PERSONAL INFORMATION Alexandros Sotirios ANIFANTIS

of 15 /15
Curriculum Vitae Alexandros Sotirios Anifantis © European Union, 2002-2018 | europass.cedefop.europa.eu Page 1 / 15 PERSONAL INFORMATION Alexandros Sotirios ANIFANTIS 91/A, via Sigismondo Castromediano, Bari, 70126, Italy 0805443018 +39 3936281386 [email protected] https://www.uniba.it/docenti/anifantis-alexandros-sotirios Skype: alexandros.anifantis Sex Male | Date of birth 02/02/1980 | Nationality Italian SCIENTIFIC ACTIVITY INTERNATIONAL SCIENTIFIC INDEXING (ISI) SCOPUS Author details Documents by author 30 Total citations 213 h-index 9 WORK POSITION Academic scientific research (fixed-term) (scientific-disciplinary sector AGR/09 "Agricultural Mechanics") at the Department Agricultural and Environmental Science (DISAAT) of the University of Bari Aldo Moro. The scientific activity concerned mainly research topics pertinent to Mechanics applied to the agricultural and agro-industrial sector, such as: - Renewable energy, power systems, energy management in agricultural sectors. Key skills include photovoltaic, geothermal and hydrogen power plants design, cogeneration sizing, thermo-optimization and energy efficiency analysis; - Use of sprayer machines; - Precision agriculture. Key skills include close range photogrammetry from UAV, Object- Based Image Analysis (OBIA) technique and multispectral imaging acquisition and computation in agriculture; - Pruning and mechanical harvesting in traditional and high-density olive groves; - Analysis of the impact caused by the overturning of agricultural tractors with numerical techniques. Publications ISI 1) PARLAVECCHIA, M., PASCUZZI, S., ANIFANTIS, A. S., FRANCESCO SANTORO, F., RUGGIERO, G. (2019) “Use of GIS to evaluate minor rural buildings distribution compared to the communication routes in a part of the Apulian territory (Southern Italy)”. Sustainability, 11, 17; EISSN 2071-1050. doi:10.3390/su11174700 (ScopusID: 2-s2.0-85071967263). 2) BULGAKOV, V., PASCUZZI, S., ANIFANTIS, A. S., SANTORO, F. (2019). “Oscillations analysis of front- mounted beet topper machine for biomass harvesting”. Energies, 12(14), 2774; ISSN 1996-1073. doi:10.3390/en12142774 (ScopusID: 2-s2.0-85069617952). 3) PRZYWARA, A., KACHEL, M., KOSZEL, M., LESZCZYŃSKI, N., KRASZKIEWICZ, A., ANIFANTIS, A. S. (2019) . “The influence of digestate on the static strength of spring rapeseeds (brassica napus var. arvensis)”. Sustainability (Switzerland), 11(7), 2133; ISSN: 2071-1050. doi:10.3390/su11072133 (ScopusID: 2-s2.0-85068340991) (WOS:000466551600310). 4) GUERRIERI A. S., ANIFANTIS A. S., SANTORO F., PASCUZZI S. (2019) “Study of a Large Square Baler with Innovative Technological Systems that Optimize the Baling Effectiveness”. Agriculture (Switzerland). Volume 9(5), 86 eISSN:2077-0472 DOI: 10.3390/agriculture9050086 (ScopusID: 2-s2.0-85067872624). 5) SANTORO F., ANIFANTIS A. S., RUGGIERO G., ZAVADSKY V., PASCUZZI S. (2019). Lightning Protection Systems Suitable for Stables: A Case Study. Agriculture (Switzerland), vol. 9(4), 72 eISSN:2077-0472 DOI: 10.3390/agriculture9040072 (ScopusID: 2-s2.0- 85066833094). 6) ZAVADSKIY V., ANIFANTIS A. S., SANTORO F. (2019). Solving of renewable energy sources usable potential evaluation in remote rural area on example of Basilicata region (Southern Italy) - Case study. Engineering for Rural Development, vol. 18, pp. 1401-1407. ISSN:1691-5976 - DOI:

Embed Size (px)

Transcript of PERSONAL INFORMATION Alexandros Sotirios ANIFANTIS

Europass CV© European Union, 2002-2018 | europass.cedefop.europa.eu Page 1 / 15
PERSONAL INFORMATION Alexandros Sotirios ANIFANTIS
91/A, via Sigismondo Castromediano, Bari, 70126, Italy
0805443018 +39 3936281386
SCIENTIFIC ACTIVITY
Academic scientific research (fixed-term) (scientific-disciplinary sector AGR/09 "Agricultural Mechanics") at the Department Agricultural and Environmental Science (DISAAT) of the University of Bari “Aldo Moro”. The scientific activity concerned mainly research topics pertinent to Mechanics applied to the agricultural and agro-industrial sector, such as: - Renewable energy, power systems, energy management in agricultural sectors. Key skills include photovoltaic, geothermal and hydrogen power plants design, cogeneration sizing, thermo-optimization and energy efficiency analysis; - Use of sprayer machines; - Precision agriculture. Key skills include close range photogrammetry from UAV, Object- Based Image Analysis (OBIA) technique and multispectral imaging acquisition and computation in agriculture; - Pruning and mechanical harvesting in traditional and high-density olive groves; - Analysis of the impact caused by the overturning of agricultural tractors with numerical techniques.
Publications ISI 1) PARLAVECCHIA, M., PASCUZZI, S., ANIFANTIS, A. S., FRANCESCO SANTORO, F., RUGGIERO, G. (2019) “Use of GIS to evaluate minor rural buildings distribution compared to the communication routes in a part of the Apulian territory (Southern Italy)”. Sustainability, 11, 17; EISSN 2071-1050. doi:10.3390/su11174700 (ScopusID: 2-s2.0-85071967263).
2) BULGAKOV, V., PASCUZZI, S., ANIFANTIS, A. S., SANTORO, F. (2019). “Oscillations analysis of front-mounted beet topper machine for biomass harvesting”. Energies, 12(14), 2774; ISSN 1996-1073. doi:10.3390/en12142774 (ScopusID: 2-s2.0-85069617952).
3) PRZYWARA, A., KACHEL, M., KOSZEL, M., LESZCZYSKI, N., KRASZKIEWICZ, A., ANIFANTIS, A. S. (2019). “The influence of digestate on the static strength of spring rapeseeds (brassica napus var. arvensis)”. Sustainability (Switzerland), 11(7), 2133; ISSN: 2071-1050. doi:10.3390/su11072133 (ScopusID: 2-s2.0-85068340991) (WOS:000466551600310).
4) GUERRIERI A. S., ANIFANTIS A. S., SANTORO F., PASCUZZI S. (2019) “Study of a Large Square Baler with Innovative Technological Systems that Optimize the Baling Effectiveness”. Agriculture (Switzerland). Volume 9(5), 86 – eISSN:2077-0472 – DOI: 10.3390/agriculture9050086 (ScopusID: 2-s2.0-85067872624).
5) SANTORO F., ANIFANTIS A. S., RUGGIERO G., ZAVADSKY V., PASCUZZI S. (2019). Lightning Protection Systems Suitable for Stables: A Case Study. Agriculture (Switzerland), vol. 9(4), 72 – eISSN:2077-0472 – DOI: 10.3390/agriculture9040072 (ScopusID: 2-s2.0- 85066833094).
6) ZAVADSKIY V., ANIFANTIS A. S., SANTORO F. (2019). Solving of renewable energy sources usable potential evaluation in remote rural area on example of Basilicata region (Southern Italy) - Case study. Engineering for Rural Development, vol. 18, pp. 1401-1407. ISSN:1691-5976 - DOI:
10.22616/ERDev2019.18.N138 (ScopusID: 2-s2.0-85067094893).
7) BULGAKOV V., IVANOVS S., SANTORO F., ANIFANTIS A.S. (2019). Experimental investigation of the energy-power characteristics of the cleaner of the root crop heads from the haulm. Engineering for Rural Development, vol. 18, pp. 129-135. ISSN:1691-5976 - DOI: 10.22616/ERDev2019.18.N167 (ScopusID: 2-s2.0-85067126426).
