performance right across the range - Sep Sci...performance right across the range ... Simply nudge...

Versatile, proven

performance right

across the rangeThe SORVALL® Superspeed® choice.

Leading-edge technology, highest performance andmaximum capacity for the fastest processing in the industry.

• Speeds to 26,000 rpm (70,450 x g)• Process 6 liters of sample in a single run• Imbalance tolerant DuraFlex™ gyro drive• Vacuum-free operation• RCF control allows set and display of g-force• Advanced model with AFM™ enhances system capabilities• Choice of operator interface: rotary knobs

or soft-touch keypad• Wide choice of rotors including 6 liter SUPER-LITE®

composite, ColorTone® and RX™ Rapid Access rotors

From a high performance, high capacity floormodel to a compact, multi-tasking benchtop unit,the SORVALL® Superspeed® centrifuge rangeoffers models to suit the entire spectrum of highspeed research and production requirements.

Our Superspeeds couple the performance levelyour laboratory requires with the widest selectionof rotors for unprecedented applications versatility.

Add to that the unique advantages of vacuum-freeoperation, our patented gyro drive and the flexibilityof no bolt down operation, and you’ll appreciatewhy SORVALL models make up the world’slargest installed base of Superspeed centrifuges.

Renowned for their dependability and ease of use,SORVALL® Superspeeds are engineered forreliable operation that yields consistent results,day after day, year after year.

User-friendly controls make set-up and operationsimple even for inexperienced users, speeding upparameter setting and reducing errors.

The SORVALL Superspeed centrifuge range offersperformance, versatility and choice. It’s backed bythe reliability upon which the SORVALL namehas been built, together with the technical andapplications support expertise that only half acentury’s experience in the industry can bring.

2 3

Our popular ‘workhorse’ Superspeed, with the performancefor most research needs, now has a brushless DC gyro drive.

• Speeds to 21,000 rpm (51,430 x g)• NEW brushless DC motor for faster

acceleration/deceleration and reduced maintenance• Imbalance tolerant gyro drive• Vacuum-free operation• Automatic RCF calculation and display• Automatic rate control for gentle separations• Simultaneous digital display of set and actual parameters• Wide choice of rotors including 4 liter SUPER-LITE

composite, ColorTone and RX Rapid Access rotors

Practical and easy to use, with rugged, reliable operation.An economical choice for any laboratory.

• Speeds to 21,000 rpm (51,430 x g)• Imbalance tolerant gyro drive• Vacuum-free operation• Rotary knob for quick parameter setting• Simultaneous analog display of set and actual parameters• Wide choice of rotors including 4 liter SUPER-LITE


The versatile SUPER T 21 offers the capabilities of aSuperspeed, a refrigerated microcentrifuge and a highcapacity Lowspeed, all in a single benchtop system.

• Speeds to 21,000 rpm (49,555 x g)• Compact 35” x 25” (890 mm x 640 mm) footprint• Large 3-liter capacity for high volume processing • Standard and deepwell microplate processing• Microprocessor control and digital LED displays• Maintenance-free, brushless DC direct drive system • Wide choice of rotors including ColorTone rotors

Evolution® RC Basic and AdvancedSuperspeed centrifuges

RC-5C PLUSSuperspeed centrifuge

RC-5B PLUSSuperspeed centrifuge

SUPER T 21 benchtopSuperspeed centrifuge

Superspeed Brochure 24/4/03 3:44 pm Page 4

The SORVALL�

Superspeed�

advantage

Perfomance and capacity for every application

Unmatched rotor optionsThe industry’s widest rotor range – spanningfixed-angle, swinging bucket, vertical, microtube,zonal and continuous flow types – meansunrivalled levels of Superspeed® versatility.

Lightweight SUPER-LITE® aluminiumand composite rotors have enhanced rotorperformance and sample capacity. UniqueSORVALL® ColorTone® and RX™ Rapid Accessrotors maximize convenience and productivity.

Most rotors can be used in any SORVALLfloor model Superspeed, giving you maximumflexibility and long-term value with your rotorinvestment.

