Petroplastic's Brochure

8
 Industrial Plant, Junín de los Andes, Province of Neuquén, Argentina. Glass R e in f orce d E poxy Pipes - PETROLINE® -PETROTUBING® -PETROCASING®

Transcript of Petroplastic's Brochure

8/12/2019 Petroplastic's Brochure

http://slidepdf.com/reader/full/petroplastics-brochure 1/8

 

Industrial Plant,

Junín de los Andes,

Province of Neuquén,

Argentina.

Glass

Reinforced

Epoxy

Pipes

-PETROLINE® 

-PETROTUBING® 

-PETROCASING®

8/12/2019 Petroplastic's Brochure

http://slidepdf.com/reader/full/petroplastics-brochure 2/8

 

►  is a referent in market in technology, applications and manufacturing of GRE tubes. We have

more than 15 years working with these materials.

Among other uses, the GRE is an ideal material to use for upstream in the oil market. Within the oil market, Petroplastic SA

specializes in the use of GRE for line pipe, tubing, casing products and their respective fittings.

PRODUCTS

PETROLINE® PIPES FOR LINE PIPE

GRE Glass Reinforced Epoxy pipes, for all flow lines. Lightweight and easy to handle and install. Petroline tubes are available

in both 4TPI and 8 TPI (Threads Per Inch). PETROLINE can be easily assembled by hand without special tools or adhesives,

using a simple band wrench.

PETROCASING® PIPES FOR CASING

Petroplastic SA is a global pioneer in the use of GRE Casing. To ensure a successful application with complete safety for its

clients, Petroplastic casing appears as a high quality product, a result of high skilled engineering and of years of experience

offering recognized assistance service. Its 4TPI integral joints offer outstanding strength and fast installation.

PETROTUBING® PIPES FOR TUBING

We have developed the technology and special machinery that allow us, not only to design tubing, but also to manufacture

PetroTubing®. Thanks to our industrial plant in Argentina, now in full production, we are able to supply and install

PetroTubing®.

PETROPLASTIC FITTINGS

We proudly present our line of GRE fittings. All produced with an automatized process. This ensures that the original designswill be accomplished with no errors, generating high-tech quality products and increased volume production.

► For further information, please contact:

[email protected]

Central Offices in Bariloche

TEL: (54) (2944) 434200

Av. Manuel Belgrano 308

San Carlos de Bariloche,

Río Negro, Argentina

Buenos Aires Offices

TEL: (54) (11) 4814-1540/41/42/43

Arenales 1487 1er. piso

Buenos Aires, Argentina.

8/12/2019 Petroplastic's Brochure

http://slidepdf.com/reader/full/petroplastics-brochure 3/8

www.petroplastic.com.ar  [email protected] 

LOCATIONS OF

Industrial Plant- Junín de los Andes, Neuquén, Argentina

Central Offices- San Carlos de Bariloche, Río Negro,

Argentina

Corporate Offices- Buenos Aires, Argentina

Operation Bases

- Rincón de los Sauces, Neuquén, Argentina

- Cañadón Seco

- Diadema

Outside Argentina, contacts in:

-  Brazil-  Colombia-  Venezuela-  Spain

OUR HISTORY

Petroplastic SA has over 15 years experience working withcomposite materials. Our extensive experience regarding

these materials has placed the company at the

technological forefront as a result of our continual search

for new possibilities and uses, as well as finding efficient

solutions to corrosion problems.

Petroplastic aims to position itself as a top quality GRE

tubular products and fittings supplier, for the petroleum

industry.

Focused on its clients´ needs, Petroplastic created an

infrastructure of operation bases that altogether with the

engineering department have offered immediate solutions

to the requirements of different companies.

As a consequence of this client oriented goal, Petroplastic

planned and concluded some years ago its project of the

construction of its own plant in the Province of Neuquén.

Petroplastic is undergoing a process of constant growth

and expansion not only in Argentina but also into other

countries.

Petroplastic´s Industrial Plant manufactures and delivers

products of the finest quality, under the most severe

controls.

Industrial Plant at Junín de los Andes

Petroplastic has a 4500 sq. meters Industrial Plant at

Junín de los Andes Industrial Park, Province of Neuquén,

Argentina

Petroplastic, under the advice from the School of

Mechanical & Systems Engineering of the University of

Newcastle, commissioned the prestigious INVAP,(an

internationally recognized centre for cutting edge

technology) to help with the design, construction and fine-

tuning of specific equipment for the manufacture of our

products. After a multi-million dollar investment, we now

have a plant which is model in its field consisting of the

most updated machines with digital controls for both

tubes and fittings, driven by highly skilled staff.

Petroplastic has implemented a Quality Control System

that together with our laboratories equipped with the

latest technology, reassures the quality of our products.In these laboratories, Petroplastic examines the quality of

product through all the manufacturing process (from raw

material to final product)

Lab 1: General Quality Control test Laboratory

Lab 2: Burst Test, axial breakage test and combined

traction and pressure test Laboratory

Lab 3: Regression test Laboratory

Petroplastic obtained:

-  ISO 9001 Certification and API SpecificationQ1, for the manufacturing of GRE (GlassReinforced Epoxy) tubings and accessories inthe Plant in Junin de los Andes.

