Secondary roads! Industrial areas! Residential colony roads
Installation ! Pole entry through U clamps suitable for pole diameter of maximum
Ø40mm.
IP 54
SRX 066
Road Lighting
500 40
120
250
102
260
500
SRX 066Compliances• IP 54
• Class I
116
SRX 066
Road Lighting
Technical Data
Type For Lamp Nominal Mains Current Nominal Voltage (V) (A) Power Factor
Ordering Data
Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume 3per box (mm) (kg) (kg) (m )
SRX 066/70 (E) housing
SRX 066/70 (I) housing
SRX 066 acrylic cover
1310 11165
1310 11155
1310 11185
1
1
10
600 x 300 x 200
600 x 300 x 200
580 x 300 x 330
2.60 x 1
2.60 x 1
0.30 x 10
3.00
3.00
4.00
0.360
0.360
0.057
SRX 066/70 (E)
SRX 066/70 (I)
1 x SON / SON-T 70W (E)
1 x SON / SON-T 70W (I)
240
240
0.45
0.45
0.85
0.85
117
Note : Ballast of suitable rating shall be packed separately (packing data on request)
SRX 086
Road Lighting
Technical Data
Type For Lamp Nominal Mains Current Nominal Voltage (V) (A) Power Factor
Ordering Data
Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume 3per box (mm) (kg) (kg) (m )
SRX 086/150W 0.048
SRX 086/250W 0.048
SRX 086 acrylic cover
1310 11285
1310 11295
1310 11465
1
1
10
735 x 310 x 210
735 x 310 x 210
610 x 320 x 370
2.80 x 1
2.80 x 1
0.45 x 10
4.20
4.20
5.90 0.072
SRX 086/150W 1 x SON/SON-T 150W
SRX 086/250W 1 x SON/SON-T 250W
240
240
0.85
1.40
0.85
0.85
119
Road Lighting SRX 086
SRX 086
General DescriptionRoad lighting luminaire suitable for use with High Pressure Sodium Vapour SON/SON -T 150W/250W lamp.
Features! All electrical accessories such as energy efficient copper ballast,
electronic ignitor, power factor improvement capacitor etc., are pre-wired upto a terminal block and mounted on a specially designed detachable gear plate
! Optics easily detachable for energy efficient SON-T/SON lamps! Single piece housing cum reflector of deep drawn aluminium, powder
coated in attractive grey colour outside! Lamp compartment is electrochemically brightened & anodised
inside ! High quality long lasting felt gasket impregnated with insecticide and
water repellant c hemical on the periphery of the housingStainless steel toggles for fixing acrylic bowl to the housing
! All electrical accessories are mounted on gear plate! Die-cast aluminium (LM6) pole mounting piece! Hinging arrangement lamp compartment for ease of maintenance! Conformance to IP 54 protection for lamp and gear compartment! Conformance to relevant IS specifications
Applications! Major city roads ! Roundabouts ! Industrial areas ! Car parks
Installation ! Pole entry through U clamps suitable for pole diameter of maximum
Ø60mm.
IP 54
Dimensions (mm)
Road Lighting
678 40
115
585
60
166
327
300
!
SRX 086
Compliances• IP 54
• Class I
118
Note : Ballast of suitable rating shall be packed separately (packing data on request)
Road Lighting
Technical Data
Ordering Data
Velocity SGP 338
Type For Lamp Nominal Mains NominalVoltage (V) Current (A) Power Factor
SGP 338/400 W 1 x SON-T 400W 240 2.25 > 0.85
MGP 338/400W 1 x HPI- T400W 240 2.20 > 0.85
SGP 338/250W 1 x SON- T250W 240 1.40 > 0.85
MGP 338/250W 1 x HPI-T 250W 240 1.38 > 0.85
SGP338 1XSON-T250W FG 1 x SON-T 250W 240 1.40 > 0.85
SGP338 1XSON-T400W FG 1 x SON-T 400W 240 2.25 > 0.85
SGP338 1XHPI-T250W FG 1 x HPI-T250W 240 1.38 > 0.85
SGP338 1XHPI-T400W FG 1 x HPI-T400W 240 2.20 > 0.85
Type Order No. Quantity per Dimensions Net Weight Gross Weight Volume 3box (mm) (kg) (kg) (m )
SGP338 1XSON-T250W FG 1350 16585 1 870 x 420 x 210 9.00 12.0 0.077SGP338 1XSON-T400W FG 1350 16595 1 870 x 420 x 210 9.00 12.0 0.077
SGP338 1XHPI-T250W FG 1350 16605 1 870 x 420 x 210 9.00 12.0 0.077
SGP338 1XHPI-T400W FG 1350 16615 1 870 x 420 x 210 9.00 12.0 0.077
SGP 338/400W 1310 13785 1 840 x 445 x 330 9.00 12.5 0.123
MGP 338/400W 1310 13795 1 840 x 445 x 330 9.00 12.5 0.123
SGP 338/250W 1310 11915 1 840 x 445 x 330 9.00 12.5 0.123
MGP 338/250W 1310 13575 1 840 x 445 x 330 9.00 12.5 0.123
121
Road Lighting
Dimensions (mm)
Velocity SGP 338
Road Lighting
350
300
820
250
General descriptionRoad lighting luminaire suitable for use with High Pressure Sodium Vapour SON-T PLUS / HPI-T PLUS 400W Lamp. Luminaire can also be used with SON-T PLUS / HPI-T PLUS / CDM-TT 250 W lamp and SON-T PLUS / CDM-TT 150W lamps.
