Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with...

24
Permanent formwork, recess formers and formwork accessories Technologies for the construction industry FRANK

Transcript of Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with...

Page 1: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Permanent formwork, recess formers and formwork accessories

Technologies for the construction industryFRANK

Page 2: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Max Frank GmbH & Co. KG

Mitterweg 1

94339 Leiblfi ng

Germany

Tel. +49 9427 189-0

Fax +49 94 27 15 88

[email protected]

www.maxfrank.com

2 w w w.ma x f r ank .com

Page 3: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Product overview 4

Permanent Formwork

Fibre concrete edging formwork including accessories – formwork for balconies and walls 8

Fibre concrete shutter panels – for fl oor edges and bridge edge beams 10

Fibre concrete joint sealing strips – sealing of formwork joints 11

Fibre cement panels- lost formwork in bridge construction 11

Cement bound boards – permanent formwork for fl oor-edges 12

Cement bound boards – permanent formwork for ring beams and lintels 12

Recess Formers

Metal box-out shutters 13

Fratec – polystyrene recess formers of any shape 15

Pecafi l® – recesses made from a steel mesh enclosed in a polyethylene fi lm 15

Cardboard box-out forms for rectangular shapes 15

Stremaform® – expanded metal formwork elements for recesses 16

Stremaform® – expanded metal formwork elements for conical shapes 16

Release Agents

Trennfi t range of concrete release agents 17

Trennfi t accessories 19

Formwork accessories

Joint profi les – transmission of shear forces 20

Threaded steel bar – accessories 21

Profi les – triangular and trapezoidal plastic profi les and rails 22

Adhesive joint tapes 22

References 23

3Techno log ies fo r the cons t ruc t ion indus t r y

Content

Page 4: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Verlorene Schalung im Ort beton- und Fertigteil-

bau bedeutet, dass das Verschalungsmaterial im

Regelfall im Beton verbleibt und nur eine einmalige

Nutzung möglich ist. Zusätzlich zu der hochwer-

tigen, streichfertigen Ober fl äche entsteht eine en-

orme Zeit- und Kosteneinsparung, da kein kompli-

ziertes Ausschalen notwendig ist. Nutzen Sie unser

umfangreiches Sortiment verlorener Schalungen.

Verlorene Schalungen

ab Seite 8

ab Seite 13

Aussparungen

Die Schalungselemente aus Me tall, Karton,

Styropor oder umweltfreundlicher Folie entspre-

chen den nationalen und internationalen Normen

und Standards und bie ten für jede Aussparung das

passende Schalungselement. Somit ist das Scha-

len von Aussparungen bei nahezu allen Bauobjekten

sichergestellt.

Permanent formwork can be used for in-situ and

precast concrete constructions. This type of

formwork gives a high-quality surface fi nish ready for

painting or coating. As traditional formwork removal

is no longer required the use of permanent formwork

can save time and money. You can profi t from using

our varied range of permanent formwork.

Permanent formwork

see page 8

see page 16

Recess formers

Recess formers made of steel, cardboard, polystyrene,

expanded metal and polyethylene coated steel mesh

all comply with national and international norms and

standards. We can offer a solution from our range

of recess formers that meets all of your construction

needs.

4 w w w.ma x f r ank .com

Page 5: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

ab Seite 17

Betontrennmittel

Trennmittel werden vor dem Betonieren auf die

Schalung aufgetragen, um einem Haften des

Betons an der Schalung und somit einem Zerstören

dieser vorzubeugen.

Auch nach dem Aushärten des Betons ermöglicht

der Einsatz von Trennmittel ein einfaches Ablösen

der Schalung von der Betonoberfl äche.

ab Seite 20

Schalungszubehör

Um Schalungsarbeiten einfach und schnell

durchzuführen, erweist es sich als sinnvoll,

bestehende Zubehörteile, z. B. zum Einbau von

Gewindestahl oder zur Erstellung von defi nierten

Ecken und Kanten aus Beton, einzusetzen.

