(PERIOD: 1 APRIL 2018 31 MARCH 2019)

of 44

FORMAT FOR ANNUAL DEPARTMENT/CENTRE REPORT

(PERIOD: 1 APRIL 2018 – 31 MARCH 2019)

1. Year of Establishment of the Department /Centre: 1995

2. Academic Programmes Offered:

Bachelor of Technology (BTech) in

i. Mechanical Engineering

Master of Technology (MTech) in

(1) Machine Design,

(2) Fluid and Thermal Engineering,

(3) Manufacturing Science and Engineering,

(4) Computational Mechanics,

(5) Aerodynamics and Propulsion

Doctor of Philosophy (PhD)

3. No. of Laboratories with brief introduction: (Total No: 15 + 14) Brief Description of each

• Advanced Manufacturing Laboratory: Equipped with advanced equipments for manufacturing including micro-

fabrication facility using CO2 Laser cutting technology.

• Strength of Materials Laboratory: Basically dedicated for doing all kinds of testing including tensile testing, fatigue

testing, compressive testing, torsion testing, hardness testing, impact testing etc.

• Materials Science Laboratory: Dedicated for carrying out metallographic studies using highly precise microscope,

XRD etc.

• Fluid Mechanics Laboratory: This lab has basic fluid mechanics set-up. The lab is equipped with different flow

measuring set-ups such as venturimeter, orifice-plate, pitot tube, rotometer etc., where students can visualize the basic

theory of working of the flow meter.

• Thermal Science Laboratory: This lab consists of heat exchangers, equipments for conducting experiments on

conduction, convection and radiation, refrigeration systems etc. All these equipments facilitate learning of basic

Thermodynamics and Thermal Engineering at undergraduate level.

• Turbo-machinery Laboratory: This lab has different tabletop model of pumps and turbines where students can study

the performance characteristics of those machines. Students can strengthen their basic understandings of working and

applications of these machines.

• IC Engine Laboratory: This lab is for both undergraduates and graduate students. Some of the experiments which are

performed by under-graduate students are performance studies of both C.I. and S.I. engines, etc. Moreover studies on

the calorific values, exhaust gas characteristics, extensive studies of bio-diesel with both engines are done by post-

graduate students in their respective project works.

• Vibrations and Acoustics Laboratory: This lab demonstrates basic vibrational instruments to students at undergraduate

level. Also provides facilities for measurement of frequency signals, rpm etc, and facilities for data-acquisition which

are very much beneficial for research activities in the domain of vibrational analysis.

• Mechatronics and Robotics Laboratory: The Mechatronics and Robotics lab is equipped with various facilities to

educate the students at the undergraduate and postgraduate levels. Most of the robotics activities are facilitated to

students by this lab.

• Instrumentation and Control Laboratory: This lab performs calibration of pressure transducer/ gauge and other

mechatronics apparatus, provides strain-gauge measurement facilities etc.

• Theory of Machines Laboratory: This lab consists of all basic equipments for understanding mechanisms, apparatus

etc. at undergraduate level such as gyroscope, governor, jib-crane, screw jack, worm-wheel apparatus etc.

• Tribology Laboratory: Provides facilities for carrying out wear test of specimens of diff erent materials under the

condition of with lubrication/without lubrication.

• CAD/CAM Laboratory: Specialized in extending computer-assisted software tools needed for design and analysis such

as ABAQUS, ANSYS, Master CAM, Pro/E, ADAMS etc.

• Wind Tunnel Laboratory: Provides facilities for carrying out wind tunnel related experiments.

• 3D Printer Laboratory: Provides facilities for 3D printing.

In addition, 14 new laboratories have been built –

• Micro-machining lab

• Aerodynamics lab

• Electromechanics lab

of 44

• Fracture Mechanics and Composites Lab

• Welding lab

• Dynamics and Vibration lab

• Advance Mechatronics and Bio-materials lab

• Computation MD Lab

• Microfluidics Lab-1

• Microfluidics Lab-2

• Smart materials and structures lab

• CFD lab

• Gasification and Thermal Lab

• Hydraulic lab

4. Major Equipment and Facilities acquired during 1 April 2018 – 31 March 2019:

5. Major Areas of Research and Development:

Groupwise Research Areas are

Fluids and Thermal Engineering

• Computational methods for Incompressible flows

• DNS and LES of Turbulence

• Energy management and conservation

• High speed aerodynamics

• Interfacial heat and mass transport

• Metal hydride based thermal machines

• Micro and nano-scale thermal/fluid transport

• Micro-fuel cells

• Thermal aspects of biological systems

• Thermal radiation

Machine Design Engineering

• Acoustics

• Active Materials

• Composites

• Dynamics and Vibrations

• Finite Element Method and Analysis

• Fracture Mechanics and Design

• Mechatronics

• Micromechanics

• Nanocomposites

• Rolling Element Bearings Design and Analysis

• Smart Structures

• Tribology

Manufacturing Engineering

• Bio-MEMS

• Casting

• CAD/CAM/CIM

• Coating

• Composites

• Computer Application in Metal Forming

• Design and Manufacturing

• Electromagnetic pulse processing

• FEM, Neural Network

• Fuzzy Set Application

• Genetic Algorithms and Fuzzy logic in manufacturing

• Mechatronics

• Metal Forming

• Unconventional machining processes

• Welding of light weight metals

• Welding Process Monitoring and Control

6. Major initiatives and breakthrough in Research and Development during 1 April 2018 – 31 March 2019:

Design and procurement of equipment for GAIT Analysis Lab

of 44

7. Research Projects:

a) New Sponsored Projects (Total No: 14)

Principal

Investigator Name of Project

Sponsoring

Agency

Amount

Sanctioned

(Rs. in Lakh)

Co-Investigator Duration

Amaresh

Dalal

Analysis of flow transitions,

thermo-physical properties,

materials testing and heat

transfer coefficient in

Supercritical Steam based open

loop

DST under Clean

Energy Research

Initiatives

33.7 Prof. Gautam Biswas,

Dr. Dipankar N Basu 2023

Amaresh

Dalal

Development of Microbial Fuel

Cells and theoretical modeling

on the multiple effect of flow-

materials in waste water bio-

energy reactor

GITA-DST 42.96

Prof. Gautam Biswas,

Dr. Vimal Katiyar, Dr.

Chandan Mukherjee

2021

S Kanagaraj

and S K

Dwivedy

North East Centre for Biological

sciences and Healthcare

Engineering (NECBH)

DBT 3735.28

Prof. R. Swaminathan,

Prof. S. Dandapat, Prof.

Ashish Anand, HOD

BSBE and HD

Chemsitry, Dean R&D,

Associat Dean R&D

3 years

S Senthilvelan

Feasibiliy Evaluation of Powder

Metallurgy Connecting Rod for

Automotive Applications

DST 47.65 Prof P S Robi 2 years

Manas Das

Fabrication of Prosthetic

Implants and further

Nanofinishing Using Magnetic

Field Assisted Finishing (MFAF)

Process

SERB, DST 47.68 3 years

S Kanagaraj

Indigenous development of a

suture mediated vascular closure

device for closure of arterial

access site to achieve instant

hemostasis following catheter

angiography and interventions

DBT 34.264

Dr.Ganesh Narayanan

IITG, Dr. Akash

Handique, Dr. Amit

Malviya, Dr.Prajal Saikia

NEIGRIHMS and

Dr.Bhupen Sarma CVS

2 years

S Kanagaraj

Development of new generation

Acetabular Socket Linear and

Femoral Head Prototypes with

unique 3D microstructures and

better fracture resistance for

Osteoporosis and Osteoarthritis

treatment

IMRPINT,

MHRD 30.26

Prof. Bikramjit Basu,

IISc, Prof. S.

Senthilvelan, IITG, Prof.

K. Balani, IITK,

Prof. Alok Dhawan,

IITR, Mr. R. Joseph

Bensingh, CIPET

3 years

S Kanagaraj

An affordable lower limb

prosthesis with polycentric knee

joint, dynamic ankle joint and

suction-suspension socket

system having advanced features

IMRPINT,

MHRD 73.37 Prof. Nelson Muthu 3 years

Dipankar N

Basu

Experimental & computational

analyses of flow-induced heat

transfer deterioration in

supercritical natural circulation

loop

DERB, DST 47.26 3 years

Ganesh

Narayanan NewGen IEDC DST S. K. Dwivedy

Prof P

Muthukumar

Metal hydride materials and

systems for the increase of

efficiency in renewable and

hydrogen energy

BRICS

Multilateral

Research and

Development

Projects, DST

36 Dr Pankaj Kalita 3 years

of 44

Prof P

Muthukumar

DST – IIT Bombay Energy

Storage Platform on Hydrogen SERB, DST 170 5 years

Prof P

Muthukumar

Reversible Alkali Metal Based

Hydrides for High Temperature

Thermal Energy Storage

MES, DST 76 3 years

Nelson Muthu

Computational and Experimental

study of damage and failure in

carbon/glass fiber reinforced

composite materials


b) Ongoing Sponsored Projects (Total No: 11)

Principal


Sponsoring

Agency

Amount

Sanctioned

(Rs. in Lakh)


Amaresh

Dalal

Development of a General Purpose CFD

Solver over a Hybrid Unstructured Grid BRNS-DAE 300.88

Dr. Ganesh

Natarajan, Dr. Nanda

Kishore

2019

S

Senthilvelan

Manufacturing Solutions for the

Preparation of Siddha Medicines

(Traditional Medicines Originated from

Tamilnadu)

MHRD

IMPRINT 57.98

Dr S Kanagaraj

Prof P S Robi

Prof . Kannan

Pakshirajan

Prof G Pugazhenthi

Indian Institute of

Technology

Guwahati

Prof R

Gnanamoorthy

Professor , Indian

Institute of

Technology Madras

Dr P Selva

Shanmugam( MD

Siddha), PhD

Siddha Consultant

Physician,

Dr J Raamachandran

(Retd.) Professor

Indian Institute of

Technology Madras

Prof R A Kalaivani

Vels University

Chennai 600117

Sachin Singh

Gautam

Development of A Nonlinear Finite

Element Based Framework for Elasto-

plastic Contact Problems

VSSC,

ISRO 12.5 2 Years

Sachin Singh

Gautam

Numerical Methods For Dynamic

Analysis of Adhesive Contact Problems SERB, DST 32.26 3 Years

Vinayak

Kulkarni

Compressible Flow solver with Immersed

Boundary Approach

Respond,

ISRO 16.32

Niranjan Sahoo and

Ganesh Natarajan 1 year

Poonam

Kumari

Analytical solution for boundary layer

stresses in piezoelectric plates with

longitudinally functionally graded

materials


Prof P

Muthukumar

Development of High Temperature

Thermal Energy Storage System for Solar

Thermal Power Plant

SERB, DST 150 Dr R Anandalakshmi,

Chemical Engg 3 years

Prof P

Muthukumar

Design and development of energy

efficient and environment friendly LPG

and Kerosene cooking stoves with Porous

Radiant Burners for household and large-

scale cooking applications

IMRPINT,

MHRD 160 3 years

of 44

Prof P

Muthukumar

Design, development and demonstration

of indigenous hydrogen storage and fuel

cell system for mobile and stationary

applications of 5 kW capacity

IMRPINT,

MHRD 48 3 years

Pranab K

Mondal

Experimental investigation on the

roughness-surface wettability coupling in

capillary filling in microchannel

SERB, DST 66.07 Prof. Gautam Biswas 3 years

Manmohan

Pandey

Investigations on Hydroodynamics, Flow

Regimes and Heat Transfer

Characteristics of Flow Boiling in Mini-

and Microchannels

SERB, DST 59

Prof. Anugrah Singh

(Chemical

Engineering)

3 years

c) Completed Sponsored Projects (Total No:……)

Principal

Investigator

Name of

Project

Sponsoring

Agency

Amount Sanctioned (Rs. in

Lakh)

Co-

Investigator Duration

8. Consultancy (Total No: 3)

Principal


Sponsoring

Agency

Amount

Sanctioned

(Rs. in Lakh)


S Kanagaraj

Design of a Food

Ecology System (FES)

for Pig feed

GNRC Limited 11.68

Prof.S.K.Dwivedy, Prof.P.S.Robi ,

Prof.P. Muthukumar, Prof. R.

Ganesh Narayanan, Prof. Poonam

Kumari, Prof. Deepak Sharma

6

months

Prof P

Muthukumar

Design and

development of metal

hydride based

hydrogen purification

system:

NTPC Ltd 20.2 2 years

Nelson Muthu Training on Creep and

Thermal Fatigue

FCA

Engineering

Pvt. India Ltd.

2.301 2 days

9. Research Publications

International and National Journal (PERIOD: 1 APRIL 2018 – 31 MARCH 2019)

Total No. of International Journal: ………………………….

Total No. of National Journal: ………………………………. 137 nos.

Format for submission of Research Publications/Journals

Sl.

No. Authors Paper Title Journal Name Year Volume

Issue

Number

(If any)

Starting

Page

Ending

Page

1

Nath, B.,

Biswas, G., and

Dalal, A.

Influence of electric field on

deformation of a drop in shear flow

Physics of Fluids 2019 31 4 042102-

1

042102-

13

2

Deka, H.,

Biswas, G., Sahu

K.C., Kulkarni,

Y., and Dalal, A.

Coalescence Dynamics of a

Compound Drop on a Deep Liquid

Pool

Journal of Fluid

Mechanics

2019 866 R2-1 R2-11

3

Deka, H., Tsai,

P-H, Biswas, G.,

Dalal, A., Ray,

B., and Wang,

A-B.

Dynamics of Formation and

Oscillation of Non-spherical Drops

Chemical

Engineering

Science

2019 201 413 423

4

Deka, H.,

Biswas, G.,

Chakraborty, S.,

and Dalal, A.

Coalescence Dynamics of Unequal

Sized Drop

Physics of Fluids 2019 31 012105-

1

012105-

17

of 44

5

Bhardwaj, S.,

Dalal, A., and

Mukherjee, P. P.

Mesoscale Understanding of

Capillarity Driven Two-phase Flow

in a Packed Bed Architecture

International

Journal of Heat and

Mass Transfer

2019 136 116 127

6

Parmananda, M.,

Dalal, A., and

Natarajan, G.

Numerical appraisal of three low

Mach number algorithms for

radiative-convective flows in

enclosures

Computers and

Mathematics with

Applications

2019 77 8 2162 2181

7

Manik, J., Dalal,

A., and

Natarajan, G.

A Parametric Study on the Droplet

Detachment Process from the

Ceiling Under the Effect of Gravity

Engineering

Computations

2019 36 2 445 465

8

Randive, P.,

Dalal, A., and

Mukherjee, P.

Probing the Influence of

Confinement and Wettability on

Droplet Displacement Behavior: A

Mesoscale Analysis

European Journal

of Mechanics,

B/Fluids

2019 75 327 338

9

Nath, B., Raza,

A., Sethi, V.,

Dalal, A.,

Ghosh, S., and

Biswas, G.

Understanding Flow Dynamics,

Viability and Metastatic Potency of

Cervical Cancer (HeLa) Cells

Through Constricted Microchannels

Scientific Reports 2018 8 17357-1 17357-

10

10

Bhardwaj, S.,

Dalal, A.,

Mukherjee, P. P.,

and Biswas, G.

Analysis of Droplet Dynamics in a

Partially Obstructed Confinement in

a Three-dimensional Channel


1

102102-

14

11

Pandey, V.,

Biswas, G., and

Dalal, A.

Effect of Surface Wettability and

Electric Field on Transition of Film

Boiling to Nucleate Boiling

Numerical Heat

Transfer, Part A

2018 74 3 1105 1120

12

Pandey, V.,

Biswas, G.,

Dalal, A., and

Welch, S.W.J.