Vacuum-free operationSORVALL Superspeeds reach speeds to26,000 rpm without dependence on complex anddelicate vacuum systems. There are no seals orfilters to maintain, and the absence of a vacuummeans less risk of tube and bottle leakage.

No bolt down necessaryUnlike competitive floor models, all containmentrequirements of CE, UL and CSA are met withoutbolt down. Installation is easier, and there’sflexibility to move the instrument from lab to labwithout compromising user safety.

Patented gyro driveSORVALL floor model Superspeeds have drivesystems that employ a patented gyro. This gyrodrive system provides the highest Superspeedimbalance tolerance on the market, allowingsample balancing by eye alone, and protecting themotor from damage should rotor imbalance occur.

If a rotor is unbalanced, the DuraFlex™ gyro flexesin two places to accommodate the misalignment

without damage to the drive shaft or motor.

Service and support foryears of quality performanceTo ensure that you get the very best from yourSORVALL® Superspeed®, we provide exceptionalapplications, technical and after-sales assistance.

Support is available from a dedicated staff ofspecialists including our Applications Scientistswho can help with problem solving and protocoldevelopment.

Our extensive service network is there to helpmaximize instrument up time and productivity,and you can even get on-line support throughour interactive website.

4 5

Low speed sedimentation(Separations up to 4,000 x g)

Mammalian cellsInsect cellsProtozoaBloodCentrifugal filtration columnsMicroplates

High speed pelleting(Separations up to 15,000 x g)

BacteriaYeastAlgaePrecipitates

Subcellular fractionation(Separations from25,000 – 50,000 x g)

Homogenate clarificationSubcellular componantsDNA/RNA precipitation

Virus and biomolecule isolations(Separations up to 70,000 x g)

VirusesProteinsSmall subcellular components

Processing capacity

0 L 1 L 2 L 3 L 4 L 5 L 6L

SUPER T 21

RC-5B/5C PLUS

Evolution® RC

Models in the SORVALL Superspeed range deliver the performance and capacity for a host of bioprocessing, pharmaceutical and research needs.


6 7

SUPER

productivity

Employing leading-edge technology,the Evolution® RC offers unmatchedproductivity with a six liter capacity, speeds to26,000 rpm and simplified sample handling.The bottom line is shorter processing timeswith more throughput – and of course,maximum SORVALL® reliability.

Configure your Evolution RC to match your needsand preferences. Choose an operator interfacewith quick setting rotary knobs or an easy toclean soft-touch keypad. Choose theEvolution RC Basic for simple, intelligentoperation with RunBrowser™, automatic RCF andsimultaneous display of set and run conditions.Or choose the Evolution RC Advanced, whichoffers enhanced functionality plus all the benefitsof the Basic model.

Fastest, easiest processing in the industryWith the SLC-6000 SUPER-LITE® compositerotor, you’ll process 6 liters of sample in a singlerun. Combining speeds to 26,000 rpm with fasteraccel/decel times than competitive instruments,the Evolution RC reduces overall spin times andoptimizes productivity.

Ergonomic design• The deck is only 33 inches (850 mm) from the

ground – the lowest profile on the market – whichmakes the rotor chamber and control paneleasily accessible

• Enjoy hands-free access to the rotor chamber.Simply nudge the chamber door with the rotorand it automatically slides open

• An integratedrotor lid holderprovidesconvenientlid storage,facilitatingaccessto samples

Consistent performanceThe built-in Constant Power System™ (CPS)provides power factor correction to ensure peakinstrument performance even under poor powersupply conditions. Input voltage can vary from187 – 253 V without speed or temperature controldegradation.

Plus, our unique DuoTherm™ system providescontinuous, alternate heating and cooling to holdtemperatures to within 2°C, even in standby.This not only prevents samples from freezing andchamber frost, but also eliminates frequent startingand stopping of the compressor – therebyextending compressor life.

SORVALL® Evolution® RCBasic and Advanced Superspeed® centrifuges.

Evolution RC Basic model with easy clean soft-touch keypad.

