PDU6-SW USER GUIDE - Penn Elcom Online · 2016. 1. 18. · PDU6-SW USER GUIDE Earth Strap Point Set...
Transcript of PDU6-SW USER GUIDE - Penn Elcom Online · 2016. 1. 18. · PDU6-SW USER GUIDE Earth Strap Point Set...
![Page 1: PDU6-SW USER GUIDE - Penn Elcom Online · 2016. 1. 18. · PDU6-SW USER GUIDE Earth Strap Point Set Back Application All components used in this unit conform to current RoHS, CE &](https://reader035.fdocuments.us/reader035/viewer/2022071604/613fb218b44ffa75b8046445/html5/thumbnails/1.jpg)
PDU6-SW USER GUIDE
All components used in this unit conform to current RoHS, CE & UL certification BS1363A, BS1362, SASO 2203
(EMI:EN55022 (CISPR22) Class B; EN61000-3-2,3 EMS:EN61000-4-2,3,4,5,6,8,11; Light industry level, criteria A)
E&OE
Designed & Made in the UK by RACKZ LTD for the Penn Elcom Group
Unit 10 21-23 Wood Road - Kingswood - BRISTOL – BS15 8DT - UK
Tel: (+44) 01179352727 Fax: (+44) 01179352733 - Email: [email protected] Web Site: www.rackz.co.uk
RED Power Indicator
Shows there is AC power to the unit.
It is independent of the Switches
Should this not be ON then -
1st check the power is connected
2nd check the plug fuse & replace
if necessary.
PLEASE NOTE:
In the event of a Power Surge or
Lightning Strike the protection
circuit will be activated.
This will result in a blown fuse.
The brackets can be fitted
in any of 6 positions to suit
the required application
Earth Strap Point
For attachment to the rack
unit
Vertical Set Back Application
Horizontal Rack Rear
Set Back Application