Bubble Lifecycle During

Heterogeneous Nucleate Boiling

ASME Journal of

Heat Transfer

2018 140 12 121503-

1

121503-

17

13

Parmananda, M.,

Thirumalaisamy,

R., Dalal, A.,

and Natarajan,

G.

Investigations of Turbulence-

radiation Interaction in Non-

Oberbeck-Boussinesq Buoyancy-

driven Flows

International

Journal of Thermal

Sciences

2018 134 298 316

14

Bhardwaj, S.,

and Dalal, A.

Sweeping of the Entrapped Fluid

out of the Groove in a Three-

dimensional Channel Using Lattice

Boltzmann Method

European Journal

of Mechanics,

B/Fluids

2018 2 328 339

15

Kotoky, S.,

Dalal, A., and

Natarajan, G.

Effects of Specularity and Particle-

particle Restitution Coefficients on

the Recirculation Characteristics of

Dispersed Gas-particle Flows

Through a Sudden Expansion

Advanced Powder

Technology

2018 29 10 2463 2475

16

Borgohain, P.,

Arumughan, J.,

Dalal, A., and

Natarajan, G.

Design and Performance of a Three-

dimensional Micromixer with

Curved Ribs

Chemical

Engineering

Research and

Design

2018 136 761 775

17

Parmananda, M.,

Dalal, A., and

Natarajan, G.

Unified Framework for Buoyancy

Induced Radiative-convective Flow

and Heat Transfer on Hybrid

Unstructured Meshes

International

Journal of Heat and

Mass Transfer

2018 126 908 925

18

Nath, B.,

Biswas, G.,

Dalal, A., and

Sahu, K. C.

Cross-stream Migration of Drops

Suspended in Poiseuille Flow in the

Presence of an Electric Field

Physical Review E 2018 97 63106-1 63106-

13

of 44

19

Manik, J., Dalal,

A., and

Natarajan, G.

A Generic Algorithm for Three-

dimensional Multi-phase Flows on

Unstructured Meshes

International

Journal of

Multiphase Flow

2018 106 228 242

20

Thirumalaisamy,

R., Natarajan,

G., and Dalal, A.

A Charge-conservative Approach

for Simulating

Electrohydrodynamic Two-phase

Flows Using Volume-of-fluid

Journal of

Computational

Physics

2018 230 5 1939 1955

21

Deka, H., Ray,

B., Biswas, G.,

Dalal, A.

Dynamics of Tongue Shaped Cavity

Generated During the Impact of

High-speed Microdrops

Physics of Fluids 2018 30 42103-1 42103-

14

22

Randive, P.,

Dalal, A., and

Mukherjee, P. P.

Mesoscopic Modeling of

Capillarity-induced Two-phase

Transport in a Microfluidic Porous

Structure

Transport in

Porous Media

2018 122 3 673 691

23

Borgohain, P.,

Choudhary, D.,

Dalal, A., and

Natarajan, G.

Numerical Investigation of Mixing

Enhancement for Multi-species

Flows in Wavy Channels

Chemical

Engineering &

Processing:

Process

Intensification

2018 127 191 205

24

Arnab Kr. De A diffuse interface immersed

boundary method for complex

moving boundary problems

Journal of

Computational

Physics

2018 366 226 251

25

Arnab Kr. De, V.

Eswaran, P. K.

Mishra

Dynamics of plumes in turbulent

Rayleigh-Benard convection

European Journal

of Mechanics -

B/Fluids

2018 72 164 178

26

Arup Nandy, C.

S. Jog

Conservation Properties of the

Trapezoidal Rule for Linear

Transient Electromagnetics

Journal of

Advances in

Mathematics and

Computer Science

2018 26 4 1 26

27

Arup Nandy, C.

S. Jog

A monolithic finite-element

formulation for

magnetohydrodynamics

Sadhana: Indian

Academy of

Sciences

2018 43 151

28

Nada Barakat

and Deepak

Sharma

Modeling and Bi-Objective

Optimization of Soil Cutting and

Pushing Process for Bulldozer and

its Blade

Journal of The

Institution of

Engineers (India):

Series C

2019 100 1 129 143

29

Deepak Sharma

and Nada

Barakat

Evolutionary Bi-Objective

Optimization for Bulldozer and its

Blade in Soil Cutting

Journal of The

Institution of

Engineers (India):

Series C

2019 100 2 295 310

30

V. Pandey, G.

Biswas and A.

Dalal

Effect of surface wettability and

electric field on transition of film

boiling to nucleate boiling

Numerical Heat

Transfer, Part A

2018 74 1105 1120

31

S. Bhardwaj, A.

Dalal, G. Biswas

and P. P.

Mukherjee

Analysis of droplet dynamics in a

partially obstructed confinement in

a three-dimensional Channel


1

102102-

14

32

V. Pandey, G.

Biswas, A. Dalal

and S.W.J.

Welch

Bubble Lifecycle During

Heterogeneous Nucleate Boiling

Journal of Heat

Transfer (ASME)

2018 140 121503-

1

121503-

17

33

B. Nath, G.

Biswas, A.

Dalal, and K. C.

Sahu

Cross-stream migration of drops

suspended in Poiseuille flow in the

presence of an electric field

Physical Review E 2018 97 063106-

1

063106-

13

of 44

34

M.P. Borthakur,

D.

Bandyopadhyay

and G. Biswas

Electric field mediated separation of

water–ethanol mixtures in carbon

nanotubes integrated in nanoporous

graphene membranes

Faraday Discuss 2018 209 259 271

35

M. P. Borthakur,

G. Biswas and

D.

Bandyopadhyay

Dynamics of drop formation from

submerged orifices under the

influence of electric field

Physics of Fluids 2018 30 1 11

36

M. P. Borthakur,

G. Biswas and

D.

Bandyopadhyay

Dynamics of an arched liquid jet

under the influence of gravity

European Journal

of Mechanics / B

Fluids

2018 74 1 9

37

S. Sajith,

K.S.R.K. Murthy

and P.S. Robi

A simple technique for estimation

of mixed mode (I/II) stress intensity

factors.

Journal of

Mechanics of

Materials and

Structures

2018 13 141 154

38

S. Sajith,

K.S.R.K. Murthy

and P.S. Robi

Prediction of accurate mixed mode

fatigue crack growth curves using

the Paris’ law.

Journal of The

Institution of

Engineers (India):

Series C.

2019 100 1 165 174

39

M.K. Hussian

and K.S.R.K.

Murthy

A point substitution displacement

technique for estimation of elastic

notch stress intensities of sharp V-

notched bodies

Theoretical and

Applied Fracture

Mechanics

2018 97 87 97

40

P. Paul,

K.S.R.K. Murthy

and D.

Chakraborty

A strain gage technique for mode I

notch stress intensity factor of sharp

Vnotched configurations

Theoretical and

Applied Fracture

Mechanics

2018 94 57 90

41

K. Saikia, M.

Pandey, D.N.

Basu

Numerical investigation of the

effect of inlet subcooling on flow

instabilities in a parallel channel

natural circulation boiling system

Nuclear

Engineering and

Design

2019 114 13 21

42

A. Iqbal, M.

Pandey

Effect of local thermophysical

propertiesand flashing on ow

boiling pressure drop in

microchannels

International

Journal of

Multiphase Flow

2018 106 311 324

43

A. Iqbal, M.

Pandey

A simple methodology to

incorporateflashing and variation of

thermophysical properties for flow

boilingpressure drop in a

microchannel

International

Journal of Thermal

Sciences

2018 132 137 145

44

S. Singh, D.

Kumar, M. Ravi

Sankar, K.

Rajurkar

Nanofinishing of Microslots on

Surgical Stainless Steel by Abrasive

Flow Finishing Process:

Experimentation and Modeling

ASME Journal of

Micro-Nano

Manufacturing

2018 6 2 21005-1 21005-

12

45

K.K. Gajrani,

M.R. Sankar and

U.S. Dixit

Environmentally friendly machining

with MoS2 filled mechnaically

micro-textured cutting tools

Journal of

Mechnical Science

and Technology

2018 32 8 3797 3805

46

K.K. Gajrani, S.

Suresh and M.R.

Sankar

Environmental friendly hard

machining performance of uncoated

and MoS2 coated mechanical

micro-textured tungsten carbide

cutting tools

Tribology

International

2018 125 141 155

47

Apurba Das,

Anil Kumar

Chikkala, Gyan

Effect of Thickness on Optical and

Microwave Dielectric Properties of

Journal of Alloys

and Compounds

2018 739 729 736

of 44

Prakash Bharti,

Rasmi Ranjan

Behera, M. Ravi

Sankar, Alika

Khare, Pamu

Dobbidi

Hydroxiapetite Films Deposited by

RF Magnetron Sputtering

48

Rasmi Ranjan

Behera, A. Das,

D. Pamu, L.M.

Pandey, M. Ravi

Sankar

Mechano-tribological properties and

in vitro bioactivity of biphasic

calcuim phosphate coating on Ti-

6Al-4V

Journal of the

Mechanical

Behavior of

Biomedical

Materials

2018 86 143 157

49

Anwesa Barman,

Manas Das

Nano-finishing of bio-titanium alloy

to generate different surface

morphologies by changing

Magnetorheological polishing fluid

compositions

Precision

Engineering

2018 51 145 152

50

Anwesa Barman,

Manas Das

Simulation and experimental

investigation of finishing forces in

magnetic field assisted finishing

process

Journal of

Materials and

Manufacturing

Processes

2018 133 11 1223 1232

51

Chandan Kumar,

Manas Das, C.P.

Paul, K.S.

Bindra

Characteristics of fiber laser

weldments of two phases (α+β)

titanium alloy

Journal of

Manufacturing

Processes

2018 35 351 359

52

Chandan Kumar,

Manas Das, C.P.

Paul, K.S.

Bindra

Comparison of bead shape,

microstructure and mechanical

properties of fiber laser beam

welding of 2 mm thick plates of Ti-

6Al-4V alloy

Optics and Laser

Technology

2018 105 306 321

53

P. Dinesh, M.R.

Behera, P.G.

Ranjith, N.

Muthu

An element-free Galerkin method

using vertically averaged

multiphase flow model for carbon

sequestration

Computers and

Geotechnics

2018 105 195 210

54

S. Brahmachary,

G. Natarajan and

N. Sahoo

On maximum ballistic coefficient

axisymmetric geometries in

hypersonic flows

Journal of

Spacecraft and

Rockets

2018 55 518 522

55

S. Brahmachary,

G. Natarajan, V.

Kulkarni and N.

Sahoo

A sharp‐interface immersed

boundary framework for

simulations of high‐speed inviscid

compressible flows

International

Journal of

Numerical

Methods in Fluids

2018 86 770 791

56

N. Sahoo, V.

Kulkarni and R.

K. Peetala

Conjugate heat transfer study in

hypersonic flows

Journal of the

Institution of

Engineers (India):

Series C

2018 99 2 151 158

57

S. Agarwal and

N. Sahoo

An experimental investigation

towards calibration of a shock tube

and stagnation heat flux

determination

International

Journal of

Aerodynamics

2018 6 1 18 40

58

S. Pandian, S. L.

N. Desikan and

N. Sahoo

Experimental investigation of

starting characteristics and wave

propagation from a shallow open

cavity and its acoustic emission at

supersonic speed

Physics of Fluids 2018 30 16104-1 16104-

11

59

Vigneshwaran

K, Gurpreet

Singh Sodhi,

Experimental investigation of a

Cast-Steel based Thermal Energy

Storage System, Energy Procedia

Energy Procedia 2018 176 627

of 44

Muthukumar P,

Arvind VK,

Balamurugan G,

Sriram S,

Senthilmurugan

S

60

B Kiran Naik, P

Muthukumar, P

Sunil Kumar

A novel finite difference model

coupled with recursive algorithm

for analyzing heat and mass transfer

processes in a cross flow

dehumidifier/regenerator

International

Journal of Thermal

Sciences

2018 131 1

61

P Muthukumar,

Alok Kumar,

Nithin N Raju, K

Malleswararao,

Muhammad M

Rahman

A critical review on design aspects

and developmental status of metal

hydride based thermal machines

International

Journal of

Hydrogen Energy

2018 43 37 17753

62

Lav Kumar

Kaushik, P

Muthukumar

Life cycle Assessment (LCA) and

Techno-economic Assessment

(TEA) of medium scale (5–10 kW)

LPG cooking stove with two-layer

porous radiant burner

Applied Thermal

Engineering

2018 133 316

63

Niraj Kumar

Mishra, P

Muthukumar,

Snehasish

Panigrahy

A Review on Clean Combustion

Within Porous Media

Air Pollution and

Control

2018 209

64

S. Shyam, B.

Mehta, P. K.

Mondal, S.

Wongwises

Investigation into the thermo-

hydrodynamics of ferrofluid flow

under the influence of constant and

alternating magnetic field by

InfraRed Thermography

International

Journal of Heat and

Mass Transfer

2019 135 1233 17779

65

P. Kaushik, P. K.

Mondal, P. K.

Kundu, S.

Wongwises

Rotating electroosmotic flow

through a polyelectrolyte-grafted

microchannel: An analytical

solution

Physics of Fluids 2019 31 2 22009 18

66

H. Gaikwad, P.

Baghel, R.

Sarma, P. K.

Mondal

Transport of neutral solutes in a

viscoelastic solvent through a

porous microchannel

Physics of Fluids 2019 31 2 22006 34

67

S. Dutta, P. K.

Mondal, P.

Goswami

Slipping hydrodynamics of Powell-

Eyring fluid in a cylindrical

microchannel under electrical

double layer phenomenon

Physica Scripta 2019 94 2 25002 326

68

A. Gogoi, K.

Anki Reddy, P.

K. Mondal

Multilayer Graphene Oxide

Membrane in Forward Osmosis:

Molecular Insights

ACS Applied Nano

Materials

2018 1 9 4450 224

69

R. Sarma, N.

Deka, K. Sarma,

P. K. Mondal

Electroosmotic flow of Phan-

Thien–Tanner fluids at high zeta

potentials: An exact analytical

solution


70

G. Kunti, P. K.

Mondal, A.

Bhattacharya, S.

Chakraborty

Electrothermally modulated contact

line dynamics of a binary fluid in a

patterned fluidic environment


of 44

71

P. K. Mondal, S.

Chaudhry

Effects of gravity on the thermo-

hydrodynamics of moving contact

lines


72

H. S. Gaikwad,

P. K. Mondal,

S.Wongwises

Softness induced enhancement in

net throughput of non linear bio

fluids in nanofluidic channel under

EDL phenomena

Scientific Reports -

Nature

2018 8 1 7893-1

73

H. S. Gaikwad,

A. Roy, P. K.

Mondal, N.

Chimres, S.

Wongwises

Irreversibility analysis in a slip

aided electroosmotic flow through

an asymmetrically heated

microchannel: The effects of joule

heating and the conjugate heat

transfer

Analytica Chimica

Acta

2018 1045 85

74

A. Mukherjee, P.

K. Mondal

Analysis of Heat Transfer Through

Optically Participating Medium in a

Concentric Spherical Enclosure:

The Role of Dual-Phase-Lag

Conduction and Radiation

Journal of Thermal

Science and

Engineering

Applications

2018 10 4 41022

75

R. Sarma, A.

Nath, T.

Konwar, P. K.

Mondal, S.

Wongwises

Thermo-hydrodynamics of a

viscoelastic fluid under

asymmetrical heating

International

Journal of Heat and

Mass Transfer

2018 125 515

76

Purnendu Kumar

Mandal, P.S.

