PERISTALTIC PUMP PERISTALTICHE/MP2...PERISTALTIC PUMP Data -HT PH/REDOX SheetMP2 Specifications may...

PERISTALTIC PUMP Data Sheet MP2-HT PH/REDOX

Specifications may change without notice Via Maestri del Lavoro,5 - 02100 Vazia (RI) – ITALY Tel.:+ 39(0)746-229064; Fax:+ 39(0)746-221224

e-mail: [email protected] ; Web site: www.microdos.it 1/3 Rev. 1.2

DESCRIPTION

✓ Digital peristaltic pump with built in PH/REDOX and temperature controller ✓ PH or REDOX control setting by software ✓ Suitable for dosing acidic or basic / oxidizing or reducing products ✓ 3 different operating mode: Manual, ON/OFF, Proportional ✓ Manual function: constant dosing ✓ ON/OFF function: constant dosing with programmable activation threshold ✓ Proportional function: proportional dosage to the measurement distance

from the set point, fully programmable range of proportionality ✓ Proportionality of the dosage by variation of the motor rotation speed ✓ 4 languages menu: Italian, English, French, Spanish ✓ Instantaneous visualization of the % flow rate ✓ Instantaneous visualization of the pH/Redox and temperature values ✓ Password protected ✓ Time overdosage alarm (TAL System) ✓ Startup delay ✓ STAND-BY mode ✓ Priming button for a quick installation ✓ Default parameter restore option ✓ Backlit LCD Display 16 x 2 ✓ Alarm and dosing LED ✓ Power supply 90 ÷ 250 Vac 50-60 Hz ✓ Reinforced PP box ✓ Polycarbonate glass with quick coupling/uncoupling system ✓ PBT roller holder with 2 rolls ✓ Longer engine life and better performance under pressure with the aid of a

bearing for rotating the rollers holder ✓ IP 55 protection degree ✓ Easy programming and minimum maintenance ✓ 100 % Made in Italy ✓ CE approved

OPTIONAL KIT STANDARD Version BASIC Version MEDIUM Version FULL Version

✓ PBT Roller holder with 3 rolls On Demand On Demand On Demand On Demand

✓ PT100 Temperature Probe Predisposition ✘ ✘ ✔ ✔

✓ Hose breakage alarm ✘ ✘ ✔ ✔

✓ Dosing enabling ✘ ✘ ✘ ✔

✓ Level Probe Predisposition ✘ ✔ ✔ ✔

✓ Flow Sensor Predisposition ✘ ✔ ✔ ✔

✓ Relay alarm output (dry contact) ✓ Over/under measurement range alarm

✘ ✘ ✘ ✔

✓ SCHUKO plug ✘ ✘ ✘ ✔

✓ ON/OFF manual switch ✘ ✔ ✔ ✔




DESCRIPTION

Standard CONFIGURATION

Box Case Polypropylene

Roller Holder DELRIN

Hose material Santoprene

Power Supply 90 ÷ 250 Vac 50 – 60 Hz

Power Consumption 20 Watt

Net Weight 0,9 kg

Fittings PP ring nuts for hose 4 x 6 mm

Probe connection BNC

Injection valve / Foot filter Lip valve

Suction tube PVC 4 x 6

Delivery tube PE 4 x 6

TECHNICAL SPECIFICATIONS

Standard Flow rate Pressure

Tube material Tube dimensions

[mm] RPM

[l/h] [cc/min] [Bar] [PSI] 03 – 01* 3,0 50 1 14,5 Santoprene 5,8 x 9,3 20 06 – 01* 6,0 100 1 14,5 Santoprene 5,8 x 9,3 48 12 – 01* 12,0 200 1 14,5 Santoprene 5,8 x 9,3 104

*20% flow reduction in the 3-rolls version




ACCESSORIES KIT

STANDARD KIT

Injection Valve 1/2’’ PP-VL-VT lip valve

Foot filter 1/2’’ PP-VL-VT lip valve

2mt PE 4x6 delivery tube 2mt PVC 4x6 suction tube

INSTALLATION KIT ON DEMAND

INSTALLATION KIT PH PROBE COMPLETE+2 CLAMP SADDLE (BUFFER PH7-PH9) CODE 11.100.178

PH Electrode cable 5 mt. Body Epoxy

Buffer Solution pH 7,00 and pH 9,00

Nr. 2 Clamp Saddles Φ 50 1/2”

