Pertemuan Ke-1. Pokok Bahasan Pengantar Reliabiality dan Maintainability. Failure Distribution...
-
Upload
calvin-may -
Category
Documents
-
view
218 -
download
1
Transcript of Pertemuan Ke-1. Pokok Bahasan Pengantar Reliabiality dan Maintainability. Failure Distribution...
Pokok Bahasan
• Pengantar Reliabiality dan Maintainability.
• Failure Distribution• Constant Failure Rate• Time Dependent Failure Models
• Reliability of System• State Dependent System• Physical Models• Realiability Design• Maintainability• Maintainability Design
• Availability• Empirical Methods• Reliability Testing• Growth Testing• Software Reliability
Referensi• E.Ebeling, Charles.” Introduction to Relaibility and Maintainability Engineering”. 2nd Edition, 2009. McGrawHill Internasional,
• Xie, Min et al. “Computing Reliability System”. Kluwer Academic Publisher, 2004.
• Etc
Study of Reliability and Maintainability
Reliability and Maintainability
System Complexit
y
Public Awareness
Insistence on ptoduct
quality
Product Liability
others
Why Reliability and Maintainability ?
Life cycle costing
Cost benefit analysis
Operational capability study
Refair and facility resourcing
Inventory and spare parts requirement determinations
Replacement decisions
others
Random vs Deterministic
“Deterministic is complete information or under certainty condition”
“Random is uncomplete information or under uncertainty cinditon”
Term and Defintion• Reliability is defined to be the probability that a component or system will perform a required function for a given period of time when used under stated operating conditions.
Design Load
EnvironmentOperating Conditions
Term and Definition• Maintainability is defined to be the probability that a failed component or system will be restored or repaired to a specified condition within a period of time when maintenance is performed in accordance with prescribed procedures.
Skill level
Maintenance program
Maintenance resources
Term and Definition• Availability is defined as the probability that a component or system is performing its required function at a given point in time when used under stated operating conditions.
Reliability vs Quality• Reliability is closely associated with the quality of a product and is often considered a subset of quality.
• Quality can be defined qualitatively as th amount by which the product satifies the user’s requirements.
• Product quality is in part a function of design and conformance to design specifications.
• On the other hand, reliability is concerned with how long the product continues to function once it becomes operational.
Random Event• In relaibility engineering a failure can be described as a random event.
• A random event E will occur with some probability denoted by P(E).
• The collection of all possible outcomes (events) relative to a random process is called space S, where S = {E1, E2,….EK}
P (E) + P(Ec) =1
Random EventExample : Let the event A = the failure of component 1 and B = the failure of component 2.Then: …
Random Event• Two events A and B mutually exclusive if the occurrence of one precludes the occurrence of the other.
• Two events A and B independent if and only if
• If two events are not independent, the probability of their intersection must be defined using conditional probability.
Random Variables• Random variable is a variable that takes on numerical values in accordance with some probability distribution.
• Random variable may be either continuous or discrete.
• The probability distribution that assigns a probability to each value of a discrete random variable or assign a probability to an interval of values of a continous random variable can be describe in term of PMF in discrete case and PDF in continous case.