Unlike some vacuum-based systems that require additional canisters tosupport the bottle, with the Evolution RC you can simply slide samplebottles into the rotor and run. This reduces handling steps and minimizesthe number of components that could be misplaced or damaged.

• Speeds to 26,000 rpm (70,450 x g)• Process 6 liters of sample in a single run• Imbalance tolerant DuraFlex™ gyro drive• Vacuum-free operation• RCF control allows set and display of g-force• Advanced model with AFM™ enhances system capabilities• Choice of operator interface: rotary knobs

or soft-touch keypad• Wide choice of rotors including 6 liter SUPER-LITE


Evolution RC Advanced with rotary knob control

Advanced FunctionsModule (AFM™) on

Advanced model

RunBrowser™ automaticallystores the last five runs for

easy scanning and retrieval ofrecurring applications

Large, easy to read digital displays continuously showset and run conditions for time, temperature and speed

Rotary knobs for quicksetting (soft-touch keypadoption available)

RCF control allows setting anddisplay of g-force for any rotorand speed combination


8 9

Advanced

Functions Module

(AFM™)

SUPER

reliabilityThe Evolution® RC Advanced adds thefunctionality of the Advanced Functions Module(AFM™) to give multi-user and productionenvironments the benefits of:

A new brushless DC motor in the RC-5C PLUSprovides 30 – 50% faster acceleration/decelerationand reduced maintenance.

The RC-5B PLUS is the economical,easy-to-operate basic 21,000 rpm model inthe SORVALL Superspeed range. It couplessimplicity of operation with the reliability,durability and convenience of a heavy-duty,direct drive motor system.

Keylesscontrolled accessIn multi-user environments:• Limit access to

authorized users only

• Prevent interruptionsduring multi-step processing

In production environments:

• Protect protocol setting for repetitive runs

Programmability• Create and store up to 35

programs in RPM or RCF mode

• Program using RPM or RCF,ACE or standard timed runs

Run-to-runreproducibility• Use ACE™ (ω2dt integrator)

to apply the same totalcentrifugal effect to ensurereproducible separations

• ACE automatically compensatesfor variations in acceleration due to fullor partial rotor loading by adjusting the run time

• Use ACE to assist in establishing protocols

Reduced powerconsumption• Shuts down the major systems -

compressor, fans, etc. and keepscomputer active to reduceenergy consumption duringinactive periods

• Have centrifuge ‘ready when you are’ and reduce energyconsumption too - set instrument to sleep overnight andwake itself up to start equilibriating temperature

• System stays initialized

Multiple language options• Easy set-up of AFM in English, French, German or Spanish

AFM is available as a simple field upgrade toalready installed Evolution RC Basic instruments.

SORVALL®

RC-5C PLUSand RC-5B PLUS

Superspeed®

centrifuges.

Based on the platform that set the industrystandard for high speed centrifugation,the RC-5 Series has a proven track recordfor long life and trouble-free operation.

The fully-featured RC-5C PLUS Superspeed,the popular choice for everyday researchrequirements, just got even better.

• Speeds to 21,000 rpm (51,430 x g)• NEW brushless DC motor for faster

acceleration/deceleration and reduced maintenance• Imbalance tolerant gyro drive• Vacuum-free operation• Automatic RCF calculation and display• Automatic rate control for gentle separations• Simultaneous digital display of set and actual parameters• Wide choice of rotors including 4 liter SUPER-LITE®


• Speeds to 21,000 rpm (51,430 x g)• Imbalance tolerant gyro drive• Vacuum-free operation• Rotary knob for quick parameter setting• Simultaneous analog display of set and actual parameters• Wide choice of rotors including 4 liter SUPER-LITE


RC-5C PLUSSuperspeed centrifuge

RC-5B PLUSSuperspeed centrifuge


10 11

Reliable and

user-friendly

Reliable

The RC-5C PLUS and RC-5B PLUS arerenowned for providing years of dependableoperation.

