PH300 Modern Physics SP11
description
Transcript of PH300 Modern Physics SP11
![Page 1: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/1.jpg)
1
PH300 Modern Physics SP11
2/15 Day 9: Questions?Exam 1Photoelectric Effect
Thursday: Photoelectric Effect
(continued)
“Anyone who has never made a mistake has never tried anything new.” - Albert Einstein
![Page 2: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/2.jpg)
2
Summary from last time…• Scientists “make up” theories to explain the
evidence they see.• These theories are constrained by experiment.• We can’t always open up the seed and look
inside. Have to make inferences from indirect evidence.
• A theory with a plausible mechanism is more convincing than a rote algorithm.
• The more different cases our theory works on, the more we believe it.
• But it could always be wrong…
![Page 3: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/3.jpg)
The Photoelectric Effect
The photoelectric effect is a phenomenon in which electrons are emitted from a metal as a consequence of the electrons absorbing energy from light.
The effect was only observed with UV light, but not so with red or IR light. Effect is frequency dependent!?
But Maxwell told us that the light intensity doesn’t depend on frequency! (Intensity only depends on |E|2)
![Page 4: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/4.jpg)
Experimental apparatus: PE effect
Metal surface
Vacuum
Glass cylinder
![Page 5: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/5.jpg)
Experimental apparatus: PE effect
Metal surface
Vacuum
Glass cylinder
Adjustable voltage
Current meter
![Page 6: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/6.jpg)
What happens?
Two metal plates in vacuum with a voltage between them.
How much current is flowing through the resistor?A) 0 AB) 0.2 AC) 5 AD) 10 AE) infinite current
10 V
A B
+-2 ohms
Answer: (A) 0 amps. No electrons there to move. Note: different from resistor across gap.
![Page 7: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/7.jpg)
When does an electric field exert a force on a charge?
A) AlwaysB) Sometimes (depends on the charge)C) Sometimes (need an oscillating E-field)D) Sometimes (depends on many things)E) Never
![Page 8: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/8.jpg)
An electric field ALWAYS exerts a forceon any charge!
In the absence of a magnetic field:Force = charge x electric field
rF =q⋅
rE
rFq =q
rE +
rv×rB( ) Lorentz force law
![Page 9: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/9.jpg)
Photoelectric effect experiment apparatus.
10 V
A B
Potential difference between A and B =
a. 0 V, b. 5 V, c. 10 V d. infinite volts+-
Two metal plates in vacuum, adjustable voltage between them, shine light on one plate. Measure current between plates.
![Page 10: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/10.jpg)
10Volts0V
10V
Constant force on electron constant acceleration
E+++++
Current = 0 A
Potential difference between A and B is 10 VWithout light, no electrons can get across gap.But if we put an electron near the surface of plate A it 'feels' the electric field between the two plates.The electron accelerates towards the positive plate (B) and picks up the energy ΔE=qΔV= q(10V) = 1 electron charge x 10 V = 10 eV
B
- 10V +
Uniform E-field between plates 0V
A
Current = 0.1 A
F=qE
![Page 11: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/11.jpg)
1V+
A note about units of energyJoules are good for macroscopic energy conversions. But when talking about energy of single electrons,
Joules are inconvenient… (way too big!)
EF
0V 1V
path
++++
1eV ≈ 1.6·10-19 J
Define new energy unit: The electron-volt (eV) 1eV = kinetic energy gained by an electron when accelerated through 1 volt of potential difference
![Page 12: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/12.jpg)
How to put the e- close to plate A?
Metal surface
Vacuum
Glass cylinder
Adjustable voltage
Current meter
A B
Shine light on the plate!!
Electrons get pulled towards plate B by
the electric fieldF = E·qe-
+++++
![Page 13: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/13.jpg)
First we could argue that the light heats up the plate electrons pop-out
Measure the current!
![Page 14: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/14.jpg)
Experimental apparatus: PE effect
Measure the current!
Play with color and intensity & measure current.
I : # e− s
![Page 15: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/15.jpg)
pump
Swimming Pool Analogy If no water slops over side of pool, no flow. Little pump or big pump, still no water current. Similar to:If electrons stuck inside metal plate, no current for little or big V.
Pool party: put bunch of energy into water, splash some out,get flow through pump.Put energy into metal by heating it very hot,gives electrons energy, some “splash” out. Gives current.
?
