Phase2-A PDW-F75/75MD Service Training

Phase2-A Lineup FY07 1HPDW-F70CamcorderDeckPDW-F75[Oct]DiscontinuedPDW-F350LPDW-F355L [Oct]PDW-F330L/KPDW-F335L/K [Oct]FY07 2HFY06PDW-F30PDW-75MD [Dec/E]PDW-70MD

PDW-F75New Features

F75F70PDW-F75Overview

PDW-75MD Overview75MD70MDChanges of the Front Panel are the same as PDW-F75

DVCAM RecordingDVCAM Recording via SD base band Input w/PDBK-104SD-SDI or Composite Input* i.LINK (AV/C) input is NOT possible* Down-convert recording is NOT possibleSD Closed Caption* NOT supported during up-conversion.

DL Long Duration Support ; Recording Media & Time

DL SupportUsable Professional DiscsSingle layer disc 23.3GB PFE23/PFE23ADouble layer disc 50GB PFD50DLA**Caution** If DL disc is inserted into PDW-F70,Error 03-354 occurError content; Focus servo of OP 0 side does not work.P1, P2, & P10 Drives do not have a sensor to detect DL disc hole. -> Servo does not lock (due to finer track pitch) and DL disc cannot be identified. Power Off does not delete the error.Countermeasure; Change to Correct type of disc and error is removed from display but still exist in error log.

D/C Response & Function improvementImage Enhancer ON modeImage Enhancer OFF modeF70F75HDW-M2000Improvement of Response & Function1. Filter response (same as HDW model)2. Image Enhancer - OFF Mode is added3. EC, SQ & LB are selectable in both Rec/PB modes4. Semi-Letter Box is supported (14:9, 13:9)5. 486 line vs 480 line of PDW-F70

Additional Menu Item / Menu Change(1)MENU GRADE BASIC/*ENHANOPERATIONAL FUNCTIONREC FORMATHQ, *SP, LP, DVCAMCONTINUOUS REC *OFF /AUTOFIND MODE CLIP/*RSTDISPLAY CONTROLHD CHARA HD2 (HD1 Clean, HD2 Char) *ALL (HD1 & HD2 Char) OFF (HD1 & HD2 Clean)SD CHARA SDI (Comp Clean, SDI Char) COMP (Comp Char, SDI Clean) *ALL (Comp & SDI Char) OFF (Comp & SDI Clean)TIME CODEVITCOFF,*ONINTERFACE SELECTREMOTE I/F i.LINK / *9P/232 / PARA / HD-SDI

Additional Menu Item / Menu Change(2)VIDEO CONTROLINT VIDEO SG (SD) *CB100 /BBSD BLANK LINE - ALL LINE *------ / BLANK/ THROU LINE12 *BLANK / THROU ---------- *BLANK / THROU LINE20 *BLANK / THROU LINE21 *BLANK / HALF / THROUREFERENCE SEL INPUT / *AUTOCC (F1) BLANK *OFF / ON (NTSC)CC (F2) BLANK *OFF / ON (NTSC)WIDE MODE - OUTPUT *AUTO/ OFF /ON - INTPUT *AUTO/ OFF /ON DOWN CONVERTLETER BOX MODE *16:9 / 14:9 / 13:9H CROP POSITION -120 *0 120DETAIL GAIN OFF / *LOW / MID /HIGH

Optional Products InformationPDBK-101/102/103/104/A640 can be used on PDW-F75/75MDOperation manual of the above models will be revised at ex-factory of PDW-75MD.Main changes (together with F75/75MD support)PDBK-101 (Ethernet)Login Password is the model name being installed (PDW-F75).PDBK-104 (SD SDI and Composite Input)DVCAM Recording is available.DVCAM logo label is included. PDBK-A640 (Cart usage disc area front panel)Model name label (PDW-F75) & PD DL logo label are included.

Differences of 75MD from F75 & 70MD HardwareComparing to PDW-F75No differenceComparing to PDW-70MDDPR-270 board -> DPR-291 boardRX-93B board -> RX-93A boardP10 Drive -> P100 Drive, Dual layer

SoftwareComparing to PDW-F75SD SDI can be input at HD SDI Input terminal.Unnecessary menu deleted as MD machine.