• The durable, high capacity refrigeration systemmaintains precise operating temperatureswithout the need for a vacuum

• Direct drive motors, with no belts or gears,reduce maintenance and system noise

• The patented gyro system protects the drivefrom damage should rotor imbalance occur

User-friendly

The RC-5C PLUS and RC-5B PLUS aredesigned for simple, easy operation.

• Simple levers or knobs make parametersetting fast and easy

• Both set and actual parameters are visibleat all times

• User-defined sample overtemperature protectionassures sample integrity

• Imbalance tolerant gyro permits eyebalancing of tube contents and rotor load

RC-5C PLUS - easy controlwith all the options you need

Automatic RCF allows calculation and displayof g-force for any rotor and speed combination.

Built-in ω2dt integrator for run-to-runreproducibility calculates the total centrifugal effect,compensating for variations in speed and time.

Automatic rate control improves separations bycontrolling acceleration and deceleration duringreorientation phases to preserve density gradientresolution and minimize soft pellet suspension.

Accurate speed control from 50 to 21,000 rpm.

RC-5B PLUS – simplicity of operationwith proven, practical performance

Easy to use controls for programming runconditions.

High visibility analog displays and lampindicators.

Run conditions can be set in any sequence andchanged at any time.

Accurate speed control from 500 to 21,000 rpm.

Large digital LEDdisplays show

time, temperatureand rotor speed

or g-force

Speed indicator givescontinuous, direct

readout of rotor speed

Temperature control selector and indicator sets andindicates rotor chamber temperature from -20 to +40°Cin 1°C increments; adjustable overtemperature setting

Speed control selector sets continuouslyadjustable rotor speeds to 21,000 rpm

Imbalance light illuminateswhen rotor is imbalanced

Time control selector setsrun time from 0-120 mins

or HOLD for runs ofindefinite duration

Brake switchactivates dynamicbraking of rotor

during deceleration

Chamber doorcan be opened

when door light isilluminated

Brusheslight flashes toindicate wornmotor brushes

Easy-to-use levers set runconditions and display set

time, temperature and speed

Levers select numeric rotor code forautomatic temperature compensation,speed control and g-force calculation

• RPM/RCF switch activatesg-force calculation

• OFF/ARC switch activates slowstart/stop for density gradient runs

• OFF/ω2dt switch activatesaccumulation of ω2dt forrun-to-run reproducibility

• TIMED/HOLD switch setsTimed Mode to show elapsedtime or accumulation of ω2dt;sets Hold Mode to showaccumulation of time

• OFF/BRAKE switch activatesdynamic rotor braking duringdeceleration

Time/ω2dt display shows eitheraccumulated run time, remaining runtime or elapsed ω2dt value. evers either

set run time to 99 hours 59 mins orω2dt value up to 9.9 x 1016

Display of 12 differentcoded system

malfunction conditionsDisplay of 9 different

operational status conditions


12 13

SUPER

flexibility

The versatile SUPER T 21 offers thecapabilities of three different centrifugesin a single benchtop system.

Designed to meet virtually all of your separationneeds, this super-compact, super-quiet instrument isthe perfect personal centrifuge for research andclinical applications, functioning as:

• A benchtop superspeed with floor model capacity• A refrigerated microcentrifuge• A high capacity general purpose benchtop centrifuge

SORVALL®

SUPER T 21 benchtopSuperspeed® centrifuge.

SUPER T 21 benchtop Superspeed

• Superspeed performance to 21,000 rpm (49,555 x g)• Compact 35” x 25” (890 mm x 640 mm) footprint• Large 3-liter capacity for high volume processing • Standard and deepwell microplate processing• Microprocessor control and digital LED displays• Maintenance-free, brushless DC direct drive system• Whisper-quiet operation at 62 dB (A)• Wide range of high-performance and ColorTone® rotors

QUIKset™ menus save timefor commonly used protocols.

Store up to 10 run programs.

SOFTspin® rotor control preventsgradient disturbance or mixing.

Simultaneous displayof SET and RUN conditions.

Auto Preset Overtemperature protectstemperature-sensitive samples.

