Pew Selection Guide - Sauder Worship Seating• Prevents squeaks common with traditional serpentine...
Transcript of Pew Selection Guide - Sauder Worship Seating• Prevents squeaks common with traditional serpentine...
The confidence that comes from working with the leader.
Pew Selection GuideSpecifying Custom Pews for Your Worship Environment
Architectural Styles . . . . . . . . . . . . . . . 4-5
Pew Body 101 . . . . . . . . . . . . . . . . . . . . 6-7
Choose A Pew Body . . . . . . . . . . . . . . . 7-9
Pew End 101 . . . . . . . . . . . . . . . . . . . 10-11
Choose A Pew End . . . . . . . . . . . . . . 12-13
Supports & Pew Caps . . . . . . . . . . . . . . 14
Options & Accessories . . . . . . . . . . . . . . 15
Fabrics, Finishes & Species . . . . . . . . . . 16
Platform Furniture . . . . . . . . . . . . . . . . . 17
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . 18
Next Steps & Target Dates . . . . . . . . . . 19
Visit sauderworship.com for additional supporting resources, or request samples from your
local Sauder Worship Representative
Initial Customer Questions
1. What is the desired seating capacity?
2. Is this new construction or renovation?
3. What flooring materials are, or will be used? (e.g. cement, wood, tile, carpet)
4. What is the style of the floor? (e.g. bowl, sloped, flat, multi-level)
5. Do you have a building drawing available?
6. What are your ADA requirements?
2
Table of Contents
sauderwor ship.com
In 1934, a congregation from Defiance, Ohio met with Erie Sauder, a local woodworker, to discuss wood furnishings for their newly renovated worship environment . Erie guided them through the process of selecting the furniture that best suited their needs, and then he produced the furniture to their specifications.
Erie Sauder found his passion helping this congregation with their furniture . He was inspired . He gathered a few friends and relatives together to found the company, that today, is Sauder Worship Seating .
Erie’s standards on quality, craftsmanship, innovation, and customer satisfaction still guide us each and every
day . To date, we have provided furniture for over 35,000 congregations around the world .
We hope you find this guide, our materials, website, representatives, and employees a valuable resource when selecting the furnishings for your project .
For that consideration, we sincerely thank you, and will work hard to provide the service our customers have come to expect from the leader in worship furniture .
Initial Customer Questions
3
Table of Contents
Building on a Long Legacy
Over 70 years later, the same custom pews, millwork, and platform furniture pictured still serve the congregation in Defiance, Ohio.
4
Contemporary
Gothic
Choose Your Architectural Style
5sauderwor ship.com
Traditional
Colonial
Choose Your Architectural Style
Arch
itect
ural
Style
6
Pew Body 101
At Sauder Worship Seating® every seat has a contour . The contour provides maximum seating comfort, and strength over the life of the pew . In addition to the contoured seat, we also offer a flat or contoured back. These pew options offer the support and have an appealing appearance .
All our seating products are designed for use in worship settings . Sauder Worship Seating® applies the same design and engineering principles to our seating that is used by office and task chair designers and engineers . Our pews and benches have been created to provide comfort through the combination of a contoured seat and back that utilizes the appropriate foam .
Seat Contour Solid Wood Pew Body
Veneered Pew Body
Ergonomic Design
SOLID BACK CAP
PITCH
SOLID WOOD PLANKS
CONTOUREDSEAT
FLAT ORCONTOURED
BACK
SOLIDSEAT NOSING
SUPPORT
CAPS
WIDTH
APPLIED orROUTED SYMBOL
SEAT BRACKET
BASE SHOE
PEW ENDTHICKNESS
BACKBOOKRACK
CA
P H
EIG
HT
BASE SHOE
UNDER SEAT
SUPPORT
SEAT
HEI
GH
T
SOLIDUNDERCAPMOLDING
SOLID BACK CAP
FLAT OR CONTOUREDWOOD VENEER BACK
CONCEALED FLOOR ANCHOR
BACK of BACK
FRONT of BACKUPHOLSTERED
SEAT FOAM
PITCH
EDGE MOLD
VENEER or FABRIC
BOOKRACK
CONTOUREDWOOD VENEER SEAT
SEAT DEPTH
PITCH
BACK FOAM
UPHOLSTERYFABRIC
"PEW 101" NOMENCLATURE OF CHOICES
SOLID BACK CAP
DIMENSIONCANTILEVER
ENVELOPE
CORECORE
REARVIEW
SOLIDSEAT NOSING
SUPPORT
Upholstered Seat Construction
Upholstered Pew Body3 1/4" Thick, 1.8 lb Density,
45 lb Indentation Force Deflection FoamHigh Tensile Strength Face Cover
1/8"Thick, 62 lb Hardboard Layer
5/8" Thick Plywood Core*
Solid Wood Screw Rail
1/8" Thick, 62 lb Hardboard Layer High Tensile Strength Face Cover
CAPS
WIDTH
APPLIED orROUTED SYMBOL
SEAT BRACKET
BASE SHOE
PEW ENDTHICKNESS
BACKBOOKRACK
CA
P H
EIG
HT
BASE SHOE
UNDER SEAT
SUPPORT
SEAT
HEI
GH
T
SOLIDUNDERCAPMOLDING
SOLID BACK CAP
FLAT OR CONTOUREDWOOD VENEER BACK
CONCEALED FLOOR ANCHOR
BACK of BACK
FRONT of BACKUPHOLSTERED
SEAT FOAM
PITCH
EDGE MOLD
VENEER or FABRIC
BOOKRACK
CONTOUREDWOOD VENEER SEAT
SEAT DEPTH
PITCH
BACK FOAM
UPHOLSTERYFABRIC
"PEW 101" NOMENCLATURE OF CHOICES
SOLID BACK CAP
DIMENSIONCANTILEVER
ENVELOPE
CORECORE
REARVIEW
SOLIDSEAT NOSING
SUPPORT
7sauderwor ship.com
Frequently Used Pew Dimensions
Cushion Options
Back Height: 32" Standard; select styles 38" or 42" heights
Pitch: Wood Backs: 5" Standard; select styles in 3"Upholstered Backs: 6" Standard; select styles in 3"
Radius: Curved Pews Only: 20' Minimum; 1/4" increments
Pew Envelope: 24"
Seat Height: 17 .5"
Seat Depth: Standard: 16" Optional: 14", 15", or 18"
Substrate Thickness: Upholstered Backs: 5/8"Wood Backs: 3/4" Seats: 7/8"
Comfort plays a critical role when making a decision related to seating. Sauder Worship Seating offers several comfortable foam options which are also durable providing lasting quality .