PDW-F70 Version up possible items

PDW-F75/75MD

(Change list from PDW-F70/70M)Function/FeatureDVCAM Recording (common for F75/75MD) - With the following condition, SD INPUT recording is supported. 1) Connecting DATA Bus to SDV_IN of IC400 (NOVA), 2) PDBK-104 is installed.Down-converter response & Function added. (common for F75/75MD) - VENUS (IC3500) is newly added that improving the conversion line number (480H -> 486H) - D/C mode change in REC mode is supported. - Response improved by changing Filter Tap number. - Crop Position is supported. - Semi Letter Boxes (14:9, 13:9) are supportedDevise of IC200 is changed. (common for F75/75MD) - VSP VENUS REF Signal lock support (only F75) - New menu is added on enabling REF signal lock in PB mode. OUTPUT BLANK function is added. (only F75)Boards construction (Common for PDW-F75 and PDW-70MD) - DPR-270 DPR-291 (Reason: Function added due to change of HW) - RX-93A board is used for PDW-F75/75MD. (RX-93B is used for PDW-70MD.) PDW-75MD has the following function which is same as PDW-70MD. SD SDI signal can be input at HD SDI input connector by switching RS232C. (SD SDI embedded audio is not supported.)

Option Slot1DPR-291 Main BoardFront Panel Assembly KY-580 / HP-130P100 DriveAC Power SupplyFAN MotorEM-5REAR Panel Assembly VP-60 / AU-301 / APR-75HDSDI moduleStructureOption Slot2LCDMonitorDifference from F70

DPR-291DR-606DriveHP-130KY-550EM-5OptionPDBK-101OptionPDBK-102/103/104RX-93PS-688MS-80ENC-101APR-75VP-60AU-301Frame DiagramBoard to BoardConnectorHarnessAC INFan MotorSLOT1SLOT2CN3502CN102CN103CN110CN111CN112CN2202CN8003pin4pinCN1CN14pin30pinCN113CN100CN106CN3502CN49pinCN16pinCN107CN3501CN1401CN103CN100ATAPower50pinCN101CN102CN101CN102CN103CN100CN10114pinHDSDI (BNC)CN100CN100Audio IN/OUT (XLR) REF. , TC IN/OUT , AES EN/OUT , Audio Monitor (Pin)Video Etc I/FAudio I/FAudio Process (A/D,D/A)Memory StickSuperCapacitorHead phoneFront PanelMain BoardPower SupplyHDSDI moduleHD EncoderDifference from F70

ENC-101KY-550IC2500 GOTAIC2900 ZATARX-93ADRAGON A-Model Video Signal Flow DiagramPCI BUSIC1700PROXYDSPHDSDI OUTCPST OUT