Features! Housing made of LM6 high pressure die-cast aluminium which
does not need painting to prevent corrosion of the housing. However paint options are available as an optional feature. Available in choice of colours.
! All electrical accessories such as energy efficient, low loss, open construction copper ballast, ignitor and power factor improvement capacitor, etc are pre-wired upto the terminal block and mounted on a removable control gear module for ease of maintenance. All electrical connections of the control gear module with the rest of the luminaire are click fix, fool proof and require use of no tools. Control gear compartment opens from top.
! The lamp compartment consists of electrochemically brightened and anodized, high purity POT reflector with a specially designed ribbed profile for high spacing to mounting height ratio.
! The lamp compartment consists of a heat resistant toughened, available in options of curved glass & flat glass (FG) which is sealed to the housing. Lamp replacement is by opening the top compartment. This ensures IP66 classification of ingress protection for the lamp compartment.
! Specially designed pole mounting arrangement facilitates bottom as well as lateral pole mounting.
! Flexible optics to achieve optimum light distribution to suit different road and installation parameters.
Applications! Major city roads! Highways and expressways! Junctions and roundabouts! Industrial areas! Car parks
Installation! Specially designed spigot enables pole entry dia options from
42mm to 70mm. O.D. Specially designed pole-mounting piece for bottom as well as lateral entry.
SGP 338
IP 66
IP 54
Lamp Compartment
Gear Compartment
SGP 338
Side Mounting Direct pole Mounting
SGP 338 FG
120
Note : Ballast of suitable rating shall be packed separately (packing data on request)
Road Lighting
Technical Data
Ordering Data
Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume 3per box (mm) (kg) (kg) (m )
CRP330/150W 1310 13515 1 720 X 410 X 230 8.30 10.60 0.068
CRP330/250W 1310 13505 1 720 X 410 X 230 8.30 10.60 0.068
CRP330 SON-T 150W SG 1310 13415 1 720 X 410 X 230 8.30 10.60 0.068
CRP330 SON-T 150W PK 1310 13425 1 720 X 410 X 230 8.30 10.60 0.068CRP330 SON-T 150W AS 1310 13435 1 720 X 410 X 230 8.30 10.60 0.068
CRP330 SON-T 150W TS 1310 13465 1 720 X 410 X 230 8.30 10.60 0.068
CRP330 SON-T 250W SG 1310 13475 1 720 X 410 X 230 8.30 10.60 0.068CRP330 SON-T 250W PK 1310 13535 1 720 X 410 X 230 8.30 10.60 0.068
CRP330 SON-T 250W AS 1310 13555 1 720 X 410 X 230 8.30 10.60 0.068
CRP330 SON-T 250W TS 1310 13665 1 720 X 410 X 230 8.30 10.60 0.068
Broadway II CRP 330
Type For Lamp Nominal Mains Current Nominal Voltage (V) (A) Power Factor
1 x SON-T/CDM-TT 150W
1 x SON-T/CDM-TT/HPI-T 250W
CRP330 SON-T 150W SG 1 x SON-T/CDM-TT 150W 240 0.85 > 0.85
CRP330 SON-T 150W PK 1 x SON-T/CDM-TT 150W 240 0.85 > 0.85
CRP330 SON-T 150W AS 1 x SON-T/CDM-TT 150W 240 0.85 > 0.85
CRP330 SON-T 150W TS 1 x SON-T/CDM-TT 150W 240 0.85 > 0.85
CRP330 SON-T 250W SG 1 x SON-T/CDM-TT/HPI-T 250W 240 1.40 > 0.85
CRP330 SON-T 250W PK 1 x SON-T/CDM-TT/HPI-T 250W 240 1.40 > 0.85
CRP330 SON-T 250W AS 1 x SON-T/CDM-TT/HPI-T 250W 240 1.40 > 0.85
CRP330 SON-T 250W TS 1 x SON-T/CDM-TT/HPI-T 250W 240 1.40 > 0.85
CRP 330 / 250W 240 0.85 > 0.85
