Peltor Aviation - superyachtspares.com · Effective noise-attenuating headset with ambient-noise...

Peltor ABBox 2341, SE–331 02 Värnamo, Sweden

Tel +46 (0)370-65 65 65, Fax +46 (0)370-65 65 69e-mail: [email protected]

A V I A T I O N

Peltor AviationAbsolute world-classSafety and Comfort

Small – yet spaciousThe cups are light and comfortable. Despite theirsmall outer dimensions, they provide amplespace for the ears. This means both effectiveattenuation and good comfort.

Two-point fastenersIndividually sprung bands of special steel prov-ide an even distribution of pressure and stabil-ity despite the low contact pressure.

Pressure balancingAn ingenious channel system ensures effectivebalancing of pressure. Provides both comfortand excellent attenuation.

Broad, soft sealing ringsPeltor’s unique foam-and-fluid filled ringsdistribute pressure evenly and give a low sur-face pressure. A must when the wearer alsowears spectacles..

Peltor Aviation HeadsetsNoise-compensated microphoneHigh-quality speech reproduction even atambient noise levels of over 115 dB.

Quick PositioningShift between speech and stand-by withoutchanging your individual basic settings.

Foldable headbandAdjusts to the shape of any head. A broad, softhead cushion gives comfort and stability.Continuous height settings.

Frequency-compensatedsound reproductionPeltor earphones have a special frequency fil-ter that considers the attenuation characteris-tics of the cup. This provides the best possiblesound quality in noisy environments.

Safety connectionThe cord and contact are specially designed forthe best function and reliability. The contacts areencased and reinforced at stress points..

Peltor is registered trademark of Aearo Company. © Aearo Company 2000.

P008

075

DB1

8006

-GB

Aearo LtdFirst Avenue, Poynton, Cheshire

England, SK12 1FJTel. +44 (01625) 878320, Fax. +44 (01625) 877348

SUPERYACHT SPARES

www.superyachtspares.com / [email protected] / +31 183 639193

Aviation – accessoriesPeltor constantly develops new accessories, particularly in the hygiene area, to make our headsetsas efficient and comfortable as possible for long periods of use.Accessories, spare parts and additional equipment are all developed and manufactured by thesame creative people who designed our headsets. This guarantees adaptability and safe function.

A V I A T I O NA V I A T I O N

A headset for high demandsWhen the ground is 32,000 feet below you, you can’tafford to have anything go wrong.Perfect communication, convenient design, low weightand maximum comfort are essential requirements ofa headset in a noisy aviation environment, in the airand on the ground.

A challengePeltor has the knowledge, experience and enthusiasmto meet this challenge, having been developingheadsets for military, civil, sport and helicopteraviation since the early 1950’s. In fact we are leadersin many aspects of product development.

Safety firstOur headsets have no protruding features which cansnag. All contacts are encased and reinforced at ben-ding points. The low profile of the headband ensuresthat the headset sits firmly on the head and minimizesthe risk of bumping against obstacles.

The parallel connector means that each earphoneworks separately, so that if one fails, the other worksas usual.

Our new microphone arm features a securelyencased cord. The small, sturdy design with fourpositions gives even more effective communicationwith its increased flexibility.

These small, carefully designed and extensively testedfeatures are just some of the reasons why Peltorheadsets are so safe. We’ve known this for more than40 years!

Hygiene kitReplace sealing rings and attenuation cushionsquickly and easily. The set contains two sealingrings and two attenuating cushions.To ensure good function and hygiene, replacetwice a year.

Wind protectionAn effective wind muffler for microphones.One per package.

Clean single-use protectorsPackages of 100 pairs, which are easy to applyto the sealing rings.

Mike ProtectorAn effective single-use microphone protectorthat increases the microphone’s life span. About50 replacements/pkg.

Storage bagEffectively protects the headset during transportand storage.

Cable clampStress-relieving clamp that can be attached to alapel or pocket to keep the cord out of the way.

Accessories, spare parts and additionalequipment for Peltor Aviation headsets.

