PH FireProducts Sep
description
Transcript of PH FireProducts Sep
Corporate offiCes2 Holland WayExeter, NH 03833Tel: 603-418-2800Fax: 603-418-2833E-mail: [email protected]
U.S. Regional SeRvice centeRSnorthern RegionRegional Distribution & Customer Service Center7979 W. 183rd Street, Tinley Park, IL 60477Tel: 708-885-3000Fax: 708-534-5441Toll Free: 1-800-301-2701
Southern RegionRegional Distribution & Customer Service Center1401 Valley View Lane, Suite 150, Irving, TX 75061Tel: 972-871-1206Fax: 972-641-8946Toll Free: 1-800-451-4414
canada SeRvice centeRanvil international canadaCustomer Service Center390 Second Avenue, P.O. Box 40, Simcoe, Ontario N3Y 4K9Tel: 519-426-4551Fax: 519-426-5509
inteRnational SaleSeurope and Middle east RegionRick van [email protected]: +31-53-5725570Fax: +31-53-5725579
Mexico, Puerto Rico and latin america RegionInternational Customer ServiceTel: +1-708-885-3000Fax: +1-708-534-5441
B U I L D I N G C O N N E C T I O N S T H A T L A S T
North Alabama Pipe
www.anvilintl.com
SePteMBeR 2013For the most current product/pricing information on Anvil products, please visit our website at www.anvilintl.com
fire productsPipe Hangers • Supports • Seismic Bracing
#182/Printed in USA/© Copyright 2013Revision Date: 9.17.13
Fire Protection Installations• UL/ULC • OSHPD Pre-approved SupportsRefer to catalog for listings and approvals
b r a n d s o f a n v i l i n t e r n at i o n a l
North Alabama PipeFounded in 1983, NAP is a manufacturer of fabrication equipment, including automatic welders, plasma cut-off equipment, hole cutting equipment, make-on machines and pipe threaders. NAP, innovators of pipe fabrication equipment.
Anvil® product lines include malleable and cast iron fittings, unions and flanges; seamless and welded steel pipe nipples; steel pipe couplings; universal anvilets; forged steel fittings and unions; pipe hangers and supports; threaded rod; and engineered hangers.
The Gruvlok® product line consists of couplings for grooved and plain-end fittings, butterfly valves and check valves; flanges; pump protection components; pipe grooving tools; as well as copper and stainless steel system components.
Anvil-Strut™ products include a complete line of channel in stock lengths of 10 and 20 feet, with custom lengths available upon request. A variety of fittings and accessories are also offered. All products can be ordered in an assortment of finishes and material choices including SupR-Green™, Zinc Trivalent Chromium, pre-galvanized, hot-dipped galvanized, electro-galvanized, aluminum, plain, and stainless steel.
JB Smith™ is the leading manufacturer of oil country tubular fittings, swages and bull plugs – all meeting API specifications. Offering tubing nipples, casing nipples as well as a full line of traditional line pipe and oil country threads in every schedule, JB Smith is the resource for all your oilfield needs.
Catawissa™ NACE and API approved wing unions for Standard Service are offered in non-pressure seal ends as well as threaded and butt weld, and are interchangeable with most leading union manufacturers. Fully traceable and available with complete mill certifications, Catawissa’s oilfield wing union product line includes the standard ball-and-cone design plus our unique Figure 300 Flat Face design, where space and pipe line separation are a consideration.
The SPF/Anvil™ product line includes a variety of internationally sourced products such as grooved couplings, fittings, cast iron, malleable iron and ductile iron threaded fittings, steel pipe nipples, as well as tee-lets.
The Merit® product line includes a variety of tee-lets and drop nipples for fire protection applications. Most Merit products are UL/ULC Listed, FM Approved, and rated from 175 to 300 psi.
Steel pipe nipples and steel pipe couplings are manufactured in accordance with the ASTM A733 Standard Specification for Welded and Seamless Carbon Steel and Stainless Steel Pipe Nipples. Steel pipe couplings are manufactured in accordance with the ASTM A865 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints. API couplings are manufactured in accordance with the API Specification for line pipe.
Canvil® manufactures low pressure hexagon reducer bushings, as well as plugs and hex caps up to 1” in diameter in various finishes including Oil Treat, Phosphate and Electro Galvanized. In addition, Canvil manufactures A105 hex or round material in class 3000 and 6000 pound, forged steel couplings and bar stock products offered as either as normalized (A105N) or non-normalized (A105) that are fully traceable for mechanicals and chemistry through our MTR program.