Automatic diagnostic testing with every power-up.

High-performance rotors for the SUPER T 21allow you to spin a wide variety of tubes and bottles(from 1 ml to 750 ml) as well as microplates.

Tubes, bottles and adapters are available for thebroadest range of applications, from low to highspeed. This gives you unmatched versatility intube, bottle and adapter selection.

A user-friendly control panel with a soft-touch keypad makes fast entryof run conditions easy, and provides access to all the functionalityyou’ll need from a high-performance benchtop Superspeed.

ST-H50 swinging-bucket rotor • 4 x 50 ml windshielded rotor

for high RCF pelleting and densitygradient separations

• Sealed, autoclavable titanium bucketsprovide enhanced biohazard protection

ST-MICRO fixed-angle rotor• 24-place microtube rotor for pelleting plasmid

DNA, cell lysates and other cell concentrates• ColorTone options for easy identification• Independently assessed and certified

for biocontainment• Fully autoclavable

SLC-250T SUPER-LITE®

composite fixed-angle rotor• 1.5 liter capacity for high speed,

high volume processing• Easier handling, lifting and carrying• Resistant to chemical corrosion• System integrated for optimal performance

SL-250T and SL-50T SUPER-LITE®

aluminum fixed-angle rotors• 4 x 250 ml and 8 x 50 ml capacities for high RCF processing• Lightweight aluminum design• ColorTone® options for easy, at-a-glance identification• Independently assessed and certified for biocontainment• Fully autoclavable

• To order a ColorTone rotor, select desired color from colorchart and add corresponding number to end of rotor catalog number.

SUPER T 21 Rotor Selection GuideCapacity Max. Speed Max. RCF Tube Size Configuration Catalog

Rotor (place x ml) (rpm) (x g) (range, ml) Options Number

SLC-250T 6 x 250 11,500 20,240 3-250 76902SL-250T 4 x 250 14,500 27,640 3-250 • 76821SL-50T 8 x 50 18,500 40,910 1-50 • 76872ST-MICRO 24 x 1.5 21,000 49,560 0.25-1.5 • 76899ST-H750 4 x 750 4,300 3,830 1.5-750 rotor with buckets 76845

n/a n/a n/a n/a rotor body 768443 standard microplates 4,300 3,100 n/a microplate carrier 11779

ST-H50 4 x 50 11,000 19,770 1-50 76841

1 4 5 62 3Blue Red Green Purple Gold Silver

FIX

ED

-AN

GL

ER

OT

OR

S

SWIN

GIN

GB

UC

KE

TR

OT

OR

S

Rotors for

superior all-round

performance

ST-H750 swinging-bucket rotor • 3 liter capacity for large volume processing• Accommodates 12 standard or 4 deepwell microplates• Wide range of adapters for all commonly

used tubes and bottles• Sealing covers provide enhanced biohazard protection


14 15

SUPER

rotor choices

ColorTone® rotors are a colorful way to enhancelaboratory safety and improve rotor inventorymanagement. Six different rotor colors for easy,at-a-glance identification allow you to color-designate in a variety of ways:

• Assign different color rotors to differentlaboratories, different centrifuges, evendifferent users

• Color-designate according to rotor application toenhance safety and prevent cross-contamination

SLC-6000SLC-4000

SLC-3000

SLA-1500

SLA-3000

Fixed-angle rotors

Select from conventional aluminum,SUPER-LITE® aluminum, SUPER-LITEcomposite, RX™ Rapid Access, ColorTone®,and titanium fixed-angle rotors to fulfill allyour general pelleting needs.

Super capacity

Seven fixed-angle rotors with capacities from1 – 6 L are available for fast, efficient, largevolume cell pelleting. Multi-liter volumesof cultures grown in shake flasks, or large volumecultures grown in 20 – 30 L fermentors can beefficiently harvested.

Made specifically for the Evolution® RC,the 6-liter SLC-6000 composite rotor offersunsurpassed sample capacity and processing time atspeeds up to 8,500 rpm and RCFs to 15,810 x g.