Choose from conventional or high resiliency (HR) foam. The Indentation Force Deflection (IFD) indicates the load bearing capacity of the foam . The larger the number, the more force it takes to compress the foam . Too little density allows someone to bottom out, while too much can make for a stiff seating experience. HR is a change to the initial manufacturing process to add support, comfort and resilience or bounce to the foam . HR foam by nature is a denser product, but has a lower IFD . This combination allows for some additional "give" resulting in a bit softer feel than conventional foam while preventing "bottoming out" .
Sauder Worship Seating also offers these premium cushion options:
Exclusive Spring Seat:
• Uses a Spring Cartridge System• Prevents squeaks common with traditional serpentine springs• Provides maximum comfort over the life of the pew
Patented Definity Seating:
• Uses individual seat cushions• Looks like traditional pew while maximizing seating capacity• Allows for easy event planning and ticket sales• Available with or without wood dividers
1006Contoured
1106Flat
4016 Shaped
4116Flat
1406Flat, Open
5416Flat, Open
8216Flat 38" High
8316Flat 42" High
Wood Veneer* Back, Contoured Veneer* Seat
All Wood Construction
8
Choose A Pew Body
Definity® Seating: All Upholstered Construction pew bodies available with Definity cushion (XX36: No dividers, XX46: Dividers) * Plywood core is standard on all pews.
1026 Contoured
1126 Flat
1426 Flat, Open
4026 Shaped
4126 Flat
5426 Flat, Open
8226 Flat 38" High
8326 Flat 42" High
Solid Wood Back, Contoured Upholstered Seat
Wood Veneer Back, Contoured Upholstered Seat
Solid Wood Seat,Wood Veneer Back
Upholstered Seat,Wood Veneer* Back
Upholstered Seat,Upholstered Back
4192Radius/curved
4198Radius/curved
6298Flat
6798Radius/curved
7498Double wedge
Radius Construction
Upholstered Construction: Seat
9sauderwor ship.com
Choose A Pew Body
Definity® Seating: All Upholstered Construction pew bodies available with Definity cushion (XX36: No dividers, XX46: Dividers) * Plywood core is standard on all pews.
6726 (v)6426 (u)
Wedge Cushion
7226 (v)7326 (u)
2-Piece
5526 (v)Flat
8426 (v)8626 (u)
1¼" Cushion Flat 38" High
8526 (v)8726 (u)
1¼" Cushion Flat 42" High
7426 (v)7526 (u)
Ergo Cushion
Upholstered Back, Upholstered Seat, Uph . or Wood Veneer* Back of Back
6236 (v) 6336 (u) 6246 (v) 6346 (u)6736 (v) 6436 (u) 6746 (v) 6446 (u)
Wedge Cushion
7236 (v) 7336 (u) 7246 (v) 7346 (u)
2-Piece
5546 (v) 5536 (u) 5436 (v) 5446 (u)
Flat
8436 (v) 8636 (u) 8446 (v) 8646 (u)
1¼" Cushion Flat 38" High
8536 (v) 8736 (u) 8546 (v) 8746 (u)
1¼" Cushion Flat 42" High
7436 (v) 7536 (u) 7446 (v) 7546 (u)
Ergo Cushion
Solid and Veneer Wood Back
Upholstered Seat Widths 19", 20", 21", 22"
Wood or Upholstered Back, Upholstered or Wood Back of Back
Veneer Backindicated with (v)
1036 40361046 4046
Shaped
1136 41361146 4146
Flat
1436 54361446 5446
Flat, Open
8236 (v) 8246 (u)
Flat, 38" High
8336 (v) 8346 (u)
Flat, 42" High
UpholsteredBackindicatedwith (u)
Pew
Bod
y
Upholstered Construction: Seat and Back
Definity®
6226 (v)6326 (u)
1¼" Cushion
10
5 PLY 2 PLY MDF
Pew Ends 101
CAPS
WIDTH
APPLIED orROUTED SYMBOL
SEAT BRACKET
BASE SHOE
PEW ENDTHICKNESS
BACKBOOKRACK
CA
P H
EIG
HT
BASE SHOE
UNDER SEAT
SUPPORT
SEAT
HEI
GH
T
SOLIDUNDERCAPMOLDING
SOLID BACK CAP
FLAT OR CONTOUREDWOOD VENEER BACK
CONCEALED FLOOR ANCHOR
BACK of BACK
FRONT of BACKUPHOLSTERED
SEAT FOAM
PITCH
EDGE MOLD
VENEER or FABRIC
BOOKRACK
CONTOUREDWOOD VENEER SEAT
SEAT DEPTH
PITCH
BACK FOAM
UPHOLSTERYFABRIC
"PEW 101" NOMENCLATURE OF CHOICES
SOLID BACK CAP
DIMENSIONCANTILEVER
ENVELOPE
CORECORE
REARVIEW
SOLIDSEAT NOSING
SUPPORT
CAPS
WIDTH
APPLIED orROUTED SYMBOL
SEAT BRACKET
BASE SHOE
PEW ENDTHICKNESS
BACKBOOKRACK
CA
P H
EIG
HT
BASE SHOE
UNDER SEAT
SUPPORT
SEAT
HEI
GH
T
SOLIDUNDERCAPMOLDING
SOLID BACK CAP
FLAT OR CONTOUREDWOOD VENEER BACK
CONCEALED FLOOR ANCHOR
BACK of BACK
FRONT of BACKUPHOLSTERED
SEAT FOAM
PITCH
EDGE MOLD
VENEER or FABRIC
