PDS Series - cdn-assets.iriss.com
Transcript of PDS Series - cdn-assets.iriss.com
Partial Discharge Sensor Ports (PDS) are used in conjunction with a handheld Ultrasound measurement device, allowing the end user to take closed panel Ultrasound decibel readings and listen to the audible signals coming from a piece of equipment. In this way, problems like Arcing, Tracking and Corona can be detected without the need for maintenance personnel to wear PPE. The PDS is a small square plate with no cover with IP10 (NEMA1) rating and has a 3.5mm female adapter for connection to a handheld ultrasound. Note that a special adapter cable may be required depending on the brand and model of handheld being used. Adapter cables for SONUS-XT and SONUS-PD are available from IRISS. Increase your Reliability with our technology!
Listen Through Panels
Quickly and Safely performclosed panel airborne Ultrasound
inspections of electrical equipmentincluding Switchgear, Switchboards,Panelboards, Transformers, Motor
Control Centers and ProcessEquipment Panels.
PDS SeriesPartial Discharge Sensor Port
Save Time and Money
With the installation of these portsthe inspector has the ability to use asingle point to listen into the cabinet
instead of tracing the seam andremoving any diffraction of signal
that may occur.
Safety Without PPE
The PDS gives inspectors theability to safely perform closed-
panel energized inspections, removing the need to open the gear
and dress in full, heavy PPE.
©2020 IRISS, Inc. All rights reserved. Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is prohibited. Imagery for illustration purposes only. Specifications are subject to change without notice. Modification of this document is not permitted without written permission from IRISS Inc.
www.iriss.com
North Ameriaca (HQ)+1 (941) 907 9128
LATAM +1 (941) 704-4445
EMEA +44 (0) 1245-399-713
APAC+1 (941) 524-3340
*Caution: These dimensions are not installation dimensions. Do NOT cut prior to receiving your IRISS IR window and installation template.Specifications are subject to change without notice. For the most up-to-date specs, go to www.iriss.com
SpecificationsPart Number PDS
General Specifications
Overall Height 7.62 cm (3 in)
Overall Width 7.62 cm (3 in)
IP/ NEMA Environment Rating IP10 / NEMA 1
Operating Temperature -40°C (-40°F) to 273°C (523°F)
Body Material Powder Coated 5052 Aluminum
Gasket Material UL 94 5VA TPE; -40°C (-40°F) to 273°C (523°F)
Hardware Material 316 Stainless Steel
Voltage Range Any
Automatically Grounded Yes
Ultrasonic Receiver Specifications
Center Frequency 40.0± 1.0KHz
Bandwidth (-6dB) 2.5KHz
Capacitance at 1KHz ±20% 2400 pF
Max. Driving Voltage (cont.) 20 Vrms
Total Beam Angle -6dB 50° typical
Receiver Housing Material Aluminum
Inspection Capabilities and Applications
Ultrasound; Medium/High Voltage Applications
Certifications
Certified by UL (USA) & cUL (Canada) to the following standards: 50V, 50E, 756C: Impact and Flammability, 746C & 746A-2012, 1558: Impact and Load Resistance, 508A: ANSI 508A
CSA C22.2 No. 14-13, C22.2 No. 14-10, C22.2 No. 94-M91, C22.2 No.94.1-07, C22.2 No. 94.2-07
IP10 / NEMA 1
Lloyds of London Type Approval
American Bureau of Shipping (ABS)
DNV (Det Norske Veritas) P261.1E Maritime, Vessel and Offshore Applications
IEEE C37 20.7 Type 2B, C37 20.2.a.3.6: Impact and Load
IEC 62271-200, 60262271-200,60298 Appendix A, 60068-2-6:2007, 60068-2-3, 60068-2-78:2012
Other
Warranty Unconditional Lifetime Warranty