Peltec Timers 332
description
Transcript of Peltec Timers 332
n Current toroid located in control, with easy access for connectionn No shunt resistor requiredn Current adjustment via potentiometer, 1 to 20 Ampsn Universal input 24-240VAC and 24VDCn Monitored current must not exceed 100 Ampsn Relay output form: SPDT – 8 Ampsn Output indicator: Red LED n Single-phase applications n DIN rail mountingn UL and CE approvals, RoHS compliant
function
fEAtuRES
SPEcificAtionS
Peltec 332 current sensor is designed for single-phase overcurrent monitoring.
Set point is determined by adjustable potentiometer from 1 to 20 Amps.
Relay transfers on sensed overcurrent.
10/15/08
input terminals . . . . . . . . . . . . A1–A2
input voltage . . . . . . . . . . . . . . 24–240VAC (AC 50/60Hz), 24VDC
input voltage tolerance . . . -15% to +10%
Power consumption (max) . . 1.5VA
current range. . . . . . . . . . . . . . 1–20 Amps
time settings by . . . . . . . . . . . Potentiometer
Setting accuracy . . . . . . . . . . . 5%
Repeatability . . . . . . . . . . . . . . <1%
Limit values tolerance . . . . . 5%
overload capacity (max) . . 100A/10s
Relay output form . . . . . . . . . SPDT
Rated current . . . . . . . . . . . . . . 8 Amps
Switching capacity . . . . . . . . 2500 VA/ AC, 240 W/ DC
output indicator . . . . . . . . . . Red LED
operating temperature . . . -20°C to +55°C
Storage temperature . . . . . . -30°C to +70°C
Dielectric strength . . . . . . . . 4 kV
operating position . . . . . . . . any
Mounting . . . . . . . . . . . . . . . . . . DIN rail EN 60715
Protection degree . . . . . . . . . IP 40 from front panel
Wire size (max) . . . . . . . . . . . . 10AWG
Standards . . . . . . . . . . . . . . . . . EN 60255-6, EN 61010-1, UL, CE, RoHS
315-655-8476 n www.peltectimers.com
332cuRREnt
SEnSoR
15-18LED
Imax
IHysteresis
Input Voltage
300 Series
fEAtuRES WiRing DiAgRAM
2747 Route 20 East, Cazenovia, NY 13035315-655-8476 n www.peltectimers.com 10/15/08
15
16 18 A1
A2
A1 A2
15 18
16
Peltec332 cuRREnt SEnSoR
InputVoltage
Input terminals
Current setting
Output indicator
Sensed wire10AWG max
Output terminals
Input indicator
16
15 18
A1 A2