Robi,

Influence of micro-alloying with

silver on microstructure and

mechanical Properties of Al-Cu

alloy

Materials Science

and Engineering A.

2018 A722 1 99

77

D. G. Gunjo, P.

Mahanta and P.

S. Robi

Melting enhancement of a latent

heat storage with dispersed Cu,

CuO and Al2O3 nanoparticles for

solar thermal applications

Renewable Energy.

121C (2018)pp:

652-665.

2018 121 652

78

S. Behera, P.

Kumari

Free Vibration of Levy-type

Rectangular Laminated Plates using

Efficient Zig-Zag Theory

Advances in

Computational

Design

2018 3 213

79

Poonam Kumari,

Shranish Kar

Static behavior of arbitrarily

supported composite laminated

cylindrical shell panels: An

analytical 3D elasticity approach

Composite

Structures

2019 207 949 043105-

13

80

Agyapal Singh,

Poonam Kumari,

and Rupam

Hazarika

Analytical Solution for Bending

Analysis of Axially Functionally

Graded Angle-Ply Flat Panels

Mathematical

Problems in

Engineering

2018 ID

259748

4

1

81

Sandeep Singh,

R. Tiwari

Model Based Identification of

Crack and Bearing Dynamic

Parameters In Flexible Rotor

Systems Supported with an

Auxillary Active Magnetic Bearing

Mechanisn and

Machine Theory

2018 122 https://d

oi.org/1

0.1016/j

.mechm

achtheo

ry.2018.

01.006

292 524

82

P. Gangsar, R.

Tiwari

Multi-fault Diagnosis of Induction

Motor at Intermediate Operating

Conditions using Wavelet Packet

Transform and Support Vector

Machine

ASME, Journal of

Dynamic Systems,

Measurement and

Control

2018 140 8 50-18

83

J. S. Rapur, R.

Tiwari

Automation of Multi-Fault

Diagnosing of Centrifugal Pumps

Journal of the

Brazilian Society

2018 40 https://d

oi.org/1

278 111

of 44

using Multi-Class Support Vector

Machine with Vibration and Motor-

Current Signals in Frequency

Domain

of Mechanical

Sciences and

Engineering

(BMSE)

0.1007/

s40430-

018-

1202-9

84

R. S. Srinivas, R.

Tiwari and Ch.

K. Babu

Application of Active Magnetic

Bearings in Flexible Rotordynamic

Systems - A State-of-the-Art

Review

Mechanical

Systems and Signal

Processing

2018 106 537 665

85

A. Panda, J. S.

Rapur and R.

Tiwari

Prediction of Flow Blockages and

Impending Cavitation in Centrifugal

Pumps using Support Vector

Machine (SVM) Algorithms Based

on Vibration Measurements

Measurement 2018 130 44

86

P. Gangsar and

R. Tiwari

A Support Vector Machine based

Fault Diagnostics of Induction

Motors for Practical Situation of

Multi-Sensor Limited Data Case

Measurement


87

Arnab Chanda

and S. K.

Dwivedy

Nonlinear dynamic analysis of

flexible workpiece and tool in

turning operation with delay and

internal resonance

Journal of Sound

and Vibration

2018 434 358 17

88

Devarshi

Kashyap, P.

Kishore Kumar,

and S. Kanagaraj

4D printed porous radiopaque shape

memory polyurethane for

endovascular embolization

Additive

Manufacturing

2018 24 687

89

R. Vignesh

Babu, S.

Kanagaraj

Thermal, electrical and mechanical

characterization of microwave

sintered Copper/carbon nanotubes

(CNT) composites against sintering

duration, CNT diameter and its

concentration

Journal of

Materials

Processing Tech

2018 258 296 298

90

R. Vignesh

Babu, Avanish

Verma Kunwar,

M. Charan, S.

Kanagaraj

Tweaking the diameter and

concentration of carbon nanotubes

and sintering duration in Copper

based composites for heat transfer

applications

Advanced Powder

Technology

2018 29 2356 572

91

S Pushp, A

Saikia, A Khan,

SM Hazarika

A cognitively enhanced

collaborative control architecture

for an intelligent wheelchair:

Formalization, implementation and

evaluation

Cognitive Systems

Research

2018 49 114

92

R Bhattacharyya,

SM Hazarika

Object affordance driven inverse

reinforcement learning through

conceptual abstraction and advice

Paladyn Journal of

Behavioral

Robotics

2018 9 1 277 56

93

U Talukdar, SM

Hazarika, JQ

Gan

A Kernel Partial least square based

feature selection method

Pattern

Recognition

2018 83 91

94

U Talukdar, SM

Hazarika, JQ

Gan

Motor imagery and mental fatigue:

inter-relationship and EEG based

estimation

Journal of

computational

neuroscience

2019 46 1 55 711

95

Dipankar Bora,

Manoj Kumar,

Sachin Singh

Gautam

Ductile fracture at high velocity

impact of cylindrical tubes

Materials Today:

Proceedings

2018 5 18983 309

of 44

96

S. Panda, A

Kumar

A design of active constrained layer

damping treatment for vibration

control of circular cylindrical shell

structure

Journal of

Vibration and

Control

2018 24 24 5811 2367

97

A Kumar, S

Panda, V

Narsaria, A

Kumar

Augmented constrained layer

damping in plates through the

optimal design of a 0-3 viscoelastic

composite layer.

Journal of

Vibration and

Control

2018 24 23 5514 127

98

A Kumar, S

Panda, A Kumar,

V Narsaria

Performance of a graphite wafer-

reinforced viscoelastic composite

layer for active-passive damping of

plate vibration

Compoiste

Structures

2018 186 303 294

99

Manish Kumar

Dubey and

Satyajit Panda

Electromechanical properties and

actuation capability of an extension

mode piezoelectric fiber composite

actuator with cylindrically periodic

microstructure

Archive of Applied

Mechanics

2018 88 2261 106

100

Singh S. S.,

Baruah P. K.,

Khare A. and

Joshi S. N.

Incubation studies and the threshold

for surface damage and cavity

formation in the processing of

polycarbonate by Nd:YAG laser

Optics and Laser

Technology

2018 108 592

101

N Devarani, SN

Joshi

Surface Alloying of Ti-6Al-4V on

P20 Mold Steel using Electric

Discharge Processing (EDP)

Materials Today:

Proceedings

2018 5 2 8523

102

G Bolar, M

Mekonen, A

Das, SN Joshi

Experimental Investigation on

Surface Quality and Dimensional

Accuracy during Curvilinear Thin-

Wall Machining

Materials Today:

Proceedings

2018 5 2 6461

103

G Bolar, A Das,

SN Joshi

Measurement and analysis of

cutting force and product surface

quality during end-milling of thin-

wall components


104

R. Kant and S N

Joshi

Numerical investigations into

influence of scanning path curvature

on deformation behavior during

curvilinear laser bending of

magnesium sheets

Journal of Thermal

Stresses

2018 41 3 313 18991

105

SS Singh, PK

Baruah, A

Khare, SN Joshi

Effect of laser beam conditioning

on fabrication of clean micro-

channel on stainless steel 316L

using second harmonic of Q-

switched Nd: YAG laser

Optics and Laser

Technology

2018 99 107 5841

106

Bipul Das,

Sukhomay Pal,

Swarup Bag

Monitoring of friction stir welding

process using main spindle motor

current

Journal of The

Institution of

Engineers (India):

Series C

2018 99 6 711

107

R. Shufen and

U.S. Dixit

A review of theoretical and

experimental research on various

autofrettage processes

ASME Journal of

Pressure Vessel

Technology

2018 140 5 8531

108

R. Shufen and

U.S. Dixit

A review of theoretical and

experimental research on various

autofrettage processes

ASME Journal of

Pressure Vessel

Technology

2018 140 5 50802-1 287

109

U.S. Dixit, V.

Yadav, R.G.

Naryanan and N.

Bhardwaj

Friction in micromanufacturing: a

review

Journal of

Micromanufacturin

g

2018 1 1 76 716

of 44

110

K.K. Gajrani,

M.R. Sankar and

U.S. Dixit

Environmentally friendly machining

with MoS2 filled mechnaically

micro-textured cutting tools

Journal of

Mechnical Science

and Technology

2018 32 8 3797

111

P.P. Dutta, K.

Kalita and U.S.

Dixit

Electromagnetic-force-assisted

bending and striaghtening of AH36

steel strip by laser irradaition

Lasers in

Manufacturing and

Materials

Processing

2018 5 3 201 300

112

R. Shufen and

U.S. Dixit

An analysis of thermal autofrettage

process with heat treatment

International

Journal of

Mechanical

Sciences

2018 144 134 226

113

V. Kumar and

U.S. Dixit

A model for the estimation of

hardness of laser bent strips

Optics and Laser

Technology

2018 107 491 16

114

A. Bisht, V.

Yadav, S. Suwas

and U.S. Dixit

Deformation behavior of AM30

magnesium alloy

Journal of

Materials

Engineering and

Performance

2018 27 9 4900 6550

115

N. Alom and U.

K. Saha

Influence of blade profiles on

Savonius rotor performance:

Numerical simulation and

experimental validation

Energy Conversion

and Management

2019 186 267 50802-

15

116

N. Alom and U.

K. Saha

Evolution and progress in the

development of Savonius wind

turbine rotor blade profiles and

shapes

ASME Journal of

Solar Energy

Engineering

2019 141 6 030801-

15

91

117

N. Alom and U.

K. Saha

Examining the aerodynamic drag

and lift characteristics of a newly

developed elliptical-bladed

Savonius rotor

ASME Journal of

Energy Resources

Technology

2018 141 5 051201-

12

118

N. Alom and U.

K. Saha

An insight into the drag and lift

characteristics of modified Bach

and Benesh profiles of Savonius

wind rotor

Energy Prodedia 2018 144 50 221

119

A. Sarkar and U.

K. Saha

A critique on the research activities

and potential benefits of dual fuel

diesel engine run on biogas and

biofuel-blended biodiesel

ASME Journal of

Engineering for

Gas Turbines and

Power

2019 141 6 14

120

A. Sarkar and U.

K. Saha

Role of global fuel-air equivalence

ratio and preheating on the behavior

of biogas fueled diesel engine under

dual fuel mode

Fuel 2018 232 743 145

121

P. K. Talukdar,

V. Kulkarni and

U. K. Saha

Performance estimation of Savonius

wind and Savonius hydrokinetic

turbines under identical power input

AIP Journal of

Renewable and

Sustainable Energy

Reviews

2018 10 5 064704-

1

277

122

P. K. Talukdar,

V. Kulkarni and

U. K. Saha

Field testing of model helical-

bladed hydrokinetic turbine for

small-scale power generation

Renewable Energy 2018 127 158

123

A. Zayoud, P.

Mahanta and U.

K. Saha

A Novel method of pure oxy-fuel

circulating fluidized bed

combustion with zero recirculation

flue gas – Experimental validation

Materials Today:

Proceedings

2018 5 50 050801-

14

124

Ashish J.

Chaudhari,

Vinayak

State-of-the-art technology in

variable compression ratio

Sadhana 2018 43 211 090801-

26

of 44

Kulkarni and

Niranjan Sahoo

mechanism for spark ignition

engine

125

Hotta, S.K.,

Sahoo, N.,

Mohanty, K. and

Mahanta, P.

Effect of Compression Ratio on the

Performance of a Constant Speed

Spark Ignition Engine Operating on

Raw Biogas

Journal of Energy

and Environmental

Sustainability

2018 5 53 754

126

Hotta, S.K.,

Sahoo, N.,

Mohanty, K. and

Mahanta, P.

Effect of Compression Ratio on the

Performance of a Constant Speed

Spark Ignition Engine Operating on

Raw Biogas

Journal of Energy

and Environmental

Sustainability

2018 5 53 4018031

-13

127

Hotta, S.K.,

Sahoo, N. and

Mohanty, K.

Ignition Advancement Study for

Optimized Characteristics of a Raw

Biogas Operated Spark Ignition

Engine

Journal of green

energy

2018 16 1 101 064704-

15

128

Kumar, A.,

Singh, A.,

Kumar, A.,

Singh, M.K.,

Mahanta, P. and

Mukhopadhyay,

S.C.

Sensing Technologies for

Monitoring Intelligent Buildings: A

Review.

Bioresource

technology

2018 261 294 49

129

Gunjo, D.G.,

Jena, S.R.,

Mahanta, P. and

Robi, P.S.,

Melting enhancement of a latent

heat storage with dispersed Cu,

CuO and Al2O3 nanoparticles for

solar thermal application.

IEEE Sensors

Journal,

2018 18 12 4847 56

130

Deb, S., Tammi,

K., Kalita, K.

and Mahanta, P.,

Impact of Electric Vehicle Charging

Station Load on Distribution

Network.

Renewable Energy 2018 121 652 127

131

Zayoud, A.,

Mahanta, P. and

Saha, U.K.,

A Novel Method of Pure Oxy-fuel

Circulating Fluidized Bed

Combustion with Zero

Recirculation Flue Gas–

Experimental Validation.

Energies 2018 11 1 178

132

Deb, S., Tammi,

K., Kalita, K., &

Mahanta, P.

Review of recent trends in charging

infrastructure planning for electric

vehicles

Wiley

Interdisciplinary

Reviews: Energy

and Environment

2018 7 6

133

Kumar, G.,

Kalita, K.,

Tammi, K.

Analysis of Bridge Currents and

UMP of an Induction Machine With

Bridge Configured Winding Using

Coupled Field and Circuit Modeling

IEEE Transactions

on Magnetics

2018 54 9 57

134

Rakesh Bhadra,

Pardeep Pankaj,

Pankaj Biswas

and U. S. Dixit

Thermo-mechanical analysis of

CO2 Laser butt welding on AISI

304 steel thin plates

Internation Journal

of Steel Structures

2018 DOI

10.1007

/s13296

-018-

0085-

z,pp 1-

14

(accepte

d).

Februar

y 2019,

Volume

19,

Issue 1,

pp 14–

27

305

of 44

135

Arun Kadian &

Biswas Pankaj

The study of material flow

behaviour in dissimilar material

FSW of AA6061 and Cu-B370

alloys plates

Journal of

Manufacturing

Processes

2018 34, Part

A

4860

136

V. Kumar, U.S.

Dixit and J.

Zhang

Determination of thermal

conductivity, absorptivity and heat

transfer coefficient during Laser-

based manufacturing

Measurement 2019 131 January 319

137

V. Kumar, U.S.

Dixit and J.

Zhang

Determination of thermal

conductivity, specific heat capacity

and absorptivity during Laser-based

materials processing

Measurement 2019 139 June 213

Conference/Workshop/Seminar/Symposia (PERIOD: 1 APRIL 2018 – 31 MARCH 2019)

Total No. of papers published in Conference Proceedings: 122

Format for submission of papers published in Conference Proceedings

Sl.

No. Authors Paper Title

Name of Conference/ Workshop/

Seminar/ Symposia Proceedings Year

Starting

Page

Ending

Page

1

Deka, H., Biswas, G.,

and Dalal, A.,

Oscillation Dynamics of

Falling Drops”

Paper No. FMFP2018-148, Proceedings

of the 7th International and 45th National

Conference on Fluid Mechanics and Fluid

Power, December 10-12, 2018, Indian

Institute of Technology Bombay,

Mumbai, India

2018

2

Sarma, B., Basu, D.

N., and Dalal, A.,

“Universal Scaling Laws in

Drop-on-demand Generation

from A Yarn”

Paper No. FMFP2018-467, Proceedings

of the 7th International and 45th National


Power, December 10-12, 2018, Indian


Mumbai, India.