8003 8006 8103 8106 Ground MechanicMT52H79F-04 VI MT51H79F-01 VI MT52H79F-03 MT51H79F-02 MT72H7F-01

Hygiene kit HY79 HY79 HY79 HY79 HY73

Wind protection M40/1 M995 M40/1 M995 M40/1

Clean single-useprotectors HY100A HY100A HY100A HY100A HY100A

Mike Protector HYM1000 HYM1000 HYM1000 HYM1000 HYM1000

Storage bag FP0901 FP0901 FP0901 FP0901 FP0901

Cable clamp TKFL01 TKFL01 TKFL01 TKFL01 TKFL01

HY79

HYM1000 TKLF01M995M40/1

Peltor Aviation – total safety and

HY100A

SUPERYACHT SPARES


HTS earphone

HTS earphoneImpedance:......................................................230Ωparallel connected to 115Ω

Output level at 0,5V / 1kHz:...............................81dBa

MT52 microphone

MT52 microphoneType:..................................................DynamicFrequency range:..........................70-9000Hz ±6dBSensitivity as lip mike:...........................4mV / 220ΩImpedance:....................................................230ΩNoise suppression:.............................12dB at 1kHz

Ground Mechanic MT72H7F-01

Effective noise-attenuating headset with ambient-noise compensated dynamic differential micro-phone and built-in microphone amplifier for reliable communication between ground crew andcockpit. The frequency range of the earphones gives good sound reproduction. The microphone ismounted on the left and has Peltor’s Quick Positioning, which allows quick and easy switchingfrom stand-by to active mode. The headset has a broad, comfortable headband, collapsible for theeasiest and safest transport and storage. Spiral polyurethane cable with Peltor’s standard J11moulded connector. Connects to the aircraft via an adapter with PTT button.


comfort must go hand in hand

Attenuation data for Peltor Ground Mechanic HeadsetThe Peltor Ground Mechanic Headset is tested and approved according to PPEdirective 89/686/EEC and applicable parts of the EN352–1:1993 European norm.Certificates issued by FIOH, Laajaniityntie 1, FIN–01620, Vantaaa, ID no. 0403.

AdapterFL9ESturdy box with easy-to-use PTT button andclamp for easy, effective attachment. Extremelyoil and cold resistant polyurethane extensioncord of 3–6 m. Spiral in the part that hangs fromthe aircraft body and straight in the part thatlies on the ground.Weight:………………………….........…….. 285gConnectors:………………...................….. PJ-051

SNR

31 dB

20

30

40

50

60

70

80

90

100

125 250 500 1000 2000 4000 8000 Hz

dB

20

30

40

50

60

70

80

90

100

32 63 125 250 500 1000 2000 4000 8000 16000 Hz0

0

110dB

The new Aviation 8000 seriesOur highly praised 7000 series headset now has awhole group of worthy successors.

The Aviation 8000 series has a more compactdesign. No protruding features that can snag onobstacles and affect safety and the cord is securelyencased in the microphone arm.

Remarkable comfortThe broad foam-and-fluid filled, breathing sealingrings seal effectively, but with minimal pressuredistributed over the entire contact surface. Thestainless sprung steel headbands maintain theirresiliency and provide an unbeatable distribution ofpressure. Plenty of space for the ears and a very lowweight!

Individual volume controlThe Aviation 8000 series has easily accessible controlswith inset volume and balance controls in one. Thissolution lets you compensate for different noisesituations and individual variations, such as poorhearing in one ear.

Positive communicationEffective noise attenuation through the entire speechfrequency area up to 25 dB. A special filter eliminateswind and breath noises.

• Small, lightweight and sturdy.• Microphone arm twists 180 degrees, allowing both right- and left-mounting.• 4-way adjustment with resistance settings – practically unlimited possibilities for individual settings.• Quick Positioning – from speech to stand-by without changing the basic settings.

