CONCRETE ACCESSORIES Sika® Greenstreak WATERSTOPS

CONCRETE ACCESSORIESSika® Greenstreak WATERSTOPS

2Sika® Greenstreak WATERSTOPS Concrete Accessories

Sika® Greenstreak WATERSTOPS

Offering a variety of solutions across all categories of waterstops, Sika has the knowledge and time tested products to meet the most demanding applications.

Water/Waste Water Treatment Plants Lock and Dam Systems Reservoirs and Aqueducts Flood Walls Retaining Walls Foundations Tunnels and Culverts Bridge Abutments Containment Structures and Tanks Slabs-on-Ground

When you specify Sika, you are specifying THE first name in waterstops and the trusted source for superior technical and customer service.

3Sika® Greenstreak WATERSTOPS

Concrete Accessories

CHOOSING THE RIGHT WATERSTOP

WATERSTOP BASIC USE

Embedded in concrete, across and/or along the joint, waterstops form a watertight diaphragm that prevents the passage of liquid through the joint. Sika® Greenstreak Waterstops are precision engineered for vertical and horizontal expansion joints between cast-in-place concrete units where conditions may subject the concrete to hydro-static pressure or moisture seepage. They are manufactured with the highest quality PVC to provide the strongest tensile strength and elongation capabilities possible with a superior resistance to alkalis, acids, ozone and waterborne chemicals.

Sika®’s complete line of shapes and sizes assures a long, lasting, watertight seal for every above or below grade concrete structure.They do not discolour concrete, nor do they produce or support electrolytic action with metal structures nearby or with embedded rebar steel.

Sika® Greenstreak Waterstops maintain their integrity indefinitely. They are the premium choice for strength, impermeability and elongation.

SUGGESTED WATERSTOP DESIGN CHECKLIST

Verify chemical containment requirements, if any Verify hydrostatic head pressure requirements Determine joint type and joint movement requirements Specify material type for best water sealing performance Specify profile and size (by product number, if possible) Verify joinery details of dissimilar or asymmetric waterstop

profiles, if any (consider using one profile throughout to simplify intersections)

Specify factory fabrications and fittings for transitions and intersections

Specify appropriate method for securing waterstop in position (see Sika® Greenstreak CSI-formatted product specifications for additional guidance)

Photo courtesy of Paul C. Rizzo Associates, Inc.

4Sika® Greenstreak WATERSTOPSConcrete Accessories

MOVEMENT JOINTS SELECTING A WATERSTOP SHAPE

MOVEMENT JOINTS are typically designed to accommodate significant movement due to drying shrinkage, temperature changes, settlement, creep, or live load deflections. The waterstop profile selected must have the ability to accommodate expected joint movement, typically achieved through the use of a centerbulb, tear web, or other suitable waterstop geometry designed to accommodate joint movement. Movement joints typically include contraction joints, expansion joints, and isolation joints. The following profiles are suitable for movement joints:

Ribbed with Centerbulb shapes are the most versatile type of waterstops available. The centerbulb accommodates lateral, transverse, and shear movement. Larger centerbulbs will accommodate greater movement.

Tear Web shapes accommodate large movements. When joint movement occurs, the tear web ruptures and allows the U-bulb to deform without placing the material in tension.

PRODUCT AND MATERIAL OPTIONS

Sika has the industry's most comprehensive collection of waterstop products and solutions to meet the most demanding applications. This catalogue is primarily dedicated to PVC (polyvinyl chloride) waterstops, but general information is included for chemical resistant waterstops (TPE-R, PE, Stainless Steel), strip-applied waterstops (Hydrotite, SikaSwell®-A, Sika® Swellstop®, Lockstop) and for SikaFuko® Injection Hose Systems. Complete catalogues and technical data for each of these products are available in print or online.

Dumbbell with Centerbulb shapes accommodate lateral, transverse, and shear movement. Larger centerbulbs will accommodate greater movement. Consider using Ribbed with Centerbulb for better sealing characteristics.

Base Seal with Tear Web shapes accommodate lateral, transverse, and shear movement. Larger tear web bulbs will accommodate greater movement. Base Seal waterstops have some limitations with transitions and intersections.



NONMOVING JOINTS typically have 100% of the bonded steel reinforcement continuous through the joint, and expose the waterstop to negligible or no movement. Flat waterstop profiles without a centerbulb or tear web are suitable for nonmoving joints. Other waterstop materials may be considered for nonmoving joints as well, such as strip-applied or injectable hose waterstops. Examples of waterstop profiles suitable for nonmoving joints are as follows:

Split Flange shapes can simplify forming. The split flange is opened and attached to the bulkhead for placement of the first concrete element. After stripping the bulkhead, the flange is closed and anchored for placement of the adjoining element. Split waterstops are suitable for straight runs only. Transitions and intersections are not practical with these profiles.

Waterstops for Retrofit Applications seal joints where new construction meets an existing structure and can be suitable for moving joints. Systems include stainless steel batten bars and fasteners for anchoring to the existing structure with the aid of an epoxy gel.

Strip-applied Waterstops are adhered along concrete joints or penetrations and encapsulated by a subsequent concrete placement. Hydrotite is the state of the art for hydrophilic waterstop and is a high-performance, chloroprene rubber material that expands when exposed to moisture to create a compression seal within and along the joint. For less critical applications, Sika also offers SikaSwell®-A and Sika® Swellstop® expanding waterstops.

Flat Ribbed shapes are preferred for nonmoving joints and provide the best sealing characteristics.

Dumbbell shapes are an alternate profile for nonmoving joints. Consider ribbed shapes for better sealing characteristics.

Base Seal is ideal for slab-on-grade joints or backfilled walls and are easy to form. Base Seal waterstops have some limitations with transitions and intersections.

Labyrinth is primarily used in vertical joints. Labyrinth shapes create a keyed joint and do not require split bulkheads. Labyrinth can be difficult to use in horizontal joints and there are some limitations with transitions and intersections.

NONMOVING JOINTSSELECTING A WATERSTOP SHAPE

New Concrete

Existing Concrete


Sika® Greenstreak PVC WATERSTOPS

Sika® Greenstreak, one of the first manufacturers of polyvinyl chloride (PVC) waterstop, has formulated, compounded and manufactured PVC waterstop for years. Sika® has the knowledge, experience and desire to provide the highest quality joint sealing solutions and services available.