LCD PanelOUTSearchATABusIC1100GEOSSDRAMController1-OPIC200 VENUSVideo Delay (HD IN)Up-convert (SD IN)IC2700VISSDSDI OUTIC3109SDI P/SIC2808RGB D/A HOST I/FBridgeSDI FormatIC2807YPbPr D/A,CompositENCCharaGenCharaMix,WSS/VBIDAdd,VITCPROXUC INThumbnailPROXFILNormal/SlowIC2300i-LinkPHYIC1900CPUVRIC400NOVAD-subIC100TORINOENCFIFO96HDelayCharaMIXCharaGeni-LinkFIFO x2DDR x2IC300LCDGraphicIC 300HD/SD SDIS/PDeFormatterHD SDIP/SFormatterIC200FPGAIC501KYCPUIC2800XGA ScaleSetupADDAESENC/DECSDRAM x2SDRAMSDRAMATAI/FPCII/FETHERSDRAMx2SDRAM x6HDSDI INSDSDI INPDBK-102/PDBK-103/PDBK-104 MemconResizeThumbResizerscreenMemconOSDMixResizesearchSDRAMx2SDRAMx2SDRAMx2YADDDVCodecVP(SD)VP(HD)Y/CMUXOptionSDITGBEDIC900DENEB#AIC1000DENEB#BSDRAM x3SDRAM x2DC2-3PDIC2803,2804,2805IC2703,2704IC202,203IC305.306IC700IC701IC101,102IC1702,1703IC901,902IC1001,1002IC1400,1401,1402IC1403,1404,1405CN2202CN2203IC2610,2612IC2602IC3003iC402LCDDriverGb-EtherDVDC90H Delay1920 14401920 1440UpSampleDownSamplePreFilterIC300 VISPsFPDownConv2-3PDVFMemconDVINXGA RBGHD YPbPrDR-606PDBK-101Disc DriveI_DENEBNOVA_ZATA_SDI_HDVIS_HDBBO_HDBBLRZ_BSTA+/-,TB+/-VIS_GOTA_HDBBRX_VSP_HDVSP_IN_SDBBNOVA_VSP_SD25GOTA_HDBB_OUT1GOTA_HDBB_OUT1GOTA_VIS_LCD_HDBBVIS_LCD_VIDEOZATA_SD_OUTZATA_SDSDI_OUTVIS_NOVA_SDBBNOVA_VIS_DECVIS_GOTA_HDBBENC_V_DATATORINO_BSDTDENEB_STDTDENEB_A_BSDTDENEB_B_BSDTVSP_HDUPDV_DATATA+/-,TB+/-VENUSD/C)DownconvertHD in)Video Delay(Sd In)DDR x2CAM_VSDV_INEN2.5V3.3VLatch3.3V2.5VD-VENUS_IN_SDBBAddition of the new signal flow

Difference from F70

DVCAM Recording supported With the following condition, SD INPUT recording is supported. -Connecting DATA Bus to SDV_IN of IC4700 (NOVA)when PDBK-104 is installed.

ENC-101KY-550IC2500 GOTAIC2900 ZATARX-93DRAGON A-Model Video Signal Flow DiagramPCI BUSIC1700PROXYDSPHDSDI OUTCPST OUT

LCD PanelOUTSearchATABusIC1100GEOSSDRAMController1-OPIC200 VENUSVideo Delay (HD IN)Up-convert (SD IN)IC2700VISSDSDI OUTIC3109SDI P/SIC2808RGB D/A HOST I/FBridgeSDI FormatIC2807YPbPr D/A,CompositENCCharaGenCharaMix,WSS/VBIDAdd,VITCPROXUC INThumbnailPROXFILNormal/SlowIC2300i-LinkPHYIC1900CPUVRIC400NOVAD-subIC100TORINOENCFIFO96HDelayCharaMIXCharaGeni-LinkFIFO x2DDR x2IC300LCDGraphicIC 300HD/SD SDIS/PDeFormatterHD SDIP/SFormatterIC200FPGAIC501KYCPUIC2800XGA ScaleSetupADDAESENC/DECSDRAM x2SDRAMSDRAMATAI/FPCII/FETHERSDRAMx2SDRAM x6HDSDI INSDSDI INPDBK-102/PDBK-103/PDBK-104 MemconResizeThumbResizerscreenMemconOSDMixResizesearchSDRAMx2SDRAMx2SDRAMx2YADDDVCodecVP(SD)VP(HD)Y/CMUXOptionSDITGBEDIC900DENEB#AIC1000DENEB#BSDRAM x3SDRAM x2DC2-3PDIC2803,2804,2805IC2703,2704IC202,203IC305.306IC700IC701IC101,102IC1702,1703IC901,902IC1001,1002IC1400,1401,1402IC1403,1404,1405CN2202CN2203IC2610,2612IC2602IC3003iC402LCDDriverGb-EtherDVDC90H Delay1920 14401920 1440UpSampleDownSamplePreFilterIC300 VISPsFPDownConv2-3PDVFMemconDVINXGA RBGHD YPbPrDR-606IC600DRVCPUIC400SV DSPPDBK-101Disc DriveI_DENEBNOVA_ZATA_SDI_HDVIS_HDBBO_HDBBLRZ_BSTA+/-,TB+/-VIS_GOTA_HDBBRX_VSP_HDVSP_IN_SDBBNOVA_VSP_SD25GOTA_HDBB_OUT1GOTA_HDBB_OUT1GOTA_VIS_LCD_HDBBVIS_LCD_VIDEOZATA_SD_OUTZATA_SDSDI_OUTVIS_NOVA_SDBBVIS_ZATA_SDBBNOVA_VIS_DECVIS_GOTA_HDBBENC_V_DATATORINO_BSDTDENEB_STDTDENEB_A_BSDTDENEB_B_BSDTVSP_HDUPDV_DATATA+/-,TB+/-VENUSD/C)DownconvertHD in)Video Delay(Sd In)DDR x2CAM_VSDV_IN525/60i: Composite INPUT DVCAM REC/EE625/50i: SDSDI INPUT DVCAM REC/EEEN2.5V3.3VLatch3.3V2.5V3.3V2.5VD-VENUS_IN_SDBB