New microphoneMT51, MT52

FM23 amplifierFrequency range:............................................................63-1600Hz -6dBAmplification:..............................200mV/200Ω at an input signal of 4mV/1kHzSupply voltage:............................................................................15-27VPower consumption:...................................................................18mA at 27V

Weight:......................................................330gConnectors:........................................U-174/U

FL9E-03Like the FL9E above, but the entire extensioncord is spiral. Length 1.5–6.5 m.Weight:………………………….......…….. 430gConnectors:……...............…………….. PJ-051

SNR

34 dB

H31 dB

M22 dB 32 dB

L16.9 26.1 33.3 37.9 35.5 33.5 36.6

3.6 2.4 2.8 2.0 2.3 2.2 2.4

13.3 23.7 30.5 35.9 33.2 31.3 34.2

Frequency 2

Mean att. 3

Stand. dev. 4Peltor AviationHeadset

APV

Model 125 250 500 1000 2000 4000 8000 Attenuation data for the Peltor Aviation Headset 8006, 8103, 8106The Peltor Aviation headset is tested and approved according to PPE directive89/686/EEC and applicable parts of the European EN352-1:1993 standard.Certificate issued by FIOH, Laajaniityntie 1, FIN-01620, Vantaa, ID no. 0403.

SUPERYACHT SPARES



Aviation 8006 MT51H79F-01 VI

The Aviation 8006 headset has an ambient-noise compensated electret differential microphone,specially designed for aviation intercom systems. The frequency range is adjusted for good speechrecognition. The earphones have a broad frequency range for good sound reproduction. Straightpolyurethane cord, moulded connectors and a stereo/mono switch in the branching box. The ear-phones are connected with a 1/4" stereo connector and the microphone has a PJ068 connector.

HTR-330 earphone

HTR-330 earphoneImpedance:.................................................330Ωparallel connected to 165Ω for systems up to 600Ω

Output level at 0,5V / 1kHz:............................81,5dBaVolume control:.....................................Approx. 23dB

MT51 microphone

MT51 microphoneType:.........................Electret differential microphoneFrequency range:...............100-10000Hz±6dBSensitivity as lip mike:.......................380mV / 220ΩNoise suppression:............................28dB at 1kHzImpedance:................................................Low

Aviation 8106 MT51H79F-02

The Aviation 8106 helicopter headset has an ambient-noise compensated electret differential mi-crophone. The earphones have a more limited frequency range, to give the best possible speechrecognition in the ambient noise of a helicopter. Spiral polyurethane cable with moulded NATO-standard connector.

MT51 microphone

MT51 microphoneType:.........................Electret differential microphoneFrequency range:........................70-10000Hz ±6dBSensitivity as lip mike:............380mV / 220ΩNoise suppression:.........................28dB at 1kHzImpedance:..................................................Low

Aviation 8103 MT52H79F-03

The Aviation 8103 helicopter headset has an ambient-noise compensated dynamic differential mi-crophone, specially designed for aviation intercom systems. The microphone amplifier is designedfor intercom systems with 5Ω impedance. The frequency range is adjusted for good speechrecognition. The earphones have a more limited frequency range, to give the best possible speechrecognition in the ambient noise of a helicopter.Spiral polyurethane cable with moulded NATO-standard connector.

MT52 microphone

MT52 microphoneType:.......................Dynamic differential microphoneFrequency range:..........................70-9000Hz ±6dBSensitivity as lip mike:...........................4mV / 220ΩImpedance:....................................................230ΩNoise suppression:.............................12dB at 1kHz

HTSU earphone

HTSU earphoneImpedance:.........................................................32Ωparallel connected to 16Ω for systems up to 60ΩOutput level at 0,5V / 1kHz:...........................89,5 dBa

HTS earphone

Hörtelefon HTSImpedance:.......................................................230Ωparallel connected to 165Ω for systems up to 600ΩOutput level at 0,5V / 1kHz:...............................81dBa

20

30

40

50

60

70

80

90

100

125 250 500 1000 2000 4000 8000 Hz

dB

20

30

40

50

60

70

80

90

100

32 63 125 250 500 1000 2000 4000 8000 16000 Hz0

0

110dB

20

30

40

50

60

70

80

90

100

125 250 500 1000 2000 4000 8000 Hz

dB

20

30

40

50

60

70

80

90

100

125 250 500 1000 2000 4000 8000 Hz

dB

20

30

40

50

60

70

80

90

100

32 63 125 250 500 1000 2000 4000 8000 16000 Hz0

0

110dB

Aviation 8003 MT52H79F-04 VI

The Aviation 8003 headset has an ambient-noise compensated dynamic differential microphone,specially designed for aviation intercom systems. The microphone amplifier can be adjusted foroutput signals in the range of 300–600 mV. The frequency range is adjusted for good speech recog-nition. The earphones have a broad frequency range for good sound reproduction. Straight poly-urethane cord, moulded connectors and a stereo/mono switch in the branching box. The earphonesare connected with a 1/4" stereo connector and the microphone has a PJ068 connector.