8) PASCUZZI S., SANTORO F., ANIFANTIS A.S., CIMINO V. (2019). “Correlation analysis between vegetation index (NDVI) and canopy coverage (TOC) based on remote sensing by using UAV”. Engineering for Rural Development, vol. 18, pp 214-220. ISSN:1691-5976 - DOI: 10.22616/ERDev2019.18.N290 (ScopusID: 2-s2.0-85067092039).
9) BULGAKOV V., PASCUZZI S., NIKOLAENKO S., SANTORO F., ANIFANTIS A.S., OLT J. (2019) “Theoretical study on sieving of potato heap elements in spiral separator”. Agronomy Research 17(1), vol. 33-48 - ISSN 1406-894X – DOI: 10.15159/AR.19.073 (ScopusID: 2-s2.0- 85067396482).
10) ANIFANTIS A.S., LORENCOWICZ E., PRZYWARA A., PASCUZZI S., RUGGIERO G., SANTORO F. (2019) “Common greenhouse conditioning plants compared with versatile geothermal system in Ames, Iowa”. Engineering for Rural Development, vol. 18, pp. 1325-1330. Jelgava, Latvia, May 22-24, 2019 - ISSN:1691-5976 - DOI: 10.22616/ERDev2019.18.N028 (ScopusID: 2-s2.0-85067116955).
11) BULGAKOV V., PASCUZZI S., ARAK M., SANTORO F., ANIFANTIS A.S., IHNATIEV Y., OLT J. (2019) “An experimental investigation of performance levels in a new root crown cleaner”. Agronomy Research, vol. 17(2), pp. 358-370 - ISSN 1406-894X – DOI: 10.15159/AR.19.132 (ScopusID: 2-s2.0-85067397408).
12) BULGAKOV V., PASCUZZI S., SANTORO F., ANIFANTIS A. S. (2018). Mathematical Model of the Plane-Parallel Movement of the Self-Propelled Root-Harvesting Machine. Sustainability (Switzerland), vol. 10(10), 3614; DOI:10.3390/su10103614 (ScopusID: 2-s2.0-85054738874).
13) ANIFANTIS A. S., COLANTONI A., PASCUZZI S., SANTORO F. (2018). Photovoltaic and hydrogen plant integrated with a gas heat pump for greenhouse heating: A mathematical study. Sustainability (Switzerland), vol. 10(2), 378, pp. 378-389. doi:10.3390/su10020378 (ScopusID: 2-s2.0-85041453767).
14) ANIFANTIS A. S., PASCUZZI S., SANTORO F. (2018). Performance comparison between fuel cell coupled with geothermal source heat pump and geothermal source gas engine heat pump system for greenhouse heating: a mathematical study. Engineering for Rural Development, vol. 17, pp. 1692-1697, ISSN 1691-5976. DOI:10.22616/ERDev2018.17.N157 (ScopusID: 2-s2.0- 85048980769).
15) SANTORO F., LORENCOWICZ E., ANIFANTIS A. S., PASCUZZI S. (2018). Stability analysis of platforms for picking fruit according to forthcoming standard en 16952: a case study. Engineering for Rural Development, vol. 17, pp. 83-89, ISSN 1691-5976. DOI:10.22616/ERDev2018.17.N110 (ScopusID: 2-s2.0-85048983674).
16) ANIFANTIS A. S., PRZYWARA A., PASCUZZI S., SANTORO F. (2018). Performance of photovoltaic and ground source heat pump system for daytime cooling of mushroom greenhouse during summer: preliminary analysis. Engineering for Rural Development, vol. 17, pp. 1684-1691, ISSN 1691-5976. DOI:10.22616/ERDev2018.17.N142 (ScopusID: 2-s2.0- 85048983653).
17) KOSZEL M., PRZYWARA A., SANTORO F., ANIFANTIS A. S. (2018). Evaluation of use of biogas plant digestate as fertilizer in alfalfa and winter wheat. Engineering for Rural Development, vol. 17, pp. 1413-1418, ISSN 1691-5976. DOI:10.22616/ERDev2018.17.N184 (ScopusID: 2-s2.0-85048982767).
18) KOBUS Z., NADULSKI R., ANIFANTIS A. S., SANTORO F. (2018). Effect of press construction on yield of pressing and selected quality characteristics of apple juice. Engineering for Rural Development, vol. 17, pp. 652-657, ISSN 1691-5976. http://www.tf.llu.lv/conference/proceedings2018/. DOI:10.22616/ERDev2018.17.N306 (ScopusID: 2-s2.0-85048977410).
19) PRZYWARA A., KOSZEL M., SANTORO F., ANIFANTIS A. S. (2018). Comparison of selected physical parameters of rapeseed cultivars. Engineering for Rural Development, vol. 17, pp. 1354-1359, ISSN 1691-5976. http://www.tf.llu.lv/conference/proceedings2018/. DOI:10.22616/ERDev2018.17.N138 (ScopusID: 2-s2.0-85048957882).
20) PASCUZZI S., ANIFANTIS A. S., CIMINO V., SANTORO F. (2018). Unmanned aerial vehicle used for remote sensing on an Apulian farm in southern Italy. Engineering for Rural Development, vol. 17, pp. 149-154, ISSN 1691-5976. DOI:10.22616/ERDev2018.17.N175 (ScopusID: 2-s2.0-85048950521).
21) ANIFANTIS A. S., COLANTONI A., PASCUZZI S. (2017). Thermal energy assessment of a small scale photovoltaic, hydrogen and geothermal stand-alone system for greenhouse heating. Renewable Energy, vol. 103, pp. 115-127. DOI:10.1016/j.renene.2016.11.031 (ScopusID: 2- s2.0-84995899642).
© European Union, 2002-2018 | europass.cedefop.europa.eu Page 3 / 15
22) ANIFANTIS A. S. (2017). Performance assessment of photovoltaic, ground source heat pump and hydrogen heat generator in a stand-alone systems for greenhouse heating. Chemical Engineering Transactions, vol. 58, pp. 511-516, DOI:10.3303/CET1758086 (ScopusID:2-s2.0- 85026389376).
23) RUSSO G., VERDIANI G., ANIFANTIS A. S. (2016). Re-Use of Agricultural Biomass for Nurseries Using Proximity Composting. Contemporary Engineering Sciences, Vol. 9(24), pp. 1151–1182. DOI:10.12988/ces.2016.68135 (ScopusID: 2-s2.0-85010304552).
24) PASCUZZI S., ANIFANTIS A. S., BLANCO I., SCARASCIA MUGNOZZA G. (2016). Electrolyzer performance analysis of an integrated hydrogen power system for greenhouse heating a case study. Sustainability (Switzerland), vol. 8(7), 629, pp. 1-15; DOI:10.3390/su8070629 (ScopusID: 2-s2.0-84982706009).
25) ANIFANTIS A. S., PASCUZZI S., SCARASCIA MUGNOZZA, G. (2016). Geothermal source heat pump performance for a greenhouse heating system. An experimental study. Journal of Agricultural Engineering, vol. 47(3), 544, pp. 164-170. DOI:10.4081/jae.2016.544 (ScopusID: 2- s2.0-84990966946).
26) PASCUZZI S., BLANCO I., ANIFANTIS A. S., SCARASCIA MUGNOZZA G. (2016). Hazards assessment and technical actions due to the production of pressured hydrogen within a pilot photovoltaic-electrolyzer-fuel cell power system for agricultural equipment. Journal of Agricultural Engineering 2016. Volume 47(2), pp. 88-93, pISSN 1974-7071 | eISSN 2239-6268; DOI:10.4081/jae.2016.507 (ScopusID: 2-s2.0-84974822779)
27) BLANCO I., PASCUZZI S., ANIFANTIS A. S., SCARASCIA MUGNOZZA G. (2014) Study of a pilot photovoltaic-electrolyzer-fuel cell power system for a geothermal heat pump heated greenhouse and evaluation of the electrolyzer efficiency and operational mode. Journal of Agricultural Engineering 2014; volume 45(3), pp. 111-118, pISSN 1974-7071 | eISSN 2239- 6268; DOI:10.4081/jae.2014.238 (ScopusID: 2-s2.0-84908576530).
