PCC-5310 - Pliers 6Apdfs.findtheneedle.co.uk/13011..pdf · The PCC-5310 - Pliers 6A is a precision,...
Transcript of PCC-5310 - Pliers 6Apdfs.findtheneedle.co.uk/13011..pdf · The PCC-5310 - Pliers 6A is a precision,...
2 www.greenwoodscomms.com
PCC-5310 - Pliers 6AThe PCC-5310 - Pliers 6A is a precision, ratchet crimp tool designed to provide consistent andreliable crimp connections on coaxial connectors.
Technical data
Product code: PCC-5310
Length: 200mm / 7.87"
Height: 164mm / 6.46"
Weight: 530g / 1.17 lbs
Connector: Coaxial
• Symmetric dies for right and left handed operation
• Ergonomic handles for low effort crimping
• Ratchet action to ensure full crimp cycle with safety release
• Durable - minimum of 50,000 cycles
• Tool is factory set with a precise eccentric cam adjustment function to guarantee performance
Description GreenwoodsPart Number
Ratchet Crimp Tool, Pliers 6A 55AR0001
PCC-5310 Crimp Tool
Description GreenwoodsPart Number
Tool Case for PCC-5310, 4 die sets 2 gauges & MH800 (GB109) 55AR0111
Tool Case for PCC-5310 & 6 die sets 55AR0112
Tool Cases
Description GreenwoodsPart Number
Main Spring (frame) 55AR0010
Pawl Spring (handle) 55AR0011
Spares
Model BT Inner hex A/F (mm); (inches) Outer hex A/F (mm); (inches) GreenwoodsReference nominal figures only nominal figures only Part Number
PCC5310/01 VA 1.46; 0.057 2.67; 0.105 55AR0061
MRP6004 PCC5310/02 VB 1.46; 0.057 3.25; 0.130 55AR0054
MRP6005 PCC5310/03 VC 1.46; 0.057 4.52; 0.178 55AR0055
MRP6159 PCC5310/13 VG 1.46; 0.057 8.23; 0.329 55AR0088
MRP6006 PCC5310/06 VQ 1.46; 0.057 5.18; 0.207 55AR0052
MRP6007 PCC5310/07 VR 1.46; 0.057 6.81; 0.272 55AR0053
MRP6133 PCC5310/09 WB 1.69; 0.067 3.25; 0.130 55AR0062
MRP6127 PCC5310/10 WC 1.69; 0.067 4.52; 0.180 55AR0059
MRP6102 PCC5310/11 WD 1.69; 0.067 5.41; 0.216 55AR0057
MRP6100 PCC5310/12 WE 1.69; 0.067 6.48; 0.259 55AR0083
MRP6130 WF 1.69; 0.067 7.01; 0.280 55AR0051
MRP6120 WG 1.69; 0.067 8.23; 0.329 55AR0087
MRP6211 - 4.30; 0.172 55AR0056
MRP6101 2.57; 0.102 10.90; 0.429 55AR0085
Die Sets
3(e) [email protected] (t) +44 (0)845 226 2327
defining excellence in global network solutions
K-Type Hand Crimping ToolThe K-Type crimp tool has been specially designed for it’s small size and light weight. It will installan extensive range of insulated and uninsulated solderless terminals, cable lugs and connectorsup to 6mm (sq - number ‘2’) conductor size. It will also serve to crimp contact pins, inner contactsand outer ferrules of coaxial connectors and other wiring devices
Technical data
Model: 29021
Length: 265mm / 10.43”
Head Width: 45mm / 1.77”
Weight: 750g / 1.65 lbs
Connector: BNC & TNC
Description Model BS Reference GreenwoodsReference Part Number
K-Type Hand Crimping Tool 29061 BS5310 Part 2A 55CC0001
K-Type Crimp Tool
Description Model Inner hex A/F (mm); (inches) Outer hex A/F (mm); (inches) GreenwoodsReference nominal figures only nominal figures only Part Number
Die Set for BS5310 29261 - 3.25; 0.138 55CC0005
Die Set for BS5310 29330 - 3.84; 0.151 55AR0060
Die Sets
4 www.greenwoodscomms.com
M22520/10-01 (HX3)The M22520/10-01 is an open frame crimp tool designed to feature a system of interchangeabledies which eliminate the need of separate fixed die crimp tools for each different application
Description Model GreenwoodsPart Number
HX3 Crimp Tool M22520/10-01 55AR0002
HX3 Crimp Tool