Anvil EPS-Engineered Pipe Supports are products used to support piping systems under thermal, seismic, and other dynamic loading conditions. The product line encompasses variable spring hangers, constant supports, sway struts and snubbers as well as standard and special design clamps. Anvil EPS brings the highest quality products and innovative engineering solutions to common and uncommon piping system problems.
fire Products - Pipe Hangers •ULandULCListed •FMApproved •SeismicSwayBrace •OSHPDManual •OPA-2804-10 •PipeBraceClamps •SeisBrace™SeismicFireProtectionDesignTool •StructuralAttachments •Restraints •SwayBraceAttachment
seis brace™Anvil'sSeismicFireProtectionDesignToolisprovidedtoourcustomersfreeofcharge. This seismic calculator tool for fire protection allows you to:
•SpecifyFMApprovalorULListedcomponents
•PerformcalculationthrougheithertheNFPA method ("Fpw") or the IBC code method ("Fp")
•Seeaselectionofproductgroupingsthat match your system design
•Generatesubmittalswithfigurenumbersfrom Anvil's seismic bracing product line including images and specifications for each product
•YoumaybegintouseSeis Brace by visiting www.seisbrace.com
Customer serviceWith four key stocking locations throughout North America, you can count on getting all of the product you need - when you need it. When you have installation questions our solid customer service personnel are there to answer all of your questions, backed by our designers or engineers we are there for you - on site if needed.
Manufacturing excellenceOurmanufacturingfacilityinHenderson,Tennesseehasover175,000squarefeet of manufacturing capability dedicated to producing a complete line of commercial,lightindustrialandindustrialPipeHangersandSupports.Theseinclude clamps, braces, inserts, rods and attachments, slides and guides to exacting industry standards and certified to ISO 9001 quality. The products manufacturedinHendersonaredesignedforuseinawidevarietyofrigidPipeHangerorSupportapplications,inmarketsincludingfireprotection,electrical,water and waste water treatment, petrochemical, seismic, industrial and commercial.SpecialfabricationisavailablefromourHendersonfacilityaswell.
PiPe Hangers, suPPorts and seisMiC braCing for fire ProteCtion
Brace SubmittalSeismic
PROJECT
Yes
2010 NFPA 13Calculation Standard:
UL Listed:
FM Approval: YesABC Warehouse
1st streetany city , CA 90058
12/11/2012
CONTRACTORENGINEERARCHITECT
FPCFPEArchitect
800-222-1234800-333-5678800-123-4567
Brace Details>Section 1
Brace Index
SWAY BRACECONNECTOR
PIPE BRACECLAMPS
SWAY BRACEATTACHMENT
STRUCTURALATTACHMENT
BRACE DESCRIPTIONDRAWING REF.BRACE NAME
Fig 770Fig 771Fig 778Braced pipe: 15', Schedule 40, 2"Brace configuration: 59°, 1", 3 ft 6 in, X Perpendicular, E
SB1Anvil Brace
Remarks:
Not approved
Approved as noted
Approved
Approval Stamp
Page 1 of 3
FIRE pIpIng hangERs & suppoRts
www.anvilintl.com 3
CEILING PLATE
Fig. 153Pipe Hanger Flange
Size Range: 3/8" thru 3/4"
CPVC PIPE HANGERS
Fig. 185One Hole Pipe Strap
Size Range: 3/4" thru 2"
Fig. 186Two Hole Pipe Strap
Size Range: 3/4" thru 2"
Fig. 187Two Hole 90˚ Side Mount Strap
Size Range: 3/4" thru 2"
Fig. 188Two Hole Stand Off StrapSize Range: 3/4" thru 2"
PIPE RINGS & CLEVIS
Fig. 138RExtension Split Pipe Clamp
Size Range: 3/8" thru 3"
Fig. 69Adjustable Swivel RingSize Range: 1/2" thru 8"
Fig. 260Adjustable Clevis HangerSize Range: 1/2" thru 30"