PVC is the industry standard for flexible waterstops, which are typically embedded across and along the joint. PVC is the most versatile waterstop material, offering the broadest design selection and is accepted under the ACI 350 "Code Requirements for Environmental Engineering Concrete Structures". It has great inherent elasticity and is resistant to many waterborne chemicals. It will not discolour concrete or produce electrolytic action.

Sika® offers the industry's widest array of PVC waterstop designs, typically ranging in widths from 100 to 300 mm (4 to 12 in) and thicknesses from 3 to 12 mm (1/8 to 1/2 in). Depending on size, most waterstop shapes are provided in 15 or 30 m (50 or 100 ft) coils. Please contact Sika Canada Inc. for further information or if you need assistance in selecting a waterstop.

All Sika® Greenstreak PVC waterstops are specially formulated and manufactured to meet or exceed industry standard product specifications.

Sika® Greenstreak PVC Waterstops

Property Test Value

Water absorption ASTM D570 0.15% max.

Tear resistance ASTM D624 300 lb/in min.

Ultimate elongation ASTM D638 350% min.

Tensile strength ASTM D638 2000 psi min.

Low temperature brittleness

ASTM D746Passes @ -35°F / -37°C

Stiffness in flexure ASTM D747 700 psi min.

Specific gravity ASTM D792 1.38 max.

Hardness Shore A15 ASTM D2240 79±3

Accelerated extraction-Tensile strength

Corps of Engineers

CRD-C 572

1600 psi min.-Elongation 300% min.Effect of Alkali-Weight change +0.25% -0.10%-Hardness change +/-5 points

PHYSICAL PROPERTIES SIKA CONDUCTS REGULAR TESTING OF MATERIALS.

Independent laboratory tests are available for the following applicable standards:

Corps of Engineers CRD-C 572-74

Bureau of Reclamation

CH2M HILL

MWH

Various State Highway and/or Public Works Department Standards

Test results conducted using British Standards are also available. Consult a Sika Canada representative for more information.



PVC waterstops must be securely positioned in the forms to prevent deflection or misalignment during concrete placement. This is achieved by tying off the outer edge of the waterstop to adjacent reinforcing steel. Sika offers options to properly anchor PVC waterstop, including:

PUNCHED FLANGES - most ribbed shapes can be provided with punched flanges

GROMMETS - select shapes can be provided with brass grommets

HOG RINGS AND PLIERS - available for field application and suitable for most shapes

Virtually every concrete structure requiring a PVC waterstop is going to encounter a joint that will change direction or intersect with another joint. One of the benefits PVC offers is the ability to heat weld the material to create a continuous sealing diaphragm within the joints of a concrete structure.

Waterstop failures are often the result of improper field fabricated transitions and intersections. To avoid potential problems, Sika strongly recommends FACTORY FABRICATIONS and maintains an inventory of the most common fabrications to meet the demands of a construction schedule.

SPLICING IRONS are available in various sizes for field welding lengths of PVC waterstop. More information can be found on page 18.

INSTALLATION AIDS AND FABRICATIONS

Hog Rings and Pliers

Splicing Irons

Factory Fabrications


DESIGN AND SIZES

SHAPES ARE DRAWN TO VARYING SCALES

RIBBED CENTER BULB

NO. STD. WT. HEAD PRESS.

643 0.58 lb/ft (0.86 kg/m) 50' (149 KPa)

100.0mm

5.0mm 10.0mm

4.0mm ID & 10.0mm OD Ontario Hydro

644 1.37 lb/ft (2.04 kg/m) 100' (299 KPa)

150.0mm

16.0mm

8.0mm 5.0mm ID & 16.0mm OD Ontario Hydro

645 2.13 lb/ft (3.17 kg/m) 150' (448 KPa)

10.0mm18.0mm 6.5mm ID & 18.0mm ODOntario

Hydro

200.0mm

647 0.92 lb/ft (1.37 kg/m) 100' (299 KPa)

3/16" 4.8mm

1/8" 3.2mm

6"152.4mm

5/16” ID & 9/16" OD 7.9mm ID & 14.3mm OD

New York A

649 1.28 lb/ft (1.90 kg/m) 100' (299 KPa)

7"177.8mm

1/4" 6.4mm

1/8" 3.2mm

5/8” ID & 1" OD 15.9mm ID & 25.4mm OD

New York B

696 2.65 lb/ft (3.94 kg/m) 175' (523 KPa)

9"228.8mm

3/16" 4.8mm

3/8" 9.5mm

7/8” ID & 1 1/2" OD 22.2mm ID & 38.1mm OD 1/4"

6.4mm

USBRC.O.E.

701 0.42 lb/ft (0.63 kg/m) 65' (194 KPa)

4"101.6mm

3/16" 4.8mm

3/16” ID & 3/8" OD 4.8mm ID & 9.5mm OD


702 0.74 lb/ft (1.10 kg/m) 65' (194 KPa)

1/4” ID & 3/4" OD 6.4mm ID & 19.1mm OD

CH2M HILL

4"101.6mm

1/8"3.2mm

3/16" 4.8mm

703 0.73 lb/ft (1.09 kg/m) 100' (299 KPa)

6"152.4mm

3/16" 4.8mm

1/8" 3.2mm

1/8" 3.2mm

1/4” ID & 5/8" OD 6.4mm ID & 15.9mm OD

704 .98 lb/ft (1.46 kg/m) 100' (299 KPa)

6"152.4mm

3/16"4.8mm

1/4" 6.4mm

1/4” ID & 11/16" OD 6.4mm ID & 17.5mm OD

705 1.19 lb/ft (1.77 kg/m) 125' (373 KPa)

3/8" 9.5mm

6"152.4mm

3/16" 4.8mm

1/8" 3.2mm

1/4” ID & 11/16" OD 6.4mm ID & 17.5mm OD

USBR

706 1.90 lb/ft (2.83 kg/m) 150' (448 KPa)

6"152.4mm

3/8" 9.5mm

1/2" 12.7mm

3/4" 19.1mm

5/16” ID & 15/16" OD 7.9mm ID & 23.8mm OD

707 1.19 lb/ft (1.77 kg/m) 100' (299 KPa)

