PH 230-635 HE NorthAmerica Component...
Transcript of PH 230-635 HE NorthAmerica Component...
CONFIDENTIAL: This document is property of Pneumatech and shall not without our permission be altered, copied,
Document title:
Component ListDescription:
PH HE 230-635 North America
Revision:1
Created by:AIR13046
Document No.
9827885000-01
CONFIDENTIAL: This document is property of Pneumatech and shall not without our permission be altered, copied, used for manufacturing or communicated to any other person or company.
REVISION RECORDRev No. Reason for Revision Date
1 Initial version 2016/07/26
INDEX
Component list PH230-635 HE North America.........................................................................3
I 24
CONFIDENTIAL: This document is property of Pneumatech and shall not without our permission be altered, copied, used for manufacturing or communicated to any other person or company.
Component list PH230-635 HE North AmericaNote: the component symbols correspond with the numbers on the flow diagram.
Symbol Part name Specifications
IF1, IF2 Inlet filter 1 Type: FilterDuty: Removes oil aerosol, wet dust and water droplets with a total mass efficiency of 99.99 %, and has a downstream ISO 8573-1:2010 air purity of class 2 for total oil.Spec.: Maximum allowable pressure: 16 bar (232 psi)
Temperature range: 1 to 66°C ( 33 to 150°F) V1V2
Inlet valve vessel AInlet valve vessel B
Type: Butterfly valveSpec.: PN16
Temperature range: -10 to 100°C (14 to 212 °F)Seat: NBRValve body: ductile ironDisc: stainless steel
V3V4
Regeneration valve vessel ARegeneration valve vessel B
Type: Angle seat valveSpec.: Maximum allowable pressure: 16 bar (232 psi)
Temperature range: -10 to 184°C (14 to 363 °F)Seat: PTFEValve body: bronzeDisc: bronze
TT01 Temperature dryer inlet Spec.: Maximum allowable pressure: 50 bar (725 psi)Temperature range: -40 to 270°C (-40 to 518 °F)Degree of protection: IP54
PT01PT02
Pressure sensor vessel APressure sensor vessel B
Spec.: Pressure range: 0 to 17 bar (246 psi) barTemperature range: -40 to 135°C (-40 to 275 °F)Supply voltage: 5V
PI01PI02
Pressure Gauge vessel APressure Gauge vessel B
Spec.: Analog pressure gauge
V21V22
Safety valve vessel ASafety valve vessel B
Type: Safety valveSpec.: PN40
Temperature range: -20 to 200°C (-4 to 392°F)Seat: VitonValve body: brass
V11V12
Outlet valve vessel AOutlet valve vessel B
Type: Check valveSpec.: Maximum allowable pressure: 16 bar (232 psi)
Temperature range: -20 to 160°C ( -40 to 320 °F)Seat: FPMValve body: cast ironDisc: stainless steel, AISI316
OF1 Outlet filter 1 Type: FilterDuty: removes dust, particles and micro-organisms with a count
efficiency of 99.92% at MPPS and has a downstream ISO 8573-1:2010 air purity of class 2 for particles.
Spec.: Maximum allowable pressure: 16 bar (232 psi)Temperature range: 1 to 66°C (33 to 150 °F)
100 Manual valve Type: Ball valve107 3/2 spool valve mono stable Type: Spool valve
Spec.: Maximum allowable pressure: 10 bar (145 psi)Temperature range: -10 to 100°C (14 to 212°F)Seals: FKMValve body: brass
104 Pressure regulator Type: Single stageSpec.: Maximum allowable pressure: 16 bar (232 psi)
Temperature range: 0 to 50°C (32 to 122 °F)Outlet pressure range: 0,5 to 8 barBowl: polycarbonateDiaphragm: nitrile
Vessel AVessel B
Pressure vessel Type: Simple pressure vesselSpec.: Maximum allowable pressure: 16 bar (232 psi)
I 34
CONFIDENTIAL: This document is property of Pneumatech and shall not without our permission be altered, copied, used for manufacturing or communicated to any other person or company.
Operational design temperature: 0 to 80°C (32 to 176 °F)See specification: 9827722000Material: carbon steelCorrosion allowance: 0,5mm
114 Nozzle Type: OrificeDuty: To regulate the amount of flowSpec.: Material: stainless steel, AISI304
101 Pilot air filter Type: Particle filterDuty: To separate water and dust particles from the pilot airSpec.: Maximum allowable pressure: 16 bar (232 psi)
Temperature range: 0 to 50°C (32 to 122°F)Body: zincBowl: polycarbonateParticle size up to: 15µm
PDP SENSOR(optional)
Pressure dew point transmitter Spec.: Dew point range: -100 to -20°C (-148 to -4 °F)Operating temperature range: -40 to 60°C (-40 to 140°F)Degree of protection: IP54
SONIC NOZZLE(optional)
Sonic nozzle Duty: To limit the air speed through the dryerSpec.: aluminium, hard anodized
Mk5 reguator
Elektronikon Mk5 regulator Spec.: Operating temperature range: -10 to 60°C (14 to 140 °F)
I 44