28) RUSSO G., ANIFANTIS A. S., VERDIANI G., SCARASCIA MUGNOZZA G. (2014). Environmental analysis of geothermal heat pump and LPG greenhouse heating systems. BIOSYSTEMS ENGINEERING, vol. 127, pp. 11-23, ISSN: 1537-5110. DOI: 10.1016/j.biosystemseng.2014.08.002 (ScopusID: 2-s2.0-84906735097).
29) BLANCO I., ANIFANTIS A. S., PASCUZZI S., SCARASCIA MUGNOZZA G. (2013). Hydrogen and renewable energy sources integrated system for greenhouse heating. JOURNAL OF AGRICULTURAL ENGINEERING, vol. 44, e45, p. 226-230, (PAVIA:PAGEPress Publications, ISSN: 1974-7071, Viterbo, Italy, 8-12/09/2013). DOI: 10.4081/jae.2013.287 (ScopusID: 2-s2.0- 84937576347).
30) ANIFANTIS, A., CANZIO, G., CRISTIANO, G., DE LUCIA, B., RUSSO, G., VECCHIETTI, L., IMMIRZI, B., MALINCONICO, M. AND SANTAGATA G. (2012). Influence of the Use of Drip Irrigation Systems and Different Mulching Materials on Ornamental Sunflowers in Greenhouse Cultivation. ACTA HORTICULTURAE, vol. 952; p. 385-392, ISSN: 0567-7572. DOI: 10.17660/ActaHortic.2012.952.48 (ScopusID: 2-s2.0-84863700751).
31) VOX G., SCHETTINI E., LISI CERVONE A. AND ANIFANTIS A. (2008). Solar thermal collectors for greenhouse heating. ACTA HORTICULTURAE, vol. 801(PART 1); p. 787-794, ISSN: 0567- 7572. DOI: 10.17660/ActaHortic.2008.801.92 (ScopusID: 2-s2.0-71449103292).
Publications from national and international conference
32) ANIFANTIS A. S., SANTORO F., PASCUZZI S., SCARASCIA MUGNOZZA G. (2017). Stand- Alone Photovoltaic and Hydrogen Plant Coupled with A Gas Heat Pump For Greenhouse Heating. Proceedings of the IX International Scientific Symposium "Farm Machinery and Process Management in Sustainable Agriculture", Lublin, Poland, 22-24.11.2017, p. 41-45. ISBN 978-83-937433-2-2. http://www.kemiz.up.lublin.pl/ https://depot.ceon.pl/handle/123456789/14841
33) ANIFANTIS A. S., PASCUZZI S., SANTORO F. (2017). Vineyard Treatments Performed With A Recycling Tunnel Sprayers Prototype: Preliminary Assessment. Proceedings of the IX International Scientific Symposium "Farm Machinery and Process Management in Sustainable Agriculture", Lublin, Poland, 22-24.11.2017, p. 37-40. ISBN 978-83-937433-2-2. http://www.kemiz.up.lublin.pl/
34) ANIFANTIS A. S., PASCUZZI S., SANTORO F. (2017). Osh Risk Evaluation Within Agro- Industrial Plants: The Case Of An Olive Mill. Proceedings of the IX International Scientific Symposium "Farm Machinery and Process Management in Sustainable Agriculture", Lublin, Poland, 22-24.11.2017, p. 32-36. ISBN 978-83-937433-2-2. http://www.kemiz.up.lublin.pl/
35) ANIFANTIS A. S. (2017). Gas heat pump for greenhouse heating in a stand-alone hydrogen plant: a mathematical study. Proceedings of the XI International Conference "Biosystems engineering addressing the human challenges of the 21st century”, 11th International AIIA Conference: July 5-8, 2017 Bari - Italy, p. 139-142. ISBN 978-88-6629-020-9. http://www.aiia2017.it
Curriculum Vitae Replace with First name(s) Surname(s)
© European Union, 2002-2018 | europass.cedefop.europa.eu Page 4 / 15
36) ANIFANTIS A. S., PASCUZZI S., SANTORO F. (2016). Energy efficiency analysis of a hydrogen and geothermal stand-alone system for greenhouses heating. Abstract Book of Journal of Agricultural Engineering 2016, “Mechanization and new technologies for the control and sustainability of agricultural and forestry systems”. Alghero, Italy, May 29 – June 1, 2016; volume XLVII No s1, pISSN 1974-7071 | eISSN 2239-6268; DOI: 10.4081/jae.2016.567; page 24.
37) ANIFANTIS A. S., PASCUZZI S., SANTORO F. (2016). Low frequency electromagnetic fields: risk assessment in an olive mill. Abstract Book of Journal of Agricultural Engineering 2016, “Mechanization and new technologies for the control and sustainability of agricultural and forestry systems”. Alghero, Italy, May 29 – June 1, 2016; volume XLVII No s1, pISSN 1974-7071 | eISSN 2239-6268; DOI: 10.4081/jae.2016.567; page 23.
38) ANIFANTIS A. S., PASCUZZI S., SANTORO F. (2016). Evaluation of a towed over-the-row harvester for super high-density olive groves. Abstract Book of Journal of Agricultural Engineering 2016, “Mechanization and new technologies for the control and sustainability of agricultural and forestry systems”. Alghero, Italy, May 29 – June 1, 2016; volume XLVII No s1, pISSN 1974-7071 | eISSN 2239-6268; DOI: 10.4081/jae.2016.567; page 7.
39) ANIFANTIS A. S., BIANCHI, B., PASCUZZI S., SANTORO F. (2016). Evaluation of a recycling tunnel sprayers prototype for vineyard treatments in Salento-Apulia. Abstract Book of Journal of Agricultural Engineering 2016, “Mechanization and new technologies for the control and sustainability of agricultural and forestry systems”. Alghero, Italy, May 29 – June 1, 2016; volume XLVII No s1, pISSN 1974-7071 | eISSN 2239-6268; DOI: 10.4081/jae.2016.567; page 6.