9"228.6mm

3/16" 4.8mm

1/4” ID & 1/2" OD 6.4mm ID & 12.7mm OD

708 1.45 lb/ft (2.15 kg/m) 125' (373 KPa)

9"228.6mm

1/4" 6.4mm

1/4” ID & 5/8" OD 6.4mm ID & 15.9mm OD

9” Mass.3/16" 4.8mm


709 1.63 lb/ft (2.43 kg/m) 175' (523 KPa)

9"228.6mm

3/8" 9.5mm

3/16" 4.8mm 1/8"

3.2mm

1/4” ID & 3/4" OD 6.4mm ID & 19.1mm OD

710 2.72 lb/ft (4.05 kg/m) 200' (598 KPa)

9"228.6mm

1/2" 12.7mm

3/8" 9.5mm

1" 25.4mm

1/2” ID & 1" OD 12.7mm ID & 25.4mm OD

711 1.56 lb/ft (2.32 kg/m) 150' (448 KPa)

12”304.8mm

3/16" 4.8mm

3/16” ID & 7/16" OD 4.8mm ID & 11.1mm OD

712 4.38 lb/ft (6.52 kg/m) 225' (672 KPa)

12”304.8mm

1" 25.4mm1/2"

12.7mm

1"25.4mm

1/2” ID & 1 1/4" OD 12.7mm ID & 31.8mm OD

713 3.60 lb/ft (5.36 kg/m) 225' (672 KPa)

12”304.8mm

1/2"12.7mm

3/16"4.8mm

1/4" 6.4mm

7/8” ID & 1 1/2" OD 22.2mm ID & 38.1mm OD

714 3.62 lb/ft (5.39 kg/m) 225' (672 KPa)

12" 304.8mm

1/2" 12.7mm

3/16" 4.8mm

5/8” ID & 1 1/8" OD 15.9mm ID & 28.6mm OD

3/8" 9.5mm

716 1.55 lb/ft (2.31 kg/m) 125' (373 KPa)

6"152.4mm

1/8" 3.2mm

1/4" 6.4mm

3/8" 9.5mm

1/4” ID & 5/8" OD 6.4mm ID & 15.9mm OD



DESIGN AND SIZES

745 1.79 lb/ft (2.66 kg/m) 175' (523 KPa)

9"228.6mm

9/16" 14.3mm

3/8" 9.5mm

3/16" 4.8mm

3/16” ID & 5/8" OD 4.8mm ID & 15.9mm OD

778 2.85 lb/ft (4.24 kg/m) 200' (598 KPa)

9" 228.6mm

7/8" 22.2mm

3/8" 9.5mm

1/2" 12.7mm

OntarioHydro

1/4” ID & 3/4" OD 6.4mm ID & 19.1mm OD

779 0.86 lb/ft (1.28 kg/m) 100' (299 KPa)

6"152.4mm

3/16" 4.8mm

3/16” ID & 1/2" OD 4.8mm ID & 12.7mm OD

780 0.98 lb/ft (1.46 kg/m) 100' (299 KPa)

3/4” ID & 1" OD 19.1mm ID & 25.4mm OD

6"152.4mm

3/16" 4.8mm

788 1.66 lb/ft (2.47 kg/m) 175' (523 KPa)

6" 152.4mm

13/32" 10.3mm

3/4" 19.1mm

Ontario Hydro9/32"

7.1mm3/16” ID & 5/8" OD

4.8mm ID & 15.9mm OD

827 1.63 lb/ft (2.43 kg/m) 125' (373 KPa)

6"152.4mm

3/8" 9.5mm

1/2" 12.7mm 1/8"

3.2mm

1/4” ID & 3/4" OD 6.4mm ID & 19.1mm OD


717 1.52 lb/ft (2.26 kg/m) 125' (373 KPa)

6"152.4mm

3/8" 9.5mm

1/8" 3.2mm

1/2” ID & 1" OD 12.7mm ID & 25.4mm OD

718 2.22 lb/ft (3.30 kg/m) 175' (523 KPa)

9"228.6mm

1/8" 3.2mm

3/8" 9.5mm

1/4" 6.4mm

3/4” ID & 1 1/4" OD 19.1mm ID & 31.9mm OD

719 2.05 lb/ft (3.05 kg/m) 150' (448 KPa)

1/8" 3.2mm3/8"

9.5mm1/4"

6.4mm

9"228.6mm

1 1/8” ID & 1 1/2" OD28.6mm ID & 38.1mm OD

726 3.97 lb/ft (5.91 kg/m) 200' (598 KPa)

12" 304.8mm

3/8" 9.5mm

3/4" 19.1mm

7/8" 22.2mm

1 1/4” ID & 2" OD 31.8mm ID & 50.8mm OD

731 2.00 lb/ft (2.98 kg/m) 175' (523 KPa)

9"228.6mm

3/8" 9.5mm

1/2" 12.7mm

1/4" 6.4mm

1/2” ID & 7/8" OD 12.7mm ID & 22.2mm OD

732 1.60 lb/ft (2.38 kg/m) 125' (373 KPa)

6" 152.4mm

3/8" 9.5mm

5/16” ID & 7/8" OD 7.9mm ID & 22.2mm OD

1/8" 3.2mm

CH2M HILL MWH

Black & Veatch

735 2.45 lb/ft (3.65 Kg/m) 175' (523 KPa)

9"228.6mm

3/8" 9.5mm

1/8" 3.2mm

1/2” ID & 1" OD 12.7mm ID & 25.4mm OD

CH2M HILLMWH

Black & Veatch

736 1.41 lb/ft (2.10 kg/m) 125' (373 KPa)

6"152.4mm

3/8" 9.5mm1/4"

6.4mm

1/8" 3.2mm

5/16” ID & 5/8" OD 7.9mm ID & 15.9mm OD

905 3.80 lb/ft (5.65 kg/m) 260' (776 KPa)

350.0mm

12.7mm16.0 mm ID & 28.0mm OD

12.7mm9.7mm

915 0.68 lb/ft (1.01 kg/m) 65' (194 KPa)

EYELET

150.0mm

10.0mm20.0mm

3.0mm13.0mm ID

935 1.21 lb/ft (1.80 kg/m) 125' (373 KPa)

3.5mm

3.0mm250.0mm

64.0mm

25.0mm5.0mm

18.0mm IDEYELET

951 1.06 lb/ft (1.58 kg/m) 75' (224 KPa)