BOOKRACK
CONTOUREDWOOD VENEER SEAT
SEAT DEPTH
PITCH
BACK FOAM
UPHOLSTERYFABRIC
"PEW 101" NOMENCLATURE OF CHOICES
SOLID BACK CAP
DIMENSIONCANTILEVER
ENVELOPE
CORECORE
REARVIEW
SOLIDSEAT NOSING
SUPPORT
CAPS
WIDTH
APPLIED orROUTED SYMBOL
SEAT BRACKET
BASE SHOE
PEW ENDTHICKNESS
BACKBOOKRACK
CA
P H
EIG
HT
BASE SHOE
UNDER SEAT
SUPPORT
SEAT
HEI
GH
T
SOLIDUNDERCAPMOLDING
SOLID BACK CAP
FLAT OR CONTOUREDWOOD VENEER BACK
CONCEALED FLOOR ANCHOR
BACK of BACK
FRONT of BACKUPHOLSTERED
SEAT FOAM
PITCH
EDGE MOLD
VENEER or FABRIC
BOOKRACK
CONTOUREDWOOD VENEER SEAT
SEAT DEPTH
PITCH
BACK FOAM
UPHOLSTERYFABRIC
"PEW 101" NOMENCLATURE OF CHOICES
SOLID BACK CAP
DIMENSIONCANTILEVER
ENVELOPE
CORECORE
REARVIEW
SOLIDSEAT NOSING
SUPPORT
Full End Cantilevered EndBA
Pew End Construction
5-Ply Solid HardwoodFlitch Glued
2-Ply Solid Hardwood MDF (Medium Density Fiberboard, for painted ends only)
5 PLY 2 PLY MDF5 PLY 2 PLY MDF
MANUFACTURING COMPANY
R
1/27/11
EndConstruction
MANUFACTURING COMPANY
R
1/27/11
EndConstruction
MANUFACTURING COMPANY
R
1/27/11
EndConstruction
Exploded Top View
Hardwood Veneer Face
Cross Banding
Solid Hardwood Core
Solid Hardwood Planks
Butcher Block Planks
Staggered Planks Solid MDF Panel
(without cap)
Top View Top View
Pew End Selection is:
Common Pew End Terms
11sauderwor ship.com
Pew Ends 101Check Box to Make Your
Edge Mold Selection
Pew End Edge Mold Selections
DMANUFACTURING COMPANY
USAR
RE
StdEdgeMold.dwg
12/3/01
StdEdgeMold.dwg
12/3/01
RUMANUFACTURING COMPANYAS ED
R
EM-1 EM3 EM-4
EM-6 EM-7 EM-8
EM-9 EM-10 EM-20
DMANUFACTURING COMPANY
USAR
RE
StdEdgeMold.dwg
12/3/01
StdEdgeMold.dwg
12/3/01
RUMANUFACTURING COMPANYAS ED
R
DMANUFACTURING COMPANY
USAR
RE
StdEdgeMold.dwg
12/3/01
StdEdgeMold.dwg
12/3/01
RUMANUFACTURING COMPANYAS ED
R
DMANUFACTURING COMPANY
USAR
RE
StdEdgeMold.dwg
12/3/01
StdEdgeMold.dwg
12/3/01
RUMANUFACTURING COMPANYAS ED
R
DMANUFACTURING COMPANY
USAR
RE
StdEdgeMold.dwg
12/3/01
StdEdgeMold.dwg
12/3/01
RUMANUFACTURING COMPANYAS ED
R
DMANUFACTURING COMPANY
USAR
RE
StdEdgeMold.dwg
12/3/01
StdEdgeMold.dwg
12/3/01
RUMANUFACTURING COMPANYAS ED
R
DMANUFACTURING COMPANY
USAR
RE
StdEdgeMold.dwg
12/3/01
StdEdgeMold.dwg
12/3/01
RUMANUFACTURING COMPANYAS ED
R
DMANUFACTURING COMPANY
USAR
RE
StdEdgeMold.dwg
12/3/01
StdEdgeMold.dwg
12/3/01
RUMANUFACTURING COMPANYAS ED
R
DMANUFACTURING COMPANY
USAR
RE
StdEdgeMold.dwg
12/3/01
StdEdgeMold.dwg
12/3/01
RUMANUFACTURING COMPANYAS ED
R
Symbols Select Your Base Shoe
Colonial Pew End Caps
Laser Etched AppliedRouted
Personalized Pew EndsCreate something special with the Personalized Pew End Kit . It includes the tools to help you express your creativity . We’ll provide the perfect execution of your design!
Projected (PB)
CapStyle #18
Cap Style #23
Recessed (RB)
Width: 2-3/8"Height: 2-3/4"
Pew end base shoes are constructed of solid wood and used on full pew ends only.
Width: 1-3/4"Height: 2-3/4"
Updated 6/6/02
SMC\Custom Pew Binder\supports
H:\HFA\WORD\CUSTOM PEW BINDER\Sup Const-Style Base Shoe
To Update back of This Page See---
CAD\Custom Pew Binder\support combination detailsUpdated 1/16/02
Updated 8/23/00
Updated 5/18/0010/19/94
NOTE: 2ND DIGIT OF 2-DIGITSTANDARD SUPPORT NUMBER
FLUSH BASE(SUPPORTS ONLY)(FULL ENDS ONLY)
RECESSED BASE(FULL ENDS ONLY)
PROJECTED BASEPB RB FB
(SUPPORTS ONLY)FLUSH BASE
SOLID EDGE BANDRADIUS EDGE
VENEER FACE,
STANDARD SUPPORT NUMBER
0
PROJECTED BASE(FULL ENDS ONLY)
PB
NOVA-PLY,VENEER FACE,VENEER EDGEBAND
1BEVELED EDGE
VENEER FACE,SOLID EDGE BAND
NOVA-PLY,
(FULL ENDS ONLY)RECESSED BASE
RB FB
BUTCHER BLOCK
STANDARD SUPPORT NUMBERNOTE: 2ND DIGIT OF 2-DIGIT
3RADIUS EDGE
SOLID,4
NOVA-PLY,
STANDARD STYLE
TAPERED
1
10
141311
2
NOTE: 1ST DIGIT OF 2-DIGIT
7
6
TALLER10"
TALLER6"
FOR ADD-ON HIGH BACKS)(#21, #25 SUPPORT REQUIRED
SPECIFIED (REQUIRED
ADD-ON HIGH BACKS)
71612061636424
2321
747371
FOR KNEELERS OR
VERTICAL
OPTIONAL STYLE, IF
Comparable high back
HIGH BACK STYLE
TAPERED
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0" SUPPORT CONSTRUCTIONS...