CRP 330 / 150W 240 1.38 > 0.85
123
Road Lighting
Dimensions (mm)
Broadway II CRP 330
CRP 330
Road Lighting
General Description
IP 65
Colony Roads
58
337
240
703
234
222
0.60
TO SUIT POLE
colour. options can be givenHigh purity aluminium pot reflector
IP 65 for both lamp and glass compartment
Broadway II Compliances• IP 65
• Class I
122
Note : Ballast of suitable rating shall be packed separately (packing data on request)
Note : SG : Sea Green, PK: pink , AS : antique Silver, TS : textured silver
Dimensions (mm)
Road Lighting
CRP 320
General DescriptionRoad lighting luminaire suitable for use with high pressure sodium vapour SON-T 70W (E/I lamp. The luminaire is also suitable for use with CDM-TT 70W lamp.
Features•
•
•
•
•
Applications• Highways
• Bridges
• Roads
• Flyovers
• Secondary roads
• Malls, shopping & pedestrian areas
• Parks & gardens
• Parking spaces & other open areas
• Industrial areas
• Software Parks
• Housing complexes
Installation• Suitable for side mounting with the help of U clamps for pole
diameter of max. 28mm O.D.
Compliances• IP 65
• Class I
Die-cast aluminium housing accommodating the lamp and gear compartments ensuring ruggedness and long life.
POT optics reflector and heat resistant toughened glass cover for efficient and glare free lighting.
All components such as lamp holder, ballast, ignitor and power factor improvement capacitor are pre-wired upto the terminal block and mounted on a removable gear tray. This gear tray is mounted on a die cast aluminium frame. The housing has a top opening hinging mechanism and single point fastening for ease of maintenance.
Both lamp and gear compartment conform to IP 65 classification of ingress protection ensuring long life of components and undiminished light distribution.
Suitable for use with tubular High Pressure Sodium Vapour SON-T and ceramic discharge Metal Halide CDM-TT lamps.
IP 65
Broadway III CRP 320
CRP 320
Road Lighting
601
59
234.
7
158
522
Ø 4
415
8
Ø 0.44To Suit Pole
124
Road Lighting
Technical Data
Ordering Data
Broadway III CRP 320
Type For Lamp Nominal Mains NominalVoltage (V) Current (A) Power Factor
CDM-TT 70WCDM-TT 70WCDM-TT 70WCDM-TT 70WCDM-TT 70W
CRP320 SON-T 70W(E) SG 1x SON-T 70W(E)/ 240 0.45 >0.85
CRP320 SON-T 70W(E) PK 1x SON-T 70W (E)/ 240 0.45 >0.85
CRP320 SON-T 70W(E) AS 1x SON-T 70W (E)/ 240 0.45 >0.85
CRP320 SON-T 70W(E) TS 1x SON-T 70W (E)/ 240 0.45 >0.85
CRP320 SON-T 70W(E) GR 1x SON-T 70W (E)/ 240 0.45 >0.85
Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume 3per box (mm) (kg) (kg) (m )
CRP320 SON-T 70W(E) GR 1310 19095 1 555 X 300 X 165 3.05 4.26 0.027
CRP320 SON-T 70W(E) SG 1310 19015 1 555 X 300 X 165 3.05 4.26 0.027
CRP320 SON-T 70W(E) PK 1310 19035 1 555 X 300 X 166 3.05 4.26 0.027
CRP320 SON-T 70W(E) AS 1310 19045 1 555 X 300 X 167 3.05 4.26 0.027
CRP320 SON-T 70W(E) TS 1310 19055 1 555 X 300 X 168 3.05 4.26 0.027
125
Note : Colour coding: SG:Sea Green, PK: Pink, AS:Antique Silver, TS: Textured Silver, GR: Siemens Grey
Note : Ballast of suitable rating shall be packed separately (packing data on request)
Road Lighting
Dimensions (mm)
Skyline SGP 325
General descriptionRoad lighting luminaire suitable for use with High Pressure Sodium Vapour SON-T PLUS 150W / 250W or Metal Halide HPI-T PLUS 250W lamp or CDM-TT 150W/200W.