40) ANIFANTIS A. S., PASCUZZI S., SANTORO F. (2016). Energy efficiency analysis of a hydrogen and geothermal stand-alone system for greenhouses heating. Atti della Conferenza MECHTECH 2016 “Mechanization and new technologies for the control and sustainability of agricultural and forestry systems”. Alghero, Italy, May 29 – June 1, 2016, pages 200-203; ISBN 979-12-200-1098-6; www.mechtech2016.uniss.it
41) ANIFANTIS A. S., PASCUZZI S., SANTORO F. (2016). Low frequency electromagnetic fields: risk assessment in an olive mill. Atti della Conferenza MECHTECH 2016 “Mechanization and new technologies for the control and sustainability of agricultural and forestry systems”. Alghero, Italy, May 29 – June 1, 2016, pages 194-198; ISBN 979-12-200-1098-6; www.mechtech2016.uniss.it
42) ANIFANTIS A. S., PASCUZZI S., SANTORO F. (2016). Evaluation of a tow-behind harvesters for super-intensive olive groves. Atti della Conferenza MECHTECH 2016 “Mechanization and new technologies for the control and sustainability of agricultural and forestry systems”. Alghero, Italy, May 29 – June 1, 2016, pages 51-55; ISBN 979-12-200-1098-6; www.mechtech2016.uniss.it
43) ANIFANTIS A. S., BIANCHI, B., PASCUZZI S., SANTORO F. (2016). Evaluation of a recycling tunnel sprayers prototype for vineyard treatments in Salento-Apulia. Atti della Conferenza MECHTECH 2016 “Mechanization and new technologies for the control and sustainability of agricultural and forestry systems”. Alghero, Italy, May 29 – June 1, 2016, pages 46-50; ISBN 979-12-200-1098-6; www.mechtech2016.uniss.it
44) PASCUZZI S., ANIFANTIS A. S. (2016). La revisione delle trattrici e delle macchine agricole. AGRIFOGLIO, n.55; p. 24-25, ISSN: 2421-3268
45) PASCUZZI S., BLANCO I., ANIFANTIS A. S., SCARASCIA MUGNOZZA G. (2015). Risks linked to the management of pressured hydrogen within a photovoltaic-electrolyzer-fuel cell power system located on a rural land. Atti dell’International Conference Ragusa SHWA “Safety Health and Welfare in Agriculture Agro-food and Forestry Systems”. Lodi – Italy, September 8-11, 2015. Proceedings International Conference Ragusa SHWA “Safety Health and Welfare in Agriculture Agro-food and Forestry Systems”, pages 261-264; ISBN 978-88-941207-0-7; http://hdl.handle.net/11586/143091
46) SCARASCIA MUGNOZZA, G., PASCUZZI, S., RUSSO, G., ANIFANTIS, A. AND VERDIANI, G. (2013). Impianto sperimentale geotermico a bassa entalpia per riscaldamento serricolo. Valutazioni ambientali. Atti del Convegno Nazionale dell’Associazione Italiana di Ingegneria Agraria AIIA. Firenze, 20-22 settembre 2012. Vol. 96. 8 pagine; ISBN 978-88-6655-394-6 http://www.fupress.com/archivio/pdf/2459_5960.pdf
47) SCARASCIA MUGNOZZA, G., PASCUZZI, S., ANIFANTIS, A. AND VERDIANI, G. (2012). Use of low-entalpy geothermal resources for greenhouse heating: an experimental study. Acta Scientiarum Polonorum, Technica Agraria, vol. 11(1-2), p. 13-19, ISSN: 1644-0684 http://www.acta.media.pl/pl/main.php?p=8&sub=0&act=10&s=6&no=351&lang=en
48) SCARASCIA MUGNOZZA G., PICCINNI A.F., ANIFANTIS A., VERDIANI G. (2012). “Uso delle risorse geotermiche a bassa entalpia in agricoltura”. In XI Giornata Mondiale dell'Acqua. Atti del Convegno Nazionale “Acqua ed Energia”, 266 - Accademia Nazionale dei Lincei - Roma, 22 Marzo 2011. Atti dei Convegni Lincei 266 (ISSN 0391-805X), Bardi Editore srl, Roma, in stampa, ISBN:978-88-218-1053-4.
49) SCARASCIA MUGNOZZA, G., PASCUZZI, S., ANIFANTIS, A. AND VERDIANI G. (2011).
© European Union, 2002-2018 | europass.cedefop.europa.eu Page 5 / 15
Photovoltaic and geothermal integration system for greenhouse heating: an experimental study. Proceedings of the V International Scientific Symposium "Farm Machinery and Process Management in Sustainable Agriculture", Lublin, Poland, 23-24.11.2011, p. 135-138. ISBN 83- 922409-9-5. http://www.kemiz.up.lublin.pl/upload/file/Sympozjum2011/ProcLub2011.pdf
50) SCARASCIA MUGNOZZA, G., PASCUZZI, S. AND ANIFANTIS A. (2011). Impianto sperimentale geotermico a bassa entalpia per riscaldamento serricolo. Prime valutazioni. Atti del Convegno Nazionale dell’Associazione Italiana di Ingegneria Agraria AIIA. “Gestione e controllo dei sistemi agrari e forestali”, Belgirate (VB), 22-24 settembre 2011. 7 pagine; Memoria n.106. ISBN 978-88-906273-0-9. http://www.aiia.it/storico-convegni-aiia/119-area-costruzioni.html
51) SCARASCIA MUGNOZZA G. AND ANIFANTIS A. (2009). Dal fotovoltaico al termico. COLTURE PROTETTE, vol. 6; p. 40-43, ISSN: 0390-0444.
Reviewer of the following international journals
“Renewable energy”; “Energy”; “International Journal of Hydrogen Energy”; “SN Applied Sciences”; “Journal Applied Sciences”; “Sustainability”; “Sustainable Production and Consumption”; “Geothermics”.
Patents (results obtained in technology transfer in terms of
participation in the creation of new companies (spin off),
development, use and marketing of patents)
2019
Coinventor of the continuous potato collection and cleaning machine with Prof. Vladimir Bulgakov (UA); Prof. Vladimirovich Chief Ivan (UA); Prof. Zinoviy Ruzhilo (UA); Prof. Simone Pascuzzi (IT) and Dr. Francesco Santoro (IT). Invention n. 120234. Application filed on 07/09/2018. Application accepted on 25.10.2019, bul. 20. 1. The object of the invention: the device. 2. Field of application: agricultural machinery, in particular the separation of the working parts of the rooting machines. 3. The essence of the invention: the cleaning rollers, which are mounted on an additional inclined frame, are arranged in the shape of a wave in a longitudinal-vertical plane at different heights, so that formed, positioned longitudinally, cleaning beds helical screw springs are directed in a direction towards the cantilevered ends, and above the outlet ends of the helical springs, in front of the discharge conveyor, a transmission shaft is mounted perpendicularly to the longitudinal axes of the coils, with flat elastic beads located within the cleaning channels.
4. Technical result: improvement of the quality of the purification of root crops from impurities by 15- 20%.
Projects
research projects, eligible for funding on the basis of
competitive calls for peer review)
2018/2019: Participation in the research contract between Società Studi Components for vehicles S.p.A. –CVIT for the validation of the Deepfield monitoring system - Basic Soil (BOSCH) on fruit tree crops and Aldo Moro University of Bari. Scientific coordinator Prof. Giuseppe De Mastro. University of Bari "Aldo Moro" - Department of Agro-Environmental and Territorial Sciences.
2018/2019: Participation in the activities of the research group characterized by international collaborations, related to the project entitled: "Low cost water desalination and sensor technology compact module - DESERT", of which the scientific responsible is Prof. Salvatore Camposeo, funded under the WaterWorks2014 - H2020 program. The activity of Dr. Ing. Alexandros Sotirios Anifantis is aimed at the acquisition of primary data and images in the range of the multispectral and thermal by means of remotely piloted aircraft relative to the crops: Olive tree and almond tree.
2016-2018: Participation in the Research Project “INAIL Call for Collaboration Research (BRiC) - Plan for Research Activities 2016-2018 - Discretionary Research, prepared by the President with determination n. 469 of 21 December 2015, adopted by the Steering and Supervisory Board with Resolution no. 24 of December 29, 2015 and approved by the Ministry of Health, pursuant to article 14 of the D.P.R. December 4, 2002 No. 303, with note prot. n. GAB 0004369-P of 2 May 2016 "entitled:" Development of a Compact Agricultural Tractor for the Processing of Specialized Tree Crops (TRACLAS) ".
2015-2018: Scientific coordinator of the research project entitled: "Photovoltaic, hydrogen, solar thermal and geothermal integrated in a stand-alone system for the heating of greenhouses", admitted to financing under the regional intervention called FutureInResearch (BURP 160, 5 / 12/2013), based on a competitive tender that provides for peer review (Official Gazette of the Puglia Region No. 142 dated 9/10/2014, DETERMINATION OF THE MANAGER OF INDUSTRIAL RESEARCH AND INNOVATION 30 September 2014, No. 460. FSC 2007/2013 Intervention "FutureInResearch", AD No. 437/2013, CEO No. 66/2014 and CEO No. 381 of 3 July 2014. Approval of the list of proposals to be assigned to Universities and related Departments at the conclusion of the Phase 3. SSD AGR / 09 MECCANICA AGRARIA - code of practice TCE14D7). 09/16/2015 - 09/15/2018.
2016: Winner of the annual individual financing of basic research activities, MIUR: LAW 11 December 2016, n. 232, article 1, paragraphs 295-302.
Curriculum Vitae Replace with First name(s) Surname(s)
© European Union, 2002-2018 | europass.cedefop.europa.eu Page 6 / 15
2015: Participation in the research activities of the working group set up within the research project Fondo UNIBA ex 60% ES. FIN. 2015, entitled: "Remote sensing by drone in a farm in Puglia". As a Type A temporary researcher. Responsible: Prof. Ing. Simone Pascuzzi.