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0"
STANDARD SUPPORTS
1" = 1'-0"
SUPPORT STYLES...
1 7/16"1 7/16" 1 7/16" 1 7/16"
MANUFACTURING COMPANY MANUFACTURING COMPANY
R
MANUFACTURING COMPANY
R
Updated 6/6/02
SMC\Custom Pew Binder\supports
H:\HFA\WORD\CUSTOM PEW BINDER\Sup Const-Style Base Shoe
To Update back of This Page See---
CAD\Custom Pew Binder\support combination detailsUpdated 1/16/02
Updated 8/23/00
Updated 5/18/0010/19/94
NOTE: 2ND DIGIT OF 2-DIGITSTANDARD SUPPORT NUMBER
FLUSH BASE(SUPPORTS ONLY)(FULL ENDS ONLY)
RECESSED BASE(FULL ENDS ONLY)
PROJECTED BASEPB RB FB
(SUPPORTS ONLY)FLUSH BASE
SOLID EDGE BANDRADIUS EDGE
VENEER FACE,
STANDARD SUPPORT NUMBER
0
PROJECTED BASE(FULL ENDS ONLY)
PB
NOVA-PLY,VENEER FACE,VENEER EDGEBAND
1BEVELED EDGE
VENEER FACE,SOLID EDGE BAND
NOVA-PLY,
(FULL ENDS ONLY)RECESSED BASE
RB FB
BUTCHER BLOCK
STANDARD SUPPORT NUMBERNOTE: 2ND DIGIT OF 2-DIGIT
3RADIUS EDGE
SOLID,4
NOVA-PLY,
STANDARD STYLE
TAPERED
1
10
141311
2
NOTE: 1ST DIGIT OF 2-DIGIT
7
6
TALLER10"
TALLER6"
FOR ADD-ON HIGH BACKS)(#21, #25 SUPPORT REQUIRED
SPECIFIED (REQUIRED
ADD-ON HIGH BACKS)
71612061636424
2321
747371
FOR KNEELERS OR
VERTICAL
OPTIONAL STYLE, IF
Comparable high back
HIGH BACK STYLE
TAPERED
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0" SUPPORT CONSTRUCTIONS...
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0"
STANDARD SUPPORTS
1" = 1'-0"
SUPPORT STYLES...
1 7/16"1 7/16" 1 7/16" 1 7/16"
MANUFACTURING COMPANY MANUFACTURING COMPANY
R
MANUFACTURING COMPANY
R
12
Choose A Pew End
Contemporary
Gothic
302-2315 302-2130
302-2200302-2288302-2511
302-2582302-2587
302-2592
302-2597
302-2598
302-4160 302-4360302-4309302-4251 302-4252
302-4709 302-4760 302-4984302-4909302-4785302-4509
302-4109
13sauderwor ship.com
Choose A Pew End
Pew
End
Circle Your Pew EndSelection
Traditional
Colonial
302-1301 302-1305 302-1308 302-1323 302-1346
302-1356 302-1361 302-1365 302-1370 302-1371 302-4120
302-3100 302-3101 302-3102 302-3103 302-3104
302-1306
302-4400
302-1761302-1725 302-1739 302-1755 302-1765302-1705
All colonial ends are also available in 8 solid wood species.
14
Updated 6/6/02
SMC\Custom Pew Binder\supports
H:\HFA\WORD\CUSTOM PEW BINDER\Sup Const-Style Base Shoe
To Update back of This Page See---
CAD\Custom Pew Binder\support combination detailsUpdated 1/16/02
Updated 8/23/00
Updated 5/18/0010/19/94
NOTE: 2ND DIGIT OF 2-DIGITSTANDARD SUPPORT NUMBER
FLUSH BASE(SUPPORTS ONLY)(FULL ENDS ONLY)
RECESSED BASE(FULL ENDS ONLY)
PROJECTED BASEPB RB FB
(SUPPORTS ONLY)FLUSH BASE
SOLID EDGE BANDRADIUS EDGE
VENEER FACE,
STANDARD SUPPORT NUMBER
0
PROJECTED BASE(FULL ENDS ONLY)
PB
NOVA-PLY,VENEER FACE,VENEER EDGEBAND
1BEVELED EDGE
VENEER FACE,SOLID EDGE BAND
NOVA-PLY,
(FULL ENDS ONLY)RECESSED BASE
RB FB
BUTCHER BLOCK
STANDARD SUPPORT NUMBERNOTE: 2ND DIGIT OF 2-DIGIT
3RADIUS EDGE
SOLID,4
NOVA-PLY,
STANDARD STYLE
TAPERED
1
10
141311
2
NOTE: 1ST DIGIT OF 2-DIGIT
7
6
TALLER10"
TALLER6"
FOR ADD-ON HIGH BACKS)(#21, #25 SUPPORT REQUIRED
SPECIFIED (REQUIRED
ADD-ON HIGH BACKS)
71612061636424
2321
747371
FOR KNEELERS OR
VERTICAL
OPTIONAL STYLE, IF
Comparable high back
HIGH BACK STYLE
TAPERED
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0" SUPPORT CONSTRUCTIONS...
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0"
STANDARD SUPPORTS
1" = 1'-0"
SUPPORT STYLES...