In line probe holder 1/2” PP

INSTALLATION KIT REDOX PROBE COMPLETE+2 CLAMP SADDLE (BUFFER 468mV) CODE 11.100.179

Rx Electrode cable 5 mt. Body Epoxy

Buffer Solution 468 mV

Nr. 2 Clamp Saddles Φ 50 1/2”

In line probe holder 1/2” PP

PERISTALTIC PUMP Data Sheet MP2-HT CHLORINE



DESCRIPTION

✓ Digital peristaltic pump with Chlorine Control instrument on board ✓ Copper/platinum amperometric or potentiostatic probe ✓ 3 operating functions: Manual, ON/OFF, Proportional ✓ Manual Function: constant dosing ✓ ON/OFF: constant dosing with programmable activation threshold ✓ Proportional: proportional dosing according to the measurement distance

from the set point, proportional range freely programmable. ✓ Proportional dosing by varying the rotation speed of the motor ✓ 4 languages menù: italian, english, french or spanish ✓ Flow rate percentage and p.p.m chlorine value showed in real time ✓ Programmable password ✓ Over dosing time alarm ✓ Starting delay ✓ Function STAND-BY to stop dosing ✓ Priming button for a quick installation ✓ Default parameter restore option ✓ Backlit digital display 16 x 2 ✓ Status and dosing led alarm ✓ Standard Power Supply 90 ÷ 250 Vac 50-60 Hz ✓ Reinforced PP box case ✓ Policarbonate with quick coupling / release system ✓ PBT 2 rolls roller holder ✓ Longer engine life and better performance under pressure with the aid of a

bearing for rotating the rollers holder ✓ IP 55 protection degree ✓ User-friendly setting and minimum maintanance ✓ 100 % Made in Italy ✓ CE approved

OPTIONAL KIT STANDARD Version

BASIC Version

MEDIUM Version FULL Version

✓ PBT Roller Holder with 3 rolls On Demand On Demand On Demand On Demand

✓ Hose Breakage Alarm ✘ ✘ ✔ ✔

✓ Dosing Enabling ✘ ✘ ✘ ✔

✓ Level Probe Predispsosition ✘ ✔ ✔ ✔

✓ Relay alarm output (dry contact) ✓ Over/under measurement range signal

✘ ✘ ✘ ✔


✓ ON/OFF Manual Switch ✘ ✔ ✔ ✔




DESCRIPTION



Roller holder DELRIN



Power Consuption 20 Watt

Net Weight 0,9 kg


Probe connection BNC / http

Injection Valve/ foot filter Lip Valve (PP + VT)

Suction Hose PVC 4 x 6

Delivery Hose PE 4 x 6

TECH SPECIFICATIONS

Standard Flow Rate Bach Pressure

Hose Material Hose Dimensions

[mm] RPM

[l/h] [cc/min] [Bar] [PSI] 03 – 011 3,0 50 1 14,5 Santoprene 5,8 x 9,3 20 06 – 011 6,0 100 1 14,5 Santoprene 5,8 x 9,3 48 12 – 011 12,0 200 1 14,5 Santoprene 5,8 x 9,3 102

1 20% flow rate decreasing on 3 rolls version




ACCESSORIES

STANDARD INSTALLATION KIT

Nr. 1 PP INJECTION VALVE 1/2’’

PP- Lip Valve -Viton®

Nr. 1 PP 1/2’ Foot Filter PP- Lip Valve- Viton®

Nr. 1 Delivery Hose 2mt PE 4x6

Nr. 1 Suction Hose 2mt PVC 4x6

Chlorine Probes to Use

Electrode Features PRO-CG CL3 PRO-CP CLI B

PRO-CP CLO M

Measurement Range 0 ÷ 5 PPM 0 ÷ 2 / 0 ÷ 20 PPM

Resolution 0,01 0,01

Analysis Minimum water flow 60 l/h 60 l/h

Body Copper PVC

Electrode material Platinum Gold

Operating temperature 5 ÷ 40°C 0 ÷ 45°C

Connections BNC HTP

Cable Lenght 1,5 m 1,5 m

Pressure 2 bar 1 bar

PERISTALTIC PUMP Data Sheet MP2-HT MULTIFUNCTION



DESCRIPTION

✓ Multifunctional digital peristaltic pump with adjustable flow rate by varying the rotation speed of the motor

