dispensing heads - Perlick Corporation heads perlick Features • Pure copper coolant lines and cold...

Revised date 09.10.09

Note: to navigate within this document please activate the BooKMARKS panel

in your PDF reader program!

8300 West Good Hope Road • Milwaukee, WI 53223 • Phone 414-353-7060 • Fax 414-353-7069Toll Free 800-558-5592 • E-Mail: [email protected] • www.Perlick.com

dispensing headsperlick Features

• Pure copper coolant lines and cold block maintain chilled beverage temperature.

• Insulated dispensing head ensures a perfect temperature right up to the faucet.

• Factory-balanced restrictors control beverage flow and assure solid beer from the faucet with every pour.

• Available in a variety of styles and finishes.

• European style dispensing heads available with illuminated medallions to enhance branding.

Century dispensing heads are insulated right up to the faucet, eliminating hot spots which cause over-foaming.

4045-3BIM

66500-6B

4007-6BIM

Note: to navigate within this document please activate the BooKMARKS panel

in your PDF reader program!


Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.

indeX

dispensing heads Winged Towers [Standard & Illuminated] Winged Tee Towers [Standard & Illuminated] Winged Bridge Towers [Standard & Illuminated] sexy Towers [Illuminated] Lucky Towers panther Towers seven Towers [Standard & Illuminated] pipe Towers Tee Towers and Bridge Tee Towers gambrinus Towers Roma Towers napoli Towers Torino Collar Towers Torino Beam Towers 3" Od draft arms 4" Od draft arms spacesaver dispensing heads Wall Mount dispensing heads

Form No. 050196K Rev. 09.09.09



Model Nos. stainless steel 66500-1B 66500-2B 66500-3B Polished Chrome 66500-1BPC 66500-2BPC 66500-3BPC Tarnish Free Brass (PVd) 66500-1BTF 66500-2BTF 66500-3BTFNUMBER OF FAUCETS 1 2 3 OPTIONS AND ACCESSORIES • Matching Drainers • Faucet Locks

Sizes and Specifications Winged Towers & Winged Towers with Illuminated Medallions

Job ___________________________Area __________________________Item No. _______________________Model No. _____________________

4 1/16”[103]

6 1/16”[154]

10 3/8”[263]

4 5/16”[109]

9 11/16”[246]

6 1/16”[154]

6 7/8”[175]

3 5/8”[92]

10 3/8”[263]

6 1/16”[154]

12 3/4”[325]

16 9/16”[421]

“H”

4 1/2” MAX.[114]

2 9/16”[64]

3 1/2”[89]

(1) 2 1/2” [64] DIAMETER AND(3) 5/16” DIAMETER HOLES

REQUIRED IN COUNTERTOP

INSULATEDRESTRICTORSENGINEERED

TO SITEREQUIREMENTS

2 13/16”[71]

9 11/16”[246]

2 1/2”[63.5]HOLE

DRIP LINE

FAUCET HANDLESNOT FURNISHED

MEDALLION3 3/8”

OUTSIDEDIAMETER

DRIP LINE

4 1/2”[114]

13/64”[5]

MEDALLION3 3/8”

OUTSIDEDIAMETER

MEDALLION3 3/8”

OUTSIDEDIAMETER

MEDALLION3 3/8”

OUTSIDEDIAMETER

Model Nos. stainless steel 66500-1BiM 66500-2BiM 66500-3BiM Polished Chrome 66500-1BPCiM 66500-2BPCiM 66500-3BPCiM

Tarnish Free Brass (PVd) 66500-1BTFiM 66500-2BTFiM 66500-3BTFiMNUMBER OF FAUCETS and ILLUMINATED MEDALLIONS 1 2 3 DIMENSION “H” Inches (mm) 207⁄8" (530) 201⁄16" (510) 223⁄4" (578)NUMBER OF ELECTRICAL TRANSFORMERS* 1 1 1OPTIONS AND ACCESSORIES • Matching Drainers • Faucet Locks

WiNged ToWers

WiNged ToWers with illuMiNaTed MedallioNs with ChroMe TriM

* INPUT: 120V 60 Hz 0.01A OUTPUT: 12V DC 5W MAX.

