PDM Engineering Pvt. Ltd
-
Upload
mithun-sarkar -
Category
Documents
-
view
39 -
download
0
description
Transcript of PDM Engineering Pvt. Ltd
PDM ENGINEERING PVT. LTD
(BEVEL GEAR CUTTING TOOLS)
Presented By:-Shekhar Pandey
Mithun Sarkar
Straight bevel gears cutting
METHODS: Form Milling – using a cutter (with the same form as
the tooth face) and creating first one, than the opposite face flank of the tooth
Involute-generating Milling– using two cutters representing one tooth of a rack and a generating process for creating a tooth profile
Shaping – using a shaping rack tool and a generating process for creating a tooth profile
Broaching – using rotational broach
2
Straight bevel gears involute-generating milling
3
Coniflex Cutter (Ring Type)
Gears cut by these tools can be crowned in a lengthwise direction.
Material: H. S. S. AISI - M2
Coniflex Blades (24 LH + 24 RH)
Inserted Type Blades Suitable for cutting large Straight Bevel Gear.
Material: H. S. S. AISI - M2, M35
Straight bevel gears - shaping
6
Pair of Straight bevel gear shaping generation cutter blades Type I to IV suitable for all types of machines,
are supplied in module range 0.3 to 20 mm. Material: H.S.S AISI - M2, M35.
8
Straight bevel gears - broaching
Segmented Type Straight Bevel Gear Cutter
Roughing, finishing & completing type suitable for 16", 21" & 25" Diameter cutter bodies.
Deburring Tools.
Material:
H.S.S AISI -M2
Konvoid Blades
ZFTK 250 x 5 Set OF 44 Blades ZFTK 500 x 10 Set of 56 Blades Russian Konovoid Blades Set of 36 Blades Material:
H.S.S AISI - M2, M35
For Klingelnberg Machines Set of 72 Blades. Material:
H. S. S. AISI - M2, M35
Curved bevel gears cutting
METHODS:
Gleason – teeth curved in the form of circle
Oerlikon – teeth curved in the form of epicycloid
Klingelnberg – teeth curved in the form of involute
11
Gleason method
Tool is a composition of a round body and cutting tools.They can be adjusted separately.
Spiral Bevel Gear Cutting Tools Roughing and Finishing Crown Wheel and Pinion
Blades Suitable For 3.5" To 18" Diameter Cutter Bodies.
Material: H. S. S. AISI - M2, M35.
Technical Specifications Required for Ordering Blades To Cut Pinion & Crown Wheel
Pinion & Crown - Wheel Roughing Blades An inserted-blade face mill cutter designed for high
production pinion & crown-wheel roughing operations where an increased number of blades equates to decreased production cycle times.
Pinion & Crown - Wheel Finishing Blades
The single-cycle inserted-blade finish cutter is designed with alternate inside and outside cutting blades arranged in a broach fashion. Indexing within a gap allows this cutter to finish a tooth space in a single rotation of the cutter without withdrawing from full depth.
Other Spiral Bevel Gear Cutting Blades Universal Cutter Head - Two Part, 5-Start Cutter
Sets For Right Hand & Left Hand Spirals. Material: H. S. S. AISI - M2, M35.
Kurvex Type Blades (L.H. & R. H.) Manufacture in both with Toprem and without Toprem,
suitable for WMW.
Spiral Bevel Gear Machines. 75 mm Dia - Set of 8 Blades 106 mm Dia. - Set of 10 Blades 150 mm Dia. Set of 12 Blades 212 mm Dia - Set of 16 Blades 300 mm Dia - Set of 18 Blades
Material : H. S. S. AISI - M2, M35
Solid Type Cutter
A highly productive cutter used for completing and finishing operations. It's made with the blades and cutter body as one integral unit, and is particularly useful for cutting smaller fine pitch gears.
Solid Body Cutter from 1.1" to 6" Cutter Diameter. Material : H. S. S. AISI - M2.
Curved bevel gears - Oerlikon
19
Curved bevel gears - Oerlikon
20
Curved bevel gears - Oerlikon
Spiromatic Blades From Dia. 70 mm to 108 mm
suitable for Oerlicon Spiral Bevel Gear Machines.
Material :
H. S. S. AISI - M2, M35
Oerlicon Blanks 7.5 x 9 x 95 mm 7.5 x 9 x 100 mm 13.5 x 17 x 110 mm Material :
H.S.S AISI -M2, M35
Curved bevel gears-Conventional Cutter Blades
Conventional Circular Cutters Conventional Circular Cutter
Blades For Small Spiral Bevel Gear
Normal Module Range from 0.3 to 1.3 Mη
Material :
H. S. S. AISI - M2, M35
Curvic Coupling Blades Curvic Coupling Cutter
Blades for 6" / 7.5'' / 9" Cutter Diameter.
Material :
H. S. S. AISI - M2, M35
Curved bevel gears-Future Cutter Blades
High Power Gear Carbide Tools
High Power Gear carbide tools suitable for machining after case hardening.
Material : CARBIDE
Dry Cutting Blades Carbide Dry Cutting Blades
Available In Rough / Semi Finish / Finish Condition Along With
All Angles, Radius and Toprem
Material : Carbide ISO K10 / K10F Grade
THANK YOU