1 7/16"1 7/16" 1 7/16" 1 7/16"
MANUFACTURING COMPANY MANUFACTURING COMPANY
R
MANUFACTURING COMPANY
R
Updated 6/6/02
SMC\Custom Pew Binder\supports
H:\HFA\WORD\CUSTOM PEW BINDER\Sup Const-Style Base Shoe
To Update back of This Page See---
CAD\Custom Pew Binder\support combination detailsUpdated 1/16/02
Updated 8/23/00
Updated 5/18/0010/19/94
NOTE: 2ND DIGIT OF 2-DIGITSTANDARD SUPPORT NUMBER
FLUSH BASE(SUPPORTS ONLY)(FULL ENDS ONLY)
RECESSED BASE(FULL ENDS ONLY)
PROJECTED BASEPB RB FB
(SUPPORTS ONLY)FLUSH BASE
SOLID EDGE BANDRADIUS EDGE
VENEER FACE,
STANDARD SUPPORT NUMBER
0
PROJECTED BASE(FULL ENDS ONLY)
PB
NOVA-PLY,VENEER FACE,VENEER EDGEBAND
1BEVELED EDGE
VENEER FACE,SOLID EDGE BAND
NOVA-PLY,
(FULL ENDS ONLY)RECESSED BASE
RB FB
BUTCHER BLOCK
STANDARD SUPPORT NUMBERNOTE: 2ND DIGIT OF 2-DIGIT
3RADIUS EDGE
SOLID,4
NOVA-PLY,
STANDARD STYLE
TAPERED
1
10
141311
2
NOTE: 1ST DIGIT OF 2-DIGIT
7
6
TALLER10"
TALLER6"
FOR ADD-ON HIGH BACKS)(#21, #25 SUPPORT REQUIRED
SPECIFIED (REQUIRED
ADD-ON HIGH BACKS)
71612061636424
2321
747371
FOR KNEELERS OR
VERTICAL
OPTIONAL STYLE, IF
Comparable high back
HIGH BACK STYLE
TAPERED
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0" SUPPORT CONSTRUCTIONS...
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0"
STANDARD SUPPORTS
1" = 1'-0"
SUPPORT STYLES...
1 7/16"1 7/16" 1 7/16" 1 7/16"
MANUFACTURING COMPANY MANUFACTURING COMPANY
R
MANUFACTURING COMPANY
R
Updated 6/6/02
SMC\Custom Pew Binder\supports
H:\HFA\WORD\CUSTOM PEW BINDER\Sup Const-Style Base Shoe
To Update back of This Page See---
CAD\Custom Pew Binder\support combination detailsUpdated 1/16/02
Updated 8/23/00
Updated 5/18/0010/19/94
NOTE: 2ND DIGIT OF 2-DIGITSTANDARD SUPPORT NUMBER
FLUSH BASE(SUPPORTS ONLY)(FULL ENDS ONLY)
RECESSED BASE(FULL ENDS ONLY)
PROJECTED BASEPB RB FB
(SUPPORTS ONLY)FLUSH BASE
SOLID EDGE BANDRADIUS EDGE
VENEER FACE,
STANDARD SUPPORT NUMBER
0
PROJECTED BASE(FULL ENDS ONLY)
PB
NOVA-PLY,VENEER FACE,VENEER EDGEBAND
1BEVELED EDGE
VENEER FACE,SOLID EDGE BAND
NOVA-PLY,
(FULL ENDS ONLY)RECESSED BASE
RB FB
BUTCHER BLOCK
STANDARD SUPPORT NUMBERNOTE: 2ND DIGIT OF 2-DIGIT
3RADIUS EDGE
SOLID,4
NOVA-PLY,
STANDARD STYLE
TAPERED
1
10
141311
2
NOTE: 1ST DIGIT OF 2-DIGIT
7
6
TALLER10"
TALLER6"
FOR ADD-ON HIGH BACKS)(#21, #25 SUPPORT REQUIRED
SPECIFIED (REQUIRED
ADD-ON HIGH BACKS)
71612061636424
2321
747371
FOR KNEELERS OR
VERTICAL
OPTIONAL STYLE, IF
Comparable high back
HIGH BACK STYLE
TAPERED
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0" SUPPORT CONSTRUCTIONS...
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0"
STANDARD SUPPORTS
1" = 1'-0"
SUPPORT STYLES...
1 7/16"1 7/16" 1 7/16" 1 7/16"
MANUFACTURING COMPANY MANUFACTURING COMPANY
R
MANUFACTURING COMPANY
R
Updated 6/6/02
SMC\Custom Pew Binder\supports
H:\HFA\WORD\CUSTOM PEW BINDER\Sup Const-Style Base Shoe
To Update back of This Page See---
CAD\Custom Pew Binder\support combination detailsUpdated 1/16/02
Updated 8/23/00
Updated 5/18/0010/19/94
NOTE: 2ND DIGIT OF 2-DIGITSTANDARD SUPPORT NUMBER
FLUSH BASE(SUPPORTS ONLY)(FULL ENDS ONLY)
RECESSED BASE(FULL ENDS ONLY)
PROJECTED BASEPB RB FB
(SUPPORTS ONLY)FLUSH BASE
SOLID EDGE BANDRADIUS EDGE
VENEER FACE,
STANDARD SUPPORT NUMBER
0
PROJECTED BASE(FULL ENDS ONLY)
PB
NOVA-PLY,VENEER FACE,VENEER EDGEBAND
1BEVELED EDGE
VENEER FACE,SOLID EDGE BAND
NOVA-PLY,
(FULL ENDS ONLY)RECESSED BASE
RB FB
BUTCHER BLOCK
STANDARD SUPPORT NUMBERNOTE: 2ND DIGIT OF 2-DIGIT
3RADIUS EDGE
SOLID,4
NOVA-PLY,
STANDARD STYLE
TAPERED
1
10
141311
2
NOTE: 1ST DIGIT OF 2-DIGIT
7
6
TALLER10"
TALLER6"
FOR ADD-ON HIGH BACKS)(#21, #25 SUPPORT REQUIRED
SPECIFIED (REQUIRED
ADD-ON HIGH BACKS)
71612061636424
2321
747371
FOR KNEELERS OR
VERTICAL
OPTIONAL STYLE, IF
Comparable high back
HIGH BACK STYLE
TAPERED
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0" SUPPORT CONSTRUCTIONS...
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0"
STANDARD SUPPORTS
1" = 1'-0"
SUPPORT STYLES...
