Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email:...
Transcript of Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email:...
![Page 1: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/1.jpg)
Petroleum and Gas Processing(TKK-2136)
14/15 Fall semester
Instructor: Rama OktavianEmail: [email protected] Hr.: M.13-15, Tu. 13-15, W. 13-15, Th. 13-15, F. 09-11
![Page 2: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/2.jpg)
Outlines
1. Catalytic reforming 1. Catalytic reforming
2. Reformer configuration 2. Reformer configuration
3. Reformer material balance 3. Reformer material balance
4. Isomerization 4. Isomerization
![Page 3: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/3.jpg)
Catalytic reforming
![Page 4: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/4.jpg)
Catalytic reforming
Catalytic reforming process
a catalytic process which converts low octane naphthenic into higher octane reformate products. It is a highly endothermic process requiring large amounts of energy. the process of transforming C7–C10 hydrocarbons with low octane numbers to aromatics and iso-paraffins which have high octane numbers
gasoline blending and aromatic rich reformate for aromatic production
![Page 5: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/5.jpg)
Catalytic reforming
Reformer feed characterization
![Page 6: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/6.jpg)
Catalytic reforming
Reformer feed and product characterization
FEED PRODUCT
Paraffins 30-70 30-50
Olefins 0-2 0-2
Naphthenes 20-60 0-3
Aromatics 7-20 45-60
![Page 7: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/7.jpg)
Catalytic reforming
Research Octane Number (RON)
the percentage by volume of iso-octane in a mixture of iso-octane and n-heptane
![Page 8: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/8.jpg)
Catalytic reforming
Role of reformer
![Page 9: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/9.jpg)
Catalytic reforming
Role of reformer
The catalytic reformer is one of the major units for gasoline production in refineries.
It can produce 37 wt% of the total gasoline pool. Other units
- fluid catalytic cracker (FCC) - alkylation unit - isomerization unit
![Page 10: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/10.jpg)
Catalytic reforming
Reforming reaction
1. Naphthene Dehydrogenation of Cyclohexanes2. Paraffin Dehydrogenation3. Dehydrocyclization4. Isomerization5. Hydrocracking Reactions6. Coke Deposition
Reforming reaction network
![Page 11: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/11.jpg)
Catalytic reforming
Calculating dehydrogenation reaction
![Page 12: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/12.jpg)
Catalytic reforming
Reforming reaction
1. Naphthene Dehydrogenation of Cyclohexanes2. Paraffin Dehydrogenation3. Dehydrocyclization4. Isomerization5. Hydrocracking Reactions6. Coke Deposition
![Page 13: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/13.jpg)
Catalytic reforming
Process step in catalytic reforming
1. Feed preparation: Naphtha Hydrotreatment removal of the various catalyst poisons - sulfur, nitrogen, halogens, oxygen, water, olefins, di olefins, arsenic and other metals
![Page 14: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/14.jpg)
Catalytic reforming
Process step in catalytic reforming
2. Preheating: Temperature Control
3. Catalytic Reforming and Catalyst Circulation and Regeneration incase of continuous reforming process
4. Product separation: Removal of gases and Reformate by fractional Distillation
5. Separation of aromatics in case of Aromatic production
![Page 15: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/15.jpg)
Catalytic reforming
Classification of process
1. Semi-Regenerative Fixed Bed reactors
2. Cyclic Fixed Bed Reformers - Adding an extra-reactor to avoid shutting down the whole unit during regeneration. Three reactors can be running while the forth is being regenerated
3. Continuous Reformers
![Page 16: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/16.jpg)
Catalytic reforming
Classification of process
1. Semi-Regenerative Fixed Bed reactors
![Page 17: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/17.jpg)
Catalytic reforming
Semi-Regenerative Fixed Bed reactors
first reactor Reactions such as dehydrogenation of paraffins and naphthenes which are very rapid and highly endothermic
![Page 18: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/18.jpg)
Catalytic reforming
Semi-Regenerative Fixed Bed reactors
second reactor Reactions that are considered rapid, such as paraffin isomerization and naphthens dehydroisomerization, give moderate temperature decline
![Page 19: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/19.jpg)
Catalytic reforming
Semi-Regenerative Fixed Bed reactors
Third reactor slow reactions such as dehydrocyclization and hydrocracking give low temperature decline.