2018

3

Shahapure, V., Sarma,

B., Basu, D. N., and

Dalal, A.,

“High Speed Imaging and

Analysis of Drop Formation”

”, Paper No. FMFP2018-680,

Proceedings of the 7th International and

45th National Conference on Fluid

Mechanics and Fluid Power, December

10-12, 2018, Indian Institute of

Technology Bombay, Mumbai, India.

2018

4

Deka, H., Biswas, G.,

and Dalal, A.,

“A Coupled Level Set and

Volume-of-fluid Method for

Modelling Two-phase Flows”,

Paper No. IC-RIDME18: 194,

International Conference on Recent

Innovations and Developments in

Mechanical Engineering, National

Institute of Technology Meghalaya,

Shillong, India, November 8 – 10, 2018.

2018

5

Kotoky, S., Dalal, A.,

and Natarajan, G.,

2018

, “The Role of Particle

Diameter on the Fluidization

Behavior in a Bubbling Gas-

Solid Fluidized Bed”

”, Paper No. FMFP2018-680,



Mechanics and Fluid Power, December

10-12, 2018, Indian Institute of

Technology Bombay, Mumbai, India.

2018

6

Nath, B., Borthakur,

M.P., Biswas, G., and

Dalal, A.,

, “Influence of Electric Field

in the Lateral Migration of a

Drop Inside a Microchannel”

Paper No. IC-RIDME18: 245,






2018

7

Sarma, B., Pokhrel,

S., Kumar, S., Dalal,

“Prediction of Sauter Mean

Diameter of Spray During

”, Paper No. IC-RIDME18: 251,

International Conference on Recent 2018

of 44

A., Bandyopadhyay,

D., and Basu, D. N.

Electric Discharge Mediated

Bursting of a Droplet”





8

Parmananda, P.,

Dalal, A., and

Natarajan, G.

“Three-dimensional Analysis

of Non-Boussinesq Natural

Convection with Radiative

Heat Transfer in a Vertical

Seven Rod Bundle”

Paper No: IHTC16-23267, 16th

International Heat Transfer Conference,

Beijing, China.

2018

9

Dalal, A., Gupta, A.,

Gupta A., Mukherjee,

P.P.

“Modeling of Thermal

Management in Automotive

Battery Modules”

Paper No: 538, 4th International

Conference on Computational Methods

for Thermal Problems, Indian Institute of

Science, Bangalore, India.

2018

10

Chayanika Nath and

S. M. Hazarika

A Hybrid Visual Information

Representation and Reasoning

Paradigm Towards Video

Analysis.

, Lecture Notes in Computer Science, (To

Appear). Springer, June 18-22, 2018,

Edinburgh, UK.

2018

11

D.V.N. Lakshmi,

Muthukumar P

Design and development of

mixed mode forced

convection solar dryer for

drying of curcuma zeodaria

Presented at 12th International

Conference on Thermal Engineering:

Theory and Applications, February 23-

26, 2019, Gandhinagar, India

2019

12

Kiran Naik B and

Muthukumar P

Energy Exergy and Entransy

Analyses of an Air Cooled

Condenser Employed in a

Vapour Compression Chiller





2019

13

Sunku Prasad J,

Saurabh Dongare,

Anandalakshmi R,

Muthukumar P

Numerical Investigation of

PCM based Heat Sinks under

Constant and Variable Heat

Load Conditions





2019

14

Lakshmi DVN,

Apurba Layek,

Muthukumar, P

Evaluation of Convective Heat

Transfer Coefficient of Herbs

Dried in a Mixed Mode Solar

Dryer

. Presented at ICUE 2018 on: Green

Energy for Sustainable Development,

Phuket, Thailand, 24-26 Oct 2018

2018

15

Kaushik L K,

Muthukumar P

Experimental Analysis of a

Porous Radiant Pressurized

Cook Stove by Using a Blend

of Waste Cooking Oil (WCO)

and Kerosene

Presented at ICUE 2018 on: Green

Energy for Sustainable Development,

Phuket, Thailand, 24-26 Oct 2018

2018

16

Lav Kumar Kaushik,

Muthukumar P

Performance Assessment of a

Porous Radiant Cook Stove

Fueled with Blend of Waste

Vegetable Oil (WVO) and

Kerosene

Presented at The 10th International

Conference on Applied Energy

(ICAE2018), 22-25 August 2018, Hong

Kong

2018

17

Sangjukta Devi,

Niranjan Sahoo,

Muthukumar P

Combustion of biogas in

Porous Radiant Burner: Low

emission combustion

. Presented at The 10th International



Kong

2018

18

Gurpreet Singh Sodhi,

Vigneshwaran K,

Abhishek Kumar

Jaiswal, Muthukumar

P

Assessment of Heat Transfer

Characteristics of a Latent

Heat Thermal Energy Storage

System: Multi Tube Design

. Presented at The 10th International



Kong

2018

19

Nithin N. Raju,

Muthukumar P, K.

Malleswararao

Determination of Absorption

Conditions for LaNi4.7Al0.3

Based Hydrogen Storage

5th International Conference on

Computation Methods for Thermal

Problems (Thermacomp 2018),

Bangalore, India, July 9-11, 2018

2018

of 44

Device: A Numerical

Investigation

20

Gurpreet Singh Sodhi,

Muthukumar P

Effect of eccentricity on the

charging of a multi tube

Latent Heat Storage System

Presented at 5th International Conference

on Computational Methods for Thermal

Problems (THERMACOMP – 2018),

Indian Institute of Science, Bangalore,

July 9-11, 2018

2018

21

Mrinal Bhowmik,

Muthukumar P, R

Anandalakshmi

“Numerical Study on

Dehumidification

Performance of a Cross-Flow

Liquid Desiccant Adiabatic

Dehumidifier with Various

Halide Salt desiccants”

Presented at 5th International Conference

on Computational Methods for Thermal

Problems (THERMACOMP – 2018).

IISc Bangalore - 9-11 July, 2018

2018

22

M. Ravi Sankar

“Nano-finishing of Bio-

Implants using Polymer

Rheological Abrasive

Complex Suspensions”

4th International Symposium on

Advances in Sustainable Polymers (ASP-

2018), 8-11 January, 2018, IIT Guwahati,

India.

2018

23

R.R. Behera, A.H.,

L.Pandey,, M. Ravi

Sankar,

“Laser Surface Bio-Coating of

Functionally Graded TiO2-

HAp on Textured Ti Alloy for

Enhancing Bioactivity and

Cell Proliferation” 2018. 2018

24

Sahu A., Thakur, R,

Agrawal V., and

Gautam S. S.

A comparative study of

explicit time integration

algorithms for non-linear

systems

1st International Conference on Future

Learning Aspects of Mechanical

Engineering (FLAME - 2018), Amity

University, Noida, October 3rd – 5th ,

2018.

2018

25

Saipraneeth G. and

Gautam S. S.

Nonlinear finite element

analysis of a gecko spatula

adhesion on a rigid substrate





2018

2018

26

Bora D., Kumar M.,

and Gautam S. S.

Simulation of ductile fracture

at high velocity impact of

cylindrical tubes





2018.

2018

27

Agrawal V., and

Gautam S. S.

An isogeometric based study

of mortar contact algorithm

for frictionless sliding





2018.

2018

28

Agrawal. V, and

Gautam S. S.

A Comparative Study of

Contact Problem Solution

Based on Different

Isogeometric Contact

Formulations

13th World Congress on Computational

Mechanics / 2nd Pan American Congress

on Computational Mechanics (WCCM

2018)., July 23rd – 27th , 2018..

2018

29

Deepak Sharma,

Syed Zaheer Basha

and Sandula Ajay

Kumar, EMO 2019.

Diversity Over Dominance

Approach for Many-Objective

Optimization On Reference-

Points-based Framework” “In:

Deb K. et al. (eds)

Evolutionary Multi-Criterion

Optimization

Lecture Notes in Computer Science,

11411, pp 278 – 290. Springer, Cham 2019

30

Deepak Sharma,

Sukhomay Pal,

Aayush Sahay, Puneet

Kumar, Gaurav

“Local Search Heuristics

based Genetic Algorithm for

Capacitated Vehicle Routing

Problem”

2nd International Conference on

Computational Methods in

Manufacturing (ICCMM), 8 – 9 March

2019, IIT Guwahati, India.

2019

of 44

Agarwal, and

Katravath Vignesh

31

Riddhiman Saikia and

Deepak Sharma

“Hybridizing Evolutionary

Multi-Objective Algorithm

Using Random Mutations and

Local Searches”

in 2nd International Conference on



2019, IIT Guwahati, India.

2019

32

Utpal Kiran, Subhajit

Sanfui, Shashi Kant

Ratnakar, Sachin

Singh Gautam, and

Deepak Sharma

“Comparative Analysis of

GPU-based Solver Libraries

for A Sparse Linear System of

Equations”




2019, IIT Guwahati, India

2019

33

P. Paul, K.S.R.K.

Murthy and D.

Chakraborty

Influence of the notch length

on the optimal radial location

of strain gage in a single

edged notched plate

1st International Conference of Emerging

Trends in Mechanical Engineering

(ICETME 2018), 20-22 December, SRIT,

Anantapur, Andhra Pradesh.

2018

34

P. Paul,

K.S.R.Krishna

Murthy, and

Debabrata

Chakraborty

Effect of material properties

on optimal radial strain gage

locations in sharp V-notched

configurations

3rd International Conference on Design,

Analysis, Manufacturing & Simulation

(ICDAMS-2018), 6–7 April, Saveetha

School of Engineering, Chennai.

2018

35

S. Sajith, K.S.R.K.

Murthy, P.S. Robi

Accurate Estimation of Mixed

Mode Stress Intensity Factors

using Crack Flank

Displacements

International Conference on Advances in

Material and Manufacturing Engineering

(ICAMME-2019), 15-17 March, Kalinga

Institute of Industrial Technology,

Bhubaneshwar

2019

36

S. Sajith, K.S.R.K.

Murthy, P.S. Robi

Fatigue life prediction under

mixed mode loading using

equivalent stress intensity

factor models

Proceedings of 3rd International

Conference of Design, Analysis,

Manufacturing & Simulation (ICDAMS

2018). April 6-7, Saveetha University,

Chennai, India

2018

37

S Sajith, KSRK

Murthy, PS Robi

Estimation of stress intensity

factors from crack flank

displacements

3rd International Conference on

Advances in Materials and

Manufacturing Applications

(IConAMMA 2018) August 16-18,

Amrita School of Engineering,

Bengaluru, India

2018

38

K Gopala Krishna, K

Yaswanth, B V K

Patnaik, D

Chakraborty, K S R K

Murthy

Finite element FCG

simulations of turbine disk

2nd National Aero Propulsion

Conference NAPC-2018Dec 17-19, 2018,

IIT Kharagpur, West Bengal

2018

39

M.K. Hussain and

K.S.R.K. Murthy

Numerical examination of

sharp V-notches using notch-

flank displacement collocation

method

International Conference on Advances in

Material and Manufacturing Engineering

(ICAMME-2019), 15-17 March, Kalinga

Institute of Industrial Technology,

Bhubaneshwar

2019

40

M.K. Hussain and

K.S.R.K. Murthy

Numerical estimation of notch

stress intensity factors of sharp

V–notches

Proceedings of 3rd International

Conference on Design, Analysis,

Manufacturing & Simulation (ICDAMS-

2018), 6-7 April, Saveetha School of

Engineering, Chennai.

2018

41

M. K. Hussain and K.

S. R. K. Murthy

Comparison of some least-

squares methods for

evaluation of the notch stress

intensities of sharp V-notched

configurations

3rd International Conference on

Advances in Materials and

Manufacturing Applications

(IConAMMA-2018), 16–18 August,

Amrita School of Engineering,

Bengaluru, India

2018

of 44

42

M.K. Hussain and

K.S.R.K. Murthy

Evaluation of notch stress

intensities at sharp V-notches

using a point substitution

method

Second International Conference On

Structural Integrity (ICONS-2018), 14-17

December, Indian Institute of Technology

Madras, Chennai.

2018

43

Debabrata Gayen, D.

Chakraborty and R.

Tiwari

Parametric study on free

vibration and instability of a

functionally graded cracked

shaft in a rotor-disc-bearing

system: finite element

approach



(ICDAMS 2018), April 6-7, 2018,

Saveetha University, Chennai, India.

Paper No. 161

2018

44

Kishor Kumar

Gajrani, Y. Bishal

Singha, Mamilla Ravi

Sankar and Uday

Shanker Dixit,

Tribological Performance of

Graphite, CaF2 and MoS2

Coated Mechanical Micro-

Textured Self-Lubricating

Cutting Tool Material

CPIE-2018, 27th June 2018, Bangkok. 2018

45

Kishor Kumar

Gajrani, Y. Bishal

Singha, Mamilla Ravi

Sankar and Uday

Shanker Dixit

Tribological Performance of

Graphite, CaF2 and MoS2

Coated Mechanical Micro-

Textured Self-Lubricating

Cutting Tool Material

CPIE-2018, 27th June 2018, Bangkok. 2018

46

M. Ravi Sankar, Vijay

Kumar Jain, K.P.

Rajukar, �

"Rheological and Nano-

finishing Studies of Elastically

Dominant Multiple Polymers

Blend Abrasivve Flow

Finishing Medium

19th CIRP Conference on Electro

Physical and Chemical Machining, 23-27

April 2018, Bilbao, Spain.

2018

47

Monami Bhuyan,

Arnab Sarmah, Kishor

Kumar Gajrani,

Ashutosh Pandey,

Tushar G. Thulkar, M.

Ravi Sankar

"State of Art on Minimum

Quantity Lubrication in

Grinding Process"

8th International Conference of Materials

Processing and Characterization

(ICMPC), 16-18 March, 2018, GRIET,

Hyderabad, India.

2018

48

Swarup Banik,

Navneet Kalita,

Kishor Kumar

Gajrani, Ramchandra

Kumar, M. Ravi

Sankar

"Recent Trends in Laser

Assisted Machining of

Ceramic Materials"

, 8th International Conference of

Materials Processing and

Characterization (ICMPC), 16-18 March,

2018, GRIET, Hyderabad, India

2018

49

Kishor Kumar

Gajrani, M. Ravi

Sankar,

"Cutting Fluids Emissions in

Mechanical Machining and its

Adverse Effects on

Biodiversity"

21stADNAT Convention and

International Symposium on Biodiversity

and Biobanking (BIODIVERSE-2018),

27-29 January, IIT Guwahati, India, 2018

2018

50

Sarita Bharti, S

Senthilvelan,

SURFACE DURABILITY OF

POLYAMIDE 66 SPUR

GEAR UNDER DRY AND

OIL LUBRICANT

CONDITION

FISITA 2018 Word Auotmotive

Congress, 2-5 October 2018,

Chennai,India

2018

51

Adidtya Kumar,

Karthick Pandia, S

Senthilvelan

BENDING FATIGUE

PERFORMANCE OF

INJECTION-MOLDED

CARBON NANOTUBE

REINFORCED

POLYPROPYLENE SPUR

GEARS

FISITA 2018 Word Auotmotive

Congress, 2-5 October 2018,

Chennai,India

2018

52

Anwesa Barman,

Manas Das

Analysis of forces during spot

finishing of titanium alloy

using novel tool in magnetic

Proceedings of the 13th Manufacturing

Science and Engineering Conference

MSEC2018, June 18-22, 2018, Texas

2018

of 44

field assisted finishing

process,

A&M University, College Station, TX,

USA, paper ID MSEC2018-6352.

53

S. Shyam, B. Mehta

and P. K. Mondal

“Thermohydrodynamics of

ferrofluidic flow with periodic

pulsation under the effect of

static and alternating magnetic

field-: a numerical study”

Proceedings of the 16th International

Heat Transfer Conference, IHTC-16

August 10-15, 2018.