Informationen über unser komplettes

Produktsortiment finden Sie im Internet

unter www.maxfrank.de

see page 17

Concrete Release Agents

The Trennfi t range of release agents is suitable

for use with all types of formwork and concrete.

Trennfi t is non-hazardous and when used with our

approved range of accessories provides protection

to the environment.

see page 20

Formwork accessories

A range of threaded steel bar formwork accessories

to ensure that simple and easy formwork erection

is readily achieved. Accessories for production of

defi ned corners, angles and tie hole recesses are

also available.

5Techno log ies fo r the cons t ruc t ion indus t r y

Page 6: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Pecafi l®universal formwork

Metal box-out

U-Korb®

Floor-edge insulating formStremaform®

Bar spacer

Lintel

Shutter panel

Fratec recess former

Fratec recess former

Box-out shutter

In-situ concrete

construction

Individually prefabricated permanent

formwork and recess formers replace

traditional formwork. The FRANK

range of special formwork elements

used in conjunction with traditional

formwork or as stand alone elements

are easily and rapidly fi xed in position.

The use of precast units can lead to

signifi cant time and cost reductions

on site as well as better construction

tolerances.

6 w w w.ma x f r ank .com

Special products for in-situ concrete construction

Page 7: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Egcobox® cantilever connector

Permanent edging formwork

Permanent edging form

work

Egcoscal

Acoustic decoupling

of the stair fl ight

Egcosono / Egcotrit

t

acoustic decoupling

of the stair fl

ight

FRANK offers a varied product

range including numerous special

products for pre cast concrete

construction. High-quality products,

such as permanent formwork

systems, recess formers, spacers,

insulated cantilever connectors and

products that acoustically decouple

concrete elements guarantee

fl exible and economic concrete

construction.

Precast concrete

construction

Combined bar spacer

7Techno log ies fo r the cons t ruc t ion indus t r y

Special products for precast concrete construction

Page 8: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Standard type S

without a water drip former

Permanent edging formwork without a water drip former gives

a smooth surface to the semi-fi nished concrete element. This type

of permanent edging formwork is mainly used for staircases, slab

openings and for permanently visible recesses in concrete (indoor

use).

Standard type S

with a water drip former

Permanent edging formwork with a water drip former produces a drip

nose on the bottom side of the semi-fi nished concrete element. This

permanent edging formwork is mainly used for cantilevered concrete

slabs, such as balconies. The reusable drip former is positioned

on the formwork preparation table prior to installation of the edging

formwork and is glued in position with hot-melt adhesive.

with

NL-BSB

Ac

cording to the Dutch

assessment guideline BRL5070

Permanent edging formwork elements for use

in precast and insitu applications. Used for the

production of visible surfaces such as balcony

edges and for door and window openings in twin-

wall constructions.

Permanent edging formwork

made of extruded

fi bre-reinforced concrete

8 w w w.ma x f r ank .com

Permanent formwork

Page 9: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Slab type D permanent edging formwork

with one sealing insert

Permanent edging formwork with a single plastic sealing strip

is mainly used for the production of balcony elements. The permanent

edging formwork produces a clean cut and blowhole free exposed

side of the precast component and saves costs for expensive

remedial work. The sealing insert is removed after concreting and

the drip nose formed behind now becomes visible.

Wall type W permanent edging formwork

with two sealing inserts

Permanent edging formwork with two plastic sealing strips is mainly

used to form the openings for doors and windows in twin-wall

construction. The superior fi nish of the extruded fi bre concrete gives

an excellent exposed concrete quality.

The sealing inserts are removed after concreting. The gaps

created are either covered by the door panels or they can be

in-fi lled, if required.

