phase2HIGH-VOLTAGE GAIN DC–DC CONVERTERS BASED ON 3SSC AND VMC
4
HIGH-VOLTAGE GAIN DC–DC CONVERTERS BASED ON 3SSC AND VMC The MATLAB/SIMULINK model of the DC-DC converter with three state switching cell and voltage multiplier cell is as shown in figure 1.Input to the converter is fixed that is 48V DC and obtain an output 400V fixed dc voltage. The input and output wave forms also shown below. The converter consists of two MOSFET switches. The switching pulse given to the converter is by pulse generator. The switching frequency is 25kHz.and pulse width is 75%.the switching pulse is 180 degree displaced. The converter parameter values are given the table.
-
Upload
gayathri-devi -
Category
Documents
-
view
213 -
download
0
description
HIGH-VOLTAGE GAIN DC–DCCONVERTERS BASED ON 3SSC AND VMC
Transcript of phase2HIGH-VOLTAGE GAIN DC–DC CONVERTERS BASED ON 3SSC AND VMC
HIGH-VOLTAGE GAIN DC–DC
CONVERTERS BASED ON 3SSC AND VMC
The MATLAB/SIMULINK model of the DC-DC converter with three state switching cell and voltage multiplier cell is as shown in figure 1.Input to the converter is fixed that is 48V DC and obtain an output 400V fixed dc voltage. The input and output wave forms also shown below. The converter consists of two MOSFET switches. The switching pulse given to the converter is by pulse generator. The switching frequency is 25kHz.and pulse width is 75%.the switching pulse is 180 degree displaced. The converter parameter values are given the table.
Figure.1 Simulink Model Of The DC-DC Boost Converter With 3SSC And VMC
Figure.2 48V DC Input voltage
Figure.3 Obtained 400V DC Output voltage
Converter Parameter Values
Input Voltage 48V
Output Voltage 400V
Load 400Ohm
Inductance L 70μF
C1 and C2 4.5μF
C3 and C4 3μF
C5 and C6 1.5μF