Model Nos. stainless steel 66500-4B 66500-5B 66500-6B 66500-s8B Polished Chrome 66500-4BPC 66500-5BPC 66500-6BPC 66500-s8BPC Tarnish-Free Brass (PVd) 66500-4BTF 66500-5BTF 66500-6BTF 66500-s8BTFNUMBER OF FAUCETS 4 5 6 8TEE LENGTH INCHES (mm) 123⁄4” (324) 153⁄4” (400) 183⁄4” (476) 243⁄4” (629) FAUCET CENTERS INCHES (mm) 3” (76) 3” (76) 3” (76) 3” (76) OPTIONS AND ACCESSORIES • Matching drainers • Faucet locks

Form No. 050196LRev. 09.09.09


Sizes and Specifications Winged Tee-Towers Winged Tee-Towers with Illuminated Medallions



WiNged Tee-ToWers

Model Nos. stainless steel 66500-4BiM 66500-5BiM 66500-6BiM 66500-s8BiM Polished Chrome 66500-4BPCiM 66500-5BPCiM 66500-6BPCiM 66500-s8BPCiM Tarnish-Free Brass (PVd) 66500-4BTFiM 66500-5BTFiM 66500-6BTFiM 66500-s8BTFiMNUMBER OF FAUCETS and ILLUMINATED MEDALLIONS

4 5 6 8

TEE LENGTH INCHES (mm) 123⁄4” (324) 153⁄4” (400) 183⁄4” (476) 243⁄4” (629) FAUCET CENTERS INCHES (mm) 3” (76) 3” (76) 3” (76) 3” (76) NUMBER OF ELECTRICAL TRANSFORMERS* 2 3 2 4 OPTIONS AND ACCESSORIES • Matching drainers • Faucet locks

WiNged Tee-ToWers with illuMiNaTed MedallioNs with ChroMe TriM

* INPUT: 120V 60 Hz 0.01A — OUTPUT: 12V DC 5W MAX.

13”[330]

3”[76]

16 1/2”[419]

6 1/16”[154]

1 3/32”[28]

22 1/4”[585]


3 5/16”[83]

5 9/16”[141] INSULATED

RESTRICTORSENGINEERED

TO SITEREQUIREMENTS

2 19/32”[66]

2 31/32”[76]

TEE LENGTH

4 1/16”[103]

4 1/2” MAX.[114]

4 1/16”[103]

MEDALLION3 3/8”

OUTSIDEDIAMETER

(1) 2 1/2” [64] DIAMETER AND(3) 5/16” [8] DIAMETERHOLES REQUIRED IN

COUNTERTOP

Model Nos. stainless steel 66500-8B 66500-10B 66500-12B Polished Chrome 66500-8BPC 66500-10BPC 66500-12BPC Tarnish-Free Brass (PVd) 66500-8BTF 66500-10BTF 66500-12BTFNUMBER OF FAUCETS 8 10 12TEE LENGTH INCHES (mm) 325⁄8” (829) 303⁄4” (781) 363⁄4” (934) FAUCET CENTERS INCHES (mm) 41⁄8” (105) 3” (76) 3” (76) OPTIONS AND ACCESSORIES • Matching drainers • Faucet locks

Form No. 050196MRev. 09.09.09


Sizes and Specifications Winged Bridge Towers & Winged Bridge Towers with Illuminatied Medallions



6 1/16”[154] 1 3/32”

[28]

3 5/16”[83]

5 9/16”[141]

2 17/32”[64]

2 31/32”[77]

TEE LENGTH

4 1/16”[103]

16 1/2”[419]

(2) 2 1/2” [64] DIAMETER AND(6) 5/16” [8] DIAMETERHOLES REQUIRED IN

COUNTERTOP

4 1/16”[103]

FAUCETCENTERS FAUCET HANDLES

NOT FURNISHED

4 1/2” MAX.[114]


TO SITEREQUIREMENTS

16 1/2”[419]

13”[330]

22 1/4”[565]

MEDALLION3 3/8”

