Pet cremation-cremator-sb-ab-datasheet-[ai]
Transcript of Pet cremation-cremator-sb-ab-datasheet-[ai]
Addfield Environmental Systems LimitedHollies Park | Cannock | Staffordshire | WS11 1DBwww.addfield.co.uk | [email protected] | 01543 571280
‘The most thermally e�cient,robust and reliableanimal incineratorson the market
Simply Built Better !’
AI Controller
SB-AB
Refractory
SB-AB 400Kg Load CapacityDuel Loading Pet Cremator
CFD Modelling
One of our larger low capacity machines, extremely robust and e�cient featuring a 10mm thick steel periphery.Complete with a pre-cast block abrasion/impact resistant seal that protects the refractory from mechanical loading. The SB-AB pet cremation unit has a duel loading design, either via the top loading lid - ideal for larger animals or by using one of the two side loading doors. The machine has a main chamber volume of 0.93m³ and is capable of a constant burn rate up to 50kg per hour cleanly and e�ciently every time. DEFRA and DARD approved.
SB-AB
400Kg Load CapacityDuel Loading Pet Cremator
Machine Specifications: SB-AB
*These emissions are based on minimum waste calori�c values 45.7MJ/kg (animal carcase). With no other waste streams present other than general packaging containers that do not make up more than 1.5% of the total load weight.
(Not detectable under standard operating conditions)
(Not detectable under standard operating conditions)
Carbon Dioxide (C02)Water (H20) Oxygen (02)Nitrogen (N2)Smoke
Odour
Volume of ash
Expected Emissions* % by Volume
Fuel Input Diesel Composition %CarbonHydrogenNitrogenOxygen
The Add�eld range of cremators are CE Certi�ed to BS EN 746-2 :1997, a recent emissions testing concluded the following results based on two second residue time within the secondary chamber, results arewell below the EC limits.
The pet cremation range is designed as a two stagecrematory unit comprising of a primary loadingchamber and a secondary after burner chamber. This afterburner system draws the hot gases from theprimary chamber, this ensures a clean (and compliant) burn at temperatures of 850-1150°C
CHNO
86%13.2%0.70%0.00%
7.4%22%6%
64.5%0%
0%
1-3%
Composition of fuel being used:
Robust, Reliable... ...and E�cient
Fuel Options:
2
2
1
† Based on general municipal waste streams* Depending on the type waste stream being loaded and excludes heat up time.
We reserve the right to change the speci�cation, dimensions and quality of materials from time to time, so long as the alteration is minor or an improvement to the said products.
†
Addfield Environmental Systems LimitedHollies Park | Cannock | Staffordshire | WS11 1DBwww.addfield.co.uk | [email protected] | 01543 571280
External Length (mm) External Width (mm) External Height/Less Flue(mm)
Primary Chamber Sizes:Internal Length (mm) Internal Width (mm) Internal Height (mm)
Chamber Volume (m³)
Weight (Approx. Tonnes)
CE CertifiedEU Regulations Compliant
Max Load Capacity (kg) Nominal Burn Rate* (kg/hr) Thermal Capacity (kw/hr)
Power Supply 50/60hz
Diesel LPG N-Gas
32702286
3860/2660
1640806700
0.93
3.6
YESYES
40050-75190
210/230v
YesYesYes
(Dependent on waste stream)
Addfield Environmental Systems LimitedHollies Park | Cannock | Staffordshire | WS11 1DBwww.addfield.co.uk | [email protected] | 01543 571280
Computational Fluid Dynamically Modelled Crematory
Secondary Chamber• Fully insulated internal refractory lining, constructed from high grade low thermal mass insulation. • One secondary chamber burnout burner, temperature controlled on-off, complete with internal air fans• Integrated combustion burner air fans with automatically controlled distribution to their designated area.• One temperature sensor mounting point at the top of the chamber ensuring the chamber reaches the necessary 850°C minimum.
Primary Chamber• Fully insulated internal refractory lining, constructed from high grade refractory brick ensuring a self-supporting interlocked arrangement.• One manually operated, access lid• One waste ignition burner, temperature controlled on-off, complete with internal air fans• Pre-cast block impact zone, protects the refractory lining when loading.• An optional removable partition stud wall
SB-AB 400Kg Load CapacityDuel Loading Pet Cremator
General Construction• Pre-fabricated 8 & 10mm robust mild steel casing suitably stiffened and braced where necessary so as to be self-supporting throughout.• Paint finishing - The steel structures are completely painted using a two pack high grade paint system that is baked onto the steel structure at 70°C for 10hrs. The standard colour of the series is green for the primary and secondary chambers, lid, flue and counter balance.• Primary & secondary chamber lining thickness – 180mm, rated at 1260°C.• Low thermal mass roof lining.• Removable roof and back plate for ease of maintenance.• All combustion fuel pipe work and electrical systems are weather proof.• An optional extra, is a rapid cooling system, it reduces cool down times for faster reloading.• Excess air system can be fitted also as an optional extra, it allows for a faster burn rates.
Key Features:This modelling process allows us to identify hot andcold spot, gas velocities and surface temperatures within our incinerators.
We use this information to develop a more durable, robust and efficient incinerator by:• Identifying heat build-up and stress points.• Reducing thermal heat loss.• Designing out cold spots and ensuring sterilisation of waste material.
Addfield Environmental Systems LimitedHollies Park | Cannock | Staffordshire | WS11 1DBwww.addfield.co.uk | [email protected] | 01543 571280
Why Add�eld?
Add�eld IntelligentController
Combustion SystemThe burner system comprises of fully automaticpackage burners, these burners come completewith the following features:• Flame failure controls• Tronic ignition transformer• Integral fuel pump• Solenoid valves• Integral continuous air fan• Fuel sensors
Waste Loading and De-AshingThe SB-AB series of cremators are designed witha duel loading options.
Side Loading:Equipped with two side loading doors, eachchamber can be used independently as a partitioning wall separates the two spaces. Side loading is ideal for smaller animals. Animals can be placed in specially designed trays to simplifyash removal and ensure ash segregation. An important safety features is the door cut-o� switches that immediately turn o� the burners when these doors are opened.
Top Loading:Animals can also be loaded through the top access lid. The partitioning stud wall can be removed opening up the machine for larger animals and mass cremations of up to 400kg
At the end of every incineration process it isrecommended the ash should be removedprior to the next incineration cycle.
Key Features:• Plug and play design for easy & efficient replacement.• Zone ramp sequence three zone controller• Incoming and outgoing cable terminations• Burner control gear• Interface relays and contactors• Temperature indication and control of the primary chamber• Temperature indication and control of the secondary chamber• Plant status indicators• Cycle status indicators• Fault status indicators• Operator interface.
SB-AB 400Kg Load CapacityDuel Loading Pet Cremator
MP-100 INCINERATOR
GENERAL ARRANGEMENT OFSB-AB PET CREMATOR
SB-ABRLC
Unit 17 Hollies Park Cannock
drawn:-
scale:- Not to scale
title
drg. no. rev.
date:-
daterev. description
SB-AB Cremator
150mm concrete baseFLOOR PLAN
4300
3300
Control Panel11
00
3270
PLAN VIEW
Top loading lid
1200
2660
450
Chimney Cap500
800
2286
Front loading doors650
535
Chimney Sections*Can be made longer
ISOMETRIC VIEW17
5