1 7/16"1 7/16" 1 7/16" 1 7/16"
MANUFACTURING COMPANY MANUFACTURING COMPANY
R
MANUFACTURING COMPANY
R
Updated 6/6/02
SMC\Custom Pew Binder\supports
H:\HFA\WORD\CUSTOM PEW BINDER\Sup Const-Style Base Shoe
To Update back of This Page See---
CAD\Custom Pew Binder\support combination detailsUpdated 1/16/02
Updated 8/23/00
Updated 5/18/0010/19/94
NOTE: 2ND DIGIT OF 2-DIGITSTANDARD SUPPORT NUMBER
FLUSH BASE(SUPPORTS ONLY)(FULL ENDS ONLY)
RECESSED BASE(FULL ENDS ONLY)
PROJECTED BASEPB RB FB
(SUPPORTS ONLY)FLUSH BASE
SOLID EDGE BANDRADIUS EDGE
VENEER FACE,
STANDARD SUPPORT NUMBER
0
PROJECTED BASE(FULL ENDS ONLY)
PB
NOVA-PLY,VENEER FACE,VENEER EDGEBAND
1BEVELED EDGE
VENEER FACE,SOLID EDGE BAND
NOVA-PLY,
(FULL ENDS ONLY)RECESSED BASE
RB FB
BUTCHER BLOCK
STANDARD SUPPORT NUMBERNOTE: 2ND DIGIT OF 2-DIGIT
3RADIUS EDGE
SOLID,4
NOVA-PLY,
STANDARD STYLE
TAPERED
1
10
141311
2
NOTE: 1ST DIGIT OF 2-DIGIT
7
6
TALLER10"
TALLER6"
FOR ADD-ON HIGH BACKS)(#21, #25 SUPPORT REQUIRED
SPECIFIED (REQUIRED
ADD-ON HIGH BACKS)
71612061636424
2321
747371
FOR KNEELERS OR
VERTICAL
OPTIONAL STYLE, IF
Comparable high back
HIGH BACK STYLE
TAPERED
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0" SUPPORT CONSTRUCTIONS...
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0"
STANDARD SUPPORTS
1" = 1'-0"
SUPPORT STYLES...
1 7/16"1 7/16" 1 7/16" 1 7/16"
MANUFACTURING COMPANY MANUFACTURING COMPANY
R
MANUFACTURING COMPANY
R
Options and AccessoriesSupports and Pew Backs
1 2 3 4 76
SupportsSelect a support style (model number 5 is not used)
Select a support edge profile* Support Selection
Support Style Edge Profile
Support Selection is:
&
Tapered Edge
Front edges always tapered
StandardVertical
Required with Kneelers orAdd-on High Backs
H-Style VerticalRequired for Radius Body
High-Backs#6 - 6" Taller than Standard#7 - 10" Taller than Standard(typically used on balcony risers)
Updated 6/6/02
SMC\Custom Pew Binder\supports
H:\HFA\WORD\CUSTOM PEW BINDER\Sup Const-Style Base Shoe
To Update back of This Page See---
CAD\Custom Pew Binder\support combination detailsUpdated 1/16/02
Updated 8/23/00
Updated 5/18/0010/19/94
NOTE: 2ND DIGIT OF 2-DIGITSTANDARD SUPPORT NUMBER
FLUSH BASE(SUPPORTS ONLY)(FULL ENDS ONLY)
RECESSED BASE(FULL ENDS ONLY)
PROJECTED BASEPB RB FB
(SUPPORTS ONLY)FLUSH BASE
SOLID EDGE BANDRADIUS EDGE
VENEER FACE,
STANDARD SUPPORT NUMBER
0
PROJECTED BASE(FULL ENDS ONLY)
PB
NOVA-PLY,VENEER FACE,VENEER EDGEBAND
1BEVELED EDGE
VENEER FACE,SOLID EDGE BAND
NOVA-PLY,
(FULL ENDS ONLY)RECESSED BASE
RB FB
BUTCHER BLOCK
STANDARD SUPPORT NUMBERNOTE: 2ND DIGIT OF 2-DIGIT
3RADIUS EDGE
SOLID,4
NOVA-PLY,
STANDARD STYLE
TAPERED
1
10
141311
2
NOTE: 1ST DIGIT OF 2-DIGIT
7
6
TALLER10"
TALLER6"
FOR ADD-ON HIGH BACKS)(#21, #25 SUPPORT REQUIRED
SPECIFIED (REQUIRED
ADD-ON HIGH BACKS)
71612061636424
2321
747371
FOR KNEELERS OR
VERTICAL
OPTIONAL STYLE, IF
Comparable high back
HIGH BACK STYLE
TAPERED
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0" SUPPORT CONSTRUCTIONS...
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0"
STANDARD SUPPORTS
1" = 1'-0"
SUPPORT STYLES...
1 7/16"1 7/16" 1 7/16" 1 7/16"
MANUFACTURING COMPANY MANUFACTURING COMPANY
R
MANUFACTURING COMPANY
R
Updated 6/6/02
SMC\Custom Pew Binder\supports
H:\HFA\WORD\CUSTOM PEW BINDER\Sup Const-Style Base Shoe
To Update back of This Page See---
CAD\Custom Pew Binder\support combination detailsUpdated 1/16/02
Updated 8/23/00
Updated 5/18/0010/19/94
NOTE: 2ND DIGIT OF 2-DIGITSTANDARD SUPPORT NUMBER
FLUSH BASE(SUPPORTS ONLY)(FULL ENDS ONLY)
RECESSED BASE(FULL ENDS ONLY)
PROJECTED BASEPB RB FB
(SUPPORTS ONLY)FLUSH BASE
SOLID EDGE BANDRADIUS EDGE
VENEER FACE,
STANDARD SUPPORT NUMBER
0
PROJECTED BASE(FULL ENDS ONLY)
PB
NOVA-PLY,VENEER FACE,VENEER EDGEBAND
1BEVELED EDGE
VENEER FACE,SOLID EDGE BAND
NOVA-PLY,
(FULL ENDS ONLY)RECESSED BASE
RB FB
BUTCHER BLOCK
STANDARD SUPPORT NUMBERNOTE: 2ND DIGIT OF 2-DIGIT
3RADIUS EDGE
SOLID,4
NOVA-PLY,
STANDARD STYLE
TAPERED
1
10
141311
2
NOTE: 1ST DIGIT OF 2-DIGIT
7
6
TALLER10"
TALLER6"
FOR ADD-ON HIGH BACKS)(#21, #25 SUPPORT REQUIRED
SPECIFIED (REQUIRED
ADD-ON HIGH BACKS)
71612061636424
2321
747371
FOR KNEELERS OR
VERTICAL
OPTIONAL STYLE, IF
Comparable high back
HIGH BACK STYLE
TAPERED
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0" SUPPORT CONSTRUCTIONS...