OUTSIDEDIAMETER

WiNged Bridge ToWers

Model Nos. stainless steel 66500-8BiM 66500-10BiM 66500-12BiM Polished Chrome 66500-8BPCiM 66500-10BPCiM 66500-12BPCiM Tarnish-Free Brass (PVd) 66500-8BTFiM 66500-10BTFiM 66500-12BTFiMNUMBER OF FAUCETS andILLUMINATED MEDALLIONS 8 10 12

TEE LENGTH INCHES (mm) 325⁄8” (829) 303⁄4” (781) 363⁄4” (934) FAUCET CENTERS INCHES (mm) 41⁄8” (105) 3” (76) 3” (76) NUMBER OF ELECTRICAL TRANSFORMERS* 3 4 4 OPTIONS AND ACCESSORIES • Matching drainers • Faucet locks

WiNged Bridge ToWers with illuMiNaTed MedallioNs with ChroMe TriM

* INPUT: 120V 60 Hz 0.01A — OUTPUT: 12V DC 5W MAX.

Model Nos. Polished Chrome 4045-3BIM Gold Tone 4045Gd-3BIMNUMBER OF FAUCETS 3 NUMBER OF ELECTRICAL TRANSFORMERS* 1FAUCET CENTERS Inches [mm] 31⁄16" (78)OPTIONS AND ACCESSORIES • Matching drainers • Faucet locks

Form No. 050196SRev. 06.14.09


Sizes and Specifications Sexy Illuminated Towers



17 7/16”[443]

12 11/16”[323]

20 3/32”[510]

21 13/16”[554]

14 13/32”[366]

4 9/32”[109]3 1/16”

[78]3 1/16”

[78]

5 11/16”[145]

FAUCET HANDLESFURNISHED WITH

ILLUMINATED MODELS.

4 1/2”[114] 2 1/2” [63.5] HOLE

REQUIRED INCOUNTERTOP


TO SITEREQUIREMENTS

MEDALLION 3 3/8”OUTSIDE DIAMETER

Model Nos. Polished Chrome 4046-3BIM NUMBER OF FAUCETS 3 NUMBER OF ELECTRICAL TRANSFORMERS* 1FAUCET CENTERS Inches [mm] 31⁄16" (78)OPTIONS AND ACCESSORIES • Matching drainers • Faucet locks

* Input: 120V-60 Hz 0.01A — Output: 12V DC 5W Maximum


sexy Towers with IlluMINaTed MedallIoNs

ICed sexy Tower with IlluMINaTed MedallIoNs with ChroMe TrIM

Model Nos. Polished Chrome 4041-1B 4041-2B 4041-3B Tarnish Free Gold (PVd) 4041Gd-1B 4041Gd-2B 4041Gd-3B Polished Chrome (Iced)* 4042-1B 4042-2B 4042-3BNUMBER OF FAUCETS 1 2 3OPTIONS AND ACCESSORIES • Matching drainers • Faucet locks

Form No. 050196NRev. 06.30.09


Sizes and Specifications Lucky Towers



* To build a layer of ice on exterior of tower, an additional Power Pak is required.

2 7/16”[62]

14 1/2”[368]

1 1/2” [38] HOLEREQUIRED INCOUNTERTOP

NOTE: HOLE IS NOTCENTERED ON TOWER

3 15/16”[99]

7”[178]

4 3/8”[110]

6 1/2”[166]

3 7/8”[99]

DRIP LINE

7 1/2”[191]

1”[25]

3 7/8”[99]

3 7/8”[99]

DRIP LINE

1 1/2” [38]HOLE

7”[178]

3 7/8”[99]


3 1/2”[89] MAX.


TO SITEREQUIREMENTS

1 11/16”[42]

1”[25]

12 15/16”[329]

Model Nos. Polished Chrome 4043-3B 4043-4B Tarnish Free Gold (PVd) 4043Gd-3B 4043Gd-4B Polished Chrome (Iced)* 4044-3B 4044-4BNUMBER OF FAUCETS 3 4OPTIONS AND ACCESSORIES • Matching drainers • Faucet locks

Form No. 050196PRev. 06.30.09


Sizes and Specifications Panther Towers



* To build a layer of ice on exterior of tower, an additional Power Pak is required.