2018

54

P.V.S.S.Sridhar,

Shailesh kumar,

Kaushik Pal, Bhaskar

Kumar Chakraborthy,

Rituraj Bhattacharjee,

Subhashis Majumder,

Pankaj Biswas,

Pinakeshwar Mahanta

Experimental Investigation

and Mechanical

Characterization of Double

Sided Submerged Arc

Welding of AISI 304

Austenitic Stainless Steel”

AIMTDR-2018, December 13-15,

College of Engineering, Anna

University,Chennai

2018

55

Pardeep Pankaj and

Pankaj Biswas

Study of thermally induced

residual stress and

deformation in the CO2 laser

welding of AISI 304 stainless

steel thin plates



University,Chennai

2018

56

Pardeep Pankaj and

Pankaj Biswas

Dissimilar FSW od DH36

shipbuilding steel and mild

steel



University,Chennai

2018

57

Nandan Kanan Das,

Arun Kadian, Avinish

Tiwari, Pardeep

Pankaj and Pankaj

Biswas

“Transient Thermal Analysis

of Friction stir welding of

AA6061”

CPIE-2018, Thiland, Bankok. 2018

58

Avinish Tiwari,

Pardeep Pankaj ,

Nandan Kanan Das

and Pankaj Biswas,

“ Joint Quality Evaluation of

Shipbuilding Grade DH36

Steel Using WC-10% Co

Alloy Based FSW Tool

AIMTDR 2018, Anna University,

Chennai 2018

59

Kumar Abhishek and

Biswas Pankaj

“Effect of Process Parameters

of Plasma Arc Preheating on

Low Carbon Steel",

International Conference on


Manufacturing March 8-9, IIT Guwahati

2018

60

Avinish Tiwari,

Pardeep Pankaj,

Piyush Singh, Pankaj

Biswas and Sachin D.

Kore

FSW of DH36 shipbuilding

grade steel


Production and Industrial Engineering

(CPIE-2018), 26-29 June Bangkok,

Thailand

2018

61

Sridhar P V S S,

Vishnu Nair, Pankaj

Biswas, and

Pinakeswar Mahanta

Thermomechanical analyses

of Single Sided Single pass

Submerged arc welding of

AISI 304 Austenitic Stainless

Steel

ICCMM 2019, Mar 8-9, IIT Guwahati. 2019

62

Saurav Suman,

Avinish Tiwari,

Pardeep Pankaj,

Pankaj Biswas

Numerical study of welding

distortion in saw welded creep

strength enhanced ferrite steel

joint



Mechanical Engineering, Nov-18, NIT

Meghalaya.

2018

63

Saurav Suman,

Avinish Tiwari,

Pardeep Pankaj,

Pankaj Biswas, Basil

Kuriachen, Abhijit

Sinha

Modelling of welding

sequences for minimization of

weld induced distortions and

residual stresses

AIMTDR, Dec-18, Anna University 2018

of 44

64

Saurav Suman,

Pardeep Pankaj,

Avinish Tiwari,


Kuriachen, Abhijit

Sinha

Effect of pre and post welding

processes on the distortion

pattern in a SAW welded butt

joint of P91 steel plate

AIMTDR, Dec-18 Anna University 2018

65

Bordoloi D.J. and R.

Tiwari

Monitoring of Induction

Motor Mechanical and

Electrical Faults by Optimum

Multiclass-Support Vector

Machine Algorithms Using

Genetic Algorithm,

Proceedings of IFToMM


Rotordynamics, September 23-27, 2018,

Rio de Janeiro, Brazil.

2018

66

P. Gangsar and R.

Tiwari

Performance Analysis of

Support Vector Machine and

Wavelet Packet Transform

based Fault Diagnostics of

Induction Motor at Various

Operating Conditions

Proceedings of IFToMM 9th



Rio de Janeiro, Brazil

2018

67

J. S. Rapur and R.

Tiwari, Multi Fault,

Diagnosis of Centrifugal

Pumps with Time, Frequency

and Wavelet based Features

using Support Vector

Machines





2018

68

N. Sarmah and R.

Tiwari

Identification of Crack and

Internal Damping Parameters

using Full Spectrum

Responses from a Jeffcott

Rotor Integrated with an

Active Magnetic Bearing




Rio de Janeiro, Brazil

2018

69

Siva Srinivas R. and

R. Tiwari

Identification of Coupling

Parameters in Flexibly

Coupled Jeffcott Rotor

Systems with Angular

Misalignment and Integrated

Through Active Magnetic

Bearing,





2018

70

P. Dinesh, M.R.

Behera, P.G. Ranjith,

N. Muthu

Multiscale modelling of

fracture in wet porous media

1st International Symposium on In-situ

Modification of Deposit Properties for

Improving Mining 2018 (IMDPIM2018),

Taiyuan, China, 2018.

2018

71

Saurav Suman,

Avinish Tiwari,

Pardeep Pankaj,

Pankaj Biswas

Numerical study of welding

distortion in saw welded creep

strength enhanced ferrite steel

joint



Mechanical Engineering, Nov-18, NIT

Meghalaya.

2018

72

Saurav Suman,

Avinish Tiwari,

Pardeep Pankaj,


Kuriachen, Abhijit

Sinha

Modelling of welding

sequences for minimization of

weld induced distortions and

residual stresses

AIMTDR, Dec-18, Anna University. 2018

73

Saurav Suman,

Pardeep Pankaj,

Avinish Tiwari,


Kuriachen, Abhijit

Sinha

Effect of pre and post welding

processes on the distortion

pattern in a SAW welded butt

joint of P91 steel plate,

AIMTDR, Dec-18 Anna University 2018

of 44

74

A Mahapatro, P.

Mahanta

Effect of Distributor Plate

Design on The

Hydrodynamics of A

Pressurized Circulating

Fluidized Bed

International Conference on Sustainable

Energy and Environment Sensing,SEES-

2018,18-19 June, 2018 at Fitzwilliam

College, University of Cambridge, in

Cambridge city, United Kingdom

2018

75

Bhaben Kalita and S.

K. Dwivedy

Dynamic Analysis of a

Parametrically Excited Golden

Muga Silk Embedded

Pneumatic Artificial

The 14th International Conference on

Vibration Engineering and Technology of

Machinery (VETOMAC XIV), Lisbon,

Portugal, September 10-13, 2018

2018

76

Bhaben Kalita and S.

K. Dwivedy

Forced Vibration Analysis of a

Silk Fibre Embedded

Pneumatic Artificial Muscle


Robot Intelligence Technology and

Applications (RITA 2018), Putrajaya,

Malaysia, December 16-18, 2018

2018

77

S. Mohanty, S. Sikder

and S. K Dwivedy

Nonlinear analysis of

rotational inertial double tuned

mass damper by Harmonic

balance method.

First International Conference on Recent

Innovations & Developments in

Mechanical Engineering (IC-RIDME

2018), NIT Meghalaya, India,November

2018

2018

78

S. Mohanty and S. K

Dwivedy,

Nonlinear analysis of a hybrid

vibration absorber for super-

harmonic resonance condition

Western Pacific Commission

for Acoustics (WESPAC

2018), CSIR-National

Physical Laboratory

New Delhi, India,November 2018 2018

79

A. Garg and S. K.

Dwivedy

Theoretical and Experimental

Investigation of

ParametricallyExcited

Piezoelectric Energy

Harvester


VibrationEngineering and Technology of

Machinery, VETOMAC XIV 2018,

Lisbon, Portugal. DOI:

10.1051/matecconf/201821102009

2018

80

Y Gawade, Sudip

Shyam, Balkrishna

Mehta

Pressure Characteristics of

Single Isolated Ferrofluidic

Slug under the Influence of

External Magnetic Feild

, 7th International and 45th national

conference on Fluid Mechanics and Fluid

power, Dec 10-12, 2018, IIT Bombay

2018

81

Sudip Shyam,

Balkrishna Mehta and

Pranab Mondal

Thermo-hydrodynamics of

ferrofluidic flow with periodic

pulsation under the effect of

static and alternating magnetic

field

conference, IHTC 18, Beijing China,

August 2018 2018

82

Debabrata

Chakraborty,

Debaleena

Chakraborty, and K. S

R. K. Murthy

A finite element based

procedure for accurate

determination of mode I SIF

of orthotropic materials based

on two parameter strain series

9th ICCM 2018, August 6-10, 2018,

University of Sapienza, Rome, Italy 2018

83

Debabrata Gayen, D

Chakraborty and

Rajiv Tiwari

, Parametric study on free

vibration and instability of a

functionally graded cracked

shaft in a rotor-disc-bearing

system: finite element

approach



(ICDAMS 2018), April 6-7, 2018,

Saveetha University, Chennai, India.

Paper No. 161

2018

84

D. Shankar, M.

Pandey, D.N. Basu

Coupled-Neutronic-

Thermalhydraulic Stability

Appraisal of Supercritical

Forced Flow Channels

Following Lumped Parameter

Approach

Proceedings of 16 International Heat

Transfer Conference (IHTC-16), Beijing,

China, August 10-15, 2018, Paper ID

IHTC16-23961.

2018

of 44

85

D. Shankar, M.

Pandey, D.N. Basu

Coupled-Neutronic-





Approach

Proceedings of 16 International Heat

Transfer Conference (IHTC-16), Beijing,

China, August 10-15, 2018, Paper ID

IHTC16-23961

2018

86

D. Hirakh, Mahanta. P

EFFECT of SUPERFICIAL

VELOCITY on the

HYDRODYNAMIC

BEHAVIOUR of a CONICAL

FLUIDIZED BED:

EXPERIMENTAL and

NUMERICAL STUDIES



Mechanics and Fluid Power (FMFP)

December 10-12, 2018, IIT Bombay,

Mumbai, India, PAPER NO. 826

2018

87

Haque N, Singh A,

and Saha UK

Particle image velocimetry

investigation of fluid flow in

fractured porous media

7th International and 45th National


Power, December 10-12, IIT Bombay,

Mumbai, India.

2018

88

Talukdar PK, Rathod

UH, Kulkarni V, and

Saha UK

Performance evaluation of

vented Savonius wind turbines

through wind tunnel testing




Mumbai, India.

2018

89 Dabi M and Saha UK

Performance and emission

characteristics of a

compression ignition engine

run on vegetable oil-diesel

blends and diethyl ether,




Mumbai, India.

2018

90

Haque N, Singh A,

and Saha UK

A noble method for rapid

prototyping of porous

micromodels applicable to

enhanced oil recovery,


Advances in Fluid and Thermal Sciences,

December 5 – 7, Dubai, UAE

2018

91

Talukdar PK,

Kulkarni V, and Saha

UK

Performance characteristics of

vertical-axis off-shore

Savonius wind and Savonius

hydro-kinetic turbines

Paper No. OMAE2018-78497, ASME

37th International Conference on Ocean,

Offshore and Arctic Engineering, June 17

– 22, Madrid, Spain

2018

92

Alom N, Borah B, and

Saha UK

An insight into the drag and

lift characteristics of modified

Bach and Benesh profiles of

Savonius wind rotor

4th International Symposium on

Hydrogen Energy, Renewable Energy

and Materials (HEREM), June 13 – 14,

Bangkok, Thailand

2018

93

Hotta, S. K., Sahoo,

N., Mohanty K.,

Mahanta, P

Effect of compression ratio on

the performance of a constant

speed spark ignition engine

operating on raw biogas


Sustainable Energy and Environmental

Challenges, Jan 01-03, 2018, Indian

Institute of Science, Bangalore, India

2018

94

Hotta, S. K., Sahoo,

N., Mohanty K.,

Mahanta, P


the performance of a constant

speed spark ignition engine

operating on raw biogas


Sustainable Energy and Environmental

Challenges, Jan 01-03, 2018, Indian

Institute of Science, Bangalore, India

2018

95

Hotta, S. K., Rout, A.

K., Sahoo, N.,

Mohanty K


the cyclic variability and

thermal efficiency of a biogas

fueled spark igniton engine



Power, Dec 10-12, 2018, Indian Institute

of Technology, Bombay, India

2018

96

Gunjo, D.G.,

Mahanta, P

and Robi, P.S., 2019.

Designing and Utilizing of the

Solar Water Heater for

Digestion of Lignocellulosic

Biomass.. In Advances in

Waste

Management (pp. 91-105). Springer,

Singapore 2019

of 44

97

N. Bhardwaj, R.

Ganesh Narayanan

and U.S. Dixit

Refilling of pinhole in friction

stir spot welding using waste

chips,

7th International and 28th All India

Manufacturing Technology, Design and

Research (AIMTDR) Conference,

December 13-15, 2018, Anna University,

Chennai.

2018

98

G.C. Verma, P.M.

Pandey and U.S.

Dixit,

Experimental investigations to

evaluate machining accuracy

of ultrasonic assisted milling

on thin-walled structures





Chennai.

2018

99

F. Chen, J. Zhang, M.

Wu, X. Chu and U.S.

Dixit

Design of open battery pack

interface for electric vehicle

personalization





Chennai.

2018

100

A. Raj, A. Ch

Borsaikia and U.S.

Dixit

Manufacturing of autoclaved

aerated concrete (AAC):

present status and future

trends





Chennai.

2018

101

A. Bisht, A. Roy, U.

S. Dixit, S. Suwas and

V.V. Silberschmidt

Small-scale machining

simulations



Manufacturing March 8-9, 2019, IIT

Guwahati.

2019

102

Shranish KAR,

Poonam KUMARI

Three Dimensional Bending

Solution Of Cylindrical Shell

Panel Having Arbitrary Edge

Support Conditions Using

Extended Kantorovich Method


Material for Advanced Technologies,

Singapore from 23 to 28 June, 2019

2019

103

Agyapal SINGH,

Poonam KUMARI,

Ehtesham HUSSAIN

Analytical Free Vibration

Solution Of Functionally

Graded Beam Having

Longitudinal Stiffness

Variation


Material for Advanced Technologies,

Singapore from 23 to 28 June, 2019

2019

104

Susant Behera,

Poonam Kumari

Free Vibration Analysis of

Levy-type Hybrid Plates using

Three-dimensional Extended

Kantorovich Method

Second International Conference On

Structural Integrity, ICONS2018, IIT

Madras, 14-18 December, 2018

2018

105

Ahmed F. and Kalita

K

Controllability of Radial

Displacement in Bearingless

Switched Reluctance Motor

with Bridge Configured

Winding

August 2018, International symposium on

Magnetic Bearings 16 (ISMB16),

Beijing, China.

2018

106

Arnab Kr. De

, A diffuse interface immersed

boundary method for complex

moving boundary problems

Journal of computational Physics , Vol.

366, 226-251, 2018. 2018

107

A. K. De, V. Eswaran

and P. K. Mishra

Dynamics of plumes in

turbulent Rayleigh-Bénard

convection

European Journal of Mechanics -

B/Fluids , vol. 72, 164-178, 2018 2018

108

G. Bolar and S. N.

Joshi

An Experimental Investigation

on Productivity and Product

Quality during Thin-Wall

Machining of Aluminum alloy

2024-T351





Chennai.

2018

109

U. Sarma and S. N.

Joshi

Effect of Laser Parameters on

Laser Induced Plasma


Manufacturing Technology, Design and 2018

of 44

Assisted Ablation (LIPAA) of

Glass



Chennai.

110

S. Das and S N Joshi

Thermal modelling and

simulation of crater generation

on wire electrode during wire

EDM operation





Chennai.