The SUPER-LITE advantage

The SUPER-LITE series of rotors weigh from 30%to 50% less than previous generation metal rotors.

SUPER-LITE aluminium rotors offer higher topspeeds, fast acceleration and deceleration times andsuperior separation performance – the perfectchoice for laboratories that demand shorter runtimes with maximum throughput.

SUPER-LITE composite rotors weigh evenless than their aluminum counterparts for betterergonomics. The use of exclusively compositematerials provides greater corrosion resistanceand longer rotor life.

Many SORVALL fixed-angle rotors offerprotection against biohazards. Their uniquebiocontainment design, independently assessed andcertified by the Centre for Applied Microbiologyand Research at Porton Down, UK, ensures safecontainment of aerosols and biohazard spills.

SUPER performance

High performance, high ‘g’ fixed-angle rotors areoptimized for small volume processing.Applications include cell and tissue homogenateclarification, subcellular fractionation, enzymology,nucleic acid and protein precipitation, and virusconcentration.

SA-512

SA-600

SA-34SA-800

SE-12

The SLA-600TC tissueculture rotor optimizes50 and 15 ml conical tubeprocessing for higher g-forceapplications, andaccommodates a varietyof centrifugal filtrationdevices and proteinpurification spin columns.

Rotors for SORVALL® floor modelSuperspeeds comprise the broadest,most diverse collection in the industry.

NEW RX™ Rapid Access rotors are a labor-saving innovation for high throughput research.Their unique design replaces the conventional, dualknob fixed-angle rotor cover with an easy-to-use,single knob/push-button rotor lid assembly that canbe attached or removed in seconds while the rotorbody is in the centrifuge chamber.

Benefit from:• Faster access to samples with fewer

handling steps

• Enhanced safety, by keepingrotor secured to centrifuge between runs

• Safe operation without rotor lidfor special applications


SH-MT 60-place microtube rotor.

16 17

Select from four swinging bucket rotors withcapacities from 80 – 3,000 ml for gentlesedimentation of different cell types.

SH-3000 swingingbucket rotor withmicroplate carriersand microplates.

Cross section of continuous flow rotors.

SUPER

rotor choices

SH-3000

HS-4

HB-6

Swinging bucket rotors

The 3-liter SH-3000 rotor provides versatilityfor typical biochemical and molecular biologyapplications, and accommodates all commonlyused centrifugal filtration and purification devices.Microplate carriers enable processing of microwellplates, PCR plates and PCR tube strips.

HB-6, HS-4 and SH-80 rotors offer highg-forces for applications including density gradientseparations, subcellular fractionation and virusconcentration.

A wide range of tubes, bottles and adaptersfor swinging bucket rotors maximizesapplications versatility.

Special purpose rotors

Vertical rotors

Short path lengths in SV-288 and SV-80vertical rotors translate into time-saving rateand isopycnic density gradient separations ofviruses and subcellular organelles.

Continuous flow systems

TZ-28/GK and SS-34/KSB-R continuous flowrotors are designed for multi-liter cell cultureharvesting or the collection of cell-free growthmedia containing excreted products such asproteins, hormones and vitamins.

• 800 ml sedimentation capacity with TZ-28/GK

• 280 ml sedimentation capacity with SS-34/KSB-R

• Maximum flow rate of 600 ml/min

Zonal rotor

The TZ-28 zonal rotor enables separation byrate zonal or isopycnic banding techniques in largevolumes. The rotor can be loaded dynamicallyor statically, and unloaded at rest without theneed for displacement fluids.

Microtube rotor

The SH-MT microtube rotor is designed to spinlarge numbers of 0.25 – 1.5 ml microtubes forapplications including DNA mini preps andprecipitation and concentration of nucleic acidsin PCR strips.

SS-34/KSB-R (left) and TZ-28/GK continuous flow rotor systems.

PCR plate adapter.

SV-288 and SV-80 vertical rotors.


18 19

Floor Model Superspeed Rotor Selection Guide

* Standard (Std) configuration rotors independently testedand certified for biocontainment by CAMR, Porton Down, UK.

