perma FUTURA - Quick Start Guide. g. with perma SELECT Software = 1 month = 3 months = 6 months...
1
=OK 2 1… 7 01/2016 07/2017 360° www.perma-tec.com KLACK! KLACK! 3. Activation / Installation of lubrication system 2. Prepare lube-point 1. Predefine installation / Select lubricant, discharge period + connecting parts perma FUTURA - Quick Start Guide Examples: Bearing lubrication Reducer Direct mounting Remote mounting for lube-points with vibration, limited mounting space, high temperature Select a suitable lubricant for perma FUTURA e. g. perma Multipurpose grease SF01 Select activator screw e. g. with perma SELECT Software = 1 month = 3 months = 6 months (refer to our product catalog for details) = 12 months Clean lube-point Remove grease fitting For remote mounting: Prefill lube-point and any grease lines / connections (use the same grease that is contained in the lubrication system) Add reducer and tubes (if required) Pressure check: Lube-point / all connecting parts (refer to perma FUTURA installation guide for details) For direct mounting: Prefill lube-point and any connecting parts (use the same grease that is contained in the lubrication system) Gas generator OK Note activation / exchange date on label Remove plug Add sealant © 2016/03 · Version: 2.0 · Art. No. 103771 Mounting bracket 1-point G1/4 female (109685) Hose connector G1/4 male for hose iØ 9.5 mm - push-lock (101554) Heavy Duty hose up to +100 °C oØ 16 mm x iØ 9.5 mm (101555) Hose connector G1/4 male for hose iØ 9.5 mm - push-lock (101554) Reducer
Transcript of perma FUTURA - Quick Start Guide. g. with perma SELECT Software = 1 month = 3 months = 6 months...
Blattformat: DIN A2Maßstab: 1:1
=OK
21…
7
01/2016
07/2017
360°
www.perma-tec.com
Blattformat: DIN A4Maßstab: 1:1
Blattformat: DIN A1Maßstab: 1:1
Blattformat: DIN A1Maßstab: 1:1
Blattformat: DIN A4Maßstab: 1:1
Blattformat: DIN A4Maßstab: 1:1
Blattformat: DIN A4Maßstab: 1:1
KLACK! KLACK!
3. Activation / Installation of lubrication system
2. Prepare lube-point
1. Predefine installation / Select lubricant, discharge period + connecting parts
perma FUTURA - Quick Start Guide
Examples: Bearing lubrication
Reducer
Direct mountingRemote mounting for lube-points with vibration, limited
mounting space, high temperature
Select a suitable lubricant for perma FUTURA e. g. perma Multipurpose grease SF01
Select activator screw e. g. with perma SELECT Software
= 1 month = 3 months = 6 months
(refer to our product catalog for details)
= 12 months
Clean lube-point Remove grease fitting
For remote mounting: Prefill lube-point and any grease lines / connections
(use the same grease that is contained in the lubrication system)
Add reducer and tubes (if required)
Pressure check: Lube-point / all connecting parts(refer to perma FUTURA installation guide for details)
For direct mounting: Prefill lube-point and any connecting parts
(use the same grease that is contained in the lubrication system)
Gas generator OK
Noteactivation / exchange date
on labelRemove plug
Add sealant
© 2
016/
03 ·
Vers
ion:
2.0
· Ar
t. N
o. 1
0377
1
Mounting bracket 1-point G1/4 female(109685)
Hose connector G1/4 male for hose iØ 9.5 mm - push-lock (101554)
Heavy Duty hose up to +100 °C oØ 16 mm x iØ 9.5 mm (101555)
Hose connector G1/4 male for hose iØ 9.5 mm - push-lock (101554)
Reducer