Features! Housing made of single piece pressure die-cast aluminium alloy with
low copper content for sturdiness and excellent corrosion resistance. Specially designed styling with powder coated finish for improved aesthetics and better environmental protection. Available in choice of colours.
! All electrical accessories such as energy efficient, low loss, open construction copper ballast, ignitor and power factor improvement capacitor are pre-wired upto the terminal block.
! The lamp compartment consists of electrochemically brightened and anodized, high purity POT reflector with a specially designed ribbed profile for better uniformity and high spacing to mounting height ratio.
! Specially designed pole mounting arrangement accommodated in a separate compartment with a cover made of engineering plastic to facilitate bottom as well as lateral pole mounting without disturbing the lamp or gear compartment.
! Multiple configurations for cover are available to suit different lamps and environmental conditions:! Clear curved polycarbonate cover (PCA) for the lamp compartment UV stabilized to avoid yellowing to ensure ingress protection of IP 65 for the lamp compartment suitable for highly polluted areas. Gear compartment cover made of engineering plastic to ensure an ingress protection classification of IP 54.! Heat resistant toughened flat glass cover (GLA) for the lamp compartment to ensure ingress protection of IP 65 for the lamp compartment suitable for highly polluted areas. Gear compartment cover made of engineering plastic to ensure an ingress protection classification of IP 54.! Single piece light stabilized clear thermoformed acrylic cover (TFA) for both lamp and gear compartment ensuring an ingress protection classification of IP 54 for both lamp and gear compartment suitable for areas with low or medium level of pollution.
! High quality long life EPDM / FELT gasket specially treated for heat resistance and insect repellence to ensure the declared level of ingress protection throughout the life of the luminaire.
! User friendly hinging arrangement for lamp and gear compartment consisting of stainless steel toggles facilitating access to lamp and gear compartment from bottom.
! Flexible optics to achieve optimum light distribution to suit different road and installation parameters.
! All electrical accessories are mounted to a removable gear plate for ease of maintenance and installation.
Applications! Major city roads! Junctions and roundabouts! Industrial areas! Car parks
Installation! Pole entry dia of max. 60 mm. O.D. Specially designed pole mounting
piece for bottom as well as lateral entry.
Compliances• IP 65
• IP 54
• Class I
IP 65
IP 54
Road Lighting
E D
C AB
GG
AB
ED
C
G
AB
ED
C
G
AB
D
C
E
Luminaire A B C D E G
SGP 325 PCA 735 635 327 178 332 170
SGP 325 GLA 735 635 327 178 195 170
SGP 325 TFA 735 635 327 178 336 170
SGP 325 PCA SGP 325 GLA
SGP 325 TFA
SGP 325 GLA
SGP 325 PCASGP 325 TFA
126
Road Lighting
Technical Data
Skyline SGP 325
Type For Lamp Nominal Mains Current Nominal Voltage (V) (A) Power Factor
SGP 325 PCA /SON-T150W 1 X SON-T 150W 220/240 0.85 >0.85
SGP 325 GLA /SON-T150W 1 X SON-T 150W 220/240 0.85 >0.85
SGP 325 TFA /SON-T150W 1 X SON-T 150W 220/240 0.85 >0.85
SGP 325 PCA /SON-T250W 1 X SON-T 250W 220/240 1.38 >0.85
SGP 325 GLA /SON-T250W 1 X SON-T 250W 220/240 1.38 >0.85
SGP 325 TFA /SON-T250W 1 X SON-T 250W 220/240 1.38 >0.85
SGP 325 PCA /HPI-T250W 1 X HPI-T 250W 220/240 1.38 >0.85
SGP 325 GLA /HPI-T250W 1 X HPI-T 250W 220/240 1.38 >0.85
Ordering Data
Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume 3per box (mm) (kg) (kg) (m )
SGP 325 PCA /SON-T150W 1310 11925 1 805 x 425 x 400 5.40 7.80 0.139
SGP 325 PCA/SON-T250W 1310 11935 1 805 x 425 x 400 5.40 7.80 0.139
SGP 325 PCA/HPI-T250W 1310 11945 1 805 x 425 x 400 5.40 7.80 0.139
SGP 325 GLA/SON-T150W 1310 11965 1 795 x 420 x 220 5.78 8.00 0.073
SGP 325 GLA/SON-T250W 1310 11975 1 795 x 420 x 220 5.78 8.00 0.073
SGP 325 GLA/HPI-T250W 1310 11985 1 795 x 420 x 220 5.78 8.00 0.073
SGP 325 TFA/SON-T150W 1310 13745 1 795 x 420 x 220 5.50 8.20 0.073
SGP 325 TFA/SON-T250W 1310 13755 1 795 x 420 x 220 5.50 8.20 0.073
127
Note : Ballast of suitable rating shall be packed separately (packing data on request)
SRP 51
Road Lighting
129
Road Lighting
Dimensions (mm)
SRP 51
General DescriptionRoad lighting luminaire suitable for use with High Pressure Sodium Vapour SON/SON-T 150W/250W lamp.