2014: Participation in the research activities of the working group set up within the research project Fondo UNIBA ex 60% ES. FIN. 2014, entitled: "Agronomic, Engineering and Technological Aspects of the Production of High Density Olive Oil". As a Type A temporary researcher. Responsible: Dr. Salvatore Camposeo.
2008-2013: Executive project winner: "Integrated production of energy from renewable sources in the regional agro-industrial system" in the framework of the "Scientific Research" Framework Program Agreement - II Supplementary Act - Public Notice "Networks of Public Research Laboratories", aimed at realization of an "integrated system for the production, accumulation and use of hydrogen from photovoltaic in the field of shutters".
2009: Participation in the activities of the international research group of Prof. Ramesh S. Kanwar. Interdisciplinary research training entitled: Geothermal Energy Systems for Greenhouses, carried out, as part of the research doctorate, at the Department of Agricultural and Biosystems Engineering, Iowa State University - Ames, U.S.A.
2009: Participation in the activities of the research group established within the research doctorate entitled: "Experimental technological solutions for the production of renewable energy in agriculture". Activity carried out at the Department of Agro Environmental and Territorial Sciences (Di.S.A.T.) of the University of Bari Aldo Moro. Tutor: Prof. Ing. Giacomo Scarascia Mugnozza.
2009: Direction and organization of the activities of an inter-doctoral research group entitled: "Alternative energy sources and vectors for sustainable development" within the Graduate School "Government of the Territory and Agroforestry Environment", as a PhD student of research. University of Bari Aldo Moro, Polytechnic of Bari.
2009: Participation in the research activities of the working group set up within the research project Fondo UNIBA ex 60% (2009), entitled "Coverage Systems for Crop Protection". As a PhD student. Responsible: Prof. Ing. Giacomo Scarascia Mugnozza.
2008: Participation in the research activities of the working group set up within the research project Fondo UNIBA ex 60% (2008), entitled: "Photoselective Materials for Crop Protection". As a PhD student. Responsible: Prof. Ing. Giacomo Scarascia Mugnozza.
2007: Participation in the research activities of the working group set up within the research project Fondo UNIBA ex 60% (2007), entitled: "Innovative permeable roofing systems: networks for protected crops". As a PhD student. Responsible: Prof. Ing. Giacomo Scarascia Mugnozza.
Conferences
in Italy or abroad)
Speaker at the ISHS GreenSys2011 International Symposium "Advanced Technologies & Management Towards Sustainable Greenhouse Ecosystems", Halkidiki, Greece, 5-10 June 2011, with presentation of communications: "Influence of the use of Drip Irrigation Systems and Different Mulching Materials on Ornamental Sunflowers in Greenhouse Cultivation ”(authors A. Anifantis, G. Canzio, G. Cristiano, B. De Lucia, G. Russo, L. Vecchietti, B. Immirzi, M. Malinconico and G. Santagata).
Speaker at the Green City Energy MED Forum invitation. Report entitled: "Pilot plant: geothermal heat pump system". Palazzo Ateneo and former Palazzo Poste of the University of Bari Aldo Moro. 12-13 / 11/2012 - Bari.
Speaker at the MECHTECH Conference "Mechanization and new technologies for the control and sustainability of agricultural and forestry systems". Report entitled: "Analysis of the energy efficiency of a photovoltaic, hydrogen and geothermal stand-alone system for the heating of windows". Alghero, Italy, May 29 - June 1, 2016.
Speaker at the XXXVII CIOSTA & CIGR Section V International Conference Conference: Research and Innovation for the Sustainable andsafe Management of Agricultural and Forestry Systems. Report entitled: "Performance assessment of photovoltaic, ground source heat pump and hydrogen heat generator in a stand-alone system for greenhouse heating". Palermo (Italy). 13-15 June 2017.
Speaker at the International conference "Biosystems engineering addressing the human challenges of the 21st century". Report entitled: "Gas heat pump for greenhouse heating in a stand-alone hydrogen plant: a mathematical study. Bari (Italy). 5-8 July 2017.
Member of the Organizing Committee of the 11th AIIA International conference "Biosystems
Curriculum Vitae Alexandros Sotirios Anifantis
© European Union, 2002-2018 | europass.cedefop.europa.eu Page 7 / 15
engineering addressing the human challenges of the 21st century" - Bari (Italy). 5-8 July 2017.
Speaker at the IX International Scientific Symposium "Farm Machinery and Process Management in Sustainable Agriculture". Report entitled: "Stand-Alone Photovoltaic And Hydrogen Plant Coupled With A Gas Heat Pump For Greenhouse Heating". Lublin, Poland, 22-24.11.2017.
Chairman of the T4 session of the IX International Scientific Symposium "Farm Machinery and Process Management in Sustainable Agriculture", Lublin, Poland, 22-24.11.2017.
Speaker at the 17th International Scientific Conference "Engineering for Rural Development". Headline reports: Performance of photovoltaic and ground source heat pump system for daytime cooling of mushroom greenhouse during summer: preliminary analysis ”and“ Performance comparison between fuel cell coupled with geothermal source heat pump and geothermal source gas engine heat pump system for greenhouse heating: a mathematical study ”. Jelgava, Latvia, 23- 25.05.2018.
Member of the Scientific Committee of the X International Scientific Symposium "Farm Machinery and Process Management in Sustainable Agriculture", Lublin, Poland, 20-22.11.2019.
Conferences
(participation)
GreenSys2007 ISHS International Symposium "High Technology for Greenhouse system Management", Naples, 4-6 October 2007, with presentation of communications: "Solar thermal collectors for greenhouse heating" (authors G. Vox, E. Schettini, A. Lisi Cervone, AS Anifantis).
International Congress MACPLAS'08 "Plastics & Agriculture", Bari, 21-24 February 2008.
Participation in the International Conference on Biosystems Engineering 2019 (BSE2019). Report entitled: "Theoretical study on sieving of potato heap elements in spiral separator". Estonian University of Life Sciences, Institute of Technology, Tartu, Estonia, May 8-10, 2019.
Memberships Membership of the “Associazione Italiana di Ingegneria Agraria” (AIIA).
Institutional Offices Membership of the AQ of the Degree Course in SCIENCES AND TECHNOLOGIES OF THE TERRITORY AND AGRO-FOREST ENVIRONMENT (STAAF) (L-25) (D.M.270 / 04). Department Agricultural and Environmental Science (DISAAT) of the University of Bari “Aldo Moro”.