150.0mm

20.0mm 3.0mm6.0mm13.0mm ID

4.0mmEYELET

952 1.32 lb/ft (1.97 kg/m) 125' (373 KPa)

200.0mm

3.0mm6.0mm 4.0mm 3.5mm

13.0mm ID

20.0mmEYELET

953 1.77 lb/ft (2.64 kg/m) 150' (448 KPa)

25.0mm55.0mm

250.0mm

4.5mm 7.0mm

50.0mm

3.5mm3.0mm17.0mm IDEYELET


738 2.73 lb/ft (4.06 kg/m) 150' (448 KPa)

7/8"22.2mm 3/8"

9.5mm

9"228.6mm

7/8” ID & 1 3/8" OD 22.2mm ID & 34.9mm OD

739 2.75 lb/ft (4.09 kg/m) 150' (448 KPa)

9"228.6mm

3/8" 9.5mm

1/8" 3.2mm

1 1/2” ID & 2" OD 38.1mm ID & 50.8mm OD

7/8" 22.2mm

EYELET


829 2.67 lb/ft (3.97 kg/m) 175' (523 KPa)

9"228.6mm

3/8" 9.5mm

1/2" 12.7mm

1/8" 3.2mm

1/4” ID & 3/4" OD 6.4mm ID & 19.1mm OD

838 1.10 lb/ft (1.64 kg/m) 150' (448 KPa)

203.0mm

5.0mm 9.5mm6.4 mm ID & 12.7mm OD

RIBBED CENTER BULB/CONT’D


DESIGN AND SIZES

RIBBED WATERSTOPS PROVIDE THE

BEST SEALING CHARACTERISTICS

RIBBED TEAR WEBNO. STD. WT. HEAD PRESS.

698 0.78 lb/ft (1.16 kg/m) 65' (194 KPa)

6"152.4mm

1/8" 3.2mm

3/8" 9.5mm

5/8" 15.9mm

3/8" 9.5mm

699 1.00 lb/ft (1.49 kg/m) 100' (299 KPa)

9"228.6mm

1/8" 3.2mm

3/8" 9.5mm

5/8" 15.9mm

3/8" 9.5mm


963 .87 lb/ft (1.30 kg/m) 100' (299 KPa)

225.0mm

3.0mm 10.0mm10.0mm ID & 16.0mm OD

964 .63 lb/ft (.94 kg/m) 50' (150 KPa)

150.0mm

3.0mm 10.0mmEYELET 10.0mm ID & 16.0mm OD

965 .77 lb/ft (1.15 kg/m) 75' (224 KPa)

10.0mm ID & 16.0mm OD

200.0mm

3.0mm 10.0mmEYELET


972 .75 lb/ft (1.12 kg/m) 100' (299 KPa)

150.0mm

2.2mm9.0mm

4.5mm

12.0mm ID & 18.0mm OD

973 1.07 lb/ft (1.59 kg/m) 100' (299 KPa)

2.2mm

4.5mm220.0mm

12.0mm ID & 18.0mm OD

992 .92 lb/ft (1.37 kg/m) 100‘ (299 KPa)

200.0mm

20.0mm 4.0mm3.0mm14.0mm ID

EYELET


700 3.78 lb/ft (5.63 kg/m) 150' (448 KPa)

9"228.6mm

3/4" 19.1mm

1 1/8"28.7mm

2 1/2"63.5mm3/8"

9.5mm

728 2.68 lb/ft (3.99 kg/m) 175' (523 KPa)

1" 25.4mm

9"228.6mm

1 1/4"31.8mm

7/16" 11.1mm

1/4" 6.4mm

1/2" 12.7mm

RIBBED CENTER BULB/CONT’D


954 3.07 lb/ft (4.56 kg/m) 200' (598 KPa)

30.0mm

55.0mm250.0mm

50.0mm

10.0mm 3.0mm18.0mm ID EYELET

961 .63 lb/ft (.94 kg/m) 50' (50 KPa)

150.0mm

3.0mm 10.0mm10.0mm ID & 16.0mm OD

962 .77 lb/ft (1.15 kg/m) 75' (224 KPa)

3.0mm

200.0mm10.0mm

10.0mm ID & 16.0mm OD



DESIGN AND SIZES

FLAT RIBBEDSHAPES ARE DRAWN TO

VARYING SCALES

825 3.22 lb/ft (4.79 kg/m) 200' (598 KPa)

9"228.6mm

1/2" 12.7mm

3/4" 19.1mm

1/16" 1.6mm

955 1.01 lb/ft (1.51 kg/m) 75' (224 KPa)

150.0mm

20.0mm

3.0mm4.0mm6.0mm EYELET

956 1.32 lb/ft (1.96 kg/m) 125' (373 KPa)

200.0mm

20.0mm

3.0mm6.0mm 4.0mmEYELET

957 1.75 lb/ft (2.60 kg/m) 150' (448 KPa)

4.5mm 7.0mm 3.0mm

250.0mm

25.0mmEYELET


580 1.71 lb/ft (2.54 kg/m) 125' (373 KPa)

6"152.4mm

1/8" 3.2mm

3/8" 9.5mm 1/2"

12.7mm

646 2.37 lb/ft (3.53 kg/m) 175' (523 KPa)

9"228.6mm

1/8" 3.2mm

3/8" 9.5mm

5/8" 15.9mm

MWHBlack & Veatch

679 1.50 lb/ft (2.23 kg/m) 125' (373 KPa)

6"152.4mm

1/8" 3.2mm 3/8"

9.5mm5/8"

15.9mm

MWH Black & Veatch

773 2.40 lb/ft (3.57 kg/m) 175' (523 KPa)

9"228.6mm

3/8" 9.5mm 1/2"

12.7mm1/8"

3.2mm

781 .43 lb/ft (.64 kg/m) 65' (194 KPa)

3/32" 2.4mm

4"101.6mm

3/16" 4.8mm

1/8" 3.2mm

782 .84 lb/ft (1.25 kg/m) 75' (224 KPa)

6"152.4mm

3/16" 4.8mm

1/8" 3.2mm

7/16" 11.1mm

783 1.39 lb/ft (2.07 kg/m) 125' (373 KPa)

6"152.4mm

3/8" 9.5mm

1/4" 6.4mm

1/8" 3.2mm


784 1.60 lb/ft (2.38 kg/m) 150' (448 KPa)