Features! All electrical accessories such as energy efficient copper ballast,
electronic ignitor, power factor improvement capacitor etc., are pre-wired upto a terminal block and mounted on a easily detachable gear plate
! Flexible optics for energy efficient SON/SON-T lamp to achieve optimum light distribution for most of the roads / installation parameters
! Hinging arrangement for thermoformed acrylic bowl for ease of maintenance
! Single piece die-cast aluminium (LM6) housing powder coated in attractive grey colour outside
! High quality long lasting felt gasket impregnated with insecticides and water repellant chemicals on the periphery of the housing
! High purity aluminium POT reflector, electrochemically brightened & anodised
! Hinging arrangement with a set of nylon chords for acrylic bowl! Stainless steel toggles for fixing acrylic bowl to the housing! Conformance to IP 54 protection for lamp and gear compartment! Conformance to relevant IS specifications
Applications! Major city roads! Roundabouts! Industrial areas! Car parks
Installation ! Pole entry through U clamps suitable for pole diameter of maximum
Ø60mm.
SRP 51
647
365
60
365
Road Lighting
IP 54
SRP 51
Compliances• IP 54
• Class I
128
Ordering Data Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume
3per box (mm) (kg) (kg) (m )
SRP 51 150W housing 1310 12585 1 660 x 385 x 195 5.25 x 1 6.60 6.60
SRP 51 250W housing 1310 12535 1 660 x 385 x 195 5.25 x 1 6.60 6.60
SRP 51 acrylic cover 1310 12565 10 710 x 402 x 502 0.90 x 10 9.50 9.50
Technical Data
Type For Lamp Nominal Mains Current Nominal Voltage (V) (A) Power Factor
SRP 51/250W 1 x SON/SON-T 250W 240 1.40 ≥ 0.85
SRP 51/150W 1 x SON/SON-T 150W 240 0.85 ≥ 0.85
Note : Ballast of suitable rating shall be packed separately (packing data on request)
Road Lighting
Dimensions (mm)
H/SRX 51
H/SRX 51
General DescriptionRoad lighting luminaire suitable for use with High Pressure Sodium Vapour SON/SON -T 150W/250W, High Pressure Mercury Vapour HPL -N 250W & High Pressure Metal Halide HPI-T 250W lamps.
Features! All electrical accessories such as energy efficient copper ballast,
electronic ignitor, power factor improvement capacitor etc., are pre-wired to a terminal block
! Flexible optics to achieve optimum light distribution for most of the roads / installation parameters
! Heat resistant and toughened glass cover for minimising discomfort glare to vehicular traffic
! Lamp compartment consists of high purity aluminium pot reflector, electrochemically brightened & anodised inside, powder coated in an attractive grey colour outside
! High quality long lasting felt gasket impregnated with insecticide and water repellant chemical on the periphery of the lamp compartment.
! Die cast aluminium (LM6) gear compartment; powder coated outside! Stainless steel toggles for fixing glass cover to lamp compartment ! Hinging arrangement for glass cover for ease of maintenance! Option for side as well as pole top mounting! Conformance to IP 54 protection for lamp compartment and
IP 33 for gear compartment! Conformance to relevant IS specifications
360 380
740
300 130
180140
Road Lighting
Applications! Major city roads !
!
Roundabouts Industrial areas
! Car parks
Installation ! Pole entry through U clamps suitable for pole diameter of maximum
Ø60mm.