3 7/16”[87]

13 1/16”[332]

1 3/8”[34]

2” [51] HOLEREQUIRED INCOUNTERTOP


TO SITEREQUIREMENTS


3 1/2”[89] MAX.

15 3/4”[400]

3 5/8”[93]

DRIP LINE

3 7/16”[88]

8 3/8”[213]

3 7/16”[87]

2” [51] HOLE

DRIP LINE

6 9/16”[167]

8 3/8”[213]

9 5/8”[244]

6 9/16”[167]

8 5/8”[219]

3 15/16”[99]

3 5/8”[92]

Model Nos. stainless steel 4007-4B 4007-5B 4007-6B Polished Chrome 4007-4BPC 4007-5BPC 4007-6BPC Tarnish Free Brass (PVd) 4007-4BTF 4007-5BTF 4007-6BTFNUMBER OF FAUCETS 4 5 6“A” FAUCET CENTERS Inches (mm) 5" (127) 33⁄4" (95) 3" (76)OPTIONS AND ACCESSORIES • Matching drainers • Faucet locks

Form No. 050196RRev. 09.09.09


Sizes and Specifications Seven Towers - Standard & Illuminated



24” [610]

16 1/2”[419]

22 5/8”[576]

2 3/8”[59]

4 7/8”[125]

12 1/8” [309]

2” [52]“A”

4 1/2” MAX.[114]

(1) 2 1/2” [64] DIAMETER AND(4) 5/16” DIAMETER HOLES

REQUIRED IN COUNTERTOP

FAUCET HANDLESFURNISHED WITH

ILLUMINATED MODELS.NOT FURNISHED WITH

NON-ILLUMINATED MODELS.

8 3/8”[163]

13” [329]

2 1/2” [65]

4 1/2” [114]MAX.

5 7/8”[148]


TO SITEREQUIREMENTS

3 5/8” [91]

MEDALLION 3 3/8”OUTSIDE DIAMETER

Model Nos. stainless steel 4007-4BIM 4007-5BIM 4007-6BIM Polished Chrome 4007-4BPCIM 4007-5BPCIM 4007-6BPCIM Tarnish Free Brass (PVd) 4007-4BTFIM 4007-5BTFIM 4007-6BTFIMNUMBER OF FAUCETS 4 5 6NUMBER OF ELECTRICAL TRANSFORMERS* 2 3 2“A” FAUCET CENTERS Inches (mm) 5" (127) 33⁄4" (95) 3" (76)OPTIONS AND ACCESSORIES • Matching drainers • Faucet locks


seVeN Towers

seVeN Towers with IlluMINaTed MedallIoNs with ChroMe TrIM

Form No. 050196CRev. 04.25.09



PiPe tower Polished Chrome 4008-6B 4008-8B 4009-10B 4009-12BModel Nos. tarnish-Free Brass 4008-6BtF 4008-8BtF 4009-10BtF 4009-12BtFNUMBER OF FAUCETS 6 8 10 12“A” DIMENSIONS (mm) 4” (102) 31⁄4” (83) 31⁄4” (83) 3” (76) LENGTH 38” (965) 38” (965) 42” (1067) 42” (1067)HEIGHT 14” (356) 14” (356) 14” (356) 14” (356)OPTIONS AND ACCESSORIES • Matching drainers • Faucet locks

Sizes and Specifications Pipe Towers and Spacesavers


34” [864] FOR 6 THRU 9 FAUCET 4008 SERIES MODELS42” [1067] FOR 10 THRU 12 FAUCET 4009 SERIES MODELS

38” [864] FOR 6 THRU 9 FAUCET 4008 SERIES MODELS46” [10168] FOR 10 THRU 12 FAUCET 4009 SERIES MODELS

10 3/8”[264]

2 1/4” [57]

6” [152] DIA. FLANGES

14”[356]

“A”

NsF Approved Pipe towers.Add the suffix letter “N” to part number.