HTR-330 earphones

Hörtelefoner HTR-330Frequency range:.....................32-16000Hz -6dBImpedance:.................................................330Ωparallel connected to 165Ω for systems up to 600Ω

Output level at 0,5V / 1kHz:............................81,5dBaVolume control:...................................Approx. 23dB

20

30

40

50

60

70

80

90

100

32 63 125 250 500 1000 2000 4000 8000 16000 Hz0

0

110dB

MT52 microphone

MT52 microphoneType:.......................Dynamic differential microphoneFrequency range:...........................70-9000Hz -6dBSensitivity as lip mike:...........................4mV / 220ΩImpedance:.............................................230ΩNoise suppression:.............................12dB at 1kHz

20

30

40

50

60

70

80

90

100

125 250 500 1000 2000 4000 8000 Hz

dB

K117A amplifierFrequency range:...................................................750-10000Hz -6dBAmplification:...................300 – 680mV/220Ω at an input signal of 4mV/1kHzOutput impedance:.............................................................................LowConnection impedance:............................................................300-2000ΩSupply voltage:..............................................................................7-30VPower consumption:...................................................................4mA vid 27V

Weight:......................................................370gMicrophone connector:..................Type PJ068Earphone connector:................1/4” stereoCord length:...........................................1,35m

Weight:.........................................360gMicrophone connector:.............Type PJ068Earphone connector:....1/4” stereo connectorCord length:................................1,35m

K116 V2 amplifierFrequency range:.........................................300-10000Hz ±6dBAmplification:............................380mV/220Ω at an input signal of 4mV/1kHzOutput impedance:..............................................................Approx. 300ΩConnection impedance:.................................................500-1000ΩSupply voltage:....................................................................................7-15VPower consumption:....................................................10mA at 9V

Weight:........................................................370gConnectors:.............................Nexus TP-120

”European NATO”Cord length:.........................................0,4-1m

K115A microphone adapterAttenuation:...........................................................................................8dBOutput signal level:..................................................................0,4 mV / 220ΩOutput impedance:................................................................................LowConnection impedance:.................................................System impedance 5ΩSupply voltage:..............................................................................7-30VPower consumption:...................................................................4mA at 27V

K116 V2 amplifierFrequency range:...........................................................300-10000 Hz ±6dBAmplification:..............................380mV/220Ω at an input signal of 4mV/1kHzOutput impedance:...................................................................Approx. 300ΩConnection impedance:...............................................................500-1000ΩSupply voltage:..............................................................................7-15VPower consumption:..................................................................10mA at 9V

Weight:......................................................360gConnectors:.................................Nexus TP-120

”European NATO”

Cord length:..........................................0,4-1m

20

30

40

50

60

70

80

90

100

32 63 125 250 500 1000 2000 4000 8000 16000 Hz0

0

110dB

SUPERYACHT SPARES


HTS earphone

HTS earphoneImpedance:......................................................230Ωparallel connected to 115Ω

Output level at 0,5V / 1kHz:...............................81dBa

MT52 microphone

MT52 microphoneType:..................................................DynamicFrequency range:..........................70-9000Hz ±6dBSensitivity as lip mike:...........................4mV / 220ΩImpedance:....................................................230ΩNoise suppression:.............................12dB at 1kHz

Ground Mechanic MT72H7F-01

Effective noise-attenuating headset with ambient-noise compensated dynamic differential micro-phone and built-in microphone amplifier for reliable communication between ground crew andcockpit. The frequency range of the earphones gives good sound reproduction. The microphone ismounted on the left and has Peltor’s Quick Positioning, which allows quick and easy switchingfrom stand-by to active mode. The headset has a broad, comfortable headband, collapsible for theeasiest and safest transport and storage. Spiral polyurethane cable with Peltor’s standard J11moulded connector. Connects to the aircraft via an adapter with PTT button.


comfort must go hand in hand

Attenuation data for Peltor Ground Mechanic HeadsetThe Peltor Ground Mechanic Headset is tested and approved according to PPEdirective 89/686/EEC and applicable parts of the EN352–1:1993 European norm.Certificates issued by FIOH, Laajaniityntie 1, FIN–01620, Vantaaa, ID no. 0403.