Our quality control systems guarantee that our products will have a similar performance or even better than other products in

the market. 100% of the tubes produced in the plant are hydraulically tested to an additional 50% over the work and design

pressure.

8/12/2019 Petroplastic's Brochure

http://slidepdf.com/reader/full/petroplastics-brochure 4/8

8/12/2019 Petroplastic's Brochure

http://slidepdf.com/reader/full/petroplastics-brochure 5/8

 

Why GRE?

Cathode protection No

Chemical resistance High

Internal corrosion No

External corrosion No

Bacterial resistance High

Anti-corrosive coating No

Corrosion protector No

Clearing pig No

Installation cost 0,25

Welding No

Radiography No

Hazen-Williams 150

Thermal conductivity <1 vs Steel

Paraffin build-up Low

Carbonate buil-up Low 

Life span (years) over 20

Heavy equipment No

Relative weight (vs. steel) 0,25

Required labour Low

Installation time (vs. steel) 0,40

General characteristics of the pipes: 

• Excellent resistance to corrosion and long service life.

• Superior Flow characteristics.

• Low paraffin’s and solid build-up.

• Installation cost much lower than steel.

• Installation unaffected by weather conditions.

• GRE reduces temperature gain or loss. This maintains

temperature in a more stable condition.

• The tubes weigh about ¼ the weight of steel.

• Fast and reliable installation. API 8 RD EUE Threads and

available in 4 TPI.

• Operational pressures in line pipe, tubing and casing up

to 3500 PSI.

• Exceptional performance against pressures and high

capacity load.

• Temperature resistance climbs up to 82ºC.

• Ground PH and UV rays resistant.

8/12/2019 Petroplastic's Brochure

http://slidepdf.com/reader/full/petroplastics-brochure 6/8

www.petroplastic.com.ar  [email protected] 

► Uses of GRE: 

• Transport lines for oil, gas, water, etc.

• Lines for chemical disposal.

• Injection lines.

• Lines for gathering and gas transportation.

• Lines for minerals in solution and water injection in

mines.

• Lines for recirculation.

• Line for disposal formation waters.

• Lines for chemical transportation.

• Water injection: tubing and casing.

• Production wells: Tubing and casing.

► 4 TPI vs. 8 RD

Brief  Comparison between 4TPI and 8 RD EUE in GRE tubes:

The advantages that 4 TPI have over the 8 RD EUE can be summarized in:

  More Robust:

It allows not being so careful during manipulation and even though keeps working correctly.

  Alignment:

During mounting, it diminishes typical alignment requirements of the 8 RD EUE. This is particularly important indiameters over 4”.

  Double Seal:

O-Ring and threads provide a double seal. When the appropriate torque is exerted, contact pressure between threads isgreater than the circulating liquid’s hydrostatic pressure. The O-Rings offer ahigh pressure seal, keeping Teflon and the lubricant grease in the box, and the internal fluids out of thethreads. When the 4TPI is installed correctly, there is no need to have an O-Ring to secure the seal.

  More resistant:

As the 4 TPI thread’s root is more than twice the width than that of the 8 RD EUE thread’s root, it is less probable thatthreads could be damaged when they hit each other during mounting. This is particularly important when used in wells,where the tubes’ weight rest on the threads before engagement.In line pipe applications where both the diameter and unit weight are considerably large, 4 TPI eliminate cross threadingproblems in larger diameters.

  No thrust blocks required:

Threads are strong enough to resist extreme efforts during high pressures, with no need to add thrust blocks to supportthem.

8/12/2019 Petroplastic's Brochure

http://slidepdf.com/reader/full/petroplastics-brochure 7/8

www.petroplastic.com.ar  [email protected] 

  Installation and recovery:

Much easier. It reduces cross threading in line pipe and discards in its use as tubing.

  Greater pitch diameter:

The interior diameter of the tubes is controlled by the mandrel’s diameter. The maximum available wall thickness is

determined by the thread’s root diameter. In all cases the pitch diameter is greater in 4 TPI products than in those ofequivalent diameter in 8 RD EUE products. Consequently in high pressure applications, the interior diameter isgreater in Petroplastic tubes than those in other products in the market, this results in an increased flow capacity.

  Shallow pitch angle:

To compensate for the fast advance of 4 threads per inch, the pitch angle in Petroplastic threads is reduced comparedto 8 RD threads. This enables the installer to afghan contact pressure between threads at torque levels comparableto 8 RD threads. With a shallow pitch angle it is easier to maintain tight matching tolerances between the male andfemale thread in manufacturing.

  One-piece construction:

Petroplastic joints have an all-in-one piece construction which results in increased resistance. Threads are not bondedas those from other manufacturers.

8/12/2019 Petroplastic's Brochure

http://slidepdf.com/reader/full/petroplastics-brochure 8/8

www.petroplastic.com.ar  [email protected] 

► For further information, please contact:

[email protected]

Offices in Bariloche

TEL: (54) (2944) 434200

Av. Manuel Belgrano 308

San Carlos de Bariloche, Rio Negro, Argentina

Buenos Aires Offices

TEL: (54) (11) 4814-1540/41/42/43

Arenales 1487 1er. piso

Buenos Aires, Argentina.