PETROSTEP CI-I2 · Corrosion inhibitors used in oil and gas production, processing and...

2
PETROSTEP ® CI-I2 CORROSION INHIBITOR BRINGING VALUE TO THE SURFACE TM

Transcript of PETROSTEP CI-I2 · Corrosion inhibitors used in oil and gas production, processing and...

Page 1: PETROSTEP CI-I2 · Corrosion inhibitors used in oil and gas production, processing and transportation are typically multi-component blends containing several actives, formulation

PETROSTEP® CI-I2CORROSION INHIBITOR

BRINGING VALUE TO THE SURFACETM

Page 2: PETROSTEP CI-I2 · Corrosion inhibitors used in oil and gas production, processing and transportation are typically multi-component blends containing several actives, formulation

Corrosion inhibitors used in oil and gas production, processing and transportation are typically multi-component blends containing several actives, formulation aids and surfactants in a solvent package.

Imidazolines have been successfully used in the oilfield industry as components of corrosion inhibitor formulations. By their nature, they are oil soluble and thus form the basis of many oil-soluble formulations. However, they can be used in water-soluble blends when formulated with organic and/or inorganic acids.

PETROSTEP CI-I2 is a 100% active TOFA/DETA* (1:1) imidazoline used to formulate oil-soluble and water-soluble corrosion inhibitors for oilfield applications.

*Tail oil fatty acid/Diethanolamine

TYPICAL PROPERTIES

To learn more about PETROSTEP CI-I2 and other Stepan Oilfield Solutions products, email [email protected] or call 713.955.8100. For commercial ordering information, email [email protected].

BRINGING VALUE TO THE SURFACETM

PETROSTEP® IS A REGISTERED TRADEMARK OF STEPAN COMPANY. The information contained herein is based on the manufacturer’s own study and the works of others and is subject to change without prior notice. The information is not intended to be all-inclusive, including as to the manner and conditions of use, handling, storage or disposal or other factors that may involve additional legal, environmental, safety or performance considerations. Nothing contained herein grants or extends a license, express or implied, in connection with any patents issued or pending of the manufacturer or others, or shall be construed as a recommendation to infringe any patents. STEPAN COMPANY MAKES NO PRODUCT WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR USE, EXPRESS OR IMPLIED, AND NO OTHER WARRANTY OR GUARANTY, EXPRESS OR IMPLIED, IS MADE, INCLUDING AS TO INFORMATION REGARDING PERFORMANCE, SAFETY, SUITABILITY, STABILITY, ACCURACY, COMPLETENESS, OR ADEQUACY. Stepan Company (and its employees, subsidiaries and affiliates) shall not be liable (regardless of fault) to the vendee, its employees, or any other party for any direct, indirect, special or consequential damages arising out of or in connection with the accuracy, completeness, adequacy, furnishing, use, or reliance upon information provided herein. The vendee assumes and releases Stepan Company (and its employees, subsidiaries and affiliates) from all liability, whether in tort, contract or otherwise to the fullest extent possible under the relevant law. © Stepan Company, 2019

• Appearance at 25°C: Clear amber liquid• Specific gravity: 0.91 – 0.96 g/mL• Imidazoline: 75% min.• Total amine: 180 – 230 mg KOH/g • Flash point °C (°F): >93 (199) • Pour point °C (°F): -31 (-24)