RX = Rapid Access rotor option (not certified for biocontainment).1 Speed/RCF limited by polypropylene (PP) bottle.2 In Evolution RC with loaded rotor (SH-MT in RC-5C PLUS).3 Maximum rotor capacity.4 Precipitate capacity.

• To order a ColorTone® rotor, select desired color from color chart and addcorresponding number to end of rotor catalog number.

FIX

ED

-AN

GL

E R

OT

OR

SSW

ING

ING

BU

CK

ET

RO

TO

RS

SPE

CIA

LP

UR

PO

SE R

OT

OR

S

1 4 5 62 3Blue Red Green Purple Gold Silver

RC-5 Series

Capacity Max. Speed Max. RCF Max. Speed Max. RCF Accel/Decel2 Tube Size Configuration CatalogRotor (place x ml) (rpm) (x g) (rpm) (x g) (min:sec) (range, ml) Options Number

SLC-6000 6 x 1,000 8,500 15,810 n/a n/a 4:45/3:15 50 – 1,000 w/PC bottles 76640

7,2001 11,3401 n/a n/a w/PP bottles 76650

SLC-4000 4 x 1,000 9,000 15,180 7,000 9,180 2:15/2:15 50 – 1,000 w/PC bottles 76980

8,0001 12,0001 n/a n/a w/PP bottles 76990

SLA-3000* 6 x 500 12,000 24,340 11,000 20,450 3:00/2:00 3 – 500 Std • 07149

RX™ • 46620

SLC-3000 6 x 500 10,000 17,600 10,000 17,600 2:15/1:45 3 – 500 78510

SLA-1500* 6 x 250 15,000 34,160 14,500 31,920 2:00/1:30 3 – 250 Std • 08142

RX • 46615

F-16/250* 6 x 250 14,500 31,940 n/a n/a 2:30/1:45 3 – 250 11966

SLC-1500 6 x 250 14,000 29,990 14,000 29,990 1:30/1:15 12 – 250 78500

SLA-1000* 4 x 250 16,500 35,790 16,500 35,790 1:15/1:00 3 – 250 • 74200

SA-800 8 x 100 20,500 49,050 19,500 44,390 1:00/1:00 1.5 – 100 76940

SLA-600TC* 12 x 50 13,000 27,750 12,500 25,660 2:00/1:30 1 – 50 Std • 74220

RX • 46625

SA-600* 12 x 50 17,000 41,840 16,500 39,410 2:00/1:30 1 – 50 Std • 28500

RX • 46610

F28/50* 10 x 50 20,000 51,250 19,500 48,720 1:30/1:15 1 – 50 11885

SS-34* 8 x 50 20,500 50,230 20,000 47,810 1:15/1:00 1 – 50 Std • 28020

RX • 46600

SA-300* 6 x 50 25,000 67,510 20,500 45,390 1:15/0:45 1 – 50 • 18100

F28/36* 12 x 36 18,000 41,370 18,000 41,370 1:30/1:15 0.4 – 36 11940

SA-512 32 x 16 19,500 48,930 18,500 44,040 1:15/1:00 1.5 – 16 76940

SM-24* 24 x 16 20,500 51,970 20,000 49,460 1:30/1:00 1.5 – 16 Std • 29017

RX • 46605

SE-12* 12 x 14 26,000 70,450 21,000 45,960 1:00/0:30 1 – 14 • 27004

F-28/13* 16 x 13.5 19,500 48,550 19,500 48,550 1:15/1:00 0.4 – 13.5 11942

F-20/MICRO* 32 x 1.5 20,000 51,430 20,000 51,430 0:45/0:45 0.25 – 1.5 • 27038

SH-3000 4 x 750 4,700 4,580 4,350 3,920 1:00/1:00 3 – 750 rotor w/buckets 117963 standard 4,700 3,710 4,350 3,175 n/a microplate carrier 11779microplates