![Page 16: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/16.jpg)
Hot plate.A few electrons get enough energy to just barely “splash” out.
What is the current vs. battery voltage?
0 Voltage
Curre
nt
C
0 Voltage
Cur
rent
A
0 VoltageCu
rrent
B
0 Voltage
Curre
nt
D
![Page 17: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/17.jpg)
0 Battery Voltage
Cur
rent
Each electron that pops out is accelerated and hits the plate on the right side.
BUT: # of electrons = constant sec
So current is constant!
What’s happening here?
reverse V,no electronsflow.
Vacuum tube diode!- early electronic device.
not I = V / R !!
Here, electrons are repelled by neg. electrode
![Page 18: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/18.jpg)
Vacuum tube diode
Cur
rent
reverse V,no electronsflow.
voltage
![Page 19: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/19.jpg)
0 VoltageCu
rrent
ElectronsTest metal
Photolelectric effect experiment apparatus.
So if light is classical wave, predict that it puts energy into plate, heats up, get diode current voltage curve.
Also takes time to heat up.• Light on longer, heat more, e’s out faster = more current.• Color (frequency) of light does not matter,
only intensity.
![Page 20: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/20.jpg)
Recap for today. We know:I. How apparatus works.
II. What would expect to see from classical wave view: previous experiments like double slit interference, heating
barrels, etc.• Current vs voltage step near zero then flat.• Color light does not matter, only intensity.
• Takes time to heat up ⇒ current low and increases with time.• Increase intensity, increase current.questions?
III. Do actual experiment, see if agrees with prediction. I vs V (current vs. voltage) How does this depends on intensity and color of light?
http://phet.colorado.edu/simulations/photoelectric/photoelectric.jnlp
0 Voltage
Curre
nt
![Page 21: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/21.jpg)
I
e’s
First experiment- I vs. V high intensity, low intensitySecond experiment- I vs. V two different colors
write down what happens
![Page 22: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/22.jpg)
I
e’s
HIGH intensity
0 Battery Voltage
Ivoltage to turn aroundmost energetic electron“stopping potential”
![Page 23: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/23.jpg)
0 Batt. V I
0 Batt. V
I
0 Batt. V
I
0 Batt. V
I
Which graph represents low and high intensity curves?
0 Batt. V
I
A B
C D
F
![Page 24: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/24.jpg)
I
e’s
HIGH intensity LOW intensity
0 Battery Voltage
I
Fewer electrons pop off metal Current decreases.Current proportional to light intensity.
ans. B
![Page 25: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/25.jpg)
I
e’s
HIGH intensity LOW intensity
0 Battery Voltage
I
Same KE electrons popping off metal. So same “stopping potential”.
![Page 26: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/26.jpg)
Predict what happens to the initial KE of the electrons as the frequency of light changes? (Light intensity is constant)
Predict shape of the graph
I
e’s
0 Frequency of light
Ini
tial K
E
![Page 27: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/27.jpg)
0 Frequency
Ini
tial K
E
0 Frequency
Ini
tial K
E
0 Frequency I
nitia
l KE
0 Frequency
Ini
tial K
EA B
C D
E. something different
![Page 28: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/28.jpg)
I
e’s
0 Frequency of light
Ini
tial K
E
As the frequency of light increases (shorter wavelength), the KE of electrons being popped off increases. (it is a linear relationship)
There is a minimum frequency below which the light cannot kick out electrons… even if wait a long time
Correct answer is D.
What about different metals?
![Page 29: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/29.jpg)
Putting these together
• How does stopping potential (Voltage) relate to KE (of electrons)
• Precise relation in a minute:– Note: One is positive and relates to electrons (KE)– The other negative and what it takes to stop electrons
0 Frequency of light Ini
tial K
E
0 Battery Voltage
I
low intensityhigh intensity
![Page 30: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/30.jpg)
Summary of Phot. Electric experiment results.(play with sim to check and thoroughly understand)
1. Current linearly proportional to intensity.
2. Current appears with no delay.
3. Electrons only emitted if frequency of light exceeds a threshold. (same as “if wavelength short enough”).
4. Maximum energy that electrons come off with increases linearly with frequency (=c/wavelength).
(Max. energy = -stopping potential)
5. Threshold frequency depends on type of metal.
how do these compare with classical wave predictions?
http://phet.colorado.edu/simulations/photoelectric/photoelectric.jnlp
![Page 31: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/31.jpg)
Classical wave predictions vs. experimental observations
• Increase intensity, increase current.experiment matches
• Current vs voltage step near zero then flat.(flat part matches, but experiment has tail of energetic electrons, energy of which depends on frequency)
• Frequency does not matter, only intensity.experiment shows strong dependence on frequency
• Takes time to heat up ⇒ current low and increases with time.experiment: electrons come out immediately, no time delay to heat up
![Page 32: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/32.jpg)
Summary of what we know so far: 1. If light can kick out electron, then even smallest intensities of that
light will continue to kick out electrons. KE of electrons does not depend on intensity.