6"152.4mm

1/2" 12.7mm

3/8" 9.5mm

785 1.22 lb/ft (1.82 kg/m) 100' (299 KPa)

9"228.6mm

3/16" 4.8mm

1/8" 3.2mm

786 2.07 lb/ft (3.08 kg/m) 175' (523 KPa)

9"228.6mm

3/8" 9.5mm

1/8" 3.2mm

1/4" 6.4mm


958 2.95 lb/ft (4.39 kg/m) 200' (598 KPa)

30.0mm

250.0mm

10.0mm 3.0mmEYELET

970 1.27 lb/ft (1.89 kg/m) 125' (373 KPa)

260.0mm

19.0mm4.3mm

3.0mm20.0mm

3.5mm

975 1.07 lb/ft (1.59 kg/m) 100' (299 KPa)

250.0mm

3.0mm5.0mmEYELET

976 .97 lb/ft (1.44 kg/m) 125' (373 KPa)

205.0mm

4.5mm 10.0mm15.0mm 3.0mm

978 .72 lb/ft (1.07 kg/m) 75' (224 KPa)

150.0mm

4.5mm

3.0mm

10.0mm 15.0mmEYELET

995 .54 lb/ft (.80 kg/m) 65' (194 KPa)

150.0mm

3.0mmEYELET


DESIGN AND SIZES



640 .92 lb/ft (1.37 kg/m) 65' (194 KPa)

140.0mm

13.0mm 5.0mm 8.0mm ID & 18.0mm OD

641 1.15 lb/ft (1.71 kg/m) 100' (299 KPa)

190.0mm

13.0mm 5.0mm 8.0mm ID & 18.0mm OD

642 1.68 lb/ft (2.50 kg/m) 150' (448 KPa)

240.0mm

19.0mm 5.0mm 10mm ID & 20.0mm OD

654 0.68 lb/ft (1.01 kg/m) 65' (194 KPa)

3 3/4"95.3mm

1/2" 12.7mm

1/8" 3.2mm

5/16" 7.9mm 1/2” ID & 13/16" OD

12.7mm ID & 20.6mm OD


648 1.21 lb/ft (1.80 kg/m) 100' (299 KPa)

7"177.8mm

1/2" 12.7mm

3/4" 19.1mm

1/8" 3.2mm

1 1/4" 31.8mm

9/16" 14.3mm

New York E

DUMBBELL CENTERBULB


753 3.10 lb/ft (4.61 kg/m) 150' (448 KPa)

9"228.6mm

3/8" 9.5mm

1" 25.4mm

3/4” ID & 1 1/2" OD 19.1mm ID & 38.1mm OD

C.O.E.

754 3.70 lb/ft (5.51 kg/m) 150' (448 KPa)

9" 228.6mm

15/16"23.8mm

3/8" 9.5mm

2” ID & 2 3/4" OD 50.8mm ID & 69.9mm OD

C.O.E.

756 1.20 lb/ft (1.79 kg/m) 100' (299 KPa)

6"152.4mm

3/8" 9.5mm

1/4" 6.4mm

3/4” ID & 1 1/8" OD 19.1mm ID & 28.6mm OD

757 1.41 lb/ft (2.10 kg/m) 100' (299 KPa)

6"152.4mm

5/8" 15.9mm

1/4" 6.4mm

3/4” ID & 1 1/8" OD 19.1mm ID & 28.6mm OD


758 2.06 lb/ft (3.06 kg/m) 125' (373 KPa)

9"228.6mm

1/2" 12.7mm

3/8" 9.5mm

3/8” ID & 3/4" OD 9.5mm ID & 19.1mm OD

933 2.87 lb/ft (4.27 kg/m) 150' (448 KPa)

230.0mm

25.0mm10.0mm

20.0mm ID & 35.0mm OD

936 1.71 lb/ft (2.54 kg/m) 125' (373 KPa)

20.0mm

260.0mm

10.0mm

5.0mm

13.0mm ID & 23mm OD

EYELET

BASE SEAL


771 1.53 lb/ft (2.28 kg/m) 100' (299 KPa)

9"228.6mm

2"50.8mm

3/4" 19.1mm

9/16" 14.3mm

5/32" 4.0mm


772 1.85 lb/ft (2.75 kg/m) 100' (299 KPa)

9"228.6mm

2"50.8mm 3/4"

19.1mm

9/16" 14.3mm 5/32"

4.0mm3/4"

19.1mmTexas Hwy

Type A



DESIGN AND SIZES


924 1.45 lb/ft (2.16 kg/m) 125' (373 KPa)

200.0mm

40.0mm16.0mm 20.0mm

4.5mm

3.0mm20.0mmTEAR WEB

925 1.84 lb/ft (2.74 kg/m) 150' (448 KPa)

TEAR WEB

250.0mm

25.0mm 50.0mm

5.0mm3.0mm

18.0mm

927 .89 lb/ft (1.32 kg/m) 75' (224 KPa)

150.0mm

20.0mm 3.0mm4.5mm

16.0mm 55.0mm

944 1.30 lb/ft (1.93 kg/m) 125' (373 KPa)

41.5mm

200.0mm

20.0mm

16.0mm

3.0mm4.5mm

959 1.41 lb/ft (2.10 kg/m) 150' (448 KPa)

250.0mm

50.0mm 15.0mm

4.0mm

25.0mm18.0mm

960 1.30 lb/ft (1.94 kg/m) 150' (448 KPa)

250.0mm4.0mm

50.0mm18.0mm 15.0mm

982 1.15 lb/ft (1.71 kg/m) 125' (373 KPa)

18.5mm3.9mm

195.0mm

990 6.81 lb/ft (10.14 kg/m)

65.0mm48.0mm

400.0mm

12.0mm

12.0mm


774 .79 lb/ft (1.18 kg/m) 75' (224 KPa)

7"177.8mm

1/8" 3.2mm

7/16" 11.1mm

7/16" 11.1mm

Texas HwyType B

775 4.64 lb/ft (6.91 kg/m)

8"203.2mm

3 1/2"88.9mm

9"228.6mm 5°3/4"

19.2mm1/2"

12.7mm

C.O.E.