2018

111

V. Singh and S N

Joshi

Computation of End-Cutting-

Edge Wear of Single Point

Cutting Tool using Image

processing



Manufacturing, March 8-9, 2019, IIT

Guwahati

2019

112

B Barkachary and S N

Joshi

Numerical Simulation and

Experimental Validation of

Nanoindentation of Silicon

using Finite Element Method



Manufacturing, March 8-9, 2019, IIT

Guwahati

2019

113

B. Barkachary and S

N Joshi

Numerical modeling and

simulation of plunge cutting of

silicon using finite element

method

, International Conference on Recent



2018) during November 8-10, 2018, NIT

Meghalaya

2018

114

J. Kumar, S. Das and

S N Joshi

Three-dimensional numerical

modelling of temperature

profiles on the wire electrode

during wire electric discharge

machining process





Meghalaya

2018

115

U. Sarma and S N

Joshi

Two-dimensional numerical

investigation on the effect of

laser parameters during laser

indirect machining of glass





Meghalaya

2018

116

A. Iqbal, S. K. Sarma

and M. Pandey

. Non-adiabatic Flow

Characteristics of Dielectric

Fluids in Trapezoidal

Microchannel



Mechanics and Fluid Power December

10-12, 2018, IIT Bombay, Mumbai, India

2018

117

A. Kumar, R. Gupta,

A. Iqbal, S. K. Sarma

and M. Pandey

µ-PIV Measurement in a

Microtube.





2018

118

K. Saikia, D.N. Basu,

M. Pandey

Effect of Subcooling on the

Instabilities of a Two-Phase

Natural Circulation System





2018

119

R. Kumar, M. Pandey

Three Dimensional Simulation

of a Condensing Taylor

Bubble in a Microchannel





2018

120 S. Ahmed, M. Pandey

Study of Transport

Phenomena in the Evaporator

of Two-phase Capillary

Devices using Thin Film

Evaporation Model,

Joint 19th International Heat Pipe

Conference and 13th International Heat

Pipe Symposium, Pisa, Italy, June 10-14,

2018

2018

121

R. Kalule, S.K.

Sarma, A. Iqbal, M.

Pandey

, A Study on the Onset of

Annular Two-Phase Flow in a

Microchannel,


Thermal Engineering: Theory and

ApplicationsFebruary 23-26, 2019,

Gandhinagar, India

2019

of 44

122

M.Pandey

Coupled-Neutronic-





Approach


Heat Transfer Conference, IHTC-

16, August 10-15, 2018, Beijing, China

2018

Book, Book Chapter, etc. (PERIOD: 1 APRIL 2018 – 31 MARCH 2019)

Total No. of Books published: 6

Total No. of Book Chapters published: 36

Format for submission of Book

Sl.

No. Name of Author/s Name of Book Publisher

Volume

and Issue

No. (If

any)

Total

Page

No.

ISBN Year of

Publication

1

S.S. Pande and

U.S. Dixit

(Editors)

Precision Product-

Process Design and

Optimization: Select

Papers from AIMTDR

2016

Springer,

Singapore

434

9789811087677

2018

2

U.S. Dixit and R.

Kant (Editors)

Simulations for Design

and Manufacturing:

Select Papers from

AIMTDR 2016

Springer,

Singapore

292

9789811085178

2018

3

U.S. Dixit, S.N.

Joshi and J. Paulo

Davim (Eds.)

Application of Lasers

in Manufacturing:

Select Papers from

AIMTDR 2016

Springer,

Singapore

253

9789811305566

2018

4

U.S. Dixit and R.

Ganesh

Narayanan

Strengthening and

Joining by Plastic

Deformation: Select

Papers from AIMTDR

2016

Springer,

Singapore

246

978-981-13-

0378-4

2019

5

U Biswas, A

Banerjee, S Pal, A

Biswas, D Sarkar,

S Haldar (Editors)

Advances in

Computer,

Communication and

Control - Proceedings

of ETES 2018

Springer

Singapore

563

978-981-13-

3122-0

2019

6

P Muthukumar (

Editor)

International

Conference on

Advanced Functional

Materials 2017

(ICAFM’17),

Materials today

(Elsevier),

Volume 5, Issue

6, Part 2, Pages

14215-14638

(2018),

Format for submission of Book Chapter, etc.

Sl.

No

.

Name of

Author/s

Name of

Paper Name of Book Publisher

Volume and

Issue No. (If

any)

Page

No. ISBN

Year and

Date of

Publicatio

n

1 Sathisha, H.M.,

Dalal, A.

An Unsteady

Model to

Study the

Effects of

Porosity and

Sustainable

Energy

Technology

and Policies –

A

Springer 2 379-

396

978-981-10-

8392-1 2018

of 44

Temperature

in All-

Vanadium

Redox Flow

Battery with

Mass Transfer

and Ion

Diffusion

Transformation

al Journey

2

Kishor Kumar

Gajrani,

Mamilla Ravi

Sankar

Sustainable

cutting fluids:

Thermal,

Rheological,

Biodegradatio

n, Anti-

corrosion,

Storage

Stability

Studies and

its Machining

Performance

Encyclopedia

of Renewable

and

Sustainable

Materials

Elsevier

DOI:

10.1016/B97

8-0-12-

813195-

4.11152-X

2018

3

Kishor Kumar

Gajrani,

Mamilla Ravi

Sankar

Sustainable

Machining

with Self-

Lubricating

Coated

Mechanical

Micro-

Textured

Cutting Tools

Encyclopedia

of Renewable

and

Sustainable

Materials

Elsevier

DOI:

10.1016/B97

8-0-12-

813195-

4.11325-2

2018

4

Kishor Kumar

Gajrani, Y

Bishal Singha,

Mamilla Ravi

Sankar, Uday

Shanker Dixit

Tribological

and

Machining

Performance

of Graphite,

CaF2 and

MoS2Coated

Mechanical

Micro-

textured Self-

Lubricating

Cutting Tool

Manufacturing

Engineering

Springer

Nature

Singapore

151−16

5

978-981-13-

6287-3 2019

5

Chandan

Kumar, Manas

Das, C. P. Paul,

B. Singh

Experimental

study of fiber

laser beam

welding of 5

mm thick Ti-

6Al-4V alloy,

Applications of

Lasers in

Manufacturing

Springer 978-981-13-

0556-6_3. 2018

6

D. Sam Dayala

Dev, Enni

Krisha, Manas

Das

Novel

Finishing

Process

Development

for Precision

Complex-

Shaped

Hemispherica

l Shell by

Bulk Plasma

Processing

Precision

Product-

Processes

Design and

Optimization

Springer 978-981-10-

8767-7_12 2018

7 Manas Das, U.

S. Dixit

Advanced

Machining

Processes

Introduction to

Mechanical

Engineering

Springer 45-67 978-3-319-

78488-5_9 2018

of 44

8

Jana, K.,

Mahanta, P. and

De, S

Role of

Biomass for

Sustainable

Energy

Solution in

India

Sustainable

Energy and

Transportation

Springer,

Singapore. 2018

9

Mallick, D.,

Buragohain, B.,

Mahanta, P. and

Moholkar, V.S.,

Gasification

of Mixed

Biomass:

Analysis

Using

Equilibrium,

Semi-

equilibrium,

and Kinetic

Models

Coal and

Biomass

Gasification

Springer,

Singapore.

269-

296 2018

10

Mallick, D.,

Mahanta, P. and

Moholkar, V.S

Synergistic

Effects in

Gasification

of

Coal/Biomass

Blends:

Analysis and

Review

Coal and

Biomass

Gasification

Springer,

Singapore.

209-

233 2018

11

NK

Mishra, Snehasi

sh Panigrahy , P

Muthukumar

A Review on

Clean

Combustion

Within Porous

Media

Air Pollution

and Control

Springer

Nature

Singapore

Pte Ltd.

223-

241 2018

12 Muthukumar P,

Hakeem Niyas

Materials,

Design and

Development

of Latent Heat

Storage

Systems for

Medium and

Large-scale

Applications:

Issues and

Challenges

Reference

Module in

Materials

Science and

Materials

Engineering

Elsevier 473-

497 2018

13

Avinish Tiwari,

Piyush Singh,

Pankaj Biswas,

and Sachin D.

Kore,

Friction stir

welding of

low carbon

steel

Advances in

Materials,

Mechanical

and Industrial

Engineering

Springer 209-

226 2018

14

Avinish Tiwari,

Pardeep Pankaj,

Abhishek

Bharadwaj,

Piyush Singh,

Pankaj Biswas

and Sachin D.

Kore

Friction stir

welding of

shipbuilding

grade DH36

steel

Manufacturing

Engineering Springer 17-34 2018

15

Pardeep Pankaj,

Rakesh Bhadra,

Avinish Tiwari,

Pankaj Biswas,

and Sachin D.

Kore

Transient

Thermal

Analysis of

CO2 Laser

Welding of

AISI 304

Stainless Steel

Thin Plates

Manufacturing

Engineering Springer 49-65 2019

of 44

16

Pardeep Pankaj,

Rakesh Bhadra,

Avinish Tiwari,

Pankaj Biswas,

and Sachin D.

Kore,

Dissimilar

friction stir

welding of

DH36

shipbuilding

steel and Mild

steel

Advances in

Additive

Manufacturing

and Joining

Springer 2019

17

Nandan Kanan

Das, Arun

Kadian, Avinish

Tiwari, Pardeep

Pankaj and

Pankaj Biswas,

Transient

Thermal

Analysis of

Friction stir

welding of

AA606

Manufacturing

Engineering 2018

18

K K

Basumatary, S

K Kakoty and K

Kalita

Stability

Analysis of a

Rigid Rotor

Supported on

Gas Foil

Bearings

under

Different

Loading

Conditions

Machines,

Mechanism

and Robotics

Springer,

Singapore. 61-71 2018

19 S.M. Hazarika

and U.S. Dixit

Robotics:

history, trends

and future

directions

Introduction to

Mechanical

Engineering,

Edited by J.

Paulo Davim

Springer

London

213-

239

978-3-319-

78488-5 2018

20 A Bhowmick,

SM Hazarika

E-mail spam

filtering: a

review of

techniques

and trends

Advances in

Electronics,

Communicatio

n and

Computing

Springer 583-

590 2018

21

Devarshi

Kashyap,

Charan

Mukundan and

S.Kanagaraj

Manufacturin

g and

characterizati

on of shape

memory

polymers and

composites

Primary and

Secondary

Manufacturing

of Polymer

Matrix

Composites

CRC press 43-73 2018

22 Bolar G. and

Joshi S. N

Numerical

Modeling and

Experimental

Validation of

Machining of

Low-Rigidity

Thin-Wall

Parts

Precision

Product-

Process Design

and

Optimization

Springer 99-122 2018

23 Kant R. and

Joshi S. N.

A Numerical

Investigation

into the Effect

of Forced

Convection

Cooling on

the

Performance

of Multi-scan

Laser

Bending

Process

Application of

Lasers in

Manufacturing

Springer 21-43 2018

of 44

24

P. S. Robi,

Sukhomay Pal,

and Biswajit

Parida

Recent Trends

and Advances

in Friction

Stir Welding

and Friction

Stir

Processing of

Metals

Manufacturing

Techniques for

Materials

CRC

Press

715-

751 2018

25

Varun Sharma,

Pulak M.

Pandey, Uday

S. Dixit, Anish

Roy, Vadim V.

Silberschmidt,

Ultrasonic

assisted

turning: a

comparative

study of

surface

integrity

Precision

Product-

Process Design

and

Optimization:

Select Papers

from AIMTDR

2016,

Springer

Singapore

337-

360 2018

26 T.K. Gogoi and

U.S. Dixit

Basics and

applications

of thermal

engineering

Introduction to

Mechanical

Engineering,

Edited by J.

Paulo Davim

Springer

London

137-

178

978-3-319-

78488-5 2018

27 M. Das and

U.S. Dixit

Advanced

machining

processes

Introduction to

Mechanical

Engineering,

Edited by J.

Paulo Davim,

Springer

London

269-

296

978-3-319-

78488-5 2018

28

Achinta Sarkar,

Maryom Dabi

and Ujjwal K.

Saha

Supplementin

g the energy

need of diesel

engines in

Indian

transport and

power sectors

Sustainable

Energy and

Transportation

Springer 61-86 978-981-10-

7508-7 2018

29

Deb, S., Kalita,

K., & Mahanta,

P

Distribution

Network

Planning in

presence of

Electric

Vehicle

Charging

station loads

Smart Power

Distribution

Systems

Elsevier 529-

553 9.78E+12 2018

30

M. Hazarika,

U.S. Dixit and

J. Paulo Davim

History of

production

and industrial

engineering

through

contributions

of stalwarts

Manufacturing

Engineering

Education

Chandos

Publishing 29

978-0-08-

101247-5 2019

31

Ashutosh

Kumar, S.K.

Kakoty

A Variable

Viscosity

Technique for

the Analysis

of Static and

Dynamic

Performance

Parameters of

Three-Lobe

Fluid Film

Bearing

Operating

with TiO2-

Manufacturing

Engineering

Springer

Singapore

Manufacturi

ng

Engineering

Select

Proceedings

of CPIE

2018

pp 1-16

ISBN 978-

981-13-

6287-3

2019

of 44

Based

Nanolubricant

32 Hakeem N,

Muthukumar P

Comparison

of Thermal

Characteristic

s of Sensible

and Latent

Heat Storage

Materials

Encapsulated

in Different

Capsule

Configuration

s

Springer

Proceedings in

Energy

Springer

Springer

Proceedings

in Energy

DOI

10.1007/978-

981-10-

4576-9_2

33

Chilaka RCR,

Hakeem N,

Likhendra P and

Muthukumar P

Performance

Investigation

of Lab-Scale

Sensible Heat

Storage

System

Springer

Proceedings in

Energy

Springer

Springer

Proceedings

in Energy

DOI

10.1007/978-

981-10-

4576-9_16.

34 Muthukumar P,

Hakeem Niyas

Materials,

Design and

Development

of Latent Heat

Storage

Systems for

Medium and

Large-scale

Applications:

Issues and

Challenges

Reference

Module in

Materials

Science and

Materials

Engineering

Elsevier

35

Kishor Kumar

Gajrani,

Mamilla Ravi

Sankar

Role of Eco-

friendly

Cutting Fluids

and Cooling

Techniques in

Machining

Materials

Forming,

Machining and

Post

Processing

Springer

Nature

Switzerlan

d AG

159-

181

978-3-030-

18853-5

10. Conferences/Workshops/Symposia Attended: International, National

Name of Faculty Name of Conf./Workshop Place Date International/National

11. Invited Lectures of Faculty: In India, Abroad (Please do not repeat entries from Sl. No. 10)

Name of

Faculty

Name of Lecture Name of Inst./Org. Place Date

Amaresh

Dalal

Numerical Simulations of Two-

Chamber Microbial Fuel Cell

Invited Lecture, National ILan

University, Taiwan

ILan, Taiwan 8th March,

2019

Amaresh

Dalal

Anupravaha: Development of a

General Purpose CFD Solver

Invited Lecture, NIT

Meghalaya

Shillong, Meghalaya,

India

19th

December,

2018

Amaresh

Dalal

Lessons from AnuPravaha:

Towards a General Purpose

Computational Framework on

Hybrid Unstructured Meshes for

Multiphysics Applications

Keynote Lecture, 4th


Computational Methods for

Thermal Problems, July 9-11,

2018, Indian Institute of

Science, Bangalore

Bangalore, India 11th July,

2018

Amaresh

Dalal

Lessons from Anupravaha:

Towards a General Purpose

Computational Framework on

Hybrid Unstructured Meshes for

Multi-Physics Applications

TEQIP, Dibrugarh University Dibrugarh, India 26th May,

2018

of 44

Amaresh

Dalal

Drop Impact on a Liquid Pool TEQIP, Dibrugarh University Dibrugarh, India 25th May,

2018

U.S. Dixit Manufacturing, Friction Institute of Engineering and

Technology, Dibrugarh

University

Dibrugarh, India 27th March,

2018

Sukhomay

Pal

Sensor based weld defects

detection system in friction stir

welding

1st International Conference on

Emerging Trends on

Engineering and Science

(ETES:2018)

Asansol, West Bengal 24th March,

2018

S Kanagaraj Synthesis and characterization of

ceria based solid solution as a

radical scavenger in cochlear

implants

Madras University Chennai 16th March,

2018

Ujjwal K.