Courses
(Frontal teaching - University of Bari "Aldo Moro")
2015/2016 3CFU: SSD AGR / 09, lecturer in the course "Machines for the distribution of phytosanitary products" (Module of the C.I. Applied Engineering), course of study in PLANT MEDICINE (D.M.270 / 04) (LM). 3CFU: SSD AGR / 09, lecturer in co-presence for exercise activities, teaching "Mechanics and agricultural mechanization", degree course in AGRICULTURAL SCIENCES AND TECHNOLOGIES (L-25). 2016/2017 3CFU: SSD AGR / 09, lecturer in the course "Machines for the distribution of phytosanitary products" (Module of the C.I. Applied Engineering), course of study in PLANT MEDICINE (D.M.270 / 04) (LM). 3CFU: SSD AGR / 09, lecturer in co-presence for exercise activities, teaching "Mechanics and agricultural mechanization", degree course in AGRICULTURAL SCIENCES AND TECHNOLOGIES (L-25). 2017/2018 3CFU: SSD AGR / 09, lecturer in the course "Machines for the distribution of phytosanitary products" (Module of the C.I. Applied Engineering), course of study in PLANT MEDICINE (D.M.270 / 04) (LM). 3CFU: SSD AGR / 09, lecturer in co-presence for exercise activities, teaching "Mechanics and agricultural mechanization", degree course in AGRICULTURAL SCIENCES AND TECHNOLOGIES (L-25). 2018/2019 3CFU: SSD AGR / 09, lecturer of the course: "Machines for the distribution of plant protection products" (Module of the C.I. Applied Engineering), course of study in PLANT MEDICINE (D.M.270 / 04) (LM). 6CFU: SSD AGR / 09, professor in charge of teaching: "Algebraic modelling of biosystems", degree course in SCIENCES AND TECHNOLOGIES OF THE TERRITORY AND AGRO-FOREST ENVIRONMENT (STAAF) (L-25) (DM270 / 04) (professor of reference for the degree course). 1CFU: SSD AGR / 09, lecturer of the course: "Teaching methods for agricultural mechanics (AGR09)" - Form for the recognition of 24 ECTS qualifying for teaching in the competition class A-51 (Sciences, technologies and techniques agricultural practices) for postgraduate graduates. 2019/2020
Curriculum Vitae Replace with First name(s) Surname(s)
© European Union, 2002-2018 | europass.cedefop.europa.eu Page 8 / 15
3CFU: SSD AGR / 09, lecturer of the course: "Machines for the distribution of plant protection products" (Module of the C.I. Applied Engineering), course of study in PLANT MEDICINE (D.M.270 / 04) (LM). 6CFU: SSD AGR / 09, professor in charge of teaching: "Algebraic modelling of biosystems", degree course in SCIENCES AND TECHNOLOGIES OF THE TERRITORY AND AGRO-FOREST ENVIRONMENT (STAAF) (L-25) (DM270 / 04) (professor of reference for the degree course). 1CFU: SSD AGR / 09, lecturer: "Teaching methods in agricultural mechanics" - [064262] - Form for the recognition of 24 ECTS qualifying for teaching in the competition class A-51, Course of Study (Ord.) Agro-Environmental and Territorial Sciences (DM270 / 04) (Ord. 2018), Common course and Course of Study (Ord.) Agricultural sciences, technologies and techniques (DM270 / 04) (Ord. 2011) for graduates Master's Degree, Management of the Rural Plant Production and Crop Protection System.
Seminars
(fellowships) to qualified foreign or supranational universities and
research institutes)
Regular basis on the topic: "Renewable Energy in agricultural sector", financed with a scholarship in the program of the Erasmus + Program 2015/2016 fellowship - Staff Mobility for Teaching Assignments (STA), carried out at the Department of Machinery Exploitation and Management of Production Process, University of Life Science in Lublin, Poland. 20-23 March 2017.
Regular basis on the topic: "Renewable Energy in agricultural sector", at the Department of Machinery Exploitation and Management of Production Process, University of Life Science in Lublin, Poland. 24/03/2017 to date.
Regular basis, from 08/09/2017 to 14/09/2017, at the Department of DiSAAT, University of Bari "Aldo Moro", as a teacher for the "ERASMUS PROGRAM + Staff Mobility for Training (STT)" in PhD students of the "Faculty of Production Engineering, University of Life Sciences in Lublin, Poland", for a series of lessons on the topics:
- 08/09/2017 "Using solar energy- techniques and opportunities", 6 hours, performed by the Researcher Alexandros Sotirios Anifantis;
-11/09/2017 "Solar energy usage - operational problems", 6 hours, performed by the Researcher Alexandros Sotirios Anifantis;
-13/09/2017 "Integrated RES - photovoltaic systems, hydrogen production", 6 hours, performed by the Researcher Alexandros Sotirios Anifantis;
-14/09/2017 "Environmental aspects of RES use - Environmental impact assessment", 2 hours, performed by the Researcher Alexandros Sotirios Anifantis;
for a total number of hours equal to 20.
Regular basis on the topic: "Renewable Energy in agricultural sector", financed with a scholarship in the program of the Erasmus Program + 2016/2017 fellowship - Staff Mobility for Teaching Assignments (STA), carried out at the Department of Machinery Exploitation and Management of Production Process, University of Life Science in Lublin, Poland. 21-24 November 2017.
Regular basis on the topic: "Renewable Energy in agricultural sector", financed with a scholarship in the program of the Erasmus + Program 2017/2018 fellowship - Staff Mobility for Teaching Assignments (STA), held at the Instituto Politécnico de Bragança, Bragança , Portugal, 14-18 May 2018.
Regular basis on the topic: "Renewable Energy in agricultural sector", financed with a scholarship in the program of the Erasmus Program + 2016/2017 fellowship - Staff Mobility for Teaching Assignments (STA), held at the Faculty of Engineering, Latvia University of Agriculture, Latvia, 23-28 May 2018.
Regular basis on the topic: "Sprayers and their sustainable employment", held at the Kazakh National Agrarian University (KazNAU), Almaty, Kazakhstan, 20-25 June 2018.
Regular basis on the topic: "Sprayers and their sustainable employment", held at the National Academy of Agrarian Science, NATIONAL SCIENTIFIC CENTER, "Institute of agricultural engineering and electrification", Kiev, Ukraine, 3-7 July, 2018.
Regular basis on the topic: "Renewable Energy in Agriculture", held at the Faculty of Engineering, Latvia University of Life Sciences and Technologies, Jelgava (Latvia), years 2017/2018 and 2018/2019.
Seminars
(fellowships) to qualified foreign or supranational universities and
research institutes)
Ciclo di lezioni sulla tematica: "Renewable Energy in agricultural sector", finanziati con borsa di studio nell'abito del Program Erasmus+ 2015/2016 fellowship - Staff Mobility for Teaching Assignments (STA), svolta presso il Department of Machinery Exploitation and Management of Production Process, University of Life Science in Lublin, Poland. 20-23 marzo 2017.
Incarico di insegnamento per un ciclo di lezioni sulla tematica: "Renewable Energy in agricultural sector", presso il Department of Machinery Exploitation and Management of Production Process, University of Life Science in Lublin, Poland. 24/03/2017 ad oggi.
Incarico di insegnamento svolto, dal 08/09/2017 al 14/09/2017, presso il Dipartimento DiSAAT, Università degli Studi di Bari “Aldo Moro”, come docente per il “PROGRAM ERASMUS+ Staff
Curriculum Vitae Alexandros Sotirios Anifantis
© European Union, 2002-2018 | europass.cedefop.europa.eu Page 9 / 15
WORK EXPERIENCE
Mobility for Training (STT)” a Dottorandi di Ricerca (PhD) della “Faculty of Production Engineering, University of Life Sciences in Lublin, Poland”, per un ciclo di lezioni sulle tematiche:
-08/09/2017 “Using solar energy- techniques and opportunities”, 6 hours, performed by the Researcher Alexandros Sotirios Anifantis;
-11/09/2017 “Solar energy usage – operational problems”, 6 hours, performed by the Researcher Alexandros Sotirios Anifantis;
-13/09/2017 “Integrated RES – photovoltaic systems, hydrogen production”, 6 hours, performed by the Researcher Alexandros Sotirios Anifantis;
-14/09/2017 “Environmental aspects of RES use – Environmental impact assessment”, 2 hours, performed by the Researcher Alexandros Sotirios Anifantis;
per un numero totale di ore pari a 20.
Ciclo di lezioni sulla tematica: "Renewable Energy in agricultural sector", finanziati con borsa di studio nell'abito del Program Erasmus+ 2016/2017 fellowship - Staff Mobility for Teaching Assignments (STA), svolta presso il Department of Machinery Exploitation and Management of Production Process, University of Life Science in Lublin, Poland. 21-24 Novembre 2017.
Ciclo di lezioni sulla tematica: "Renewable Energy in agricultural sector", finanziati con borsa di studio nell'abito del Program Erasmus+ 2017/2018 fellowship - Staff Mobility for Teaching Assignments (STA), svolta presso l’Instituto Politécnico de Bragança, Bragança, Portugal, 14-18 May 2018.
Ciclo di lezioni sulla tematica: "Renewable Energy in agricultural sector", finanziati con borsa di studio nell'abito del Program Erasmus+ 2016/2017 fellowship - Staff Mobility for Teaching Assignments (STA), svolta presso la Faculty of Engineering, Latvia University of Agriculture, Latvia, 23-28 Maggio 2018.
Ciclo di lezioni sulla tematica: "Sprayers and their sustainable employment", svolta presso la Kazakh National Agrarian University (KazNAU), Almaty, Kazakhstan, 20-25 Giugno 2018.