STEEL PIPE CLAmPS
Fig. 261Extension Pipe or Riser Clamp
Size Range: 3/4" thru 24"
Fig. 212Medium Pipe Clamp
Size Range: 1/2" thru 30"
Fig. 212FPEarthquake Bracing ClampSize Range: 21/2" thru 12"
HANGER RodS & ATTACHmENTS
Fig. 142Coach Screw Rods Machine Threaded on Opposite End
Size Range: 3/8" thru 1/2"
Fig. 146Continuous Thread
Size Range: 1/4" thru 11/2"
Fig. 136 & 136RStraight Rod Coupling
Size Range:1/4" thru 1"
Fig. 110RSocket, Rod Threaded
Size Range:1/4" thru 7/8"
Fig. 157Extension Piece
Size Range:3/8" thru 7/8"
Fig. 136:
Fig. 136R:
PH.FP-9.13
FIRE pIpIng hangERs & suppoRts
www.anvilintl.com4
BEAm CLAmPS
Fig. 86 & 88C-Clamp with Set Screw
and Lock NutSize Range: 3/8" thru 3/4"
Fig. 95C-Clamp with LocknutSize Range: 3/8" and 1/2"
Fig. 89XRetaining Clip
Size Range: 3/8" thru 3/4"
Fig. 92Universal C-Type Clamp
Standard ThroatSize Range: 3/8" and 1/2"
Fig. 93Universal C-Type Clamp
Wide ThroatSize Range: 3/8" and 1/2"
Fig. 94Wide Throat
Top Beam C-ClampSize Range: 5/8" and 3/4"
Fig. 227Top Beam Clamp
Fig. 133Standard Duty Beam Clamp
Size Range: 4" thru 12"
Fig. 134Heavy Duty Beam ClampSize Range: 4" thru 12"
Fig. 218Malleable Beam Clamp without Extension Piece
BRACkETS
Fig. 202Iron Side Beam BracketSize Range: 3/8" thru 5/8"
Fig. 206Steel Side Beam BracketSize Range: 3/8" thru 5/8"
Fig. 207Threaded Steel Side Beam Bracket
Size Range: 3/8" and 1/2"
Fig. 189Staight Eye Socket
Size: 3/8"
Fig. 190Off-Set Eye Socket
Size: 3/8"Fig. 194
Light Welded Steel Bracket
CoNCRETE INSERTS & ATTACHmENTS
Fig. 152Screw Concrete Insert
Size Range: 3/8" thru 7/8"
Fig. 282Universal Concrete InsertSize Range: 3/8" thru 7/8"
Fig. 281Wedge Type Conrete InsertSize Range: 1/4" thru 7/8"
Fig. 285Light Weight Concrete InsertSize Range: 1/4" thru 5/8"
PH.FP-9.13
FIRE pIpIng hangERs & suppoRts
www.anvilintl.com 5
sWaY BRaCE - sEIsMIC oshpD pRE-appRoVED
SwAy BRACEATTACHmENT
Fig. 771Sway Brace Swivel Attachment
Size Range: 1" and 11/4" Brace Pipe
RESTRAINTS
Fig. 773Surge Restrainer
Size Range: 3/4" thru 2" Swivel Ring Hanger
Fig. 777Swivel Joint Connector - Rod Tap
Size Range: 3/8" Rod Diameter
STRUCTURAL ATTACHmENTS
Fig. 778Bar Joist and Beam Attachment (WF)
Size Range: Flange Thickness 1/8" thru 3/4"
Fig. 772Adjustable Steel Beam Attachment
Size Range: Flange Widths 4" thru 15"
Fig. 779Multi-Connector Adapter
Size Range: 1" thru 8" Service Pipe
PIPE BRACE CLAmPS
Fig. 770Q Brace Clamp
Size Range: 1" thru 6" Service Pipe
Fig. 776Brace Clamp
Size Range: 21/2" thru 8" Service Pipe
Fig. 775Lateral/Longitudinal Brace Clamp
Size Range: 21/2" thru 8" Service Pipe
OPA-2804-10 OPA-2804-10 OPA-2804-10
OPA-2804-10 OPA-2804-10
OPA-2804-10
PH.FP-9.13
Notes: 1.Forfireprotectioninstallations-swaybracesareintendedtobeinstalledinaccordancewithNFPA-13andAnvil'sinstallations
instructionsandlocalcodes.
2.Therequiredtype,numberandsizeoffastenersusedforthestructuralattachmentfittingshallbeinaccordancewithNFPA-13.
3.Toassureproperperformance,installerisresponsibleforobtaininginstallationinstructionsfromAnvilInternational.
4.AnvilInternational®brandbracingcomponentsaredesignedtobecompatibleONLYwithotherAnvilInternational®brandbracingcomponents,resultinginaListedseismicbracingassembly.
Go to www.anvilintl.com/OPA for State of California Office of Statewide Health Planning and Development (OSHPD) design information relating to OSHPD projects.
