PGS Introduction

10

description

"Value Series" : Best VALUE gaming cases with the highest C/P Ratio (Cost to Performance ratio). PGS Introduction. "Professional Series – Red label" : Super tower or Super mid-tower cases with elegant, clean line designs. "Aluminum – Silver label" : Unique “Full aluminum” cases - PowerPoint PPT Presentation

Transcript of PGS Introduction

Page 1: PGS Introduction
Page 2: PGS Introduction

PGS Introduction

"Value Series" : Best VALUE gaming cases with the highest C/P Ratio (Cost to Performance ratio).

"Professional Series – Red label" : Super tower or Super mid-tower cases with elegant, clean line designs.

"Aluminum – Silver label" : Unique “Full aluminum” cases targeting at power users, professionals and gamers.

"Ultimate Gaming Series – Black label" : Ultimate gaming cases targeting at the extreme gamers. This Series offers gamers with most functions, expandability and Extreme cooling.

"Compact – Blue Label" : Small form factor case series including cube cases, mini-ITX and Mini-Tower (Micro-ATX).

Yellow

Page 3: PGS Introduction

Design C

oncept

Vs-9Vs-9 is a Superb Gaming case which is affordable by everyone. This case is one

of the BEST VALUE case in the market today if not the BEST VALUE case.

The Chassis is solidly constructed with 0.6mm Japanese steel. It is also

beautifully finished with "All Black" interior and it includes many advanced

features even for the most demanding gamers and enthusiasts. It has great

expandability and versatility. The chassis supports 9 x 5 1/4" devices or 4 x 5 1/4"

devices and 5 x 3.5" HDDs with the use of HDD adaptors. A SSD Drive can be

installed on the bottom of the chassis.  Vs-9 also supports long high end VGA

cards up to 295mm.

Vs-9 also provides un-rival air flow and cooling. Users can install up to max 7

fans - 3 x 12cm intake front fans (optional) with the use of fan brackets, 2 x 12cm

or 14cm side panel fans (optional), 1 x 12cm Back Exhaust fan (included) and 1 x

12cm or 14cm intake bottom fan (optional). Vent holes are pre-drilled on the top

chassis panel for the hot air to exist easily.Each HDD can be individually cooled

by mounting a 12cm fan on the HDD convertor bracket. Bottom PSU position will

suck in cold air and help cool your system.

Ease of installation is also one of Vs-9's advance features. The chassis is

completely screw-less and cable management clips are pre-mounted on the MB

plate to reduce the cable mess inside your chassis. A CPU hole is pre-drilled on

the MB plate for easy mounting or assembly of your CPU cooler.

The side panel design is compatible with Intel's TAC 2.0 standards. The unique

vent hole design and position allow users to mount 1 x 12cm or 14cm fan in any

position or it can support maximum 2 x 12cm or 14cm fans on the side panel.

Water-cooling holes are pre-drilled to support water cooling systems.

The Vs-9 is the best Gaming case your money can buy !!

Page 4: PGS Introduction

Gallery

Front Back Top

Side

Page 5: PGS Introduction

Features- High performance "Mid-Tower" for gamers and enthusiast. - Solidly constructed "ALL BLACK" chassis – 0.6mm SECC Japanese

Steel and beautifully finished ALL BLACK interior.

- High-end Graphic card Support – Supports longer high-end VGA cards up to 295

mm. - High Expandability – Supports 9 x 5 1/4" bays and maximum 5 x 3.5" HDDs

(internal) with HDD convertor brackets.

- Superb HDD Cooling capability – Each HDD bracket has pre-drilled fan holes to

mount a 12cm fan to cool each HDD individually.

- Ease of Installation – New "Easy-install" screw-less kits are included for the 5

1/4" devices and PCI slot.

- Easy Access Front I/O ports – 2 x USBs and Audio/Mic ports are easily

accessible from the front panel.

- Smart Cable Management – Cable routing clips are pre-mounted on the MB so

users can arrange the cables inside the chassis neatly

- CPU holes is pre-drilled on the MB plate for ease of CPU cooler assembly

Superb Cooling – Users can install up to 7 fans - 3 x 12cm front intake fans

(optional), 2 x 12cm/14cm intake side panel fans (optional), 1 x 12cm back exhaust

fan (included) and 1 x 12cm intake bottom fan (optional).

- Un-rival Airflow – The front "Mesh" front bay cover design allows max intake of

cold air. The top chassis vent holes enable the hot air inside the chassis to exist

easily. Users also have the option to install up to 2 x 12cm/14cm on the top panel if

there is sufficient space inside the chassis.  

- TAC 2.0 compatible Side Panel - Bottom PSU position – the bottom PSU location enables PSUs to suck in cold air and provides better air flow for your system.

- Water-cooling Support – water-cooling holes are pre-drilled to support water-

cooling systems!!

- Supports 1 x SSD Drive

Page 6: PGS Introduction

Specifications

Spec

Cooling System

Case Type

Material

Motherboards

Chassis Dimensions

Drive Bays

Expansion Slots

Max length space available for PCI slots

I / O Ports

Fan Rated voltage Voltage range Starting voltage Power consumption Rated currentSpeedAir Flow (CFM)Air pressureNoise (dBA)Bearing

:

:

:

:

:

:

:

:

:::::::::::

Middle Tower

SECC 0.6mm

ATX & Micro ATX

430(H) x 190(W) x 493(D)

9 x 5.25" (External)/1 x 3.5" (w/Adapters)/5 x 3.5” HDD (Hidden) /

1 x 2.5" HDD(Hidden)

7 Slots

295 mm

2 x USB2.0 / Mic & headphone (AC97 & HD audio)

120 x 120 x 25mm12V DC6V~13.8V 9V 2.4W 0.20A 1500 RPM +- 10% 58.35 CFM (Max) 2.1mm H2O 26.67 dBA Sleeve

Back12cm Fan

Page 7: PGS Introduction

Air Flow

Superb airflow - install up to 7 fans !!

1. Front - 3 x 12cm fan (optional)-(w/Fan adaptor)2. Back - 1 x 12cm fan (included)3. Side - 2 x 14 or 12cm fan (optional)4. Bottom - 1 x 14 or 12cm fan (optional)

Page 8: PGS Introduction

Inside

Pre-drilled holes for water cooling tubes

Sufficient depth of chassis for installing long cards

Fan can be installedin any position on top panel

Can install 1x12 or 14cm fan at bottom atany position preferred

Can install up to 2x12 or 2x14cm fanson side panel

Fan can be mountedto the HDD adaptorto cool HDD

FDD can be mounted with adaptor

Large area of vent holes for great air flow

Large area of vent holes for great air flow

HDD can be mounted with adaptor

Tool-free for 5.25” bayCable clip to reduce mess inside the chassis

Can mount 1x12cm fan with fan adaptor

Page 9: PGS Introduction

Close U

p

Can Installed 2 x 12 or 14cm Fan

Power & HDD LED, 2 x USB, Audio/Mic 9 x 5.25" (External)

Page 10: PGS Introduction