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0"
STANDARD SUPPORTS
1" = 1'-0"
SUPPORT STYLES...
1 7/16"1 7/16" 1 7/16" 1 7/16"
MANUFACTURING COMPANY MANUFACTURING COMPANY
R
MANUFACTURING COMPANY
R
Solid, Butcher Block Radius Edge
Solid, Butcher Block Beveled Edge
Updated 6/6/02
SMC\Custom Pew Binder\supports
H:\HFA\WORD\CUSTOM PEW BINDER\Sup Const-Style Base Shoe
To Update back of This Page See---
CAD\Custom Pew Binder\support combination detailsUpdated 1/16/02
Updated 8/23/00
Updated 5/18/0010/19/94
NOTE: 2ND DIGIT OF 2-DIGITSTANDARD SUPPORT NUMBER
FLUSH BASE(SUPPORTS ONLY)(FULL ENDS ONLY)
RECESSED BASE(FULL ENDS ONLY)
PROJECTED BASEPB RB FB
(SUPPORTS ONLY)FLUSH BASE
SOLID EDGE BANDRADIUS EDGE
VENEER FACE,
STANDARD SUPPORT NUMBER
0
PROJECTED BASE(FULL ENDS ONLY)
PB
NOVA-PLY,VENEER FACE,VENEER EDGEBAND
1BEVELED EDGE
VENEER FACE,SOLID EDGE BAND
NOVA-PLY,
(FULL ENDS ONLY)RECESSED BASE
RB FB
BUTCHER BLOCK
STANDARD SUPPORT NUMBERNOTE: 2ND DIGIT OF 2-DIGIT
3RADIUS EDGE
SOLID,4
NOVA-PLY,
STANDARD STYLE
TAPERED
1
10
141311
2
NOTE: 1ST DIGIT OF 2-DIGIT
7
6
TALLER10"
TALLER6"
FOR ADD-ON HIGH BACKS)(#21, #25 SUPPORT REQUIRED
SPECIFIED (REQUIRED
ADD-ON HIGH BACKS)
71612061636424
2321
747371
FOR KNEELERS OR
VERTICAL
OPTIONAL STYLE, IF
Comparable high back
HIGH BACK STYLE
TAPERED
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0" SUPPORT CONSTRUCTIONS...
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0"
STANDARD SUPPORTS
1" = 1'-0"
SUPPORT STYLES...
1 7/16"1 7/16" 1 7/16" 1 7/16"
MANUFACTURING COMPANY MANUFACTURING COMPANY
R
MANUFACTURING COMPANY
R
Solid, 2 Ply Radius Edge(Only standard with Radius Pew Body)
3 5 6
* Additional support construction options available on request. To specify, use one of the following number selections in the green "Edge Profile" circle at right. (0) for veneer face and edgeband (1) for veneer face and solid edge band with beveled edge (4) for veneer face and solid edge band with radius edge
Support selections are 2-digit numbers that consist of a support style selection followed by an edge profile selection . For example, if you have a 6" taller pew with a beveled edge profile, your support selection is 65. Fill in your support information below .
Updated 6/6/02
SMC\Custom Pew Binder\supports
H:\HFA\WORD\CUSTOM PEW BINDER\Sup Const-Style Base Shoe
To Update back of This Page See---
CAD\Custom Pew Binder\support combination detailsUpdated 1/16/02
Updated 8/23/00
Updated 5/18/0010/19/94
NOTE: 2ND DIGIT OF 2-DIGITSTANDARD SUPPORT NUMBER
FLUSH BASE(SUPPORTS ONLY)(FULL ENDS ONLY)
RECESSED BASE(FULL ENDS ONLY)
PROJECTED BASEPB RB FB
(SUPPORTS ONLY)FLUSH BASE
SOLID EDGE BANDRADIUS EDGE
VENEER FACE,
STANDARD SUPPORT NUMBER
0
PROJECTED BASE(FULL ENDS ONLY)
PB
NOVA-PLY,VENEER FACE,VENEER EDGEBAND
1BEVELED EDGE
VENEER FACE,SOLID EDGE BAND
NOVA-PLY,
(FULL ENDS ONLY)RECESSED BASE
RB FB
BUTCHER BLOCK
STANDARD SUPPORT NUMBERNOTE: 2ND DIGIT OF 2-DIGIT
3RADIUS EDGE
SOLID,4
NOVA-PLY,
STANDARD STYLE
TAPERED
1
10
141311
2
NOTE: 1ST DIGIT OF 2-DIGIT
7
6
TALLER10"
TALLER6"
FOR ADD-ON HIGH BACKS)(#21, #25 SUPPORT REQUIRED
SPECIFIED (REQUIRED
ADD-ON HIGH BACKS)
71612061636424
2321
747371
FOR KNEELERS OR
VERTICAL
OPTIONAL STYLE, IF
Comparable high back
HIGH BACK STYLE
TAPERED
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0" SUPPORT CONSTRUCTIONS...
FULL SIZE SECTIONS
BASE SHOES3/8" = 1'-0"
STANDARD SUPPORTS
1" = 1'-0"
SUPPORT STYLES...
1 7/16"1 7/16" 1 7/16" 1 7/16"
MANUFACTURING COMPANY MANUFACTURING COMPANY
R
MANUFACTURING COMPANY
R
Solid Wood Base Shoe Option Pew Back Caps
Flush (FB) Oval (standard) Flat (optional)
Select to add
Standard supports do not have a base shoe, but one can be added as an option . The base shoe will be used only on the end supports closest to the cantilevered ends .