✓ 7 different operating mode: Manual, Pulses, ppm, mA, Quantity, Timer dos, Timer

✓ Manual function: constant dosing. It is possible to activate a cyclic dosing with programmable delay, ON and OFF times

✓ Pulses function: flow proportional to the pulses received by a counter, with or without memory

✓ ppm function: automatically adjusted flow rate to reach the desired ppm level (counter signal)

✓ mA function: proportional to the received mA, proportionality range fully programmable

✓ Quantity function: dosing of a programmable quantity at each switching on or receiving of the enabling signal

✓ Funzione Timer dos: dosing at hourly intervals during reception of the enabling signal (e.g.: flocculant, oxygen, sanitizing dosage)

✓ Funzione Timer: 10 programmable doses, daily and weekly ✓ Flow rate calibration function ✓ 4 languages menu: Italian, English, French, Spanish ✓ Instantaneous visualization of the % flow rate ✓ Password protected ✓ Time overdosage alarm (TAL System) ✓ Startup delay ✓ STAND-BY mode ✓ Priming button for a quick installation ✓ Default parameter restore option ✓ Backlit LCD Display 16 x 2 ✓ Alarm and dosing LED ✓ Power supply 90 ÷ 250 Vac 50-60 Hz ✓ Reinforced PP box ✓ Polycarbonate glass with quick coupling/uncoupling system ✓ 2 PBT rollers holder ✓ Longer engine life and better performance under pressure with the aid of a

bearing for rotating the rollers holder ✓ IP 55 protection degree ✓ Easy programming and minimum maintenance ✓ 100 % Made in Italy ✓ CE approved




✓ Dosing Enabling ✘ ✘ ✔ ✔


✓ Relay alarm output (Dry Contact) ✘ ✘ ✘ ✔






DESCRIPTION







Net Weight 0,9 kg


Water meter/mA signal connection HTP

Injection valve/ foot filter Lip Valve (PP + VT)



TECH SPECIFICATIONS

Standard Flow Rate Pressure

Hose material Hose dimensions

[mm] RPM

[l/h] [cc/min] [Bar] [PSI] 03 – 011 3,0 50 1 14,5 Santoprene 5,8 x 9,3 20 06 – 011 6,0 100 1 14,5 Santoprene 5,8 x 9,3 48 12 – 011 12,0 200 1 14,5 Santoprene 5,8 x 9,3 102 20 – 012 20,0 333,3 1 14,5 Santoprene 5,8 x 9,3 160 02 – 042 2,0 33,3 4 58 Santoprene 4,8 x 9,6 20 05 – 042 5,0 83,3 4 58 Santoprene 4,8 x 9,6 48 1 20% flow rate decreasing on 3 rolls version 2 Please ask Us more details about these specific versions




ACCESSORIES


Nr. 1 PP 1/2’’ Injection valve PP- Lip Valve- Viton®

Nr. 1 PP 1/2’’ Foot filter PP- Lip Valve- Viton®

Nr. 1 Delivery hose 2mt PE 4x6

Nr. 1 Suction hose 2mt PVC 4x6

PERISTALTIC PUMP Data Sheet MP2-HT PULSES/PPM



DESCRIPTION

✓ Digital peristaltic pump with proportional flow rate according to pulses received by water meter

✓ 3 operating functions: Manual, pulses, ppm ✓ Manual: constant dosing. It is possible to activate a cyclic dosing with

programmable delay, ON and OFF times ✓ Pulses: proportional flow rate according to pulses received by water meter,

with or without memory ✓ ppm: automatically adkusted flow rate to achieve requested ppm level (signal

from water meter) ✓ Proportional dosing by varying the rotation speed of the motor ✓ 4 languages menù: italian, english, french or spanish ✓ Flow rate percentage showed in real time ✓ Programmable password ✓ Starting delay ✓ Function STAND-BY to stop dosing ✓ Priming button for a quick installation ✓ Default parameter restore option ✓ Backlit digital display 16 x 2 ✓ Status and dosing led alarm ✓ Standard Power Supply 90 ÷ 250 Vac 50-60 Hz ✓ Reinforced PP box case ✓ Policarbonate with quick coupling / release system ✓ PBT 2 rolls roller holder ✓ Longer engine life and better performance under pressure with the aid of a