AdapterFL9ESturdy box with easy-to-use PTT button andclamp for easy, effective attachment. Extremelyoil and cold resistant polyurethane extensioncord of 3–6 m. Spiral in the part that hangs fromthe aircraft body and straight in the part thatlies on the ground.Weight:………………………….........…….. 285gConnectors:………………...................….. PJ-051

SNR

31 dB

20

30

40

50

60

70

80

90

100

125 250 500 1000 2000 4000 8000 Hz

dB

20

30

40

50

60

70

80

90

100

32 63 125 250 500 1000 2000 4000 8000 16000 Hz0

0

110dB

The new Aviation 8000 seriesOur highly praised 7000 series headset now has awhole group of worthy successors.

The Aviation 8000 series has a more compactdesign. No protruding features that can snag onobstacles and affect safety and the cord is securelyencased in the microphone arm.

Remarkable comfortThe broad foam-and-fluid filled, breathing sealingrings seal effectively, but with minimal pressuredistributed over the entire contact surface. Thestainless sprung steel headbands maintain theirresiliency and provide an unbeatable distribution ofpressure. Plenty of space for the ears and a very lowweight!

Individual volume controlThe Aviation 8000 series has easily accessible controlswith inset volume and balance controls in one. Thissolution lets you compensate for different noisesituations and individual variations, such as poorhearing in one ear.

Positive communicationEffective noise attenuation through the entire speechfrequency area up to 25 dB. A special filter eliminateswind and breath noises.

• Small, lightweight and sturdy.• Microphone arm twists 180 degrees, allowing both right- and left-mounting.• 4-way adjustment with resistance settings – practically unlimited possibilities for individual settings.• Quick Positioning – from speech to stand-by without changing the basic settings.

New microphoneMT51, MT52

FM23 amplifierFrequency range:............................................................63-1600Hz -6dBAmplification:..............................200mV/200Ω at an input signal of 4mV/1kHzSupply voltage:............................................................................15-27VPower consumption:...................................................................18mA at 27V

Weight:......................................................330gConnectors:........................................U-174/U

FL9E-03Like the FL9E above, but the entire extensioncord is spiral. Length 1.5–6.5 m.Weight:………………………….......…….. 430gConnectors:……...............…………….. PJ-051

SNR

34 dB

H31 dB

M22 dB 32 dB

L16.9 26.1 33.3 37.9 35.5 33.5 36.6

3.6 2.4 2.8 2.0 2.3 2.2 2.4

13.3 23.7 30.5 35.9 33.2 31.3 34.2

Frequency 2

Mean att. 3

Stand. dev. 4Peltor AviationHeadset

APV

Model 125 250 500 1000 2000 4000 8000 Attenuation data for the Peltor Aviation Headset 8006, 8103, 8106The Peltor Aviation headset is tested and approved according to PPE directive89/686/EEC and applicable parts of the European EN352-1:1993 standard.Certificate issued by FIOH, Laajaniityntie 1, FIN-01620, Vantaa, ID no. 0403.

SUPERYACHT SPARES


Aviation – accessoriesPeltor constantly develops new accessories, particularly in the hygiene area, to make our headsetsas efficient and comfortable as possible for long periods of use.Accessories, spare parts and additional equipment are all developed and manufactured by thesame creative people who designed our headsets. This guarantees adaptability and safe function.


A headset for high demandsWhen the ground is 32,000 feet below you, you can’tafford to have anything go wrong.Perfect communication, convenient design, low weightand maximum comfort are essential requirements ofa headset in a noisy aviation environment, in the airand on the ground.

A challengePeltor has the knowledge, experience and enthusiasmto meet this challenge, having been developingheadsets for military, civil, sport and helicopteraviation since the early 1950’s. In fact we are leadersin many aspects of product development.

