Perimaliter® II Polycarbonate — PVL II Series · Perimaliter® II Polycarbonate — PVL II...
2
Perimaliter® II Polycarbonate — PVL II Series The Perimaliter is an energy saving area luminaire that combines efficient lighting, and aesthetic appearance. It is designed for maximum spacing between luminaires and can provide good uniformity at a six to one spacing to mounting height ratio, utilizing energy efficient HID lamps. Lighting Applications The Perimaliter Series is ideally suited for security lighting applications as well as commercial and architectural exterior wall and area lighting for parking lots, office building, stores, shopping centers, fast food restaurants, banks, warehouses, and parking garages. Front Access Lens/Door Assembly Removable, one piece, injection molded, UV stabilized polycarbonate door and prismatic lens for full front access. Interior door surface finished in bronze. Door can withstand high impact and interior paint finish will not scratch or mar. Rear Housing One-piece, heavy duty, die cast aluminumfor long life and cooler operation. Bronze Lektrocote® finish is standard. Mounts over 3 1/2" or 4" recessed junction box. Two 1/2" side entries for surface conduit mounting. Reflector Precision formed specular aluminum for optimum performance. Ballast Class H insulated, -40°F starting (-20°F for MH), 60 Hz HPF. An aluminum ballast compartment cover isolates electrical components from the optical assembly NRTL/C Nationally recognized testing laboratory listed. Full compliance to both UL and CSA standards. For use in damp or wet locations Additional Features • Bronze Lektrocote® finish • Side photocontrol hub (order field installed PBT Series) • Accessory mounting bracket for single and double pole mounted Perimaliter luminaires (PVL-PT) • Porcelain mogul base socket • Through branch rated, 90° C wire needed • Max ambient 25° C ORDERING INFORMATION Catalog Number Wattage Voltage/Ballast Weight Ibs. ^^^ISs^^l HIGH PRESSURE SODIUM PVL-070S-128 PVL-070S-521L 1 PVL-1 DOS-128 PVL-100S-521L 1 PVL-1SOS-128 3 PVL-1 50S-521L 1 1- PVL-070H-128L 1 PVL-1 OOH-128L 1 PVL-1 75H-1 28 2 - 3 70 70 100 100 150 150 70 100 175 Quad/AL (HPF) 120/Reactor (NPF) Quad/AL (HPF) 120/Reactor (NPF) Quad/AL (HPF) 120/Reactor (NPF) METAL HALIDE Quad/PLA (HPF) Quad/PLA (HPF) Quad/PLA (HPF) 17 12 18 12 18 12 23 23 24 7.2 5.5 8.2 5.5 8.2 5.5 10.3 10.3 10.8 1. Lamp included. 2. Mercury Vapor lamps may be operated on MH ballast. 3. Now available in 480V - Change 8 to 5. Note: For electrical data, see HID Ballast Data starting on page 610. Note: For Tri -Tap® (120, 277, 347V) change 8 to 6. (For Quad-Tap ballasts 208 & 240V, not CSA) Note: Accessories must be ordered separately. See Accessories on page 532. Hubbell Lighting, Inc. 531
Transcript of Perimaliter® II Polycarbonate — PVL II Series · Perimaliter® II Polycarbonate — PVL II...
Perimaliter® II Polycarbonate — PVL II SeriesThe Perimaliter is an energy saving area luminaire thatcombines efficient lighting, and aesthetic appearance. It isdesigned for maximum spacing between luminaires andcan provide good uniformity at a six to one spacing tomounting height ratio, utilizing energy efficient HIDlamps.
Lighting ApplicationsThe Perimaliter Series is ideally suited for security lightingapplications as well as commercial and architecturalexterior wall and area lighting for parking lots, officebuilding, stores, shopping centers, fast food restaurants,banks, warehouses, and parking garages.
Front Access Lens/Door AssemblyRemovable, one piece, injection molded, UV stabilizedpolycarbonate door and prismatic lens for full front access.Interior door surface finished in bronze. Door canwithstand high impact and interior paint finish will notscratch or mar.
Rear HousingOne-piece, heavy duty, die cast aluminum for long life andcooler operation. Bronze Lektrocote® finish is standard.Mounts over 3 1/2" or 4" recessed junction box. Two 1/2"side entries for surface conduit mounting.
ReflectorPrecision formed specular aluminum foroptimum performance.
BallastClass H insulated, -40°F starting (-20°F for MH), 60 HzHPF. An aluminum ballast compartment cover isolateselectrical components from the optical assembly
NRTL/CNationally recognized testing laboratory listed. Full
compliance to both UL and CSA standards.For use in damp or wet locations
Additional Features• Bronze Lektrocote® finish• Side photocontrol hub
(order field installed PBT Series)• Accessory mounting bracket for single and double pole
mounted Perimaliter luminaires (PVL-PT)• Porcelain mogul base socket• Through branch rated, 90° C wire needed• Max ambient 25° C
ORDERING INFORMATIONCatalog Number Wattage Voltage/Ballast Weight
Ibs. ^ ISs lHIGH PRESSURE SODIUM
PVL-070S-128PVL-070S-521L 1
PVL-1 DOS-128PVL-100S-521L 1
PVL-1 SOS-1283
PVL-1 50S-521L1
1-PVL-070H-128L 1
PVL-1 OOH-128L1
PVL-1 75H-1 28 2-3
7070100100150150
70100175
Quad/AL (HPF)120/Reactor (NPF)Quad/AL (HPF)120/Reactor (NPF)Quad/AL (HPF)120/Reactor (NPF)
METAL HALIDEQuad/PLA (HPF)Quad/PLA (HPF)Quad/PLA (HPF)
171218121812
232324
7.25.58.25.58.25.5
10.310.310.8
1. Lamp included.2. Mercury Vapor lamps may be operated on MH ballast.3. Now available in 480V - Change 8 to 5.Note: For electrical data, see HID Ballast Data starting on page 610.Note: For Tri -Tap® (120, 277, 347V) change 8 to 6.
(For Quad-Tap ballasts 208 & 240V, not CSA)Note: Accessories must be ordered separately. See Accessories on page 532.
Hubbell Lighting, Inc.531
Perimaliter® II Polycarbonate — PVL II Series
ACCESSORIES - Must be ordered separatelyCatalog Number Description
FUSE-5A____Single in-line fuse and holder for 5 amp fusing protection. m *FUSE-10APBT-1PBT-234PBT-6
Single in-line fuse and holder for 10 amp fusing protection.Photocontrol, 120VPhotocontrol, 208, 240, 277VPhotocontrol 347V
PVL PT Aluminum slipfitter housing accepts 2-3/8" OD tenon for single or back to back double, post-top_________mounted Perimaliter luminaires. Bronze Lektrocote finish. EPA: 1.8 sq. ft. with fixtures._____PVLV Full cutoff visor - formed aluminum - bronze finishWG-M Wire basket guard enclosing entire fixture
OPTIONS: Factory installed — add appropriate suffix
-EM-QSS-RS
DescriptionDouble contact socket for remote power (less lamp) all unitsQuartz restrike system including relay (less lamp) all unitsHot restrike system, quickly restores main lamp output after power outage. HPS only.
**. «
•
B
*
r1/2" feed thru surfacehub conduit
PVL II Series
14 1/2"368 mm
14"356 mm
7 1/8"181 mm
6"191 mm
B
A F
PVL-PT
2 V62 mm
2 1/2"64 mm
13 3/4"349 mm
13 1/4"337 mm
5"127 mm
Hubbell Lighting, Inc.532