Form No. 050196BRev. 09.09.09



TEE TOWER Stainless Steel 4006-2B 4006-3B 4006-4B 4006-5B 4006-6B 4006-7B 4006S8BMOdEl NOS. Polished Chrome 4006-2BPC 4006-3BPC 4006-4BPC 4006-5BPC 4006-6BPC 4006-7BPC 4006S8BPC Tarnish-Free Brass 4006-2BTF 4006-3BTF 4006-4BTF 4006-5BTF 4006-6BTF 4006-7BTF 4006S8BTFNUMBER OF FAUCETS 2 3 4 5 6 7 8TEE LENGTH (mm) 91⁄8” (232) 91⁄8” (232) 117⁄8” (302) 145⁄8” (372) 173⁄8” (441) 201⁄8” (511) 227⁄8” (581)FAUCET CENTERS (mm) 51⁄2” (140) 23⁄4” (70) 23⁄4” (70) 23⁄4” (70) 23⁄4” (70) 23⁄4” (70) 23⁄4” (70) OPTIONS ANd ACCESSORIES • Matching drainers • Faucet locks • Extra high models

Sizes and Specifications Tee Towers and Bridge Tee Towers


BRIdGE TOWER Stainless Steel 4006-8B 4006-10B 4006-12B 4006-16B 4006-20BMOdEl NOS. Polished Chrome 4006-8BPC 4006-10BPC 4006-12BPC 4006-16BPC 4006-20BPC Tarnish-Free Brass 4006-8BTF 4006-10BTF 4006-12BTF 4006-16BTF 4006-20BTFNUMBER OF FAUCETS 8 10 12 16 20TEE LENGTH (mm) 331⁄8” (841) 331⁄8” (841) 331⁄8” (841) 441⁄8” (1121) 551⁄8” (1400)FAUCET CENTERS (mm) 41⁄8” (105) 3” (76) 23⁄4” (70) 23⁄4” (70) 23⁄4” (70) dIMENSION “A” 161⁄2” (419) 22” (559) 271⁄2” (699) OPTIONS ANd ACCESSORIES • Matching drainers • Faucet locks • Extra high models

6 7/16”[163]

4 5/8”[117]

2 7/16”[62]

9 1/2”[241]

7/8”[22]

6”[152]



TO SITEREQUIREMENTS

TEE LENGTHFAUCET

CENTERS

1 13/16”[48]

FAUCETHANDLESNOTFURNISHED

9 1/2”[241]

12 15/16”[329]

4 5/8”[117]

7 5/8”[194]*

6” [152]

9” [194]*

3 7/16”[87]

* DIMENSIONS APPLICABLEFOR 4006S8B

ONLY!

BRIDGE LENGTH

3 7/16”[87]

9 1/2”[241]

4 5/8”[117]

6”[152]

“A”

12 15/16”[329]

FAUCETCENTERS


NSF Approved Tee Towersand Bridge Towers.Add the suffix letter “N” to part number.

Form No. 050196DRev. 06.05.09



Model Nos. satin Chrome 4005-3B 4005-4B 4005-5B 4005-6B 4005d3B 4005d4B Polished Chrome 4005-3BPC 4005-4BPC 4005-5BPC 4005-6BPC 4005d3BPC 4005d4BPC Tarnish-Free Brass 4005-3BTF 4005-4BTF 4005-5BTF 4005-6BTF 4005d3BTF 4005d4BTFNUMBER OF FAUCETS 3 4 5 6 3/3 4/4“A” DIMENSIONS (mm) 73⁄4” (197) 11” (279) 137⁄8” (352) 155⁄8” (397) 73⁄4” (197) 11” (279)OPTIONS AND ACCESSORIES • Matching drainers • Faucet locks

Sizes and Specifications Gambrinus Towers


9 3/8”[237]

3 1/4”[82]

3 3/4”[95]

4 7/8”[124]

8”[203]

3” [76] DIA.HOLE

REQUIREDIN COUNTERTOP


TO SITEREQUIREMENTS

19 3/8”[492]

9 7/16”[240]


“A”

3 3/16”[81]

4 1/4”[108]

12 1/4”[311] DIA.

4 1/4”[108]

3 3/16”[81]

12 1/4”[311] DIA.