![Page 20: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/20.jpg)
Catalytic reforming
Classification of process
1. Semi-Regenerative Fixed Bed reactors
![Page 21: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/21.jpg)
Catalytic reforming
Classification of process
3. Continuous Reformers
Licensed by CCR Platforming UOP Process
Process description- The catalyst moves downwards by gravity from the first reactor (R1) to the
forth reactor (R4)
- The catalyst is sent to the regenerator to burn off the coke and then sent back to the first reactor R1
- The final product from R4 is sent to the stabilizer and gas recovery section
Process variable- operated at lower hydrogen partial pressure (PH2 = 3 bar)- reformate yield gain of nearly 10 vol%
![Page 22: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/22.jpg)
Catalytic reforming
Classification of process
3. Continuous Reformers
![Page 23: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/23.jpg)
Catalytic reforming
Variable process
1. Catalyst type – affect basic catalyst formulation (metal-acid loading), chloride level, platinum level, and activator level - The catalyst used for reforming is a bifunctional catalyst composed of platinum metal on chlorinated alumina
2. Reaction temperature – control the reaction rate and product, usually operates at 560 C, above that temperature will form petroleum coke
3. Space velocity – higher space velocity will decrease residence time and lower Octane number of product
4. Reactor pressure – will affect to yield of product or hydrogen formation
5. Hydrogen/Hydrocarbon ratio
![Page 24: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/24.jpg)
Catalytic reforming
Catalyst type
The catalyst used for reforming is a bifunctional catalyst composed of platinum metal on chlorinated alumina.
Platinum the centre for the dehydrogenation reaction
an acidic site to promote structure changes - cyclization of paraffins - isomerization of the naphthenes.
chlorinated alumina
![Page 25: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/25.jpg)
Catalytic reforming
Catalyst type
Impurities that might cause deactivation or poisoning of the catalyst include: coke, sulphur, nitrogen, metals and water.
The reformer should be operated at high temperature and low pressure to minimize coke deposition.
![Page 26: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/26.jpg)
Catalytic reforming
Process comparison
![Page 27: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/27.jpg)
Catalytic reforming
Calculating material balance in catalytic reformer
Yield correlations for the reformer were developed as given
![Page 28: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/28.jpg)
Catalytic reforming
Calculating material balance in catalytic reformer
Example
Solution
![Page 29: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/29.jpg)
Catalytic reforming
Calculating material balance in catalytic reformer
Solution
![Page 30: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/30.jpg)
Isomerization
Isomerization of Light Naphtha
Isomerization is the process in which light straight chain paraffins of low RON (C6, C5 and C4) are transformed with proper catalyst into branched chains with the same carbon number and high octane numbers.
Light naphtha from the hydrotreated naphtha (HTN) C5=80 ˚C is used as a feed to the isomerization unit.
![Page 31: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/31.jpg)
Isomerization
Isomerization reaction
Isomerization is a reversible and slightly exothermic reaction:
The conversion to iso-paraffin is not complete since the reaction is equilibrium conversion limited. It does not depend on pressure, but it can be increased by lowering the temperature.
However operating at low temperatures will decrease the reaction rate. For this reason a very active catalyst must be used.
![Page 32: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/32.jpg)
Isomerization
Isomerization catalysts
Two types of isomerization catalysts
The standard Pt/chlorinated alumina with high chlorine content
The Pt/zeolite catalyst
![Page 33: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/33.jpg)
Isomerization
Standard isomerization catalysts
This bi-functional nature catalyst consists of highly chlorinated alumina responsible for the acidic function of the catalyst.
Platinum is deposited (0.3–0.5 wt%) on the alumina matrix.
Platinum in the presence of hydrogen will prevent coke deposition, thus ensuring high catalyst activity.
The reaction is performed at low temperature at about 130 ˚C to improve the equilibrium yield.
![Page 34: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/34.jpg)
Isomerization
Zeolite catalyst
Zeolites are used to give an acidic function to the catalyst.
Metallic particles of platinum are impregnated on the surface of zeolites and act as hydrogen transfer centres.
The zeolite catalyst can resist impurities and does not require feed pretreatment, but it does have lower activity and thus the reaction must be performed at a higher temperature of 250 ˚C (482 F).
![Page 35: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/35.jpg)
Isomerization
Isomerization catalyst comparison
![Page 36: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/36.jpg)
Isomerization
Isomerization yield
The reformate yield from light naphtha isomerization is usually very high (>97 wt%).
Typical yields are given in Table
![Page 37: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/37.jpg)
Isomerization
Isomerization yield balance
![Page 38: Petroleum and Gas Processing(TKK-2136) 14/15 Fall semester Instructor: Rama Oktavian Email: rama.oktavian86@gmail.com Office Hr.: M.13-15, Tu. 13-15, W.](https://reader035.fdocuments.us/reader035/viewer/2022062515/56649c785503460f9492d233/html5/thumbnails/38.jpg)
Isomerization
Solution
Isomerization yields