Pet relocation, export pets services, pet travel specialists, pet travel scheme uk
PET-0813_tcm4-519733
Transcript of PET-0813_tcm4-519733
-
8/11/2019 PET-0813_tcm4-519733
1/2
DNV SOFTWARE - A LEADING PROVIDER OF SOFTWARE FOR MANAGING RISK
safeguarding life, property and the environment
SesamTMPipelinePipeline Engineering Tool
DNV-OS-F101 Design Checks
- Burst during operation and system pressure test
- Collapse
- Propagation buckling
- Load combination, load controlled, load combinations a and b
- Load combination, displacement controlled, load
combinations a and b
Weight and Volume
- Calculates volume mass and dry weight of the
components that constitute a pipeline, i.e. steel, coating
layers and content
- Volume, mass and dry weight are calculated individu
ally and totally, per metre pipeline and totally for a given
length of the pipeline
End Expansion during operation and system pressure test
Upheaval Buckling- Safety level for given input
- Temperature, internal pressure and imperfection height that
will trigger upheaval buckling
- Cover Height to prevent upheaval buckling for a given safety level
- Simple and approximate
On-Bottom Stability
- Safety level for a given input
- Weight coating required to ensure stability for a given safety level
- Steel wall thickness required to ensure stability for a given
safety level
- Calculations according to DNV-RP-E305
Fatigue Screening
- Critical span length according to VIV on-set screening
criterion in DNV-RP-105
- In-line and Cross-flow
Reel Straining
- Max strain and ovality on reel
- Design check according to DNV-OS-F101
- Accumulated plastic strain
Reel Packing
- Amount of pipe on given reel according to, volume restriction
and weight restriction
The Pipeline Engineering Tool is a calculation tool for early phase pipeline assessment covering different
aspects of pipeline design. The tool is a VBA (Visual Basic for Applications) based program with a user-
friendly interface.
-
8/11/2019 PET-0813_tcm4-519733
2/2
DET NORSKE VERITAS AS
NO-1322 Hvik, Norway
Contact us on:
web: www.dnvsoftware.comemail: [email protected]
DNV Software is a leading provider of software for managing risk in the energy, process and maritime industries offering solutions for design, engineering,strength assessment, risk and reliability, QHSE and asset integrity management. DNV Software is part of DNV and almost 300 DNV offices in 100 countriesenable us to be close to our customers and share best practices and quality standards throughout the world.
J-Lay
- Top tension
- Curvature and moment in sag bend including utilisation ratio
according to DNV-OS-F101
- Distance from touch down to barge
- Length of pipe in the free span
- Minimum horizontal lay radius
- Catenary calculations
S-Lay
- Top tension
- Strain on stinger including utilisation ratio according to
DNV-OS-F101
- Curvature and moment in sag bend including utilisation ratio
according to DNV-OS-F101
- Distance from touch down to barge
- Length of pipe in the free span
- Minimum horizontal lay radius- Catenary calculations
Cathodic Protection
- Calculated anode requirement according to DNV-RP-F103
ensures:
- sufficient anode material to cover mean loss throughout the
design life
- sufficient current at the end of the design life for de-polarisation
- maximum spacing
Complete solutions Most user friendly Most value for money Professional service