2. Lower frequencies of light means lower initial KE of electrons & KE changes linearly with frequency.
3. Is minimum frequency below which light won’t kick out electrons.
(Einstein) Need “photon” picture of light to explain observations:- Light comes in chunks (“particle-like”) of energy (“photon”)- a photon interacts only with single electron - Photon energy depends on frequency of light, … for lower frequencies, photon energy not enough to free an electron
![Page 33: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/33.jpg)
Kicker analogy: a ball in a pit
Light like a Kicker… Puts in energy. All concentratedon one ball/electron.Blue kicker always kicks the same, KE = kick energy - mgh
Ball emerges with:
mgh = energy needed to make it up hill and out.mgh for highest electronanalogous to work function.
Kick energy. Top onesget out, bottom don’t.Harder kick (shorterwavelength light), more get out. metal
electrons
and harder than red kicker always kicks.
![Page 34: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/34.jpg)
Light like a Kicker… Puts in energy. All concentratedon one ball/electron.Blue kicker always kicks the same,and harder than red kicker always kicks.
KE = kick energy - mghBall emerges with:
platinum, hard to kick outlarge work function Φ = deep pit
h
sodium- easy to kick out
h
small work function Φ = shallow pit
energy needed to get mostenergetic electron out of pit(“work function”)
Kicker analogy: a ball in a pit
![Page 35: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/35.jpg)
Photon… Puts in kick of energy
If photon has enough energy, electron emerges with: KE = photon energy – work function
energy needed to kickhighest electron out of metal. “WORK FUNCTION” (Φ)
Each photon has: Energy =h f = Planks constant * Frequency (Energy in Joules) (Energy in eV)
E=hf=(6.626*10-34 J-s)*(f s-1) E=hf= (4.14*10-15 eV-s)*(f s-1)E=hc/λ = (1.99*10-25 J-m)/(λ m) E= hc/λ = (1240 eV-nm)/(λ nm) Initial KE of electron = Ephoton - energy needed to kick as it comes out of metal electron out of metal
Depends on type of metal.
![Page 36: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/36.jpg)
Typical energiesPhoton Energies:
Work functions of metals (in eV): Aluminum 4.08 eV Cesium 2.1 Lead 4.14 Potassium 2.3Beryllium 5.0 eV Cobalt 5.0 Magnesium 3.68 Platinum 6.35
Cadmium 4.07 eV Copper 4.7 Mercury 4.5 Selenium 5.11Calcium 2.9 Gold 5.1 Nickel 5.01 Silver 4.73Carbon 4.81 Iron 4.5 Niobium 4.3 Sodium 2.28
Uranium 3.6
Zinc 4.3
Red Photon: 650 nm Ephoton = 1240 eV-nm = 1.91 eV 650 nm
Each photon has: Energy =h f = Planks constant * Frequency (Energy in Joules) (Energy in eV)
E=hf=(6.626*10-34 J-s)*(f s-1) E=hf= (4.14*10-15 eV-s)*(f s-1)E=hc/λ = (1.99*10-25 J-m)/(λ m) E= hc/λ = (1240 eV-nm)/(λ nm)
![Page 37: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/37.jpg)
A photon at 300 nm will kick out an electron with an amount of kinetic energy, KE300. If the wavelength is halved and it hits an electron in the metal with same energy as the previous electron, the energy of the electron coming out is…
a. less than ½ KE300.b. ½ KE300
c. = KE300
d. 2 x KE300
e. more than 2 x KE300
(remember hill analogy, draw pictures to reason out answer,don’t just pick answer without careful reasoning)
KE300
V
![Page 38: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/38.jpg)
CQ: A photon at 300 nm will kick out an electron with an amount of kinetic energy, KE300. If the wavelength is halved and it hits an electron in the metal with same energy as the previous electron, the energy of the electron coming out is
e. more than 2 x KE300
KE300
V
KE = photon energy-energy to get out = hf – energy to get outif λ is ½ then, f twice as big, Ephot =2hf300
New KEnew= 2hf300- energy to get out
Old KE300 =hf300- energy to get out
so KEnew is more than twice as big.