Seis Brace™ can be accessed by visiting www.seisbrace.com
FIRE pIpIng hangERs & suppoRts
www.anvilintl.com6
ANVIL-STRUT CHANNEL
AS 200Channel
Size: 15/8" x 15/8" x 12 GA.
AS 200HChannel with Holes
Size: 15/8" x 15/8" x 12 GA.9/16" Holes on 17/8" Centers.
AS 200BTBWelded Channel
Size: 15/8" x 31/4" x 12 GA.Two Pcs. AS 200 Welded Back-to-Back.
AS 210Channel
Size: 15/8" x 15/8" x 14 GA.
AS 210HChannel with Holes
Size: 15/8" x 15/8" x 14 GA.9/16" Holes on 17/8" Centers.
AS 300Channel
Size: 15/8" x 13/8" x 12 GA.
AS 300HChannel with Holes
Size: 15/8" x 13/8" x 12 GA.9/16" Holes on 17/8" Centers.
CHANNEL NUTS
AS NSClamping Nut without SpringUse with all 15/8" wide channel
AS RSClamping Nut with Regular Spring
Use with AS 200, AS 210 and AS 300
AS TGTop Grip Nut with Spring on TopUse with all 15/8" wide channel
AS 517Stud Nut with RS Spring
PH.FP-9.13
U-BoLT & PIPE SUPPoRTS
Fig. 137 & 137SStandard U-Bolts
Size Range: 1/2" thru 36"
Fig. 264Adjustable Pipe Saddle Support
Size Range: 21/2" thru 36"
Fig. 259Pipe Saddle Support with U-Bolt
Size Range: 4" thru 36"
b r a n d s o f a n v i l i n t e r n at i o n a l
North Alabama PipeFounded in 1983, NAP is a manufacturer of fabrication equipment, including automatic welders, plasma cut-off equipment, hole cutting equipment, make-on machines and pipe threaders. NAP, innovators of pipe fabrication equipment.
Anvil® product lines include malleable and cast iron fittings, unions and flanges; seamless and welded steel pipe nipples; steel pipe couplings; universal anvilets; forged steel fittings and unions; pipe hangers and supports; threaded rod; and engineered hangers.
The Gruvlok® product line consists of couplings for grooved and plain-end fittings, butterfly valves and check valves; flanges; pump protection components; pipe grooving tools; as well as copper and stainless steel system components.
Anvil-Strut™ products include a complete line of channel in stock lengths of 10 and 20 feet, with custom lengths available upon request. A variety of fittings and accessories are also offered. All products can be ordered in an assortment of finishes and material choices including SupR-Green™, Zinc Trivalent Chromium, pre-galvanized, hot-dipped galvanized, electro-galvanized, aluminum, plain, and stainless steel.
JB Smith™ is the leading manufacturer of oil country tubular fittings, swages and bull plugs – all meeting API specifications. Offering tubing nipples, casing nipples as well as a full line of traditional line pipe and oil country threads in every schedule, JB Smith is the resource for all your oilfield needs.
Catawissa™ NACE and API approved wing unions for Standard Service are offered in non-pressure seal ends as well as threaded and butt weld, and are interchangeable with most leading union manufacturers. Fully traceable and available with complete mill certifications, Catawissa’s oilfield wing union product line includes the standard ball-and-cone design plus our unique Figure 300 Flat Face design, where space and pipe line separation are a consideration.
The SPF/Anvil™ product line includes a variety of internationally sourced products such as grooved couplings, fittings, cast iron, malleable iron and ductile iron threaded fittings, steel pipe nipples, as well as tee-lets.
The Merit® product line includes a variety of tee-lets and drop nipples for fire protection applications. Most Merit products are UL/ULC Listed, FM Approved, and rated from 175 to 300 psi.
Steel pipe nipples and steel pipe couplings are manufactured in accordance with the ASTM A733 Standard Specification for Welded and Seamless Carbon Steel and Stainless Steel Pipe Nipples. Steel pipe couplings are manufactured in accordance with the ASTM A865 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints. API couplings are manufactured in accordance with the API Specification for line pipe.
Canvil® manufactures low pressure hexagon reducer bushings, as well as plugs and hex caps up to 1” in diameter in various finishes including Oil Treat, Phosphate and Electro Galvanized. In addition, Canvil manufactures A105 hex or round material in class 3000 and 6000 pound, forged steel couplings and bar stock products offered as either as normalized (A105N) or non-normalized (A105) that are fully traceable for mechanicals and chemistry through our MTR program.