DVCAM RecordingWith PDBK-104 Option)

Downconverter response & Function added. (common for F75/75MD) - VENUS (IC3500) is newly added that improving the conversion line number (480H -> 486H) - D/C mode change in REC mode is supported. - Response improved by changing Filter Tap number. - Crop Position is supported. - Semi Letter Boxes (14:9, 13:9) are supported

Comparison of Down-Converter ICDifference from F70

Devise of IC200 is changed. (common for F75/75MD) - VSP VENUS

Comparison of Up-Converter ICDifference from F70

REF Signal Gen-lock support (only F75) - New menu is added to enable lock in PB mode to REF Input signal.

PDW-F70 REF Lock

INPUTOExist X:No existREF INOExist X:No existModeINPUT SelectHDSDIINTSGi.LINKFAMOptionPDBK-101NetworkPDBK-102TSPDBK-103HD AnalogPDBK-104SDSDICompositei.LINKConnectedi.LINKUnconnectedAnalog INPUTEXT SYNCOOREC/EEHDSDIINPUTREFFREEFREELocked by INPUT signalHD AnalogINPUTEXT SYNCINPUTSDINPUTPBHDSDIINPUTREFFREEFREEHD AnalogINPUTEXT SYNCINPUTSDINPUTOXREC/EEHDSDIINPUTFREEFREEFREELocked by INPUTsignalHD AnalogINPUTEXT SYNCINPUTSDINPUTPBHDSDIINPUTFREEFREEFREEHD AnalogINPUTEXT SYNCINPUTSDINPUTXOREC/EEREFREFFREEFREEFREEREFREFREFPBREFREFFREEFREEFREEREFREFREFXXREC/EEFREEFREEFREEFREEFREEFREEFREEFREEPBFREEFREEFREEFREEFREEFREEFREEFREE

PDW-70MD REF Lock

INPUTOExist X:No existREF INOExist X:No existModeINPUT SelectHDSDIINTSGi.LINKFAMOptionPDBK-101NetworkPDBK-102TSPDBK-103HD AnalogPDBK-104SDSDICompositei.LINKConnectedi.LINKUnconnectedAnalog INPUTEXT SYNCOOREC/EEREFREFFREEFREELocked by INPUT signalREFREFREFPBREFREFFREEFREEREFREFREFOXREC/EEHDSDIINPUTFREEFREEFREELocked by INPUT signalHD AnalogINPUTEXT SYNCINPUTSDINPUTPBHDSDIINPUTFREEFREEFREEHD AnalogINPUTEXT SYNCINPUTSDINPUTXOREC/EEREFREFFREEFREEFREEREFREFREFPBREFREFFREEFREEFREEREFREFREFXXREC/EEFREEFREEFREEFREEFREEFREEFREEFREEPBFREEFREEFREEFREEFREEFREEFREEFREE

REF Signal lock spec. changed (only F75)

Setting Procedure

SETUP MENU VIDEO CONTROL REFERENCE SEL -> AUTO/INPUTAdditionNew menu is added on enabling REF signal lock in PB mode. *Changes from current model.AdditionAdditionAddition

INPUT

OExist X:No existREFINOExist X:No existModeINPUT SelectHDSDIPDBK-103HD AnalogPDBK-104SDSDICompositeAnalog INPUTEXT SYNCINPUTAUTOINPUTAUTOINPUTAUTOINPUTAUTOOOREC/EEHDSDIINPUTHDSDIINPUTHD AnalogINPUTHD AnalogINPUTEXT SYNCINPUTEXT SYNCINPUTSDINPUTSDINPUTPBHDSDIINPUTREFHD AnalogINPUTREFEXT SYNCINPUTREFSDINPUTREF