776 .83 lb/ft (1.24 kg/m) 100' (299 KPa)

6"152.4mm

1 1/8" 28.6mm

1/2" 12.7mm

1/8" 3.2mm

9/16" 14.3mm

New York D

777 2.75 lb/ft (4.09 kg/m)

5/8" 15.9mm

17”431.8mm

7/8" 22.2mm

5/32" 4.0mm

787 1.81 lb/ft (2.69 kg/m)

420.0mm

3.5mm 4.0mm

27.9mm 8.0mm

3.0mm

914 1.61 lb/ft (2.40 kg/m) 125' (373 KPa)

7 13/16"198.4mm

1 5/16"33.3mm 3/4"

19.1mm1/8" 3.2mm

1 1/2"8.1mm 5/8"

15.9mm

923 1.02 lb/ft (1.51 kg/m) 75' (224 KPa)

TEAR WEB150.0mm

20.0mm

16.0mm

4.5mm

55.0mm

3.0mm

928 1.32 lb/ft (1.97 kg/m) 125' (373 KPa)

200.0mm

40.0mm

3.0mm

4.5mm20.0mm

16.0mm

929 1.68 lb/ft (2.49 kg/m) 150' (448 KPa)

250.0mm

18.0mm

5.0mm

50.0mm

25.0mm

3.0mm

930 2.04 lb/ft (3.04 kg/m) 175' (523 KPa)

18.0mm

5.0mm

50.0mm 95.0mm

330.0mm

25.0mm

3.0mm

931 1.81 lb/ft (2.69 kg/m)

125.0mm135.0mm

50.0mm

3.0mm

5.0mm

25.0mm 18.0mm

25.0mm

3.0mm

Retro�t

BASE SEAL/CONT’D


937 1.71 lb/ft (2.55 kg/m) 100' (299 KPa)

240.0mm

50.0mm

22.0mm 5.0mm15.0mm

938 1.85 lb/ft (2.76 kg/m) 100' (299 KPa)

5.0mm

50.0mm 25.0mm

240.0mm

15.0mm22.0mm

TEAR WEB

939 1.05 lb/ft (1.56 kg/m) 100' (299 KPa)

200.0mm

40.0mm 15.0mm20.0mm

3.5mm15.0mm

TEAR WEB


DESIGN AND SIZES

A NOTE ABOUT HEAD PRESSURE RATINGS:Head Pressure Ratings are based on parameters published in the Corps of Engineers document, Waterstops and Other Preformed Joint Materials for Civil Works Structures EM 1110-2-2101, dated 30 September 1995. Sample testing conducted by Sika® on select profiles has indicated a conservative tendency in these ratings. That said, the published Head Pressure Ratings should be considered to be ultimate values. An appropriate safety factor should be applied to these values. Contact a Sika Canada representative for more information.


639 1.03 lb/ft (1.53 kg/m) 100' (299 KPa)

6"152.4mm

1/8" 3.2mm

1/2" 12.7mm 1 3/16"

30.2mm 1 5/8"41.3mm

1/8" 3.2mm

652 5.00 lb/ft (7.44 kg/m)

10 1/4"260.4mm

1" 25.4mm

4" 101.6mm

3/8" 9.5mm

3/4" 19.1mm

1/8" 3.2mm

1/2" 12.7mm

CRACK INDUCERNO. STD. WT. HEAD PRESS.

806 5.00 lb/ft (7.44 kg/m)

8"203.2mm

1/2" 12.7mm

3/4"19.1mm 4 1/8"

104.8mm

1/8" 3.2mm

USBR

926 2.26 lb/ft (3.36 kg/m) 150' (448 KPa)

250.0mm

70.0mm 18.0mm

5.0mm

50.0mm

3.0mm

5.0mm

TEAR WEB


741 0.47 lb/ft (0.70 kg/m) 65' (194 KPa)

4"101.6mm

3/16" 4.8mm

3/8" 9.5mm

744 0.63 lb/ft (0.94 kg/m) 65' (194 KPa)

5"127.2mm

3/16" 4.8mm

15/32" 11.9mm

746 0.71 lb/ft (1.06 kg/m) 75' (224 KPa)

3/16" 4.8mm

6"152.4mm

3/8" 9.5mm

747 1.11 lb/ft (1.65 kg/m) 100' (299 KPa)

6"152.4mm

1/4" 6.4mm

5/8" 15.9mm

DUMBBELLNO. STD. WT. HEAD PRESS.

748 1.51 lb/ft (2.25 kg/m) 125' (373 KPa)

3/8" 9.5mm

6"152.4mm

3/4" 19.1mm

750 1.18 lb/ft (1.76 kg/m) 100' (299 KPa)

9"228.6mm

3/16" 4.8mm

9/16" 14.3mm

751 2.18 lb/ft (3.24 kg/m) 150' (448 KPa)

9"228.6mm

3/8" 9.5mm

3/4" 19.1mm

752 2.55 lb/ft (3.79 kg/m) 150' (448 KPa)

9"228.6mm

3/8" 9.5mm

1" 25.4mm


755 2.99 lb/ft (4.44 kg/m) 200' (598 KPa)

12”304.8mm

3/8" 9.5mm

13/16" 20.6mm

932 .66 lb/ft (3.97 kg/m) 150' (448 KPa)

230.0mm

10.0mm 25.0mm

934 1.58 lb/ft (2.36 kg/m) 125' (373 KPa)

20.0mm

250.0mmEYELET

10.0mm5.0mm



DESIGN AND SIZES

SPLIT FLANGE

LABYRINTH



653 2.25 lb/ft (3.35 kg/m) 150' (448 KPa)

9"228.6mm

3/8" 9.5mm

3/16" 4.8mm

3/4” ID & 1 1/8" OD 19.1mm ID & 28.6mm OD

720 1.20 lb/ft (1.79 kg/m) 100' (299 KPa)

3/16" 4.8mm

1/8" 3.2mm

9"228.6mm

3/32" 2.4mm

3/8” ID & 1/2" OD 9.5mm ID & 12.7mm OD

721 .50 lb/ft (.74 kg/m) 65' (194 KPa)

4"101.4mm

3/16" 4.8mm 3/32"

2.4mm

5/16” ID & 7/16" OD 7.9mm ID & 11.4mm OD

722 1.90 lb/ft (2.83 kg/m) 150' (448 KPa)