hf300
KE300
hf150
Ene
rgy
![Page 39: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/39.jpg)
Photoelectric effect experiment: Apply Conservation of Energy
Inside metal
work function (Φ) = energy needed to kick most energetic e- out of metal
Energy in = Energy outEnergy of photon = energy needed to kick + Initial KE of electron
electron out of metal as exits metal
Loosely stuck electron, takes least energy to kick out
Tightly stuck, needs more energy to escape
Outside metal
Ele
ctro
n P
oten
tial
Ene
rgy Warning!!
This is not deeper in metalIt is more tightly bound!
![Page 40: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/40.jpg)
Apply Conservation of Energy.
Inside metal
work function (Φ)Outside metal
What happens if send in bunch of blue photons?
Electrons have equal chance of absorbing photon: Max KE of electrons = photon energy - Φ Min KE = 0 Some electrons, not enough energy to pop-out, energy into heat.
Ephoton
Photon gives electron “kick of energy”.
Ele
ctro
n P
oten
tial
Ene
rgy
Energy in = Energy outEnergy of photon = energy needed to kick + Initial KE of electron
electron out of metal as exits metal
![Page 41: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/41.jpg)
Electrons over large range of energy have equal chance of absorbing photons.
Insidemetal
Ele
ctro
n po
tent
ial
ener
gy
You initially have blue light shining on metal. If you change the frequency to violet light (at same # of photons per second), what happens to the number of electrons coming out?
a. fewer electrons kicked outb. same # of electronsc. more electrons kicked outd. not enough information
work function ΦEphot
Ephot
![Page 42: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/42.jpg)
Shine in light of 300 nm. The most energetic electrons come out with kinetic energy, KE300. A voltage diff of 1.8 V is required to stop these electrons. What is the work function Φ for this plate? (e.g. the minimum amount of energy needed to kick electron out of metal?)
a. 1.2 eVb. 2.9 eVc. 6.4 eVd. 11.3 eVe. none of the above
KE300
V
![Page 43: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/43.jpg)
KE300
V
a. 1.2 eVb. 2.9 eVc. 6.4 eVd. 11.3 eVe. none
Energy is conserved so:the energy at the start (Ephot) = energy at endEphot= energy of the electron + energy to escape metal
so Φ= Ephot - electron energy but electron energy = e x 1.8V = 1.8 eV, andEphot = 1240 eV nm/300 nm = 4.1 eV.
So Φ = 4.1eV - 1.8 eV = 2.3 eV
Shine in light of 300 nm, most energetic electrons come out with kinetic energy, KE300. A voltage diff of 1.8 V is required to stop these electrons. What is the work function Φ for this plate? (e.g. the minimum amount of energy needed to kick e- out of metal?)
![Page 44: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/44.jpg)
Photomultiplier tubes- application of photoelectric effectmost sensitive way to detect visible light, see single photons (eye is incredibly good, can see a few photons)
What would be the best choice of these materials to make this out of?a. Platinum Φ = 6.35 eVb. Magnesium = 3.68 eVc. Nickel = 5.01 eV d. lead = 4.14 eV e. Sodium = 2.28 eV
electronamplifier, gives pulse of current for each photoelectron
big voltage
glass vacuum enclosure
curr
ent
Time (millisec)1 2 3 4 5
B
curr
ent
Time (millisec)1 2 3 4 5
B
![Page 45: PH300 Modern Physics SP11](https://reader035.fdocuments.us/reader035/viewer/2022081507/56816766550346895ddc4971/html5/thumbnails/45.jpg)
Photomultiplier tubes- application of photoelectric effectmost sensitive way to detect visible light, see single photons (eye is incredibly good, can see a few photons)
What would be the best choice of these materials to make this out of?a. Platinum Φ = 6.35 eVb. Magnesium = 3.68 eVc. Nickel = 5.01 eV d. lead = 4.14 eV e. Sodium = 2.28 eV
electronamplifier, gives pulse of current for each photoelectron
big voltage
glass vacuum enclosure
e. sodium. 2.28 eVlower work function meansmost visible light (<544 nm) will bedetected. Enough energy to eject electrons.