INPUTdetectINT SGmodeREF LockINPUT LockFree runONOFFStartNOREF existINPUT existNOREF. VideodetectReference Flow chartPDW-F75 REC/PBREFERENCE SEL = INPUT*same as PDW-F70

INPUTdetectINT SGmodeREF LockINPUT LockFree runONOFFStartNOREF existINPUT existNOREF. VideodetectReference Flow chartPDW-F75 PB onlyREFERENCE SEL = AUTOREF. VideodetectREF existNO

INPUTdetectINT SGmodeREF. VideodetectREF LockINPUT LockFree runONOFFStartNOREF existINPUT existREF existNONOREF. VideodetectReference Flow chartPDW-75MD REC/PB*same as PDW-70MD

Relation with other option boardsOption BoardDPR-291Main BoardNET-1OptionSLOT1SLOT2SLOT2PDBK-104SD UPCONSLOT2PDBK-103Analog HDPDBK-102TS I/OSame as PDW-F70/70MD

SLOT 1SLOT 2PDBK-101 (Network Board)PDBK-102 (TS Board)PDBK-103 (Analog HD Input Board)PDBK-104 (SD Input Up-converter Board)PDW-F75OOOOPDW-75MDOOOO

Phase2 A Service TrainingVDR Software

OutlineFunction improvementMemory Stick PRO (Up to 2GB) supported Menu operability improvedNew Function addedClip Continuous RECHD-SDI Trigger RECRS-232C command addedALARM of 300clipsLast ALARMInternal Log Acquisition Trouble FixedAll Issues up to Phase2 Ver1.630PKG version up in recovery mode cannot be done after an incidental power down during Firm Up process. Still does not function, maybe next version upgrade Items in Red are explained on the next several page.

MENU Operability Improvement1. Customized setting will not be changed to the Default setting even System Frequency changed. 60i/30p/24PD50i/25p24pCURRENTFollowing the system frequency information stored in NVRAM, a corresponding MENU data stored in EEPROM is read. Storage area has been classified to the same system frequency group of the data configuration. It is avoiding necessity of the initialization. 3. When MENU is operated, LCD Display Mode should be FULL frame automatically. After MENU operation finished, LCD display frame return back. If Display Mode is changed during MENU operation, the changed Display Mode should be kept.

2. The Default of MENU GRADE is ENHANCED. F75ENHANCED75MDBASIC

Clip Continuous RECFor F75, it can be done from only Remote(9pin/RS-232/HDSDI Trigger REC)

If Recording starts after the following actions, Clips should be separated.For F335/F355 1. Disc Eject / Inject. 2. Power OFF / ON. 3. MENU Clip Continuous REC ON -> OFF->ON. 4. CLIP operation (Clip Delete / Lock Clip) 5. MENU (REC Format / Audio REC Mode) is changed. 6. FAM / FTP mode is used.

As for F75, in addition to the above,7. Rec. starts except from REC PAUSE mode.

RE-TAKE cannot be done in the Clip Continuous REC

Clip Continuous RECFIND MODECLIP: Relocated on a Clip to Clip with NEXT/PREV. (same as current)R.ST: Relocated to every Rec Start with NEXT/PREVAs for F75, in addition to the above, Rec Start Em Thumbnail Display can be got by the following procedure. - Thumbnail display changes to Rec Start Em display by Display button. - Rec Start Em display appears when turning Thumbnail display on after that.Chapter/Expand

1 frame ~ 2 sec.Clip Continuous REC (Precaution points)REC STARTREC STARTClip 1 Take1Video/AudioClip 1 Take2Video/AudioClip 1 Take3Video/AudioHFMinimal 2 sec.Clip 1 Take4Video/Audio1 frame ~ 2 sec.1 frame ~ 2 sec.REC STARTREC STARTMinimal Recording duration is 2 second. Recording is finished by Proxy GOP scale.