Saha

Understanding Aerospace

Engineering (6 Lectures)

Dibrugarh University Dibrugarh 26th March,

2018

Ujjwal K.

Saha

Aeronautics for Beginners (One-

day Workshop)

IIIT Bhagalpur, Bihar Bhagalpur 13th April,

2018

S. K.

Dwivedy

Recent Advances in Dynamic

Analysis of Flexible Robotic

Manipulators

workshop on Recent Advances

in Mechatronics and Robotics

NIT Meghalaya 22nd – 24th

March, 2018

S. K.

Dwivedy

NIT Silchar

P

Muthukumar

Green energy Technologies NIT Jamshedpur NIT Jamshedpur 9th March

P

Muthukumar

Green Hydrogen – A future

Energy Career

12th Int Conf on Thermal

Engineering: Theory and

Applications, February 23-26,

2019,

Gandhinagar, India 26th

February,

2019

P

Muthukumar

Development and testing of large

scale metal hydride based

hydrogen storage device for

automobile and stationary

applications

Indian Oil Corporation Delhi 7th

December,

2018

P

Muthukumar

Green Energy Technologies: A

summary of Research Activates on

Hydrogen and Thermal Energy

Storage Systems carried out at IIT

Guwahati

USA 27th April,

2018

P

Muthukumar

Thermal Energy Storage Systems

for Concentrated Solar Thermal

Power Plant Applications

Wichita state University, USA USA 24th April,

2018

P

Muthukumar

Hydrogen - A Future Green

Energy Carrier

Wichita state University, USA USA 27th March,

2018

U.S. Dixit laser forming and coating National Seminar on Advanced

Research in Mechanical

Engineering (NSARME-2018),

at NIT Manipur

4th - 5th

April, 2018

U.S. Dixit Elasticity TEQUIP at Institute of

Engineering and Technology,

Dibrugarh University,

Dibrugarh 24th May,

2018.

U.S. Dixit Modelling of Manufacturing

Processes: A Historical

Perspective,

at CPIE 2018 in Bangkok Bangkok 27th June,

2018

U.S. Dixit “Lasers Based Manufacturing” NERIST Nirjuli Itanagar 17th

September,

2018

U.S. Dixit How Can We Use Soft Computing

in Design and Manufacturing?”

Shantou University China 16th October,

2018

U.S. Dixit Sustainable Machining Processes IIT Guwahati (TEQUIP) IIT Guwahati 22nd – 24th

October,

2018

of 44

U.S. Dixit Soft Computing Applications in

Design and Manufacturing

NIT Patna Patna 4th June,

2018

G. Biswas Different Regimes of Pool Boiling I2CNER Annual Symposium

on Challenges in Thermal

Science and Engineering,

Towards a Sustainable Society

Kyushu University 31st January

– 2nd

February

G. Biswas Bubble Dynamics in Various

Regimes of Boiling

Fifth International; Conference

in Thermal Problems 2018

IISc Bangalore 9th – 11th

July

G. Biswas Dynamics of Vapor Bubbles in

Film and Nucleate Boiling

Advanced Measurements and

Multiscale CFD Simulations

for Intensification of

Multiphase Flow Processes,

Indo-German Symposium,

IIT Delhi 3rd – 5th

October

P. K. Mondal Recent Advances in Heat and

Fluid Flow

Govt. College of Engineering

and Textile Technology,

Berhampore

West Bengal 18th – 22nd

October

P. K. Mondal Microscale multiphase transport TEQIP, NIT Arunachal Pradesh Arunachal Pradesh,

India

9th March,

2018

Shrikrishna

N Joshi

Industry 4.0, National Productivity Week -

2018

Bongaigaon Refinery |

Indian Oil

Corporation Limited

(IOCL), Bongaigaon,

Assam, India.

Shrikrishna

N Joshi

ED based surface alloying TEQIP3 MPST 2018 NIT Silchar 1st October,

2018

Shrikrishna

N Joshi

Laser based forming TEQIP3 MPST 2018 NIT Silchar 2nd October,

2018

Shrikrishna

N Joshi

Sensors used in manufacturing

automation

TEQIP3 lecture series NIT Arunachal

Pradesh

1st

November,

2018

Shrikrishna

N Joshi

Laser micro-bending TEQIP3 lecture series NIT Arunachal

Pradesh

S K Dwivedy TEQIP Lecture NIT Silchar

S K Dwivedy TEQIP Lecture NIT Meghalaya

S K Dwivedy Introduction to linear and

nonlinear vibration Analysis of

Mechanical Systems: Theory and

Hands on Practice Session

TEQIP Lecture IIT Guwahati 4th

December,

2018

S K Dwivedy Nonlinear Dynamic Analysis of

Smart piezoelectric and Magneto-

Rheological Elastomer based

Structures

National Workshop on

Emerging Applications of

Nonlinear Dynamics and Chaos

in Science and Engineering

IIT Jodhpur 14th

December,

2018

Rajiv Tiwari Vibration Analysis of Rotating

Components Using Modern Tools

TEQIP 3 Jorhat Engineering

College

7th – 8th

September

Rajiv Tiwari Condition Monitoring of Rotating

Machineries Based on Vibrations

TEQIP Lecture IIT Guwahati 4th – 8th

December

S K Kakoty Society and Technology Prof A K Padmapati Memorial

Lecture

Ban Theatre, Tezpur 8th

December

Pankaj

Biswas

4-lectures on Welding Symbols

and Joint Design, Physics of

welding, Advanced Welding

Research (Invited talk )

Assam Engineering College

(28th August)

Pankaj

Biswas

2-lectures on Vibration and Noise

Analysis using Ansys (Invited talk

)

TEQIP-III- Short-term courses,

IIT Guwahati on Vibration and

Noise Analysis of Mechanical

Systems, from 04-08 Dec,

2018,

Pankaj

Biswas

2-Lectures on Nomenclature of

Butt welds and Fillet welds

Short Term Certificate Course

in Welding Technology from

Oct 3 to Oct 14, 2018 at ME

workshop.(10th October)

of 44

Pankaj

Biswas

3-Lectures on SMAW

consumables, types, identification

Short Term Certificate Course

in Welding Technology from

Oct 3 to Oct 14, 2018 at ME

workshop.(7th October)

Pankaj

Biswas

3-lectures on Basics of welding

and, Physics of welding, Metal

transfer in welding (Invited talk )

"TEQIP-III- Short-term

courses, IIT Guwahati on

Advances in Welding Research

and Technology

Pankaj

Biswas

Classification of Welding and

Joints (Invited talk )

,from 26-30 Nov, 2018,"

Satyajit

Panda

"Passive damping of thin-walled

structures through the design of

viscoelastic composites

Workshop on basic welding

technology, IIT Guwahati (July

2018)

NIT Jalandhar, India 22nd

December

Nelson

Muthu

Analytical and Experimental

Studies on Detection of

Longitudinal, L and Inverted T

Cracks in Isotropic and Bi-material

Beams Based on Changes in

Natural Frequencies

TEQIP Lecture - Vibration and

Noise Analysis of Mechanical

Systems

IIT Guwahati 4th

December,

2018

Nelson

Muthu

Connecting Doctors, Researchers

and Entrepreneurs

for Indigenous Medical Device

Innovation

QIP - Short Term Course

On

“Current Status and

Requirements of Biomedical

Devices

IIT Guwahati 25th March,

2019

12. Visitors From Other Institutes / Universities / Organisations / Invited Lectures

(Only distinguished visitors invited by appropriate authority)

Name Name of Inst./Univ./Org. Purpose/ Name of

Lecture

Date Remarks

Prof. Atul

Sharma

IIT Bombay, India

To conduct PhD Viva

Voce

15th

November,

2018

Prof. Partha P.

Mukherjee

Purdue University, USA

To Deliver

Departmental Lecture

27th July,

2018

Professor

Narendra

Dahotre

University Distinguished Research Professor of the

Department of Materials Science and Engineering,

University of North Texas (UNT)

To Deliver


25th October,

2018

Professor K.

Ramamurthi

Former Scientist, ISRO and Former Professor, IIT

Madras

To Deliver


29th October,

2018

Dr. Damodara

Reddy

Institute of High Performance Computing (IHPC),

A-STAR Singapore

To Deliver


12th

November,

2018

Prof. A. M.

Rajendran

University of Mississippi, Oxford, USA

Departmental seminar

cum faculty interaction

9th October,

2018

Mr. Umashankar

Center for Simulation Excellence (CSE), Simulia,

Bengaluru

Colloboration

4th May, 2018

13. Seminars/Workshops/Conferences/Short-Term Courses Organised

Sl.

No.

Name of Faculty

(Convener/ Co-

ordinator, etc.)

Name of Sem./Wor./Con. Funded

By Date

International/

National

No. of

participants

1 P Muthukumar ISHRAE-AICTE Five Day

Refresher Course on Refrigeration

and Air Conditioning

2nd – 6th July,

2018

of 44

2 P Muthukumar TEQIP III Short therm course on

“Energy Efficient and Green Energy

Technologies”- IIT Guwahati

26th – 30th

November,

2018

3 U.S. Dixit and M.

R. Sankar

TEQIP III Short therm course on

“Sustainable Machining Processes”-

IIT Guwahati

22th – 26th

October, 2018

4 S K Dwivedy TEQIP III Short Term Course on

Vibration and Noise Analysis of

Mechanical Systems

4th – 8th

December,

2018

5 S K Kakoty and

Karuna Kalita

SERB School on Noise and

Vibration

6 P. C. Kalita, S. Pal

and D. Sharma

Training Program on Marketing

Management

24th – 28th

September,

2018

7 Panakj Biswas &

S. Pal

TEQIP III Short therm course on

“Advances in welding research and

technology”- IIT Guwahati

26th – 30th

November,

2018

8 S. M. Hazarika TEQIP III Short Term Course on

Fundamentals of Robotics and

Artificial Intelligence

4th – 8th

February,

2019

9 S. M. Hazarika Workshop on Artificial Intelligence,

Robotics & Machine Learning under

AICTE Teaching And Learning

(ATAL) Academy

22nd – 26th

February,

2019

A brief report on the major NATIONAL and INTERNATIONAL events with photographs may also be given

separately in addition to the format given above.

14. Patents:

No. of Patents Applied with details 15

No. of Patents Granted with details …………………………….

Sl.

No.

Name of Faculty

and co researcher Name

Date

Applied/Granted Application No. Remarks

1 Vimal Katiyar, M.

Ravi Sankar, Arbind

Prasad

Process for the preparation

of resorbable polymeric

composite U type bone

staple

2 Vimal Katiyar, M.

Ravi Sankar, Arbind

Prasad

Process for the preparation

of polymer based

Cancellous screws and pins

3 Vimal Katiyar, M.

Ravi Sankar, Arbind

Prasad

Resorbable cortical screw

4 Vimal Katiyar, M.

Ravi Sankar, Arbind

Prasad

Resorbable polymer

composite bone plate

5 Avilash Sahu, S K

Dwivedy, P.S. Robi

Underwater vehicle

6 Nandan Kanan Das

and Pankaj Biswas,

“Design and development

of JIG & FIXTURE for

fabrication of cylindrical

pin profile of FSW tool of

tungsten carbide material

using Wire EDM.

Ref. No. 240P1901

7 U.S. Dixit, A.Ch.

Borsaikia, A. Raj

Autoclaved aerated

concrete(aac) block unit

comprising in-built

anchorage/frog on surface

for enhancement of

bonding and lateral/shear

patent 201831028883

of 44

strength in masonry wall

system

8 Juan Chowdhury,

Gaurav Kumar,

Karuna Kalita,

Sashindra K Kakoty

Linear Switched

Reluctance Actuator for

Powerloom

201731045107

9 Juan Chowdhury,

Gaurav Kumar,

Karuna Kalita,

Sashindra K Kakoty

High Force Density Quad

Air Gap Switched

Reluctance Motor

201731045006

10 Gaurav Kumar,

Karuna Kalita, Kari

Tammi, Seamus D

Garvey, WKS Khoo

Generation of Selective

Pole Pair Field and

Selective Frequency

Transverse Force in Bridge

Configured Winding

Electrical Machines

201831000913

11 Mishra SC,

Pantangi VK.

Porous Radiant Burner for

Domestic LPG Cooking

Device with Improved

Thermal Efficiency and

Reduced Emissions of CO

and NOx. Patent Number

E-2/548/2013-KOL

12 Mishra SC, Niraj

Kumar Mishra

Self-Aspirated LPG

Domestic Cooking Stove

with a Two-Layer Porous

Radiant Burner,

Indian Patent No:

543/KOL/2015

13 Mishra SC, Niraj

Kumar Mishra and

Snehasish Panigrahi

. Medium-Scale Self-

Aspirated Improved Air

Entrainment LPG Cooking

Stove with a Two-Layer

Porous Radiant Burner,

Indian Patent No:

201631015526 dated

on 4th May 2016

14 Mishra SC, G.S.

Sinha, M Sharma, N

Mishra, P.

Mahanta,

Self-Aspirated Pressurized

Kerosene Cooking Stove

with a Porous Radiant

Burner,

Application No:

201631037245 dated

on 31st October

2016.

15 G.S. Sinha, L K

Kaushik M Sharma,

N Shanmuga Priya,

S Kanagaraj

Self-Aspirated Pressurized

Kerosene Cooking Stove

with a Porous Radiant

Burner with Nanoparticles

blended.

Application No:

201831003156

(TEMP/E-

1/3419/2018-KOL)

dated on 27th Jan

2018

15. Awards and honours (Only awards/honours at national/international level from reputed organisations)

Name of

Faculty

Name of

Award

Name of Institute/

Organization/ Foundation

bestowing the award

Reason for award

Form of

Award

(Citation/

Medal/ Cash

etc)

U,S, Dixit Guest of honor

Technical festival of NIT

Agartala Cerificate

U,S, Dixit Chief Guest


Advances and Soft

Computing Applications in

Design and Manufacturing, 4-

6 June, 2018 at NIT Patna

Gautam

Biswas

Honorary

Doctorate

Aristotle University of

Thessaloniki, Greece on Nov

02, 2018

of 44

S K Kakoty

Education

Leadership

Award

Business School Affaire &

Dewang Mehta National

Education Awards Certificate

U.S. Dixit Best paper

award AIMTDR

Paper quality adjudged best: G.C. Verma,

P.M. Pandey and U.S. Dixit, Experimental

investigations to evaluate machining

accuracy of ultrasonic assisted milling on

thin-walled structures, 7th International and

28th All India Manufacturing Technology,

Design and Research (AIMTDR)

Conference, December 13-15, 2018, Anna

University, Chennai.

