PERGOLA 80x40

80x40

• Flat awning for terraces that lets you enjoy the outdoor and create new private spaces protected from the sun.

• Setting of various models according to the specific needs of each installation.

80x40

• Versatility• Adaptation to any kind of

space• Compatibility with perimetral

closing systems.

80x40

• Unique space full of light but with3% less heat

• Inclination of fabric (to drain thewater laterally).

• Like for ZEN system, Gaviota offers the possibility of installing an overhead canvas to protect and create a thermal insulation chamber.

80x40

Operation:

Motor cable ManualMotor cog belt

1. Between walls

80x40

Assembling options :

2. To ceiling (only manual)

80x40

Assembling options :

3. To wall 1 level

80x40

Assembling options :

80x40

Assembling options :

4. To wall 2 levels

80x40

Assembling options :

5. Pergola 1 level (motor cable or manual)

80x40

Assembling options :

6. Pergola 2 levels (motor cable or manual)

7. To ceiling porche

80x40

Assembling options :

80x40

80x40

HomologationWind resistance Class 3

80x40

Profiles and accessories

80x40

80x40

80x40

80x40

80x40

80x40

80x40

- Guide profile 80x40

80x40

80x40

80x40

80x40

80x40

80x40

80x40

80x40

80x40

80x40

80x40

80x40

80x40

80x40

80x40

80x40

80x40

80x40

80x40

80x40

80x40

80x40

80x40

80x40

- Telescopic sliding flange:

• Mín. A= 106mm • Máx. A= 157mm

80x40

80x40

80x40

80x40

80x40

80x40

80x40

80x40 manual

• Between walls• To ceiling• To wall 1 level• To wall 2 levels• To ceiling porche 1 level• To ceiling porche 2 levels• Pergola 1 level• Pergola 2 levels

80x40

80x40

- Double pulley- Corner double pulley

80x40

80x40

80x40

80x40 motorized cable

80x40

• Between walls• To ceiling• To wall 1 level• To wall 2 levels• Pergola 1 level, 2 levels• To ceiling porche 1 level• To ceiling porche 2 level

80x40

80x40

80x40

- Cut the tube 10 cm less thanthe istance between guides.

80x40

- Insert the aluminium pulleys

- Insert the motor and the cap

80x40

- Fix the bearing support

- Fix the motor support

80x40

- Put the tube between guides

- Put the frontal pulleys, their center has to coincide with the center of threaded pulleys.

80x40

- Take the fqabric profiles to the frontal part

- Put the cable fixation for the firstfabric profile and the steel cable.

80x40

- Provide current to the motor, turndirection for opening.

- Pass the cable into pulley.

- Make double turn with steel cable, keeping it in the closest way to the tubeside.

80x40

- Pass the cable to the tensor ring and fix it with screw.

- The cable has to be stretched first byhand, once it is done, we will stretch itwith the tensor, it has to be equal onboth sides.

80x40

80x40 motorized cog belt

80x40

• Between walls• To wall 1 level• To wall 2 levels

80x40

Maximum dimensions : 4 X 4 m

Motor: Cross 30/15 S45

80x40

80x40

Maximum dimensions: 6 X 4 m

Motor: Cross 40/15 S45

80x40

80x40

-Adjustable wall bracket

80x40

80x40

80x40

80x40

- Cog belt

80x40

80x40

80x40

80x40

80x40

80x40

80x40

Flat hood

80x40

• Between walls• To wall 1 level• To wall 2 levels• Pergola 1 level manual• Pergola 1 level motor cable

80x40

80x40

80x40

80x40

Flat hood Z

For motorized pergolas:• Zen Rain• Zen • 80x40 with cog belt

80x40

- Flad hood Z profile

80x40

80x40

- Flat hood Z lateral covers inclined

80x40

- Flat hood Z lateral covers

80x40

80x40

- Supports flat hood Z

80x40

- Rubber profile

80x40

80x40

80x40

Lattice

80x40

80x40

80x40

80x40

80x40

80x40

NOTA: Copyright GAVIOTA SIMBAC S.LLas fotografías, ilustraciones and textos de este catalogo son de propiedad de GAVIOTA SIMBAC S.L and pueden ser utilizados, copiados o reproducidos de ningún modo o por cualquier medio, salvo consentimiento expreso previo de GAVIOTA SIMBAC, S.L.