2. There is 1 Frame to 2 sec.(max) empty area (no Rec. area) between Take and next Take. Therefore, possible Recording time is reduced in Clip Continuous REC.

ex; If 30sec. Record is repeated, 3%(average) to 7%(max.) of Rec. time reduced.

3. With a Disc which was Clip Continuous REC. implemented, Full Salvage cannot be done on the F70/F330/350F w/Ver1.630 or before.

HD-SDI Trigger REC2. Model name of the possible machine.HDW Camcorder with a version having HD SDI REMOTE function.PDW-700 (XDCAM Phase3 Camcorder)4. Process in this operation mode effectiveIn accordance with a received command, the machine will keep ORIGINAL State/STOP/REC. All function except Eject are prohibited regardless LOCAL ENABLE MENU setting. 3. HD SDI ANC Packet ANC2 packet for Audio control packet (CH5 CH8) is used as VTR control command packet. That has three values such as Invalidity packet / STOP Command / REC Command.

1. OutlinePOOL shooting that is popular in Japan is possible with a HD-SDI cable which enabling Rec. start / stop.

RS-232C Command Addition2. Command Addition1. INDEX WRITE (EXP-1 + 96H)Mark ShotMark 1 on a disc. If the Mark number becomes over the registerable essence mark number, it does not work.

2. INDEX SCAN FWD (EXP-1 + 90H)Move to ShotMark1 in forward direction, and repeat PB 10sec. Mode till DISC END.

3. INDEX SCAN REW (EXP-1 + 91H)Move to ShotMark1 in reverse direction, and repeat PB 10sec. Mode till DSC TOP.

4. INDEX SEARCH FWD (EXP-1 + 92H)Move to a specified ShotMark1 in forward direction, and start PB.

5. INDEX SEARCH REW (EXP-1 + 93H)Move to a specified ShotMark1 in reverse direction, and start PB.1. OutlineRequest received from Medical operation field site.Important scene can be marked via RS-232C during Rec. mode to review the scene.

300 Clip Alarm2. F335/F3551. Recordable Clip number can be displayed on the LCD display. DISC E- - - - - - -B 174BATT E- - - - - - -F

2. Pre Alarm Near Max#When the Recordable Clip number becomes under 10, its number is blinked and the Alarm is displayed on the LCD display.

3. Alarm when Clip number becomes 300Max#ClipsAlarm is displayed on the LCD display.1. OutlineTo aware 300 Clip limitation before it is occupied. 3. F75In case that Sub Status changed to REMAIN in SetupMENU Display Control,TCR 00:00:00:00 STOPREMAIN 86m 174c

Last ALARM2. ProcedureThis menu is located on the bottom layer of SYSTEM MENU of TOP layer which appears when pressing MENU button. SYSTEM MENU LAST ALARMLAST ALARMSETUP MENUTC PRESETREMOTE MODE IS SELECTEDREMOTE!DISC MENUDATE/TIME PRESETSET REMOTE/LOCAL/NETWORKDATE/HOURS METER SWITCH TO LOCALTC

//LAST ALARM

1) Move the cursor to LAST ALARM and press button to show LAST ALARM. 2) Press the again to show the time of Alarm happened. 3. Special Technique Registered Alarm list can be seen by press Shift and buttons on the ALARM Menu. But it is only cut-down contents.1. OutlineReconfirmation of the last Alarm is possible even it is missed. (The Alarm content is deleted by Power OFF)

Internal Log Acquisition 2. Procedure1) Maintenance MENUService SupportMacro LogMemory Stick Write 2) Press SET button to execute, the Internal Log will be stored into Memory Stick.

Log contents in the following file name are stored in Memory Stick ddhhmmss.Txt dd: date when Log has been stored. hh: time (hour) when Log has been stored. mm: time (min.) when Log has been stored. ss: time (sec.) when Log has been stored.

(ex; 0911115720.txt 11:57:20 9th/November )3. LimitationF335/F355 do not have this function.Only SYS CPU Log is available. (Drive/NET/KY CPU are not supported.Power OFF after Log acquired. 1. OutlineIn case that Error/Abnormal performance/Hang up happen at the field, prompt action can be done with the Internal Logs showing conditions.