9"228.6mm

3/16" 4.8mm

3/8" 9.5mm

1/8" 3.2mm

3/8” ID & 3/4" OD 9.5mm ID & 19.1mm OD


789 .84 lb/ft (1.25 kg/m) 25' (75 KPa)

3/16" 4.8mm

3 1/4"82.6mm

1 5/8"41.3mm

1 3/16"30.2mm


723 .76 lb/ft (1.13 kg/m) 100' (299 KPa)

6"152.4mm

3/16" 4.8mm 3/32"

2.4mm

1/2” ID & 5/8" OD 12.7mm ID & 15.9mm OD

724 1.54 lb/ft (2.29 kg/m) 125' (373 KPa)

6"152.4mm

3/8" 9.5mm

3/16" 4.8mm

3.8” ID & 5/8" OD 9.5mm ID & 15.9mm OD

725 3.10 lb/ft (4.61 kg/m) 150' (448 KPa)

9"228.6mm

3/8" 9.5mm

3/4” ID & 1 1/2" OD 19.1mm ID & 38.1mm OD1”

25.4mm

727 2.25 lb/ft (3.35 kg/m) 150' (448 KPa)

9"228.6mm

3/8" 9.5mm

3/16" 4.8mm

3/8” ID & 5/8" OD 9.5mm ID & 15.9mm OD


730 1.02 lb/ft (1.52 kg/m) 100' (299 KPa)

6"152.4mm

3/16" 4.8mm

3/32" 2.4mm

13/16” ID & 1" OD 20.6mm ID & 25.4mm OD

759 1.49 lb/ft (2.22 kg/m) 125' (373 KPa)

6"152.4mm

3/8" 9.5mm

3/4" 19.1mm

760 2.20 lb/ft (3.27 kg/m) 150' (448 KPa)

9"228.6mm

3/4" 19.1mm 3/8"

9.5mm


790 1.24 lb/ft (1.85 kg/m) 50' (149 KPa)

4 7/16"112.7mm

1 5/8"41.3mm3/16"

4.8mm

1 3/16"30.2mm

807 2.00 lb/ft (2.98 kg/m) 50' (149 KPa)

4 7/16"112.7mm

2 5/16"58.7mm


830 1.81 lb/ft (2.69 kg/m) 50' (149 KPa)

6 1/4"158.8mm

1/4" 6.4mm

1/4" 6.4mm

1 5/8"41.3mm

835 1.80 lb/ft (2.68 kg/m) 50' (149 KPa)

6 1/4"158.8mm

3/16" 4.8mm

2 1/2"63.5mm

1 11/16"42.9mm


RETROFIT WATERSTOP SYSTEMS

Retrofit waterstops seal joints where new construction meets an existing structure and can be suitable for working joints. Systems include waterstop profile, stainless steel batten bars and anchor bolts. Epoxy 7300 is sold separately.

SPECIALTY SHAPES

NO. SYSTEM STD. WT. with hardware

581 1.51 lb/ft (2.25 kg/m)

EXISTING CONCRETE

NEW CONCRETE

S.S. BATTEN BARS.S. ANCHOR BOLT

EPOXY 7300

3 1/8"

7/16" 3 11/16"

609 2.92 lb/ft (4.35 kg/m)


EPOXY 7300EXISTING

CONCRETE

NEW CONCRETE

6"

3 3/16"

3/8"

1/2"

NO. SYSTEM STD. WT. with hardware

655 1.38 lb/ft (2.05 kg/m)

EXISTING CONCRETE

NEW CONCRETE


EPOXY7300

3"

7/16" 3"

667 8.27 lb/ft (12.31 kg/m)

EXISTING CONCRETE

EPOXY 7300

S.S. BATTEN BAR

S.S. ANCHOR BOLT

NEW CONCRETE

9"

6 3/8"

7/8"

11/16"




These shapes have been developed to meet unique requirements of clients or other specifying groups. Consult a Sika Canada representative for more information or for special applications.


770 3.15 lb/ft (4.69 kg/m)

300.0mm 20.0mm

87.0mm

220.0mm

6.0mm

3.0mm

52.0mm

57.0mm

791 0.86 lb/ft (1.28 kg/m) 35' (105 KPa)

5 1/4"133.4mm

1/8" 3.2mm

1/8" 3.2mm

2 1/8"54.0mm2 1/4"

57.1mm

792 1.10 lb/ft (1.63 kg/m) 35' (105 KPa)

3 1/8"79.4mm

5 1/4"133.4mm

1/8" 3.2mm

1/8" 3.2mm 2"

50.8mm

2 1/4"57.1mm

W1-2 Calif.


729 .64 lb/ft (.95 kg/m) 35' (105 KPa)

5"127.0mm

3/16" 4.8mm

1 1/2"38.1mm

3/32" 2.4mm

5” Mass.

762 1.51 lb/ft (2.25 kg/m) 100' (299 KPa)

127.0mm22.0mm

10.0mm 9.5mmSoil Conservation Service Type F

765 .64 lb/ft (.95 kg/m)

2 1/8"54.0mm

1/8" 3.2mm

4"101.6mm

3/16" 4.8mm

NO. STD. WT.

606 2.92 lb/ft (4.35 kg/m)

6"152.4mm

3 1/2"88.9mm

1/8"3.2mm

1/2" 12.7mm

1/2" 12.7mm

3/4" 19.1mm

5/16" ID & 15/16” OD 7.9mm ID & 23.8mm OD

650 .64 lb/ft (2.44 kg/m)

2 1/2"63.5mm

8"203.2mm

1/4" 6.4mm


SPLICING IRONS FOR FIELD WELDINGAs noted, a quality waterstop installation requires quality welds. Sika Splicing Irons are specifically designed for welding thermoplastic waterstop and are constructed of the highest quality components for superior and long lasting performance. No other means or methods can be used.Temperature controls are adjustable for various conditions and products. Irons are typically 120V operation, but 240V is available for the 213 and 214 irons.The 213 and 215 irons have an integral thermometer to display the iron temperature for accurate welding. The splicing iron should be large enough to melt the enire cross-section of the waterstop profile. All irons are supplied with a teflon coated cover necessary for welding. Replacement covers are available for purchase.