HS-4 4 x 250 7,500 11,070 7,000 9,640 1:45/1:30 1 – 250 38018

HB-6* 6 x 50 13,000 27,620 13,000 27,620 0:45/0:45 1 – 50 11860

SH-80 8 x 10 20,000 45,400 20,000 45,400 0:30/0:30 10 08296

SH-MT 60 x 1.8 n/a n/a 20,000 19,150 0:30/0:30 0.25 – 1.8 11600

SV-288 8 x 36 20,000 40,300 20,000 40,300 1:30/1:00 36 09201

SV-80 16 x 5 19,000 40,970 19,000 40,970 1:15/0:45 5 09200

TZ-28 bowl 20,000 42,580 20,000 42,580 n/a 1,350 ml3 52358

TZ-28/GK bowl 19,000 38,430 19,000 38,430 n/a 800 ml4 52358& 49633& 49089

SS-34/KSB-R 8 x 50 20,000 47,810 20,000 47,810 n/a 280 ml4 28020& 14005

Evolution® RC SORVALL® Evolution® RC Basic and Advanced Superspeed centrifugesMaximum speed rpm 26,000 Maximum RCF x g 70,450Maximum capacity 6 x 1,000 mlDrive Direct Brushless DC Motor with DuraFlex™ gyro suspensionAccel/decel rates 3 acceleration, 4 decelerationSpeed range rpm 100 – 26,000Speed control accuracy ±0.2% or 20 rpm, whichever is greaterTemperature set range °C -20 to +40Temperature control °C +2 to +40 Temperature accuracy °C ±2Ambient temperature range °C 10 – 38Dimensions (H x D x W) inches (mm) 51.0 x 28.0 x 42.0 (1295 x 710 x 1055)

33 (850) height to top of deck44 (1125) depth with door open

Weight lb (kg) 860 (390)

SORVALL RC-5C PLUS Superspeed centrifugeMaximum speed rpm 21,000 Maximum RCF x g 51,430Maximum capacity 4 x 1,000 mlDrive Brushless DC Motor with gyro suspensionAccel/decel rates 2 acceleration, 3 decelerationSpeed range rpm 50 – 21,000Speed control accuracy ±1% or 100 rpm, whichever is greaterTemperature set range °C -20 to +40Temperature control °C +2 to +40 at maximum rotor speedTemperature accuracy °C ±2Ambient temperature range °C 15 – 38Dimensions (H x D x W) inches (mm) 45.0 (to top of control panel) x 30.0 x 39.0 (1140 x 760 x 990)

36.0 (914) to top of deckWeight lb (kg) 680 (308)

SORVALL RC-5B PLUS Superspeed centrifugeMaximum speed rpm 21,000 Maximum RCF x g 51,430Maximum capacity 4 x 1,000 mlDrive High torque, DC direct drive with gyro suspensionAccel/decel rates 1 acceleration, 2 decelerationSpeed range rpm 500 – 21,000Speed control accuracy ±1% or 100 rpm, whichever is greaterTemperature set range °C -20 to +40Temperature control °C +2 to +37 at maximum rotor speedTemperature accuracy °C ±2Ambient temperature range °C 15 – 38Dimensions (H x D x W) inches (mm) 45.0 (to top of control panel) x 30.0 x 39.0 (1140 x 760 x 990)


SORVALL SUPER T 21 benchtop Superspeed centrifugeMaximum speed rpm 21,000 Maximum RCF x g 49,555Maximum capacity 4 x 750 mlDrive High torque, brushless DC direct driveAccel/decel rates 2 acceleration, 3 decelerationSpeed range rpm 500 – 21,000Speed control accuracy ±1%Temperature set range °C -10 to +40Temperature control °C +4 to +40 at maximum rotor speedTemperature accuracy °C ±2Ambient temperature range °C 15 – 38Dimensions (H x D x W) inches (mm) 21.5 (to top of control panel) x 25.0 x 35.0 (550 x 640 x 890)


Instrument Specifications


performance right across the range - Sep Sci...performance right across the range ... Simply nudge...

Documents

Transcript of performance right across the range - Sep Sci...performance right across the range ... Simply nudge...