Penstocks & HydroWare® - cms.esi.info · Penstocks & HydroWare® A range of ancillary products for...
Transcript of Penstocks & HydroWare® - cms.esi.info · Penstocks & HydroWare® A range of ancillary products for...
HydroWare A RANGE OF CONTROL VALVES
AND CONTROL GATES THAT CAN
BE USED FOR SEVERAL TYPES
OF APPLICATION IN THE WATER
NETWORK BOTH WASTEWATER
AND CLEAN WATER. CAN BE
USED AS STAND ALONE OR IN
CONJUNCTION WITH OTHER
ELIQUO HYDROK PRODUCTS
SUCH AS A HYDROSLIDE.
Penstocks ELIQUO HYDROK PENSTOCKS
ARE A TAILOR MADE SOLUTION
TO CONTROL AND ISOLATE
FLOW. EACH UNIT IS CUSTOM
MADE FROM HIGH GRADE
STAINLESS STEEL AND CAN BE
CONSTRUCTED IN ANY SIZE
TO SUIT SPECIFIC SCHEME
REQUIREMENTS WHICH CAN
HELP REDUCE ON SITE TIME AND
COST WHEN RETROFITTING INTO
EXISTING CHAMBERS ETC.
ELIQUO HYDROK, sole UK distributor for
Available in two types.
Type A, is mounted on a 90º bend outlet pipe, and is available
in sizes 100 mm to 400 mm diameter. Robust construction of
Stainless Steel with brass bearings.
Type B, is mounted on a straight flanged pipe section and is
available in sizes 100 mm to 300 mm diameter. Can retain
water up to 4 m head.
FLOAT CONTROLLED FLAP VALVES
The Hydrolimiter is a float controlled slide gate. As the level
of flow rises the control gate closes, limiting the downstream
flow. Similar to the VN and VS HYDROSLIDE®, but without the
control cam that gives the HYDROSLIDE® its accuracy of con-
trol. Available in sizes 100 mm to 400 mm. Robust construc-
tion of Stainless Steel with brass bearings.
HYDROLIMITER
Can be used to prevent water backflow in harbours, and
river outlets. Control flows from storage tanks in unison with
Hydroslides. The float controlled flap valve can be used to
reduce the head acting upon the flow control, thus allowing a
large control orifice size.
Can be used to control discharge or water level. Cost effective
alternative, where accuracy of flow rate plays a sub-ordinate
role. Can be used to utilise storage in a cascade formation
within an existing sewer system, as an alternative to providing
a specific storage tank.
APPLICATION
APPLICATION
FLAP VALVES
Available in circular size from 100mm to 1200 mm. Rectangu-
lar Flaps – can be constructed to client requirements.
Robust construction of Stainless Steel with brass bearings
Easy wall fixing, can be provided with PN 10 flange as option,
for pipe mounting
For use within sewers, storage tanks manhole
chambers, flush chambers, river outlets.
APPLICATION
PENSTOCKS
Available in sizes from 150 mm to 1600 mm
Robust construction of stainless steel with brass bearings
Easy wall fixing
Pressure sealing – both directions
Every ELIQUO HYDROK penstock can be supplied with stand-
ard reverse ACME thread and with a standard valve key fitting.
Can be supplied for fully open / fully closed isolation uses, or
with an orifice for flow control. Depending on application, they
can be supplied for either wet side or dry side installation.
Can also be supplied with an ActuSlide for an actuator drive
system that eliminates the need for operation and mainte-
nance teams to enter hazardous undeground areas.
Can be used to limit discharges from detention systems
Provide emergency by-pass facility
Suitable for sewerage systems
Suitable for surface water systems
Suitable for the control of watercourses
Can provide a level of flow control
Provides high degree of Isolation
Manufactured from high grade stainless steel
Bespoke manufacture to suit each application
APPLICATION
ADVANTAGES AND BENEFITS
MEMBER OF ELIQUO WATER GROUP
Additional products to offer water and wastewater
management solutions.
ELIQUO HYDROK LTDIndian Queens Ind Estate, St. Columb I Cornwall, England I TR9 6TL
T +44 1726 861 900 [email protected] I www.eliquohydrok.co.uk
Version 001