Typ S without a water drip former

Typ S with a water drip former

Typ D with a sealing insert

Typ W with two sealing inserts

FRANK permanent edging formwork made of extruded fi bre-reinforced concrete guarantees

a perfect bond with in situ-concrete, is fi re resistant to DIN 4102, has a high compressive strength

and guarantees the required quality and durability of the exposed concrete. This product range has

an NL-BSB certifi cate in conformity with the Dutch assessment guideline BRL5070.

9Techno log ies fo r the cons t ruc t ion indus t r y

Permanent formwork

Page 10: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

1.BA

2.BA

with

NL-BSB

Ac

cording to the Dutch

assessment guideline BRL5070

Type FBSB standard shutter panel

An extruded fi bre concrete formwork panel used to conceal

construction joints on exposed wall locations and to fi ll the gap

between temporary soffi t formwork and walls.

Benefi ts at a glance:

■ Time saving, no formwork erection and removal

■ Concrete laitance cannot escape through poor

quality formwork joints

■ Good bonding with in-situ concrete

■ Stable shape

1.BA

2.BA

with

NL-BSB

Ac

cording to the Dutch

assessment guideline BRL5070

Type FBAP bridge shutter panel

Specially profi led forms with chamfers for use on bridge parapet

sections which may require the passage of reinforcement or are in

diffi cult to access locations. Use of this type of permanent formwork

saves time and costs because expensive temporary formwork is no

longer required.

Please contact us for special versions of any of our permanent formwork systems!

10 w w w.ma x f r ank .com

Permanent formwork

Page 11: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Type FSS joint sealing strips

A fi bre cement formwork element with no ribbing used to fi ll the gap

between temporary soffi t formwork panels and gaps at walls without

the need for complicated adjustment and cutting of shutter panels.

■ For covering formwork joints

■ Good bonding with concrete

■ Concrete coloured – light grey

■ Can be nailed – easy to fi x

■ Chamfered edges for optimum anchorage

Type FZP fi bre cement panels

Permanent soffi t formwork for use on composite bridge decks

to provide a permanent soffi t between the main support beams

(concrete or steel).

The panels are made of cement, cellulose, polypropylene fi bre and

minerals, a composition that guarantees excellent mechanical and

physical properties. Their low water absorption properties make

them eminently suitable for use in all permanently exposed locations.

Fibre cement panels are supplied individually and can be easily cut to

size on site and installed immediately.

11Techno log ies fo r the cons t ruc t ion indus t r y

Permanent formwork

Page 12: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Type DEAB permanent fl oor-edge form

This permanent fl oor-edge form is a low-cost alternative to

conventional fl oor-edge insulating systems. Its inner side is fi tted with

back anchors, thus creating an excellent bond with in-situ concrete.

■ High-pressure resistant, cement based wood particle board

■ Construction materials class B1 – low infl amability (DIN 4102-B1)

■ Simple fi xing with 2-K-fi xing foam

Type STUKA permanent lintel form

The use of type STUKA lintel formwork made of high-pressure

resistant, cement based wood particle boards eminently facilitates

formwork erection and concreting of ring beams and lintels.

■ Simple fi xing using 2-K-fi xing foam

■ Construction materials class B1 low infl amability (DIN 4102-B1)

■ High-pressure resistant, cement based wood particle board

■ Inner side fi tted with back anchor, good bonding with in-situ

concrete

■ Can be supplied for all wall thicknesses, special dimensions

can be supplied upon request

The use of reusable stirrups prevents the lintel shuttering from

buckling and a precise concrete edge is thus produced.

12 w w w.ma x f r ank .com

Permanent formwork

Page 13: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Metal box-out shutters made of interlocked sheet

steel are used as permanent formwork or as recess

formers. Upon customer’s request, FRANK transports

the box-outs to the construction site preassembled

or unassembled. These metal box-out shutters used

as permanent formwork provide excellent shear force

transmission.

■ Easy handling at the construction site

■ The shutter profi le fulfi ls the requirement for the

highest category “indented” according to DIN

1045-1 and/or DIN EN 1992-1-1.