IP 54
IP 33
Lamp Compartment
Gear Compartment
H/SRX 51
130
H/SRX 51
Road Lighting
Technical Data
Ordering Data
131
Type For Lamp Nominal Mains Current Nominal Voltage (V) (A) Power Factor
SRX 51 1 x SON/SON-T 150W 240 0.85 0.85
SRX 51 1 x SON/SON-T 250W 240 1.40 0.85
HRX 1 x HPL-N 250W 240 1.35 0.85
Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume 3per box (mm) (kg) (kg) (m )
SRX 51/150W housing with cover 1310 12845 1 810 x 372 x 250 4.75 x 1 6.52 0.077
SRX 51/250W housing with cover 1310 12745 1 810 x 372 x 250 4.75 x 1 6.52 0.077
HRX 51/250 W housing with cover 1310 46505 1 810 x 372 x 250 4.75 x 1 6.52 0.077
Note : Ballast of suitable rating shall be packed separately (packing data on request)
Technical Data
Type For Lamp Nominal Mains Current Nominal Voltage (V) (A) Power Factor
SRP 202/150W 1 x SON 150W 240 0.85 ≥ 0.85
SRP 202/250W 1 x SON 250W 240 1.40 ≥ 0.85
HRP 202/250W 1 x HPL-N 250W 240 1.35 ≥ 0.85
H/SRP 202
Road Lighting
133
Road Lighting
Dimensions (mm)
H/SRP 202
H/SRP 202
General DescriptionRoad lighting luminaire suitable for use with High Pressure Sodium Vapour SON 150W/250W & High Pressure Mercury Vapour HPL -N 250W lamp.
Features! All electrical accessories such as energy efficient copper ballast,
electronic ignitor, power factor improvement capacitor etc., are pre-wired to a terminal block
! Single piece die-cast aluminium (LM6) housing powder coated in attractive grey colour outside
! High quality electrochemically brightened and anodised faceted Aluminium reflector for optimum light distribution with ovoid SON lamps
! High quality long lasting felt gasket impregnated with insecticide & water repellent chemical on the periphery of the housing
! Stainless steel toggles for fixing UV stablilised acrylic bowl to housing.! Stainless steel slide lock arrangement for retention of acrylic bowl
with housing! Powder coated metallic gear compartment cover! Hinging arrangement for acrylic bowl for ease of maintenance! Retention of gear compartment lid with the housing during
maintenance / installation! Conformance to IP 54 protection for lamp and IP 33 protection
for gear compartment ! Conformance to relevant IS specifications
Applications! Major city roads ! Roundabouts ! Industrial areas ! Car parks
Installation ! Pole entry through U clamps suitable for pole diameter of maximum
Ø60mm.
Road Lighting
H/SRP 202
Compliances• IP 54
• Class I
IP 54
132
Ordering Data
Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume 3per box (mm) (kg) (kg) (m )
SRP 202/150W housing 1310 12425 2 820 x 520 x 130 5.11 x 2 6.70 0.134
SRP 202/250 W housing 1310 12415 2 820 x 520 x 130 5.11 x 2 6.70 0.134
HRP 202/250W housing 1310 12405 2 820 x 520 x 130 5.11 x 2 6.70 0.134
H/SRP 202 acrylic cover 1310 12495 10 535 x 535 x 250 0.60 x 10 7.50 0.072
Note : Ballast of suitable rating shall be packed separately (packing data on request)
Road Lighting
Dimensions (mm)
H/SRP 21
General DescriptionRoad lighting luminaire suitable for use with High Pressure Sodium Vapour SON 400W & High Pressure Mercury Vapour HPL-N 400W lamp.
SRP 21 for SON 400W
HRP 21 for HPL-N 400W
Features! All electrical accessories such as energy efficient copper ballast,
electronic ignitor, power factor improvement capacitor etc., are pre-wired upto a terminal block and mounted on an easily detachable gear plate
! High quality electrochemically anodised & brightened faceted aluminium reflector for optimum light distribution with SON 400W / HPL-N 400W lamp
! Single piece die-cast aluminium (LM6) housing powder coated in attractive grey colour outside
! High quality long lasting felt gasket impregnated with insecticide and water repellant chemical on the periphery of the housing
! Stainless steel side lock arrangement for retention of acrylic bowl with the housing
! Powder coated metallic gear compartment cover! Hinging arrangement for acrylic bowl for ease of maintenance! Conformance to IP 54 protection for lamp compartment and IP 33
protection for gear compartment! Conformance to relevant IS specifications
Applications! Major city roads! Roundabouts! Highways! Industrial areas! Car parks
Installation
! Pole entry through U clamps suitable for pole diameter of maximum Ø60mm.