No. 214 2" x 14" Plate

TYPICAL PVC FABRICATIONSSika strongly recommends factory fabricated transitions and intersections. Typical fabrications for the most common shapes are inventoried by Sika and available to meet construction schedules. Sika can provide customized fabrications to suit unusual configurations or a convergence of differing profiles.

CHEMICAL RESISTANT WATERSTOP Sika® Greenstreak’s companion brand, Westec®, offers waterstop solutions for secondary containment in petrochemical and industrial applications. Westec® Envirostop™ TPE-R (Thermoplastic Elastomeric Rubber) Waterstops resist a wide range of oils, solvents, and aggressive chemicals. Alcohols, ketones, glycols, esters and aqueous solutions of acids, bases, and salts have little effect on Westec® Envirostop™ TPE-R Waterstop. TPE-R has excellent ozone resistance, low temperature flexibility, excellent high temperature (up to 120 °C [250 °F]) performance and is heat weldable. Westec® Envirostop™ TPE-R Waterstop can also be defined as a Thermoplastic Vulcanizate, TPV.

Westec® Envirostop™ TPE-R Waterstop is certified to NSF/ANSI Standard 61 for Drinking Water System Components. Contact a Sika Canada representative or visit www.Chemstop.com for more information.

No. 213 4 ½" x 14" Plate

No. 215 9" x 9" Plate

Vertical L, T, and Cross Fabrications Flat L, T, and Cross Fabrications

FABRICATIONS/SPLICING IRONS



No. 215 9" x 9" Plate

Sika offers SikaFuko® VT injection hose, the world's number one injection hose system. SikaFuko® VT systems are available in two sizes and can deliver Portland cement, microfine cement, or a variety of resins to seal cracks or voids in the joint area. SikaFuko® VT has a unique "re-injectable" design, which allows the hose to be cleaned. This key feature allows for a complete maintenance program if leaks appear and future re-injections are required.SikaFuko® Eco 1 (formerly Duroject) is an injection hose for delivering cements or resins for planned sealing of construction joints. It is for single injection applications. Sika offers a variety of injection materials for SikaFuko® VT injection hose systems.

Hydrotite is a world renowned hydrophilic waterstop. Composed of modified chloroprene rubber protected with a special delay coating, Hydrotite expands when exposed to water, creating an effective compression seal within joints where limited movement will occur.

Hydrotite is used extensively in sealing concrete construction joints, pipe penetrations, precast concrete segments, tunnel lining segments and for repair of existing joints or retrofit applications. Several shapes and sizes are available.

SikaSwell®-A (formerly Duroseal Gasket) is a water-swelling acrylate-ester that expands upon contact with water to form a compression seal in nonmoving concrete joints. SikaSwell®-A is a available in three sizes and is adhered to varying substrates with Sika® MK Adhesive or Quellpaste Type E.

Sika® Swellstop® is a flexible butyl rubber and swellable clay waterproofing compound that expands upon contact with water to form a compression seal in nonmoving concrete joints. Swellstop® is available in two sizes and must be used in conjunction with Swellstop Primer Adhesive to create a watertight bond.

HYDROPHILIC WATERSTOPS SOLUTIONS FOR APPLICATIONS WHERE EXPOSURE TO MOISTURE IS CONSTANT.

Lockstop is a single component and self-sealing mastic waterstop which bonds to concrete to prevent moisture from penetrating nonmoving joints. Lockstop must be used in conjunction with Lockstop Primer Adhesive to create a watertight bond.

MOST STRIP-APPLIED WATERSTOPS AND INJECTION HOSE SYSTEMS ARE SUITABLE FOR NONWORKING JOINTS ONLY.

STRIP-APPLIED WATERSTOPS AND INJECTION HOSE SYSTEMS

The Information, and in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika’s current knowledge and experience of the products when properly stored, handled and applied under normal conditions, within their shelflife. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any recommendations, or from any other advice offered. The information contained herein does not relieve the user of the products from testing them for the intended application and purpose. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request or may be downloaded from our website at: www.sika.ca

SIKA CANADA INC.Head Office601, avenue DelmarPointe-Claire, Quebec H9R 4A9

Other locationsTorontoEdmontonVancouver

An ISO 9001 certified companyPointe-Claire: ISO 14001 certified EMS

© S

ika

Cana

da In

c./S

ika®

Gre

enst

reak

Wat

erst

ops/

07.

2015

/ar

SIKA SOLUTIONS FROM ROOF TO FOUNDATIONS

CONCRETE ACCESSORIESSika® HydrotiteHYDROPHILIC WATERSTOPS

UNIQUE WATERPROOFING SOLUTIONS FOR CONSTRUCTION JOINTS

WATERPROOFINGSikaFuko® INJECTION HOSE SYSTEMS

Greenstreak

SikaProof® A Waterproofing Membrane System

Also Available:

Joint Sealing

Sikaflex®Sikasil® Sikadur® Combiflex

Grouting and Anchoring

SikaGrout®Sikadur®Sika AnchorFix®

Roofing Systems

Sarnafil®Sikaplan®Sikalastic®

Concrete Production

Sika® ViscoCrete®SikaRapid® Sika® Air

Waterproofing Systems

SikaProof®, SikaFuko®Sika® Greenstreak®SikaSwell®, SikaFix®

Floor & Wall Systems

Sikafloor® Sikagard® Sikagard® Duroplast

Concrete Repair & Protection

Sika® MonoTop®SikaTop®, SikaRepair® Sikagard®

Structural Strengthening

Sikadur®, Sika® CarboDur®SikaWrap®Sika® CarboShear

Sika Canada Inc., a member of the Sika Group, is a leader in the field of speciality chemicals, for construction and manufacturing industries. Our product lines feature high quality roofing systems, concrete admixtures, mortars and resins, sealants and adhesives, structural strengthening components, industrial and decorative flooring, as well as protective coatings and waterproofing systems. Our expertise is borne out of a global presence and served by strong, local support. Sika has earned the trust of our industries for over 100 years, by delivering the highest standards of commitment and partnership.

CONCRETE ACCESSORIESSika® Westec® BARRIER TECHNOLOGIESWATERSTOPS FOR INDUSTRIAL APPLICATIONS

1-800-933-SIKAw w w . s i k a . c a

CONCRETE ACCESSORIES Sika® Greenstreak WATERSTOPS

Documents

Transcript of CONCRETE ACCESSORIES Sika® Greenstreak WATERSTOPS