4 1/4”[108]

4 1/4”[108]

Form No. 050196ERev. 04.25.09



Sizes and Specifications Roma Towers


ROMA Black 4056BK3B 4056BK4B 4056BK5BMODELNOS. White 4056WH3B 4056WH4B 4056WH5BGOLDFINISH Blue 4056BL3B 4056BL4B 4056BL5B Green 4056GR3B 4056GR4B 4056GR5BNUMBER OF FAUCETS 3 4 5OPTIONS ANd ACCESSORIES • To order with polished chrome finish, use suffix PC (i.e., 4056WH4BPC). • Matching drainers • Faucet locks

3 7/8”[99]

MOUNTINGCENTERS

13”[330]

FAUCETHANDLES NOT

FURNISHED

3 1/2” TYP.[89]

“DRIP LINE”

8 1/8” DIA.[206]

INSULATEDRESTRICTORS

ENGINEERED TOSITE REQUIREMENTS 3 3/8”

[86]“DRIP LINE”

3” [76] DIA.HOLE REQUIREDIN COUNTERTOP

20 1/2”[521]

Form No. 050196FRev. 04.25.09



Sizes and Specifications Napoli Towers


Napoli 4053pC2B 4053GD2BMoDElNoS.NUMBER OF FAUCETS 2 2Color/FINISH Polished Chrome GoldOPTIONs and ACCESSORIES • Matching drainers • Faucet locks

5 1/2” DIA.[139]


TO SITEREQUIREMENTS

3 3/8” [86]“DRIP LINE”

2 1/2” [159] DIA.HOLE REQUIREDIN COUNTERTOP

FAUCETHANDLES

NOTFURNISHED

3 3/16”[81]

MOUNTINGCENTERS

6 13/16”[174]

19 1/4”[489]

12 3/4”[324]

“DRIP LINE”

Form No. 050196IRev. 04.25.09



Sizes and Specifications Torino Collar Towers


torino White 4054WH1B 4054WH2B 4054WH3Bcollarstyle Blue 4054Bl1B 4054Bl2B 4054Bl3BMoDelnos. Green 4054Gr1B 4054Gr2B 4054Gr3BNUMBER OF FAUCETS 1 2 3OPTIONS ANd ACCESSORIES • Matching drainers • Faucet locks

3 13/16”[143]

MOUNTINGCENTERS

5 5/8”[143]

16 5/8”[422]

26 7/8”[683]

“DRIP LINE”

3” [76] DIA.HOLE REQUIREDIN COUNTERTOP

2 1/2” [64] “DRIP LINE”

9 7/8” [251]


TO SITEREQUIREMENTS

FAUCETHANDLES

NOTFURNISHED

Form No. 050196HRev. 04.25.09



TORINO White 4055WH3B 4055WH4B 4055WH5B 4055WH6B 4055WH7BBEAMSTYLE Blue 4055BL3B 4055BL4B 4055BL5B 4055BL6B 4055BL7BMODELNOS. Green 4055GR3B 4055GR4B 4055GR5B 4055GR6B 4055GR7B

NUMBER OF FAUCETS 3 4 5 6 7

OPTIONS ANd ACCESSORIES • Matching drainers • Faucet locks

Sizes and Specifications Torino Beam Towers


26”[660]

9 7/8”[251]

2 3/4”[70] TYP.


26 7/8”[683]

16 5/8”[422]

3” [76] DIA.HOLE REQUIREDIN COUNTERTOPINSULATED

RESTRICTORSENGINEERED

TO SITEREQUIREMENTS

2 1/2”[64]

“DRIP LINE”

3 13/16”[96]

MOUNTINGCENTERS

Model Nos. Polished Chrome 4010 4016 4026 Tarnish-Free Brass (PVd) 4010TF 4016TF 4026TFNUMBER OF FAUCETS 1 2 3“A” DIMENSIONS (mm) 97⁄16” (240) 97⁄16” (240) 97⁄16” (240) “B” DIMENSIONS (mm) 1211⁄16” (322) 1211⁄16” (322) 1311⁄16” (348) OPTIONS AND ACCESSORIES • Matching drainers • Faucet locks • Extra high models