H/SRP 21
Road Lighting
H/SRP 21
Compliances• IP 54
• Class I
IP 54
134
H/SRP 21
Road Lighting
135
Ordering Data
Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume 3per box (mm) (kg) (kg) (m )
SRP 21 400W housing 1310 12515 1 835 x 600 x 205 7.20 x 1 7.80 0.103
HRP 21 400W housing 1310 11315 1 835 x 600 x 205 7.20 x 1 7.80 0.103
Acrylic cover 1310 11405 10 630 x 530 x 345 0.90 x 10 9.50 0.115
Technical Data
Type For Lamp Nominal Mains Current Nominal Voltage (V) (A) Power Factor
SRP 21 400W 1 x SON 400W 240 2.25 ≥ 0.85
HRP 21 400W 1 x HPL-N 400 W 240 2.15 ≥ 0.85
Note : Ballast of suitable rating shall be packed separately (packing data on request)
Dimensions (mm)
Road Lighting
SGP 438
Road Lighting
General Description
Features•
•
•
••
•
•
•
•
Applications•••••
Installation•
Compliances• IP 66
• Class I
Road lighting luminaire, aerodynamically shaped single piece pressure die cast aluminum housing, toughened glass cover, special BR - POT optics, IP 66 ingress protection, special PUL coating for improved aesthetics, suitable for SON-T/HPI-T/CDM-TT upto 250W.
IP 66 ingress protection level for lamp as well as gear compartment eliminates dust and water ingress offering improved & maintained protection from weather
Aerodynamically shaped single piece pressure die-cast aluminium
construction make Secura robust & sturdy
Special mounting system of luminaire holds the luminaire weight from its
centre of gravity which offers most reliable & extra safe luminaire
mounting. It leads to no vibrations and minimises pendulum effect
Compact in size makes it easy to handle
Special PUL treatment of housing offers aesthetically appealing and
elegant appearance
Bottom cover comprises of toughened glass with patterned grey paint
for glare free light distribution on the road
Specially developed state-of-the-art BR ‘POT’ optics which has
excellent light distribution and efficiency. It provides uniform distribution
of light and allows higher pole to pole spacing
Luminare is suitable for wide range of lamps starting from SON to
CDM-TT providing Son yellow light to crisp white light
All hardwares - outer toggles and hinges are made up of weather proof
stainless steel construction for increased life and weather ability
Major city roads
Car parks
Junctions, roundabouts
Open yards
Industrial Areas
Suitable for pole entry outer dia of 48 to 60 mm
SGP 438
Secura SGP 438
282
544.5
180
IP 66
136
Technical Data
Ordering Data
Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume 3per box (mm) (kg) (kg) (m )
SGP438 1XSON-T 250W 1350 17775 2 305 X 305 X 650 4.20 X 2 10.00 0.0605
SGP438 1XSON-T250W 1350 17785 2 305 X 305 X 650 4.20 X 2 10.00 0.0605
Secura SGP 438
Type For Lamp Nominal Mains NominalVoltage (V) Current (A) Power Factor
SGP438 1XSON-TW 1 X SON-T/CDM-TT/HPI-T 250W 240 1.40 > 0.85
SGP438 1XSON-T 150W 1 X SON-T/CDM-TT 150W 240 0.85 > 0.85
Road Lighting
137
Note : Ballast of suitable rating shall be packed separately (packing data on request)
Dimensions (mm)
Esplanade SGP 401Road Lighting
SGP 401
Road Lighting
General DescriptionRoad Lighting luminaire suitable for use with High-Pressure Sodium Vapour lamp SON-T 150/250 W or Metal Halide Lamp CDM-TT 150/250 W.
Features• Housing made of single piece High-Pressure die-cast aluminium alloy
with low copper content for sturdiness and excellent corrosion resistance. Specially designed styling with powder coated finish for improved aesthetics and better environmental protection.
• All electrical accessories such as energy efficient, low loss, open construction copper ballast, ignitor and powder factor improvement capacitor are pre-wired upto the terminal block.
• The lamp compartment consists of electrochemically brightened and anodized, high purity POT reflector for efficient distribution.
• Heat resistance toughened flat glass cover for glare free lighting.