Ciclo di lezioni sulla tematica: "Sprayers and their sustainable employment", svolta presso la National Academy of Agrarian Science, NATIONAL SCIENTIFIC CENTER, «Institute of agricultural engineering and electrificatìon», Kiev, Ukraine, 3-7 Luglio, 2018.
Ciclo di lezioni sulla tematica: "Renewable Energy in Agriculture", svolta presso la Faculty of Engineering, Latvia University of Life Sciences and Tecnologies, Jelgava (Latvia), years 2017/2018 and 2018/2019.
Experiences abroad and
ERASMUS+ Fellowships 2009 (May, 11 – November, 2), Iowa State University (USA): Research Internship on Ph.D Thesis.
Research on Geothermal Energy systems for Greenhouse at Iowa State University.
2017 (March 20-25), University of Life Sciences in Lublin - Department of Machinery Exploitation and Management of Production Processes - Poland. Activities Teaching Staff Mobility A.A. 2015/2016. TUCEP Call Winner, ERASMUS + for staff teaching, agreement n. 2015-1-IT02-KA103-014384.
2017 (November 21-24), University of Life Sciences in Lublin - Department of Machinery Exploitation and Management of Production Processes - Poland. Activities Teaching Staff Mobility A.A. 2016/2017. TUCEP Call Winner, ERASMUS + for staff teaching, agreement n. 2016-1-IT02-KA103- 023933.
2018 (May, 14-18), 14th IPB Erasmus Week: Instituto Politécnico de Bragança, Bragança - Portugal. Activities Teaching Staff Mobility A.A. 2017/2018. TUCEP Call Winner, ERASMUS + for staff teaching, agreement n. 2017-1-IT02-KA103-036409.
2018 (May, 23-28), Faculty of Engineering, Latvia University of Agriculture - Latvia. Activities Teaching Staff Mobility A.A. 2016/2017. TUCEP Call Winner, ERASMUS + for staff teaching, agreement n. 2016-1-IT02-KA103-023933.
2019 (May 8-10), Faculty of Engineering, Latvia University of Agriculture - Latvia. Mobility Training Staff Activity A.A. 2017/2018. TUCEP Call Winner, ERASMUS + for staff training, agreement n. 2017-1-IT02-KA103-036409.
16/09/2018 - 15/09/2020 Academic scientific research (fixed-term)
Department Agricultural and Environmental Science (DISAAT) of the University of Bari “Aldo Moro”.
Mechanics applied to the agricultural and agro-industrial sector
Scientific-disciplinary sector AGR/09 "Agricultural Mechanics
Curriculum Vitae Replace with First name(s) Surname(s)
© European Union, 2002-2018 | europass.cedefop.europa.eu Page 10 / 15
16/09/2015 - 15/09/2018 Academic scientific research (fixed-term)
Department Agricultural and Environmental Science (DISAAT) of the University of Bari “Aldo Moro”.
Photovoltaic, hydrogen, solar thermal and geothermal stand-alone system for greenhouse heating.
Scientific-disciplinary sector AGR/09 "Agricultural Mechanics
01/09/2019 - 31/08/2020 High school teacher (leave of absence)
BAIS026004, Scuola Secondaria Di Secondo Grado Statale, I.I.S.S., "C. Colamonico - N. Chiarulli ", Via Prof. Colamonico, 5, 70021 Acquaviva Delle Fonti (Ba), Italy.
Key skills: Mechanical technologies and applications, Installation and maintenance technologies and techniques, Technology and graphic representation techniques, IeFP professional qualification courses.
Subject certification: A042 – mechanical and technological disciplines.
01/09/2018 - 31/08/2019 High school teacher (leave of absence)
BRIS006001, Scuola Secondaria Di Secondo Grado Statale, I.I.S.S. "C. Agostinelli", Via Ovidio, s.n.c., 72013, Ceglie Messapica (Br), Italy.
Key skills: Mechanical technologies and applications, Installation and maintenance technologies and techniques, Technology and graphic representation techniques, IeFP professional qualification courses.
Subject certification: A042 – mechanical and technological disciplines.
15/09/2016 - 31/08/2018 High school teacher (leave of absence)
BRRI010007, Scuola Secondaria Di Secondo Grado Statale, Ipsia G. Ferraris, Via Adamello N.18, 72100, Brindisi, Italy.
Key skills: Mechanical technologies and applications, Installation and maintenance technologies and techniques, Technology and graphic representation techniques, IeFP professional qualification courses.
Subject certification: A042 – mechanical and technological disciplines.
22/12/2015 - 30/06/2016 High school teacher (fixed-term) (leave of absence)
ARIS01200B, Scuola Secondaria Di Secondo Grado Statale, I.I.S.S. “Enrico Fermi”, Piazza Matteotti 1, 52011, Bibbiena (AR), Italy.
Key skills: Mechanical technologies and applications, Installation and maintenance technologies and techniques, Technology and graphic representation techniques, IeFP professional qualification courses.
Subject certification: A042 – mechanical and technological disciplines.
29/10/2014 - 31/08/2015 High school teacher (fixed-term)
SOIS008005, Istituto di Istruzione Superiore "B. Pinchetti", via Monte Padrio 12, 23037, Tirano (SO), Italy.
Key skills: Mechanical technologies and applications, Installation and maintenance technologies and techniques, Technology and graphic representation techniques, IeFP professional qualification courses, Regional qualification courses "Motor Vehicle Repair Operator" (ORVM). Mechanical technology for motor vehicles, techniques and technologies for installation and repair of motor vehicles.
Classe di concorso: A042 – discipline meccaniche e tecnologia.
23/10/2014 - 27/10/2014 High school teacher (fixed-term)
RETD02000L, Istituto industriale I.T.C Luigi Einaudi, Via Prati 2, 42015, Correggio (RE), Italy.
Key skills: Mechanical technologies and applications, Installation and maintenance technologies and
Curriculum Vitae Alexandros Sotirios Anifantis
© European Union, 2002-2018 | europass.cedefop.europa.eu Page 11 / 15
techniques, Technology and graphic representation techniques, IeFP professional qualification courses.
Subject certification: A042 – mechanical and technological disciplines.
04/10/2013 - 30/06/2014 High school teacher (fixed-term)
ARIS01700E, Scuola Secondaria Di Secondo Grado Statale, IPSIA "F. Buitoni", Largo Mons. Luigi di Liegro, 5, 52037 Sansepolcro (AR), Italy.
Key skills: Mechanical technologies and applications, Installation and maintenance technologies and techniques, Technology and graphic representation techniques, IeFP professional qualification courses.
Subject certification: A042 – mechanical and technological disciplines.
03/09/2012 - 03/07/2013 Research contractor (fixed-term)
Department Agricultural and Environmental Science (DISAAT) of the University of Bari “Aldo Moro”.
Research project: "Sustainability of the production of potted plants in the Mediterranean environment - PON 01_01611 SO.PRO.ME", funded by MIUR funds. The scientific manager of the aforementioned project having as its object: "Acquisition of primary data for LCA studies on the production of compost at the Eden'94 firm of Manduria by drafting of a specific questionnaire and installation of sensors; implementation of data on the production of compost on a specially prepared database " was Dr. Giovanni Russo.
Scientific-disciplinary sector AGR/10 - Rural Buildings and Agroforestal Territory.
29/09/2011 - 29/03/2012 Lead Product Manager (Winner of a Work Fellowship)
General Electric Oil & Gas, Nuovo Pignone S.p.A., Strada Provinciale Bari-Modugno-Toritto, 10, Bari, 70123, Italy.
Design and execution of cost-out activities on the product, not only by designing and guiding the implementation of new structured products, but also by coordinating and supporting the targets of the Applications, Engineering and Sourcing teams.
Sector: Oil & Gas
18/04/2011 - 18/10/2011 Lead Cost-Out Manager (Winner of a Research Fellowship)
Azienda Floras S.R.L., Ruvo di Puglia, Bari, Italy.