Cerificate

and free e-

books from

Springer

P

Muthukumar

Best Paper

Award by PhD

student

Mr Mrinal

Bhowmik

IISc Bangalore

at THERMACOMP

conference

Best paper award Certificate

and medal

M. Pandey Session Chair

Joint 19th International Heat

Pipe Conference and 13th

International Heat Pipe

Symposium, Pisa, Italy, June

10-14, 2018

16. Students’ Achievements:

Name of Faculty Name of

Award

Name of Institute/

Organization/

Foundation bestowing

the award

Reason for award (Name of Paper,

if applicable)

Form of Award

(Citation/ Medal/

Cash etc)

Amaresh Dalal

Best Paper

Award (to

student

Bhaskarjyoti

Sarma)

7th International and

45th National

Conference on Fluid

Mechanics and Fluid

Power

Sarma, B., Basu, D. N., and Dalal, A.,

2018, “Universal Scaling Laws in

Drop-on-demand Generation from A

Yarn”, Paper No. FMFP2018-467,


and 45th National Conference on

Fluid Mechanics and Fluid Power,

December 10-12, 2018, Indian


Mumbai, India.

Citation

Amaresh Dalal

Best Oral

Presentation

Award for the

Session (to

student

Hiranya Deka)

International

Conference on Recent

Innovations and

Developments in

Mechanical Engineering

Deka, H., Biswas, G., and Dalal, A.,

2018, “A Coupled Level Set and

Volume-of-fluid Method for

Modelling Two-phase Flows”, Paper

No. IC-RIDME18: 194, International

Conference on Recent Innovations

and Developments in Mechanical

Engineering, National Institute of

Technology Meghalaya, Shillong,

India, November 8-10, 2018.

Citation

Amaresh Dalal

Best Oral

Presentation

Award for the

Session (to

student Subrat

Kotoky)

International

Conference on Recent

Innovations and

Developments in


Kotoky, S., Dalal, A., and Natarajan,

G., 2018, “The Role of Particle

Diameter on the Fluidization

Behavior in a Bubbling Gas-Solid

Fluidized Bed”, Paper No. IC-

RIDME18: 203, International

Conference on Recent Innovations

and Developments in Mechanical

Engineering, National Institute of

Technology Meghalaya, Shillong,

India, November 8-10, 2018.

Citation

P

MUTHUKUMAR

Best paper

award IISc Bangalore, India

Mrinal Bhowmik, P. Muthukumar, R

Anandalakshmi “Numerical Study on

Dehumidification Performance of a

of 44

Cross-Flow Liquid Desiccant

Adiabatic Dehumidifier with Various

Halide Salt desiccants” 5th


Computational Methods for Thermal

Problems, .”

M R Sankar

Best poster

award (1st)

Research Conclave'


Technology Guwahati,

India

Kishor Kumar Gajrani,Y. Bishal

Singha, Mamilla Ravi Sankar,

Comparative Tribological

Performance of Graphite, CaF2 and

MoS2 Coated Mechanical Micro-

Textured Cutting Tool Material

during Dry Sliding Test.

M R Sankar

Best poster

award (2nd)

Research Conclave'


Technology Guwahati,

India

Rasmi Ranjan Behera, A. Das, D.

Pamu, L.M. Pandey, Mamilla Ravi

Sankar, Calcium Phosphate Coating

on Ti-6Al-4V alloy using RF

magnetron Sputtering Process.

S Senthilvelan

Outstanding

Paper Award

FISITA 2018 Word

Auotmotive Congress

Aditya Kumar, Karthick Pandia, S

Senthilvelan BENDING FATIGUE

PERFORMANCE OF INJECTION-

MOLDED CARBON NANOTUBE

REINFORCED POLYPROPYLENE

SPUR GEARS

Sachin Singh

Gautam

2nd Best

Presentation

Award (to

student D.

Bora)

2nd International

Conference on

Structural Integrity and

Exhibition 2018

Ductile fracture in tube impact

problem using a Lode angle

dependent failure criterion by D.

Bora, M. Kumar and Sachin Singh

Gautam

Certificate and

Cash prize of 2500

Rs

Sachin Singh

Gautam

Best Paper

Award (to

student Vishal

Agrawal)

1st International

Conference on Future

Learning Aspects of


(FLAME - 2018),

Amity University,

Noida,

An isogeometric based study of

mortar contact algorithm for

frictionless sliding by Vishal Agrawal

and Sachin Singh Gautam

Sanghamitra Das

Best poster

award

Recent Innovations and

Developments in


(IC-RIDME-2018)

November 8-10, 2018 at

NIT Meghalaya.

Three-

Dimensional

Numerical

Modelling of

Temperature

Profiles on the

Wire Electrode

During Wire

Electric Discharge

Machining Process

S Kanagaraj

International

Travel Award

DST International travel

award committee

To attend International Conference

on Materials Science and

Manufacturing Engineering (MSME

2018), 8-10 Nov, 2018, Novotel Paris

Centre Tour Eiffel, Paris, France

Certificated and

Medal

P

MUTHUKUMAR

Best paper

award for Mr

Mrinal

Bhowmik

IISC Bangalore, India

- THERMACOMP –

2018 Best Paper and Presentation

P

MUTHUKUMAR

International

Travel Award

for Mr Nithin

Narmada

To attend and present a

paper at 10th

International

Conference on Applied

Energy (ICAE2018),

22-25 August 2018,

Hong Kong.

To attend 10th International


(ICAE2018), 22-25 August 2018,

Hong Kong.

of 44

KSRK Murthy

Best Paper

Award (to

student Sajith

S)

3rd International

Conference on Design,

Analysis,

Manufacturing &

Simulation (ICDAMS-

2018), 6-7 April,

Chennai

Certificate

17. Any Other (Special Mention)

18. Faculty Members (In alphabetical order according to surname)

Sl.

No. Name

Name of the

University/Institute/Org

PhD degree received

from

Designation Areas of Interest

Date of

joining (Not

Internal

Promotion)

for the

faculty

members

who joined

during the

reporting

year

1 Bag, Swarup IIT Bombay Associate

Professor

Fusion welding processes,

Finite element method, Laser

micro joining, Heat transfer

and fluid flow in fusion

welding, Residual stress and

distortion, Recrystallization

in hot metal forming process,

Optimization in

manufacturing process

2011

2 Bandopadhya,

Dibakar

IIT Kanpur Associate

Professor

Active materials, Artificial

muscle materials, Smart

structures, Robotics and

mechanism, Composites,

MEMS, Bio inspired design

2008

3 Banerjee,

Atanu


Professor

Complaint Mechanism,

Shape memory alloy, Bio-

memetic devices

2010

4 Basireddy,

Sandeep Reddy

IISc Bangalore Assistant

Professor

Nonlinear Dynamics of

Mechanical Systems,

Robotics and Control,

Applied Dynamics

2018

5 Basu, Dipankar

Narayan

IIT Kharagpur Associate

Professor

Nuclear Thermalhydraulics,

Supercritical Natural

Circulation Loops, Domestic

Air-conditioning,

Computational Fluid

Dynamics and Heat Transfer

2012

6 Biswas, Pankaj IIT Kharagpur Associate

Professor

Manufacturing and Design:

Computational weld

mechanics, Solid state

welding, Soft computing

modeling of welding

processes, FEM, Line

heating

2011

of 44

7 Biswas,

Gautam

IIT

Kharagpur

J C Bose

National

Fellow and

Director of the

Institute;

Professor

Computational Fluid

Dynamics, Convective Heat

Transfer, Turbulence,

Boiling Heat Transfer, Heat

Transfer Augmentation,

Turbomachinery

2013

8 Chakraborty,

Debabrata

IIT Kharagpur Professor FRP, Composites, FEM,

Fracture Mechanics and

Design

1999

9 Dalal, Amaresh IIT Kanpur Associate

Professor

Computational Fluid

Dynamics, Heat Transfer,

Structured Grid Techniques

in Curvilinear Coordinates,

Finite Volume Methods and

Unstructured Grid

Techniques, Natural and

Mixed Convection Flows,

Electrochemical Energy

Conversion and Storage

2010

10 Das, Manas IIT Kanpur Associate

Professor

Advanced Finishing and

Nano-finishing Processes,

Non-traditional Machining

Processes, Machining of

Advanced Engineering

Materials,

Micromanufacturing,

Micromachining, Tribology,

Laser Welding

2012

11 Dass, Anoop K. IISc

Bangalore

Professor Computational Fluid

Dynamics and

Turbomachines

1996

12 De, Arnab

Kumar


Professor

Numerical Methods in Fluid

Flow and Heat Transfer,

Convection, Turbulence

2009

13 Dixit, Uday S. IIT Kanpur Professor Design and Manufacturing :

FEM, Neural Network and

Fuzzy Set Application;

Mechatronics

1998

14 Dwivedy,

Santosha K.

IIT Kharagpur Professor &

HOD

Non-linear Dynamics,

Design and Robotics,

vibrations

1999

15 Gautam, Sachin

S.

IIT Kanpur Assistant

Professor

Design and Manufacturing :

Nonlinear Finite Element

Analysis, Computational

Contact Impact Analysis,

Adhesion, Rough Surfaces,

Time Integration Schemes,

Mixed Time Integration

Schemes, Plasticity, Ductile

Fracture, Continuum

Damage Mechanics

2013

16 Hazarika,

Shyamanta M.

University of Leeds,

England

Professor Robotics, Cognitive Systems,

Knowledge Representation

and Reasoning

2017

17 Joshi,

Shrikrishna N.

IIT Bombay Associate

Professor

Micro fabrication: Laser

micro forming, Micro

machining: Micro electric

discharge machining (EDM),

Web based manufacturing,

Process modeling and

optimization of advanced

manufacturing processes,

2010

of 44

Application of soft

computing techniques in

manufacturing

18 Kakoty,

Sashindra K.

IIT Kharagpur Professor &

Dean,

Infrastructure,

Planning and

Management

Tribology, Duct Acoustics,

Mechanical System Design,

Rural Technology

2000

19 Kalita, Karuna University of

Nottingham

Associate

Professor

Rotordynamics, Coupled

Dynamics of Electro-

Mechanical Systems,

Vibration

2010

20 Kanagaraj, S. IIT Kharagpur Professor Biomaterials, Carbon

nanotubes based

nanocomposites, Nanofluids,

Materials characterization

2008

21 Kapil, Sajan IIT Bombay Assistant

Professor

Rapid Manufacturing (3D

Printing), Welding/Cladding

Processes, CNC,

Manufacturing Automation

2018

22 Khanikar,

Prasenjit

North Carolina State

University

Assistant

Professor

Microstructural Materials

Modeling, Micro-mechanics,

Dislocation Density Based

Crystal Plasticity,

Deformation and Failure

Mechanisms of Metallic

Materials, Finite Element

Method, Dynamic Behavior

of Materials, Fracture

Mechanics, Aluminum

Alloys, Microstructural

Characterization

2015

23 Kore, Sachin

D.


Professor

Experimental and numerical

study of electromagnetic

pulse processing, Solid state

welding, Joining of similar,

dissimilar and lightweight

metals like Al, Steel, Al-Li,

and Mg

2009

24 Kulkarni,

Vinayak

IISc Bangalore Associate

Professor

High enthalpy flows,

scramjet engine,

experimental, aerodynamics,

measurement science, CFD

simulations

2008

25 Kumar,

Bhaskar


Professor

Hydrodynamic Stability,

Bluff Body Flows,

Computational Fluid

Dynamics

2015

26 Kumari,

Poonam

IIT Delhi Associate

Professor

Theory of plates and shells,

Computational mechanics,

Smart structures

2013

27 Madhusudhana,

Gavara

IISc

Bangalore

Assistant

Professor

Computational Fluid

Dynamics, Heat Transfer,

Cooling of Electronics,

Multi-phase flows, Cooling

at Micro/Mini scales,

Turbulent Fluid Flow and

Heat transfer

2012

28 Mahanta,

Pinakeswar

IIT Guwahati Professor Thermal Radiation with

Participating Media,

Fluidization, Energy

2001

of 44

Conservation and Renewable

Energy

29 Mehta,

Balkrishna


Professor

Experimental investigation

of heat transfer in two-phase

flow in mini/micro systems,

Heat pipes, Thermosyphons,

Heat transfer investigation of

ferrofluids in presence of

magnetic field, InfraRed

thermography for

temperature measurements.

2015

30 Mondal, Pranab

Kumar

IIT Kharagpur Assistant

Professor

Microfluidics,

Electrokinetics, Two Phase

Transport, Microscale

Transport of Heat, Flow

Through Porous Media.

2015

31 Murthy, K. S.

R. Krishna

IIT

Kharagpur

Professor Finite Element Methods,

Error Estimation and

Fracture Mechanics

2002

32 Muthu, Nelson IIT Bombay and

Monash University

Assistant

Professor

Meshfree Methods, FEM,

Fracture Mechanics,

Composites, Structural

Health Monitoring, Medical

Device Innovation

2017

33 Muthukumar,

P.

IIT Madras Professor Coupled heat and mass

transfer analysis; Metal

hydride based thermal

machines, Conventional and

Non-conventional

refrigeration systems

2006

34 Nandy, Arup IISc Bangalore Assistant

Professor

Finite Element Development

and Analysis in Structure,

Acoustics, Electromagnetics,

Structural acoustic

interaction,

Magnetohydrodynamics,

MEMS; Optimization

2017

35 Narayanan,

Ganesh R.


Professor

Material Forming and

Joining

2007

36 Natarajan,

Ganesh

IISc Bangalore Associate

Professor

Computational Fluid

dynamics, Grid Adaptation,

Error Estimation, Immersed

Boundary methods, Parallel

computing, Biofluid

dynamics

2011

37 Pal, Sukhomay IIT Kharagpur Associate

Professor

Welding Process Monitoring

and Control, Tool Condition

Monitoring, Non-

Conventional Machining

Process Application of

Artificial Neural Network,

Genetic Algorithms and

Fuzzy logic in manufacturing

2010

38 Panda, Satyajit IIT Kharagpur Associate

Professor

Composite materials,

Nonlinear vibrations, Smart

materials and structures,

FEM, Functionally Graded

materials and structures,

Micromechanics.

2009

39 Pandey,

Manmohan

IIT Kanpur Professor Dynamics and Control of

Fluid-Thermal Systems,

2000

of 44

Nuclear Reactor Thermal-

Hydraulics

40 Robi, P. S. IIT Bombay Professor Coating, Fracture Mechanics,

Materials Processing, Metal

Matrix composite, Metal

Casting, P/M Processing

1997

41 Saha, Ujjwal K. IIT Bombay Professor Propulsion, Turbomachinery,

Wind Energy Conversion,

Internal Combustion Engines

2000

42 Sahasrabudhe,

Anil D.

IISc Bangalore Professor (On

deputation as

Chairman of

the All India

Council for

Technical

Education)

Vibration and Noise,

Condition Monitoring,

CAD/CAM

1995

43 Sahoo,

Niranjan

IISc

Bangalore

Professor Fluid and Thermal

Engineering, Aerodynamics,

Gas Dynamics,

Instrumentation,

Measurements and

Experiments in Fluid

2004

44 Sankar, Ravi

M.


Professor

Machining & Advanced

Machining Processes,

MEMS &

NEMS, Sustainable

Machining,

Micromanufacturing,

Composite Materials, Online

monitoring of

Manufacturing Processes,

Tribology, Precision

Engineering

2012

45 Senthilvelan, S. IIT Madras Professor Composites, Fatigue, Wear

and Failure Analysis

2006

46 Sharma,

Deepak


Professor

Optimal Design: Modeling

and Computation,

Engineering Design and

Optimization, Genetic

Algorithms, Multi-objective

Optimization

2012

47 Tiwari, Rajiv IIT Kanpur Professor Rotor Dynamics, Vibrations,

Identifi cation in

Mechanical Systems, Rolling

Element Bearing Design

and Analysis, Application of

Active Magnetic Bearings

in Rotors, Vibrations based

Condition Monitoring of

Industrial Rotating Machines

1997

(PERIOD: 1 APRIL 2018 31 MARCH 2019)

Documents

Transcript of (PERIOD: 1 APRIL 2018 31 MARCH 2019)