■ Guarantees excellent bond with in-situ concrete

■ Cost saving: no formwork removal required

Metal box-out shutters

Preassembled metal box-out shutters

Metal box-out shutters made of interlocked sheet steel are mainly

used for beams with one end fi xed and for small dimensions,

e.g. machine bases.

■ Completely assembled box-out shutters are supplied in

appropriate dimensions specifi ed by the project and supplied

directly to the construction site.

■ Minimum size available: from 200 x 200 mm.

Unassembled folding box-out shutters

Unassembled metal box-out shutters made of interlocked sheet

steel can be used for the same applications as preassembled

box-out shutters. They offer further benefi ts due to their specifi c

delivery shape.

■ Small freight and storage volumes – one pallet may contain

up to 30 box-out shutters

■ Simple and quick assembly using the included self tapping

steel screws using pre-drilled holes

■ Due to shutter corners being pre-punched in the works,

folding the shutter together is extremely simple

13Techno log ies fo r the cons t ruc t ion indus t r y

Recess formers

Page 14: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Factory made stiffening

for box-out shutters

Both folding box-out shutters and L-shaped box-out shutters are

made of stable trapezoidal sheet steel. There is usually no need for

stiffening.

If, however, particularly large-size recesses must be produced,

we recommend additional stiffening of the box-out shutters – see

chart below.

The preassembled box-out shutters are stiffened and fi tted with

a base in our factory and they are transported to the construction site

completely assembled.

Stiffening chartValues given in the chart are approximate values only and depend on the actual in-situ conditions and on the concrete pour rate

Box-out shutter width cm

Box-out shutter height cm

30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190

45/45

50/50

55/55

60/60

65/65

70/70

75/75

80/80

85/85

90/90

95/95

100/100

Box-out shutter self-supporting Stiffen box-out shutter at site

L-shaped galvanized sheet

steel box-out shutters

L-shaped galvanized sheet steel box-out shutters are supplied with

a minimum size of 700 x 700 mm. They are eminently suitable for

use in beams with one end fi xed and for production of lead throughs

for slabs and bases, e.g. for crane positioning.

■ Cost-saving: simple and quick assembly without additional fi xings

■ Delivery to the construction site is unassembled in two separate

L-shapes

■ Very large sizes are possible

14 w w w.ma x f r ank .com

Recess formers

Page 15: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Fratec special formwork for recesses

Individually shaped formwork elements that allow for easy production

of apertures in walls or slabs, wall openings, domes, round-shaped

windows, recessed light wells, columns etc., both for precast and

in-situ construction.

These lightweight formwork elements are delivered to site ready

for installation. Elements are simply attached to the conventional

formwork. Fratec elements can easily be removed after concrete

curing without damaging the concrete.

Pecafi l® recess formers

Although, mainly used for the construction of ground beams and pile

caps Pecafi l® is also eminently suited to the production of recesses.

Two delivery options are available for Pecafi l® recess formers.

Elements can be delivered to site after being pre-cut into strips

and bent to your requirements in our factory. Alternatively, fl at strips

can be delivered to site and then cut to size and bent insitu. After

installation, formwork erection, reinforcement and concreting can

take place immediately without any interruption.

After removal from the concrete, it is not necessary to clean the

smooth, non-absorbing surface of the Pecafi l® material. If handled

with care, up to fi ve uses are possible.

Cardboard box-out forms

Using this special cardboard box to form openings in slabs is an

economical alternative to conventional formwork systems.

■ Cost saving: No manual fabrication of recess formwork,

quick and easy handling

■ Different sizes can be supplied

■ Easy stripping by pulling the hand holds on the cover

■ Internal void is protected against concrete ingress

■ Can be cut on site to reduce height, as required

■ Strong due to the integrated internal stiffening ring

Possible combinations:

15Techno log ies fo r the cons t ruc t ion indus t r y

Recess formers

Page 16: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Stremaform® hopper formwork elements

Stremaform® can be used to form the upper inclined surface of

hoppers and other inclined elements. Stremaform® is also used

for round or rectangular formwork shapes in wastewater treatment

plants or silos or for inclined abutment surfaces.