Form No. 050196ARev. 06.05.09


Sizes and Specifications 3"OD Draft Arms



2 3/4”[70]

2 1/2”[64]

4 1/2”[103]

3” O.D.[77]

4 1/2” O.D.[114]

2 3/4”[70]

6 5/8”[168]

DRIP LINE

DRIP LINE

4 3/4”[120]

3 9/16”[91]

5 7/16”[138]

6 5/8”[168]

4 3/4”[120]

5 7/16”[138]




TO SITEREQUIREMENTS

“A” “A”

“B” “B”

4 1/2” O.D.[114]

4 1/2” O.D.[114]

1 1/2”[38]

3” O.D.[76]

3” O.D.[76]



4010 & 4016 4026

Model Nos. Polished Chrome 4028 4029 Tarnish Free Brass (PVd) 4028TF 4029TFNUMBER OF FAUCETS 3 4OPTIONS AND ACCESSORIES • Matching drainers • Faucet locks

Form No. 050196QRev. 04.25.09


Sizes and Specifications 4"OD Draft Arms



6”[152] O.D.

Form No. 050196TRev. 04.25.09



Sizes and Specifications Spacesavers Dispensing Heads


SPACESAVER Stainless4040A2B4040A3B 4040A4B 4060A2B 4060A3B 4060A4B 4060A5B 4060A6B 4060A7BMODELNOS. Steel

NUMBER OF FAUCETS 2 3 4 2 3 4 5 6 7

LENGTH (mm) 14” (356) 14” (356) 14” (356) 221⁄4” (565) 221⁄4” (565) 221⁄4” (565) 221⁄4” (565) 221⁄4” (565) 221⁄4” (565)

FACE LENGTH (mm) 13” (330) 13” (330) 13” (330) 211⁄8” (537) 211⁄8” (537) 211⁄8” (537) 211⁄8” (537) 211⁄8” (537) 211⁄8” (537)

FAUCET CENTERS (mm) 81⁄4” (210) 41⁄8” (105) 23⁄4” (70) 161⁄2” (419) 81⁄4” (210) 51⁄2” (140) 41⁄8” (105) 23⁄4” (70) 33⁄4 (70)

OPTIONS and • Underbar drainers • Console drainer assembly • Faucet locksACCESSORIES • Faucet Handles • Optional leads out bottom


2 5/8”[67]

3 1/2”[89]

5 3/4”[166]

OVERALLLENGTH

FAUCETCENTERS

DISPENSING HEADFACE LENGTH

3 3/8”[86]

4 5/8”[117]

FAUCETCENTERS

Form No. 050196J Rev. 04.25.09



Model Nos. stainless steel 4070A2B 4070A4B 4075A6B 4075A8BNUMBER OF FAUCETS 2 4 6 8 LENGTH INCHES (mm) 121⁄4” (312) 121⁄4” (312) 23” (584) 23” (584) HEIGHT INCHES (mm) 173⁄4” (451) 173⁄4” (451) 173⁄4” (451) 173⁄4” (451)

Sizes and Specifications Wall Mount Dispensing Heads


A

NOTE: 4070A2B HAS “B”FAUCET LOCATIONS PLUGGED.

4075A6B HAS “A”FAUCET LOCATIONS PLUGGED.

B B A

17 3/4”[451]

12”[305]

FAUCETHANDLES

NOTFURNISHED


TO SITEREQUIRMENTS

3 1/8”[79]

2 5/8”[67]

11 1/2”[292]

1/2” VINYL TUBING “BY OTHERS”

6”[152]

6 1/4”MTG. CTR’S

14 3/8”[365]

12 1/4” [312] WIDE F /NO. 4040A2B AND 4070A4B HEADS

23” [584] WIDE F/NO. 4075A6B AND 4075A8B HEADS

WALL

4 1/2”[114]

dispensing heads - Perlick Corporation heads perlick Features • Pure copper coolant lines and cold...

Documents

Transcript of dispensing heads - Perlick Corporation heads perlick Features • Pure copper coolant lines and cold...