Project Work Innovation: definition of a theoretical-experimental model for the analysis of production costs of flower-nursery products in a protected environment, in order to identify the main expense factors and hypothesize possible technical plant solutions to reduce them. In particular, energy analysis of diesel heating systems and their conversion through the use of alternative photovoltaic- geothermal-solar thermal energy sources.
Scientific-disciplinary sector AGR/10 - Rural Buildings and Agroforestal Territory.
04/06/2011 - 04/10/2011 Research contractor (fixed-term)
Department Agricultural and Environmental Science (DISAAT) of the University of Bari “Aldo Moro”.
Research project called “Use in sustainable industrial floriculture of innovative mulching materials from renewable resources - IN. PAC. FLOR.”, Financed with MIPAF funds. The scientific manager of the aforementioned project having as its object: "Comparison of the mechanical, thermal and radiometric properties of degradable films with respect to plastic films traditionally used for mulching, and their degradation process; arrangement of survey systems for climate parameters: probes and data loggers ”was Prof. Giacomo Scarascia Mugnozza.
Scientific-disciplinary sector AGR/10 - Rural Buildings and Agroforestal Territory.
30/06/2010 - 30/10/2010 Research contractor (fixed-term)
Department Agricultural and Environmental Science (DISAAT) of the University of Bari “Aldo Moro”.
Research project called “Use in sustainable industrial floriculture of innovative mulching materials from
Curriculum Vitae Replace with First name(s) Surname(s)
© European Union, 2002-2018 | europass.cedefop.europa.eu Page 12 / 15
EDUCATION AND TRAINING
renewable resources - IN. PAC. FLOR. ”, Financed with MIPAF funds. The scientific manager of the aforementioned project having as its object: "Comparison of the mechanical, thermal and radiometric properties of degradable films with respect to plastic films traditionally used for mulching, and their degradation process; provision of survey systems for climate parameters: probes and data loggers ”was Prof. Giacomo Scarascia Mugnozza.
Scientific-disciplinary sector AGR/10 - Rural Buildings and Agroforestal Territory.
20/06/2006 - 20/12/2006 Lead Cost-Out Manager (Winner of a Work Fellowship)
Design studio “Giovanni Cella” (PC), Italy.
Design of machines and manipulators for industrial automation. In particular, design and static and kinematic analysis of complex structures connected to actuators with roto-alternative motion. CAD- FEM analysis using Solid Edge v18, Cosmos and Ansys.
Sector: mechanical design - industrial automation.
Public Examination Winner 08/25/2016 - Public Examination High School Teacher DDG 106 of February 23rd 2016 -
Secondary Degree I and II, MINISTRY OF UNIVERSITY AND RESEARCH EDUCATION, assigned by the Regional Scholastic Office for Puglia on 08 / 09/2016 with protocol n.14463 to the territorial area Puglia 11 with juridical effect as 2016/2017, CLASS A042 - Mechanical sciences and technologies, REGIONE PUGLIA - Graduated ranking of merit (21/03/2017), Score 83/100, ranking 11.
29/06/2015 - Public Examination, based on qualifications and public discussion, for the coverage of n. 1 fixed-term Researcher position at the University of Bari Aldo Moro, competition section 07 /
c1 agricultural engineering, forestry and biosystems - scientific-disciplinary sector AGR / 09 agricultural mechanics, called by D.R. 453 dated 02/18/2015, the notice of which was published in G.U. - iv special series n. 17 of 03/03/2015.
17/01/2013 - Announcement concerning the methods of admission to the Active Formative Training Courses (TFA) for teaching in the first and second grade secondary school, AA 2011-2012,
D.R. n. 167 of May 3, 2012. Given the D.R. n. 20 of 17/01/2013 with which the merit ranking relative to the selection for the competition of class A020 - Mechanical Disciplines and Technology was approved. Given the adjusted ranking of the Polytechnic of Bari, D.R. n. 167 of 15/02/2013, score 74, ranking position 20. 12/22/2006 - Public Examination, for examinations, XXII cycle related to Doctor of Philosophy (PhD) having administrative headquarters at the University of Bari studies, published in the official
gazette n. 88 of 17 November 2006 - iv special series - competitions. DOCTORATE IN TERRITORY AND AGROFORESTAL ENVIRONMENTAL ENGINEERING, Scientific Area: 8, Coordinator: Prof. Giacomo SCARASCIA MUGNOZZA. Scientific Disciplinary Sectors: AGR / 10. Duration: 3 years. Curricula: Agricultural and Forestry Engineering.
01/09/2011- 01/07/2012 Active Training Internship in Mechanical Disciplines and Technology, class of
competition A020. EQF LEVEL 8
Polytechnic of Bari, Bari, Italy.
Final report title: Design of Mechanical Oscillations systems. Final exam date: 09/06/2013.
01/01/2007- 31/12/2009 Doctor of Philosophy in Land and Agro-forestry Engineering. EQF LEVEL 8
Department PROGESA – University of Bari, 165/A, via Giovanni Amendola, 70126, Bari, Italy. Tel/Fax: ++39 080 5442977. http://www.progesa.uniba.it/
Thesis title: Experimental technological solutions for the production of renewable energy in agriculture. Thesis topic: Development of innovative prototypes of door and window systems powered by integrated renewable energy sources: photovoltaic-geothermal and solar thermal. Final exam date: 29/04/2011.
11/05/2009- 02/11/2009 Visiting Scientist/Student as Ph.D. student EQF LEVEL 8
Iowa State University. College fo Agriculture & Life Sciences. Ames, Iowa 50011, (515) 294-4111
Research Internship Training on Ph.D. Thesis, Research on Geothermal Energy Systems for Greenhouses - Biosystems Engineering
Curriculum Vitae Alexandros Sotirios Anifantis
© European Union, 2002-2018 | europass.cedefop.europa.eu Page 13 / 15
PERSONAL SKILLS
01/10/1999 – 22/07/2005 Master Degree in Mechanical Engineering EQF LEVEL 7
Polytechnic of Bari, Bari, Italy.
Mechanics, kinematics, mechatronics and robotics, structural analysis, thermodynamics and manufacturing. Degree thesis entitled “Nanoscale geometry effects on capillary adhesion”. Final Mark 110/110.
15/09/1994 – 03/07/1999 Higher National Diploma EQF LEVEL 5
High School: L.S.S. “A. SCACCHI”, Bari, Italy.
Scientific High School
Professional training courses June, 13, 2008: Partecipazione al corso di formazione dal titolo: “Geotermia a bassa entalpia, le pompe di calore geotermiche”, organizzato da European Project Certification s.r.l. (EPC), Roma, Italia.
July, 9-20, 2018: Partecipazione al corso di Spatial Statistics Course “Introduction to Spatial Data Processing for Sustainable Management of Environment”, Prof. Annamaria Castrignanò, Bari, Italia.
Mother tongue(s) Italian
Listening Reading Spoken interaction Spoken production
English C1 C1 C1 C1 C1
Greek A1 A1 A1 A1 A1
Digital skills SELF-ASSESSMENT
Proficient user Proficient user Proficient user Basic user Proficient user
Main systems: Windows, Android.
CAD: AutoCad, Rhinoceros 3D, Solid Edge.
CAM: FeatureCam.
Precision agriculture: Qgis, Pixer4DMapper, Pixer4DField, GEM 4.0 Cheetah, RStudio, Flir Thermal Studio.
Skills and Qualifications March, 2003: Mechanical design (year of Machine Construction project). June, 2004: "Occupational Safety" Module (technical examination of hydraulic works). February, 2006: Qualification as an Engineer. April, 2011: Registration in the Register of engineers in the province of Bari - sectors: Civil and Environmental, Industrial, Information. September, 2013: Qualification as a teacher in the A020 competition class, mechanical disciplines and technology. First cycle TFA A.A. 2011/2012. June, 2014: ECDL - IT Security - Specialized Level.
Driving licence A3/B
Bari, 19/07/2019 Sign Prof. Eng. Alexandros Sotirios Anifantis
_____________________________________
© European Union, 2002-2018 | europass.cedefop.europa.eu Page 15 / 15
Identity Card