The formwork, which can be shaped to size in our factory upon

request, can also be supplied with factory made stiffening for highly

loaded applications.

Stremaform® is securely fi xed to the reinforcement and thus protected

against movement due to upward pressure.

Stremaform®

formwork elements for recesses

Stremaform® expanded metal forms for recesses are used for the

production of wall or slab apertures and to create recesses in

concrete elements to allow for subsequent casting.

Stremaform® formwork elements for recesses

■ can be prepared and assembled in varied shapes and

dimensions in our factory according to your scheme

requirements.

■ can be supplied with internal bracing, concrete cover rails

and wooden covers for fall protection

■ have a rough surface for monolithic bond between fi rst and

second concrete pours

■ allow reinforcement bars to be pushed through

Stremaform® applications:

■ Leadthroughs for services and pipes

■ Recess for installation of frames and anchors for hydraulic

structures or similar applications

16 w w w.ma x f r ank .com

Recess formers

Page 17: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

The Trennfi t range of high-quality release agents are

suited for all types of formwork and are available for

different applications.

Trennfi t range of

release agents

All versions of Trennfi t are safe and

environmentally friendly:

■ Freeze-proof

■ Not subject to labelling under hazardous

materials Ordinances and EU-guidelines

■ Non dangerous goods according to UN,

IMO, ADR/RID and IATA/ICAO

■ Flash point PM > 100ºC

■ Giscode: BTM10

And they provide excellent results:

■ Adhesion between concrete and the formwork

is reduced by up to 95 %

■ Increased service-life of the formwork

■ Outstanding release action

■ No residues left on the concrete surface and

no fl ouring of the concrete surface

■ Plaster bonding capability unaffected

Coverage per litre of Trennfi t release agent when using the FRANK special sprayer:

Shuttering type Trennfi t B2 Trennfi t Super Trennfi t

Steel forms 60 – 70 m2 80 – 100 m2 60 – 70 m2

Smooth concrete formwork 5 – 15 m2 10 – 20 m2 5 – 15 m2

Smooth wood formwork 25 – 35 m2 30 – 40 m2 25 – 35 m2

Film coated formwork 50 – 60 m2 70 – 90 m2 50 – 60 m2

Rough wood formwork 15 – 25 m2 20 – 30 m2 15 – 25 m2

17Techno log ies fo r the cons t ruc t ion indus t r y

Release Agents

Page 18: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Trennfi t

The cost-effective release agent for all conventional types

of concrete.

■ For plaster and stucco works

■ Recommended for general concrete construction

Trennfi t Deactivator

Prevents and removes concrete deposits on machines and

equipment.

■ Preservation of equipment and formwork

■ Prevents soiling on moving machine parts

■ Reduces cleaning costs for equipment and formwork

■ Prevents the hardening of fresh concrete on equipment

and formwork

■ Outstanding rust-protection properties

Trennfi t B2

Biodegradable release agent

■ Eco-friendly and can be used in water

conservation areas and for general construction

■ Suitable for formwork made of expanded

polystyrene

■ Suitable for exposed concrete

■ For all concrete constructions

Trennfi t Super

The mechanical-chemical release agent for use when quality

really matters.

■ Can be used with either heated or unheated formwork in

precast applications

■ For Applications where the concrete is subsequently coated

■ For exposed concrete and white concrete

■ Outstanding rust-protection properties – prolongs equipment life

■ Suitable for all applications

18 w w w.ma x f r ank .com

Release Agents

Page 19: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Special sprayer made of stainless steel

■ Incorporates a special nozzle to give a fi ne spray that ensures

a thin uniform application of release agent.