15sauderwor ship.com
Options and AccessoriesSupports and Pew BacksCheck Box to Make Your
Front Selection(s)
Pew and Frontal Accessories
Frontal Options
308-001 3-Book308-0401 3-Book, Radius
415-1700with 450-171 End
415-1705with 450-1705 End
415-4100 Veneer415-4111 Solid Wood
308-0547 Underseat 4-Book
308-0378 4-Book308-0478 4-Book, Radius
313-006 Card, Communion Cup and Pencil Holder
313-0007 Card and Pencil Holder 309-0014 Metal Kneeler
308-0143 Continuous308-0443 Continuous, Radius
309-0012 Wood Kneeler309-0412 Wood Kneeler, Radius
Please select front or rear opening.Also available 2-Book or continuous.
Select as shown or surface mounted outside book rack.
Select as shown or surface mounted outside book rack.
415-2106with 450-2108 End
415-2183with 450-2106 End
415-4105with 450-4109 End
415-4105 with 450-4909 EndAll frontals available with ends to match pew end selection (pages 12-13). Radius frontals available (2106 body only).
Supp
ort S
ectio
n |
Pew
Cap
16
Platform FurnitureFabrics, Finishes and Species
• Nine standard wood species as well as a wide range of customer requested wood species .
• Hundreds of fabric patterns and associated color palettes
• Multiple national mills and fabric distributors to ensure that our fabrics are fresh and current .
Once selections have been narrowed, fabric and wood samples can be ordered through a Sauder Worship Seating representative .
Physical samples of over 200 combinations of wood species and finish colors, as well as hundreds of fabric colors and patterns are available to assist in making a final selection.
View Fabrics, Finishes, and Species at sauderworship.com/resources
Our Fabric Pattern
Our Wood Specie
Our Fabric Pattern
Our Finish Color
Sauder Worship Seating® works with:
17sauderwor ship.com
Platform FurnitureFabrics, Finishes and Species
Woo
d Sp
ecies
and
Fini
sh
The platform is often the most unique and important space in a sanctuary . We understand that there are no two worship facilities alike and embrace the ideas and designs you have for your platform furnishings .
If you, your architect or your designer have specific designs in mind, share them with your Sauder Worship Seating representative . We will create detailed drawings of your concept . Once the drawings are approved, our seasoned craftsmen will bring your ideas to life .
Please view the galleries of images at sauderworship .com or contact your local Sauder Worship Seating representative to learn more about options for platform furniture .
sauderworship.com
18
Next Steps and Target DatesAppendix
People Won’t Sit the Way You Think They Will
Building Code Requirements
In the early planning stages of a new church, or when replacing pews in your existing building, consider how many people you'll want to seat . How much space will each person take?
Building code is the standard that architects and builders are required to use to determine seating capacity . It says to allow 18" of seating per person . To put this into perspective, think about how much room you have in a coach seat on an airplane . Regulation seats actually give you 19" per person . That's pretty close to the person next to you!
According to code, a 15-foot (180") pew will seat 10 people who sit shoulder-to-shoulder filling the entire pew length.
According to research on the way people actually sit, a 15-foot (180") pew will fit only 7 people.
18" 19" 20" 21" 22" 23" 24" 25" 26" 27"
100 150 158 167 175 183 192 200 208 217 225
200 300 317 333 350 367 383 400 417 433 450
300 450 475 500 525 550 575 600 625 650 675
400 600 633 667 700 733 767 800 833 867 900
500 750 792 833 875 917 958 1000 1042 1083 1125
600 900 950 1000 1050 1100 1150 1200 1250 1300 1350
800 1200 1267 1333 1400 1467 1533 1600 1667 1733 1800
1000 1500 1583 1667 1750 1833 1917 2000 2083 2167 2250
2000 3000 3167 3333 3500 3667 3833 4000 4167 4333 4500
3000 4500 4750 5000 5250 5500 5750 6000 6250 6500 6750
4000 6000 6333 6667 7000 7333 7667 8000 8333 8667 9000
FEET O
F PEW R
EQU
IRED
INCHES PER PERSONNUMBEROF PEOPLE
The chart below is a guide to help determine the number of feet per pew required for the number of people you wish to seat.
19sauderwor ship.com
Next Steps and Target DatesAppendix
Target Completion Date
1 . Review Customers Selections
Target Completion Date
2 .
Target Completion Date
4 .
Date
Target Completion Date
6 .
Date
Target Completion Date
Target Completion Date
5 .
Date
Sauder Worship Seating Representative
Date
Date
3 .
Approved By:
sauderworship.com
Manufacturing Member
© 2018 Sauder MFG Co. All rights reserved. Telephone: 419-446-9384 or 800-537-1530 • Fax: 419-446-4945 • [email protected]
Share Your VisionService and AttentionTrust your local Sauder representative to listen carefully to understand your vision, then he or she will apply their expertise and experience to help make your project a success .
Project ManagementIn addition to a personal sales representative, a team of dedicated professionals are assigned specifically to each project, providing communication, guidance and ensuring peace-of-mind .
Customize Your ProjectFrom seating throughout the church, to platform furniture, Sauder design experts and craftsmen bring your ideas to reality .
Church RemodelingSimply refreshing elements of the worship space can re-energize both the sanctuary and the congregation . Consider new upholstered cushions for solid seating, or reupholstering existing seating .
Materials and ResourcesBuilt from the finest, responsibly sourced, solid hardwoods, choose from the largest standard specie selection in the industry:
• Northern Red (rift or standard)• White Oak (rift or standard)• Cherry • African Mahogany • Maple • European Beech• Black WalnutPlease note, chair models other than Oaklok, Paragon, and Unity are made from beech only.
WS04670213 10/2018
Simplify the selection and ordering process by coordinating other seating areas in the church with the sanctuary . Visit sauderworship .com to view the many options available including:
• Auditorium seating • Side chairs • Dining and cafe chairs and tables • Sofas, loveseats and arm chairs
Complementary Church Furniture