Performing the Urinalysis

30
Performing the Urinalysis Laboratory Procedures

description

Performing the Urinalysis. Laboratory Procedures. Analyzing the Urine Sample. A complete urinalysis usually involves 3 steps. 1. Checking and recording the physical characteristics of the urine 2. Performing a chemical analysis using a multi-test dipstick - PowerPoint PPT Presentation

Transcript of Performing the Urinalysis

Page 1: Performing the Urinalysis

Performing the Urinalysis

Laboratory Procedures

Page 2: Performing the Urinalysis

Analyzing the Urine Sample A complete urinalysis usually involves

3 steps. 1. Checking and recording the physical

characteristics of the urine 2. Performing a chemical analysis using a

multi-test dipstick 3. Centrifuging a small portion of the

sample and examining the sediment under a microscope

Page 3: Performing the Urinalysis

1. Checking and recording the physical properties of the urine Physical properties include:

Color Transparency Odor Specific gravity Volume

Page 4: Performing the Urinalysis

2. Chemical Analysis Many chemical tests can be performed on a small

quantity of urine by using a dipstick

Each pad on dipstick is designed to test for a particular substance in the urine.

When the urine comes in contacts with the reagents, a chemical reaction will cause a color change based on the amount of the substance in the urine.

Color is compared to chart, and approximate amount of substance in urine can be determined

Page 5: Performing the Urinalysis

Several brands of dipstick exist.

Page 6: Performing the Urinalysis
Page 7: Performing the Urinalysis

Chemical analysis Certain drugs and medications may

interfere with chemical tests. Be sure to know any medications

animal is currently receiving when performing a urinalysis.

Page 8: Performing the Urinalysis

Components on the Dipstick Urine pH Protein Glucose Ketones Bilirubin Urobilinogen Blood Nitrites

Page 9: Performing the Urinalysis

Urine pH Number of how acidic or alkaline the urine is pH is affected by diet.

Plant diets can cause alkaline urine High protein diets can cause acidic urine

Small animal pH is usually acidic In general dog and cat urine pH is 6-7

Large animal urine is usually alkaline Other factors may affect urine pH

Fever Starvation Certain drugs

Page 10: Performing the Urinalysis

Protein Healthy animals will usually not have any

protein in their urine although in some cases trace amounts can be found in concentrated dog and cat urine.

The urine protein level must be interpreted along with the Urine specific gravity.

Small amounts of protein are more significant in dilute or unconcentrated urine.

Protein may be lost in the urine due to glomerulopathies, inflammation, or hemorrhage.

Page 11: Performing the Urinalysis
Page 12: Performing the Urinalysis

Glucose If the sugar in the blood is

significantly higher than normal, some excess may be found in the urine.

Normal dog and cat urine should be negative for glucose.

In some cases if the urine is not run immediately, false glucose readings may occur.

Page 13: Performing the Urinalysis

Ketones Ketones are the substances formed in the

body during the breakdown of lipids. Normal pet urine should be negative for

ketones When excess amounts of ketones are

formed, their levels rise in the blood and then are released in the urine.

Can cause CNS depression and acidosis May result in ketonuria caused by:

Starvation Diabetes

Page 14: Performing the Urinalysis

Bilirubin Pigment made by the liver from dead or

dying red blood cells. Small amounts may sometimes be found in

healthy dogs. Dogs can conjugate bilirubin in their kidneys, so

small amount may be insignificant. Bilirubin found in cat urine is a concern and

can be a sign of liver disease, bile duct obstruction, or hemolysis.

Page 15: Performing the Urinalysis

Urobilinogen Compound formed from bilirubin by

intestinal tract. Normal dogs and cats have small amounts

of urobilinogen in their urine. Results from dipstick are not considered

very accurate and may be difficult to interpret.

Usually recorded as “normal” or “abnormal”.

Page 16: Performing the Urinalysis

Blood Healthy pets may have a

few red blood cells in their urine, but greater than ~5 cells per field may indicate a problem.

Hematuria can be due to a number of causes: Trauma Urinary Tract Infection (UTI) Bladder Stones Blood Clotting Problems

Page 17: Performing the Urinalysis

Blood cells in the Urine

Page 18: Performing the Urinalysis

Nitrites May be produced by the bacteria

present in some infections Test often shows a “false negative”

and is considered inaccurate in pets. However, if positive, should examine

sediment closely for bacteria.

Page 19: Performing the Urinalysis

Examining Urine Sediment After urine sediment is centrifuged

(generally about 5 minutes), the top portion of the liquid is poured off and the sediment is resuspended and examined microsopically.

Indications for sediment exam include: Provides additional information A form of cytology Must be interpreted with other clinical data,

including physical and chemical composition of the urine.

Page 20: Performing the Urinalysis

Urine Sediment Exam Procedure 1. Collect urine in a clean container 2. Throughly mix specimen and transfer 3-5

ml volume to a centrifuge tube 3. Centrifuge for 3-5 mins 4. Pour off supernatant 5. Leave approximately 0.5 ml of

supernatant 6. Resuspend urine sediment by tapping

tube or flicking it w/ your finger. 7. Examine a stained or unstained

sediment. (Or both!)

Page 21: Performing the Urinalysis

Potential Sediment Elements White blood cells Red blood cells Lipid droplets Bacteria Crystal Casts

Page 22: Performing the Urinalysis

White blood cells Larger than normal numbers of white

blood cells may indicate inflammation from a bladder or kidney infection.

Page 23: Performing the Urinalysis

Lipid Droplets Are common in the sediment of urine,

especially in cats. Number and size may vary Should not be confused w/ air bubbles or RBC’s. They will be infocus when other structures are not.

Page 24: Performing the Urinalysis

Bacteria Sediment is examined for presence of

bacteria Small amounts may be due to

contamination, large amounts may indicate bladder infection (especially if sample is obtained via cystocentesis).

A urine culture and sensitivity may indicated with large amounts of bacteria.

Page 25: Performing the Urinalysis
Page 26: Performing the Urinalysis

Crystals Made up of minerals and can

sometimes be found in the urine. Under certain conditions, crystals can

clump together to form bladder stones (uroliths).

The pH of the urine may influence the type of crystal development

Some animals and species are more predisposed to crystal and stone formation.

Page 27: Performing the Urinalysis

Common Crystal Types Struvite Calcium Oxalate Ammonium Urate

Page 28: Performing the Urinalysis

Casts (These will be covered in depth in Clin-Path!)

Urine Casts are small cylinder-shaped formations of cells and debris from inside the tubules of the kidneys

Presence and composition of casts can indicate kidney function

Types of casts: Hyaline Granular Waxy Fatty Cellular Mixed Bile stained

Page 29: Performing the Urinalysis

Specific Gravity Measures the concentrating ability of the

kidney. Done with a refractometer

There may be a spot on the dip-stick for SG, however in animals, these are not valid results.

Page 30: Performing the Urinalysis

Specific Gravity “normals” p. 158 Lab bk

“Normal” values in dogs is between 1.001-1.060 “Normal” values in cats can range from 1.001 – 1.080 There is no set “normal” value in animals, however the

following guidelines should be used: SG: below 1.008 is said to indicate dilution (hyposthenuric) SG: 1.008-1.012 is said to be fixed or isosthenuric (same SG as

plasma) SG: 1.013 – 1.030 is considered normal if no dehydration

suspected. SG: above 1.025 implies renal tubule concentration ( in cats, this

can indicate renal disease)