■ Covers double the area compared to normal spraying devices

■ All spares and accessories are stock items for quick delivery

Special fi ller

for repairing formwork faces

■ For repair of damaged formwork

■ for a smooth fi nish to concrete surfaces

■ for fi lling of crevices and cracks

■ For sealing of cracks prior to crack injection work

■ For use as a glue for broken concrete edges, stones and boards

Collector tray with drum holder

■ TÜV tested

■ Drum volume > 200 litres

■ Prevents soil and ground water contamination

■ Simplifi es fi lling the sprayer with release agent

■ Filling without pump via a drain cock

Steel drums can be completely emptied

Drums containing Trennfi t can, if placed horizontally, be completely

emptied

With conventional drums the last 1800 ml cannot be removed.

19Techno log ies fo r the cons t ruc t ion indus t r y

Release Agents

Page 20: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Joint profi le former

Made from plastic

■ Creates the optimum concrete surface for the absorption of

shear forces in construction joints

■ Replaces trapezoidal strips

■ Can be used repeatedly

■ Can be cut to size on-site

The joint profi le fulfi ls the requirements of the highest

category “indented” according to DIN EN 1992-1-1

assuming a joint indented by 50%

composite reinforcement

*

angle 25°

20 w w w.ma x f r ank .com

Formwork accessories

Page 21: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Threaded steel bar accessories

Anchor rods allow quick and simple work at the

construction site. Underneath please fi nd a short

excerpt of our production programme. For more

details on our accessories for threaded steel

components, kindly refer to our current Product

List.

■ Anchor rod ST

900/1000 Ø 15 mm

■ Tie bar Ø 15 mm,

type B, weldable and

bendable steel

■ Loop anchor

■ Disc nut

■ Steel / plastic cone

■ Cast-iron water stop

■ Wing nut

■ Fixing anchor

■ Tie plate

21Techno log ies fo r the cons t ruc t ion indus t r y

Formwork accessories

Page 22: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Profi les for edges and corners

FRANK offers various plastic profi les, such as triangular and

trapezoidal profi les, for defi ned edges and corners in structural

concrete elements.

For different designs and precise details kindly refer to our current

Product List.

The self-adhesive corner profi le for exposed concrete produces

a slightly rounded corner. This geometry is in conformity with the

accident preventive regulation “Schools” GUV-VS1. The soft rubber

additionally seals the formwork joint.

Adhesive joint tapes

Adhesive joint tape

■ Special PVC adhesive tape with outstanding bonding

properties (pressure sensitive adhesive) for the sealing

of formwork joints etc.

■ Suitable for use on pre-oiled or clean surfaces

Foamed plastic joint tape

■ For application in areas where adhesive joint tape cannot

be used because of access

22 w w w.ma x f r ank .com

Formwork accessories

Page 23: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Shopping Centre

Bischofswiesen, Germany

Stremaform® formwork elements for recesses,

Stabox® rebar connections,

Spacers made of fi bre-reinforced concrete,

Egcobox® cantilever connector

FRANK products used:

Port of Rotterdam

Power Station

Rotterdam, Netherlands

Shutter panel standard

(glued to produce in-feed boxes with openings

for discharge pipes)

FRANK products used:

Diocese Rottenburg

Rottenburg am Neckar, Germany

Fratec special formwork for recesses

(enables you to produce extraordinary

architectural shapes)

FRANK products used:

23Techno log ies fo r the cons t ruc t ion indus t r y

Referenzen

Page 24: Permanent formwork, recess formers and formwork … · quality formwork joints Good bonding with in-situ concrete ... The shutter profi le ful fi ls the requirement for the highest

Max Frank GmbH & Co. KG

Mitterweg 1

94339 Leiblfi ng

Germany

Tel. +49 9427 189-0

Fax +49 9427 1588

[email protected]

www.maxfrank.com

44

0B

R0

1/0

6 –

IN

T/E

N –

03

/13