PERFORMANCE CHARACTERISTICS...B – Ah rating is measured @ 20°C with end voltage per cell (EVPC) =...
Transcript of PERFORMANCE CHARACTERISTICS...B – Ah rating is measured @ 20°C with end voltage per cell (EVPC) =...
OVERVIEW
Voltage 6V, 12V
Ah Rating For 6V: 180Ah to 230Ah C20. For 12V: 28Ah to 300Ah C20. Ah rating is @25°C, with end voltage per cell (EVPC) = 1.75V.
Technology Valve Regulated Lead Acid (VRLA) with high-compression Absorbed Glass Mat (AGM) as separator
+ve Plate Flat pasted grid, made of Pb-Ca-Tin alloy, optimized for high corrosion resistance
-ve Plate Flat pasted grid, made of Pb-Ca-Tin alloy, optimized for high corrosion resistance
Electrolyte Dilute sulfuric acid (Specific gravity = 1.300)
Separator Highly porous glass micro-fibre separator, optimized for low internal resistance, for maximum absorption of the electrolyte, and for electrical separation
Container Standard: Reinforced ABS (UL94HB) container and cover Optional: Flame-retardant reinforced ABS container and cover compliant with U.L.94 V-0 with an oxygen limiting index of more than 28%
SALIENT FEATURES
Best possible compromise in lead acid plate technology with its lead selenium blocks which have
extremely high corrosion resistance and virtually eliminate inter-granular corrosion, the most common
cause of cell failure
Very high operational reliability in rough conditions
Low maintenance due to reduced antimony in the alloy and high electrolyte reserve
Thick positive plate design which gives a 15-year design life (with 80% C20 capacity remaining) @ 20°C
Low gassing due to PbSbSnSe alloy
BATTERY LIFE
Depth of Discharge Number of Cycles
100% 1,200
80% 1,500
50% 3,300
40% 4,000
30% 5,000
20% 5,500
The Standard VRLA AGM batteries fare reasonably well in deep discharge conditions, and fare much better for lower depths of discharge.
PRODUCT SPECIFICATIONS
ModelA Ah RatingB SCCC IRD TTE DimensionsF (mm/inch) Weight C5 C10 C20 C48 C100 Length Width Height Kg (lb)
TER-6180 150.0 174.0 180.0 220.0 232.0 2070 2.8 F-M8 260 (10.23) 182 (7.16) 310 (11.81) 34 (74.8)
TER-6200 167.0 193.0 200.0 244.0 258.0 2300 2.6 F-M8 245 (9.64) 190 (7.48) 286 (11.25) 35 (77.0)
TER-6210 175.5 203.0 210.0 257.0 270.0 2415 2.5 F-M8 260 (10.23) 182 (7.16) 310 (11.81) 36 (79.2)
TER-6230 192.0 222.0 230.0 281.0 296.0 2645 2.3 F-M8 260 (10.23) 182 (7.16) 310 (11.81) 38 (83.6)
TER-1228 23.2 27.0 28.0 35.2 37.9 370 15.1 F-M6 238 (9.37) 130 (5.11) 228 (8.97) 17 (37.4)
TER-1235 29.0 33.8 35.0 44.0 47.4 462 14.6 F-M6 238 (9.37) 130 (5.11) 228 (8.97) 18 (39.6)
TER-1255 45.6 53.1 55.0 69.1 74.5 726 12.8 F-M6 305 (12.01) 175 (6.88) 224 (8.81) 21 (46.2)
TER-1275 62.0 72.4 75.0 94.2 102.0 990 11.6 F-M6 352 (13.85) 175 (6.88) 213 (8.38) 25 (55.0)
TER-12100 83.0 96.5 100.0 126.0 135.0 1320 9.2 F-M6 362 (14.25) 170 (6.69) 262 (10.31) 31 (68.2)
TER-12120 99.5 116.0 120.0 151.0 162.0 1584 7.7 F-M8 362 (14.25) 170 (6.69) 262 (10.31) 33 (72.6)
TER-12150 124.5 145.0 150.0 188.0 203.0 1980 6.8 F-M8 362 (14.25) 170 (6.69) 273 (10.74) 45 (99.0)
TER-12200 166.0 193.0 200.0 251.0 265.0 2500 6.4 F-M8 500 (19.68) 180 (7.08) 300 (11.81) 66 (145.2)
TER-12250 207.5 241.0 250.0 305.0 322.0 3167 3.8 F-M8 530 (20.86) 282 (11.10) 260 (10.23) 78 (171.6)
TER-12300 249.0 290.0 300.0 366.0 386.0 3800 3.2 F-M8 530 (20.86) 282 (11.10) 285 (11.22) 90 (198.0)
A – The terminal voltage for “TER-6” models is 6V, while that for “TER-12” models is 12V.
B – Ah rating is measured @ 20°C with end voltage per cell (EVPC) = 1.70V, except for C48 and C100 for which end voltage per cell (EVPC) = 1.85V. The
actual battery performance may be ±5% of the figures shown above.
C – SCC means Short Circuit Current and its unit is Amperes.
D – IR means Internal Resistance and its unit is milli-ohms.
E – TT means Terminal Type.
F – Actual dimensions may vary by ±1%.
PERFORMANCE CHARACTERISTICS
Charging Voltage vs Ambient Temperature
Charging Time vs Depth of Discharge
Available Capacity vs Ambient Temperature
Capacity vs Storage Time
Characteristic Curves at Different Discharge Rates
Charging Characteristic Curves
Service Life vs Ambient Temperature
OPERATIONAL DATA
Temperature Range
Applicable Temperature Range Ideal Temperature Range
-40°C to +60°C +20°C to +25°C
Float Voltage
Float Voltage Range : 2.25 to 2.30 VPC @ 25°C
Recommended Float Voltage
: 2.27 VPC @ 25°C
Equalize Voltage : 2.35 VPC for 12 hours
Charging Instructions
Constant voltage charging is recommended.
Temperature compensation to be applied for temperatures ranging from 0°C to 40°C is as follows: subtract 3mV / °C / cell above 25°C (add 3mV / °C / cell below 25°C).
CERTIFICATIONS
NEBL Compliant
AVAILABILITY
If you would like to buy our Tubular Eco Flooded batteries, please contact us and we will make them available
to you within 6 weeks, no matter how big your order. And more often than not, we will be able to do it sooner
than that.
WARRANTY
Our Tubular Eco Flooded batteries come with a 36 months warranty. We firmly believe in the quality of our
products. However, in the event that there are any problems with our batteries during the warranty period,
we will replace them. No questions asked! Customer satisfaction was, is, and will always be the most
important thing for us.
Note: WARRANTY VOID IF OPENED OR IMPROPERLY CHARGED. Therefore, never open the battery, and use our battery charger or
follow the charging instructions properly.