Anvil EPS-Engineered Pipe Supports are products used to support piping systems under thermal, seismic, and other dynamic loading conditions. The product line encompasses variable spring hangers, constant supports, sway struts and snubbers as well as standard and special design clamps. Anvil EPS brings the highest quality products and innovative engineering solutions to common and uncommon piping system problems.
fire Products - Pipe Hangers •ULandULCListed •FMApproved •SeismicSwayBrace •OSHPDManual •OPA-2804-10 •PipeBraceClamps •SeisBrace™SeismicFireProtectionDesignTool •StructuralAttachments •Restraints •SwayBraceAttachment
seis brace™Anvil'sSeismicFireProtectionDesignToolisprovidedtoourcustomersfreeofcharge. This seismic calculator tool for fire protection allows you to:
•SpecifyFMApprovalorULListedcomponents
•PerformcalculationthrougheithertheNFPA method ("Fpw") or the IBC code method ("Fp")
•Seeaselectionofproductgroupingsthat match your system design
•Generatesubmittalswithfigurenumbersfrom Anvil's seismic bracing product line including images and specifications for each product
•YoumaybegintouseSeis Brace by visiting www.seisbrace.com
Customer serviceWith four key stocking locations throughout North America, you can count on getting all of the product you need - when you need it. When you have installation questions our solid customer service personnel are there to answer all of your questions, backed by our designers or engineers we are there for you - on site if needed.
Manufacturing excellenceOurmanufacturingfacilityinHenderson,Tennesseehasover175,000squarefeet of manufacturing capability dedicated to producing a complete line of commercial,lightindustrialandindustrialPipeHangersandSupports.Theseinclude clamps, braces, inserts, rods and attachments, slides and guides to exacting industry standards and certified to ISO 9001 quality. The products manufacturedinHendersonaredesignedforuseinawidevarietyofrigidPipeHangerorSupportapplications,inmarketsincludingfireprotection,electrical,water and waste water treatment, petrochemical, seismic, industrial and commercial.SpecialfabricationisavailablefromourHendersonfacilityaswell.
PiPe Hangers, suPPorts and seisMiC braCing for fire ProteCtion
Brace SubmittalSeismic
PROJECT
Yes
2010 NFPA 13Calculation Standard:
UL Listed:
FM Approval: YesABC Warehouse
1st streetany city , CA 90058
12/11/2012
CONTRACTORENGINEERARCHITECT
FPCFPEArchitect
800-222-1234800-333-5678800-123-4567
Brace Details>Section 1
Brace Index
SWAY BRACECONNECTOR
PIPE BRACECLAMPS
SWAY BRACEATTACHMENT
STRUCTURALATTACHMENT
BRACE DESCRIPTIONDRAWING REF.BRACE NAME
Fig 770Fig 771Fig 778Braced pipe: 15', Schedule 40, 2"Brace configuration: 59°, 1", 3 ft 6 in, X Perpendicular, E
SB1Anvil Brace
Remarks:
Not approved
Approved as noted
Approved
Approval Stamp
Page 1 of 3
Corporate offiCes2 Holland WayExeter, NH 03833Tel: 603-418-2800Fax: 603-418-2833E-mail: [email protected]
U.S. Regional SeRvice centeRSnorthern RegionRegional Distribution & Customer Service Center7979 W. 183rd Street, Tinley Park, IL 60477Tel: 708-885-3000Fax: 708-534-5441Toll Free: 1-800-301-2701
Southern RegionRegional Distribution & Customer Service Center1401 Valley View Lane, Suite 150, Irving, TX 75061Tel: 972-871-1206Fax: 972-641-8946Toll Free: 1-800-451-4414
canada SeRvice centeRanvil international canadaCustomer Service Center390 Second Avenue, P.O. Box 40, Simcoe, Ontario N3Y 4K9Tel: 519-426-4551Fax: 519-426-5509
inteRnational SaleSeurope and Middle east RegionRick van [email protected]: +31-53-5725570Fax: +31-53-5725579
Mexico, Puerto Rico and latin america RegionInternational Customer ServiceTel: +1-708-885-3000Fax: +1-708-534-5441
B U I L D I N G C O N N E C T I O N S T H A T L A S T
North Alabama Pipe
www.anvilintl.com
SePteMBeR 2013For the most current product/pricing information on Anvil products, please visit our website at www.anvilintl.com
fire productsPipe Hangers • Supports • Seismic Bracing
#182/Printed in USA/© Copyright 2013Revision Date: 9.17.13
Fire Protection Installations• UL/ULC • OSHPD Pre-approved SupportsRefer to catalog for listings and approvals