PETROL MINI SKID STEER LOADER - ozdiggers.com.au · PETROL MINI SKID STEER LOADER Ozdiggers...
2
PETROL MINI SKID STEER LOADER THE TOP DIGGERS FOR DOWN UNDER RELIABLE. AUSSIE OWNED & OPERATED. ATTACHMENTS FINANCE AVAILABLE Contact us for details: Ripper Snow blower Digger Sweeper Trench filler Angle blade Rock bucket Closed sweeper Auger Lawn mower Backhoe Pallet fork Breaker Grapple Lawn ripper Mixer Trencher Leveller NSW OFFICE Jamie Bella PH: +61 499 825 999 [email protected] http://www.ozdiggers.com.au/ QLD OFFICE David Bella PH: +61 414 486 428 [email protected] http://www.ozdiggers.com.au/
Transcript of PETROL MINI SKID STEER LOADER - ozdiggers.com.au · PETROL MINI SKID STEER LOADER Ozdiggers...
PETROL MINI SKID STEER LOADER
THE TOP DIGGERS FOR DOWN UNDERRELIABLE. AUSSIE OWNED & OPERATED.
ATTACHMENTS
FINANCE AVAILABLEContact us for details:
Ripper
Snow blower
Digger
Sweeper
Trench filler
Angle blade
Rock bucket
Closed sweeper
Auger
Lawn mower
Backhoe
Pallet fork
Breaker
Grapple
Lawn ripper
Mixer
Trencher
Leveller
NSW OFFICEJamie BellaPH: +61 499 825 [email protected]://www.ozdiggers.com.au/
QLD OFFICEDavid BellaPH: +61 414 486 [email protected]://www.ozdiggers.com.au/
ABOUT US
PETROL MINI SKID STEER LOADER
Ozdiggers manufacture premium quality earthmoving machinery to supply Australia with the most reliable equipment on the ground, and on the market.
Our Mini Skid Steer Loaded is reliable, safe and to built to deliver maximum performance for Australia’s most demanding environments. Designed by Australians, for Australians, OzDiggers Mini Skid Steer Loaders are for those who like to get it done, and get it done right.
• 17.2kw, V-twin 2 cylinder Briggs & Stratton
Engine
• Italian HC control valve
• Japan NSK bearing, 60H strong chains
• Big aluminium radiator, LED lights
• 400kg load capacity
• 3600 rpm rated speed.
• Modular Attachment System
• Designed by Australians for Australians
SPECIFICATIONS
FEATURESOD-127W WHEELEDDIMENSIONSOperating height 2452mm
1740mm
1370mm
1150mm
801mm
1914mm
657mm
23°
2170mm
140mm
1282mm
Height to bucket hinge pin
Height to top
Overall length with GP bucketOverall length without bucketWheelbase
Overall width
Min ground clearance
Angle of departure
Turning radius front without bucket
Front turning radius
POWER HYDRAULIC SYSTEM
Make System pressureBrigg & Stratton “Vanguard” 180 bar
Fuel typeFlow rate
Petrol - Unleaded58 L/min
Rating power 17.3kw
Cylinders V-Twin 2 Cylinder
Displacement 1627cc
Rated speed 3600 rpm
Max drive speed 6km/h
FLUID CAPACITIESFuel tank capacity 23 L
Engine Oil 1.5 L
Hydraulic Resrviour capacity
30 LElectrical Voltage 12 V
Battry type 45AH made by YUASA
1026mmRear turning radius
960mmTread width, ceterline to ceterline