✓ Relay Alarm Output (Dry Contact) ✘ ✘ ✘ ✔






DESCRIPTION

Standard Configuration






Net Weight 0,9 kg


Water meter connection HTP

Injection valve/ foot filter Lip Valve (PP + VT)



TECH SPECIFICATIONS

Standard Flow Rate Back Pressure

Hose Material Hose Dimensions

[mm] RPM





ACCESSORIES


Nr. 1 PP 1/2’’Injection Valve PP- Lip valve- Viton®

Nr. 1 PP 1/2’’ Foot Filter PP- Lip Valve- Viton®

Nr. 1 Delivery Hose 2mt PE 4x6

Nr. 1 Suction Hose 2mt PVC 4x6

PERISTALTIC PUMP Data Sheet MP2-HT mA



DESCRIPTION

✓ Digital peristaltic pump according to mA external signal ✓ 2 operating functions Manual, mA ✓ Manual: constant dosing. It is possible to activate a cyclic dosing with

programmable delay, ON and OFF times ✓ mA: proportional dosing according to mA received, proportional dosing freely

programmable ✓ Proportional dosing by varying the rotation speed of the motor ✓ 4 languages menù: italian, english, french or spanish ✓ Flow rate percentage and mA value showed in real time ✓ Programmable password ✓ Starting delay ✓ Function STAND-BY to stop dosing ✓ Priming button for a quick installation ✓ Default parameter restore option ✓ Backlit digital display 16 x 2 ✓ Status and dosing led alarm ✓ Standard Power Supply 90 ÷ 250 Vac 50-60 Hz ✓ Reinforced PP box case ✓ Policarbonate with quick coupling / release system ✓ PBT 2 rolls roller holder ✓ Longer engine life and better performance under pressure with the aid of a







✓ Relay Alarm Output (Dry Contact) ✘ ✘ ✘ ✔






DESCRIPTION

Standard CONFIGURATIONS






Net Weight 0,9 kg


mA signal connection HTP

Injection valve / foot filter Lip Valve (PP + VT)



TECH SPECIFICATIONS

Standard Flow Rate Back Pressure


[mm] RPM





ACCESSORIES






PERISTALTIC PUMP Data Sheet MP2-HT TIMER



DESCRIPTION

✓ Digital peristaltic pump with integrate Timer ✓ 4 operating functions: Manual, Quantity, Timer dos, Timer ✓ Manual: constant dosing. It is possible to activate a cyclic dosing with

programmable delay, ON and OFF times ✓ Quantity: programmable quantity dosing enabled every Turn On Funzione

Timer dos: dosing at an hourly rate during reception of the enabling signal (ex: flocculant dosage, oxygen, sanitizing)

✓ Timer: n°10 weekly and hourly programmable dosing ✓ Flow calibration function ✓ Flow regulation by varying the rotation speed of the motor ✓ 4 languages menù: italian, english, french or spanish ✓ Flow rate percentage showed in real time ✓ Programmable password ✓ Starting delay ✓ Function STAND-BY to stop dosing ✓ Priming button for a quick installation ✓ Default parameter restore option ✓ Backlit digital display 16 x 2 ✓ Status and dosing led alarm ✓ Standard Power Supply 90 ÷ 250 Vac 50-60 Hz ✓ Reinforced PP box case ✓ Policarbonate with quick coupling / release system ✓ PBT 2 rolls roller holder ✓ Longer engine life and better performance under pressure with the aid of a

bearing for rotating the rollers holder ✓ IP 55 protection degree ✓ User-friendly setting and minimum maintenance ✓ 100 % Made in Italy ✓ CE approved






✓ Relay output alarm (Dry Contact) ✘ ✘ ✘ ✔






DESCRIPTION

Standard CONFIGURATIONS






Net Weight 0,9 kg


Injection valve / foot filter Lip Valve (PP + VT)

Suction hose PVC 4 x 6

Delivery hose PE 4 x 6

TECH SPECIFICATIONS

Standard Flow Rate Pressure


[mm] RPM





ACCESSORIES






PERISTALTIC PUMP PERISTALTICHE/MP2...PERISTALTIC PUMP Data -HT PH/REDOX SheetMP2 Specifications may...

Documents

Transcript of PERISTALTIC PUMP PERISTALTICHE/MP2...PERISTALTIC PUMP Data -HT PH/REDOX SheetMP2 Specifications may...