• The flat glass cover is fixed to the housing with two number stainless steel hinges and three number stainless steel clips for maintained contact pressure throughout life-offering IP 65 level of ingress protection for the lamp as well as gear compartment ensuring long life of components and maintained efficiency of light distribution.
• The hinging mechanism of the flat glass cover retains the cover when it is opened resulting in ease of maintenance.
• The specially designed pole mounting mechanism ensures secure 0mounting even in high winds and offers a built in tilt of 5 to ensure
proper light. Suitable for pole entry diameter of 50 to 60 mm.
• Specially designed extruded EPR gasket ensures the declared level of ingress protection throughout the life of the luminaire.
Applications• Major city roads
• Junctions and roundabouts
• Industrial areas
• Car parks and other open areas
Installation• Pole entry dia of 50 to 60mm. O.D.
Compliances• IP 65
• Class I
SGP 401
282
544.5
180
IP 65
138
Technical Data
Ordering Data
Type Ordering No Quantity Dimensions Net Weight Volume 3per box (mm) (kg) (m )
SGP 401/SON-T-250W 1310 40405 1 550 x 290 x 190 3.50 0.03
SGP 401/SON-T-150W 1310 40415 1 550 x 290 x 190 3.50 0.03
Esplanade SGP 401
Type For Lamp Nominal Mains NominalVoltage (V) Current (A) Power Factor
SGP 401/SON-T-250W SON-T / HPI-T / CDM-TT 250W 240 1.40 > 0.85
SGP 401/SON-T-150W SON-T / CDM-TT 150W 240 0.85 > 0.85
Road Lighting
139
Note : Ballast of suitable rating shall be packed separately (packing data on request)
Ordering Data
Dimensions (mm)
SGP 301 CelesteRoad Lighting
SGP 301
Road Lighting
SGP 301
IP 65
485.2 485.2
179.7
138.9
140
Road Lighting
Technical Data
SGP 301 Celeste
141
Type For Lamp Nominal Mains NominalVoltage (V) Current (A) Power Factor
SGP 301/ SON-T 70W (E) SON-T 70W (E) 240 0.45A 0.85
SGP 301/ SON-T 70W (I) SON-T 70W (I) 240 0.45A 0.85
SGP 301/ CDM-TT 70W CDM-TT 70W 240 0.45A 0.85
SGP 301/ CPO-T 60W CPO-T 60W 240 0.30A 0.98
General DescriptionCompact and sturdy low wattage street lighting luminaire suitable for use with tubular high pressure sodium vapour lamps SON-T 70W (E/I). The luminaire can also be used with ceramic discharge metal halide lamp CDM TT 70W and Cosmopolis lamp CPO - T 60W.
Features• High pressure die cast aluminum housing accommodating lamp as
well as gear compartment.
• All accessories such as ballast, ignitor, power factor improvement capacitor are prewired upto the terminal block and mounted on a high pressure die cast aluminium frame.
• Top opening gear compartment for ease of maintenance with hinging mechanism and single clip fastening.
• IP 65 ingress protection with polycarbonate as well as flat glass cover. In case of polycarbonate cover the edges of the cover should be enclosed inside the luminaire to ensure the required IP.
• Lateral as well as pole top mounting with built in tilt of 5 degrees.
• Specially designed optics for tubular high pressure sodium vapour lamp.
• Suitable for ceramic discharge tubular metal halide lamp.
• Luminaire should be recommended with tubular lamp to achieve the best photometric results.
• Compact and aesthetically appealing looks.
Applications• Secondary roads
• Malls, shopping & pedestrian areas
• Parks and gardens
• Parking lots and other open areas
• Industrial areas
Installation• Luminaire is opened by 1 toggle on frame and fixed to the pole by
tightening 2 screws
Compliances• IP 65
• Class I
Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume 3per box (mm) (kg) (kg) (m )
SGP 301_GLA_SON70W(E) 1310 10105 4 560 x 490 x 292 2.20 10.30 0,08
SGP 301_GLA_SON70W(I) 1310 13165 4 560 x 490 x 292 2.20 10.30 0.08
SGP 301_PCA_SON70W(E) 1310 13145 4 560 x 490 x 292 2.20 10.30 0.08
SGP 301_PCA_SON70W(I) 1310 13155 4 560 x 490 x 292 2.20 10.30 0.08
SGP 301_GLA_CPO_T 60W 1350 27955 4 560 x 490 x 292 2.83 14.30 0.08
Note : Ballast of suitable rating shall be packed separately (packing data on request)