Safety firstOur headsets have no protruding features which cansnag. All contacts are encased and reinforced at ben-ding points. The low profile of the headband ensuresthat the headset sits firmly on the head and minimizesthe risk of bumping against obstacles.

The parallel connector means that each earphoneworks separately, so that if one fails, the other worksas usual.

Our new microphone arm features a securelyencased cord. The small, sturdy design with fourpositions gives even more effective communicationwith its increased flexibility.

These small, carefully designed and extensively testedfeatures are just some of the reasons why Peltorheadsets are so safe. We’ve known this for more than40 years!

Hygiene kitReplace sealing rings and attenuation cushionsquickly and easily. The set contains two sealingrings and two attenuating cushions.To ensure good function and hygiene, replacetwice a year.

Wind protectionAn effective wind muffler for microphones.One per package.

Clean single-use protectorsPackages of 100 pairs, which are easy to applyto the sealing rings.

Mike ProtectorAn effective single-use microphone protectorthat increases the microphone’s life span. About50 replacements/pkg.

Storage bagEffectively protects the headset during transportand storage.

Cable clampStress-relieving clamp that can be attached to alapel or pocket to keep the cord out of the way.

Accessories, spare parts and additionalequipment for Peltor Aviation headsets.

8003 8006 8103 8106 Ground MechanicMT52H79F-04 VI MT51H79F-01 VI MT52H79F-03 MT51H79F-02 MT72H7F-01

Hygiene kit HY79 HY79 HY79 HY79 HY73

Wind protection M40/1 M995 M40/1 M995 M40/1

Clean single-useprotectors HY100A HY100A HY100A HY100A HY100A

Mike Protector HYM1000 HYM1000 HYM1000 HYM1000 HYM1000

Storage bag FP0901 FP0901 FP0901 FP0901 FP0901

Cable clamp TKFL01 TKFL01 TKFL01 TKFL01 TKFL01

HY79

HYM1000 TKLF01M995M40/1

Peltor Aviation – total safety and

HY100A

SUPERYACHT SPARES


Peltor ABBox 2341, SE–331 02 Värnamo, Sweden

Tel +46 (0)370-65 65 65, Fax +46 (0)370-65 65 69e-mail: [email protected]

A V I A T I O N

Peltor AviationAbsolute world-classSafety and Comfort

Small – yet spaciousThe cups are light and comfortable. Despite theirsmall outer dimensions, they provide amplespace for the ears. This means both effectiveattenuation and good comfort.

Two-point fastenersIndividually sprung bands of special steel prov-ide an even distribution of pressure and stabil-ity despite the low contact pressure.

Pressure balancingAn ingenious channel system ensures effectivebalancing of pressure. Provides both comfortand excellent attenuation.

Broad, soft sealing ringsPeltor’s unique foam-and-fluid filled ringsdistribute pressure evenly and give a low sur-face pressure. A must when the wearer alsowears spectacles..

Peltor Aviation HeadsetsNoise-compensated microphoneHigh-quality speech reproduction even atambient noise levels of over 115 dB.

Quick PositioningShift between speech and stand-by withoutchanging your individual basic settings.

Foldable headbandAdjusts to the shape of any head. A broad, softhead cushion gives comfort and stability.Continuous height settings.

Frequency-compensatedsound reproductionPeltor earphones have a special frequency fil-ter that considers the attenuation characteris-tics of the cup. This provides the best possiblesound quality in noisy environments.

Safety connectionThe cord and contact are specially designed forthe best function and reliability. The contacts areencased and reinforced at stress points..

Peltor is registered trademark of Aearo Company. © Aearo Company 2000.

P008

075

DB1

8006

-GB

Aearo LtdFirst Avenue, Poynton, Cheshire

England, SK12 1FJTel. +44 (01625) 878320, Fax. +44 (01625) 877348

SUPERYACHT SPARES


Peltor Aviation - superyachtspares.com · Effective noise-attenuating headset with ambient-noise...

Documents

Transcript of Peltor Aviation - superyachtspares.com · Effective noise-attenuating headset with ambient-noise...