Description Model GreenwoodsPart Number
Test Gauge RG179 for X118 MRP0295 55AR0204
Test Gauge BT3002 for X259 MRP0202 55AR0205
Test Gauge BT2002 for X260 MRP0203 55AR0202
Test Gauge BT2003 for X261 MRP0204 55AR0203
Gauges
Description GreenwoodsPart Number
Tool case (blue) for HX3, 2 die sets, 1 gauge & MH800 (GB109) 55AR0109
Tool case (black) for HX3, 2 die sets, 1 gauge & MH800 (GB109) 55AR0110
Tool Cases
Description Model Inner hex A/F (mm); (inches) Outer hex A/F (mm); (inches) Greenwoodsnominal figures only nominal figures only Part Number
Die Set RG179 X118 - 3.25; 0.128 55AR0076
Die Set RG223 X144 - 5.41; 0.213 55AR0074
X161 1.46; 0.057 4.57; 0.180 55AR0077
X163 1.46; 0.057 7.72; 0.304 55AR0078
Die Set BT3002 X259 - 4.52; 0.178 55AR0075
Die Set BT2002 X260 - 5.18; 0.204 55AR0072
Die Set BT2003 X261 - 6.81; 0.256 55AR0073
Die Sets
Technical data
Product code: M22520/10-01
Length: 229mm / 9”
Weight: 312g / 0.69 lbs
Height: 38mm / 1.5”
Width: 20mm / 0.8”
Connector: Coaxial &
Tri-axial
5(e) [email protected] (t) +44 (0)1675 463131
M22520/5-01 (HX4)
Description Model GreenwoodsPart Number
HX4 Crimp Tool M22520/5-01 55AR0003
HX4 Crimp Tool
The M22520/5-01 is an open frame hand crimp tool designed to crimp various sizes and types offerrules, coaxial connectors, contacts, splices and terminal lugs to cables and wires.
Technical data
Product code: M22520/5-01
Length: 279mm / 11”
Weight: 595g / 1.31 lbs
Connector: Coaxial &
Tri-axial
Description Model Inner A/F (mm); (inches) Outer A/F (mm); (inches) Greenwoodsnominal figures only nominal figures only Part Number
Die Set Y1601 4.27; 0.168 6.50; 0.256 55AR0090
Die Set 11W 150-403 0.73; 0.028 3.63; 0.143 55AR0058
Die Sets
6 www.greenwoodscomms.com
M22520/1-01 (AF8)
Description Model GreenwoodsPart Number
AF8 M22520/1-01 55AR0023
TH1A Turret M22520/1-02 55AR0025
TH4 Turret M22520/1-03 55AR0405
* additional turrets are available for military standard and commercial contacts
AF8 Crimp Tool
Technical data
Product code: M22520/1-01
Length: 248mm / 9.75”
Height: 170mm / 6.69”
Weight: 425g / 0.94 lbs
Connector: Circular /
Rectangular
The M22520/1-01 is an adjustable precision ratchet crimp tool designed to provide consistant andreliable crimping of contact crimp barrels
Easy to use
• Attach the turret head to the tool frame
• Select colour coded contact locator
• Dial the wire size step setting
• Insert the contact and prepared wire through the indenter opening into the turret. Squeeze the handles together untilratchet releases and the handle will return to the open position.
Description Model GreenwoodsPart Number
G125 Gauge M22520/3-01 55AR0407
Gauge
7(e) [email protected] (t) +44 (0)1675 463131
defining excellence in global network solutions
M22520/2-01 (AFM8)
Description Model GreenwoodsPart Number
AFM8 M22520/2-01 55AR0022
M22520/2-01 (AFM8) Crimp Tool
Description / Typical Application Model GreenwoodsPart Number
Positioner 1.0/2.3 K1057 55AR0305
Positioner 1.6/5.6 K1166 / T4831 55AR0307
Positioner RA7000 BNC K1388 / T4868 55AR0310
Positioner SMB K1247S 55AR0314
Positioner BNC Jack K1479 55AR0320
Positioner 1.0/2.3 B/H K1480 55AR0322
Positioner M4 Female K998-1 55AR0328
Positioner M4 Male K970 55AR0324
Positioner 1.0/2.3 K1335 / T4852 55AR0312
Positioners
Description Model GreenwoodsPart Number
G125 Gauge M22520/3-01 55AR0407
Gauge
Technical data
Product Code: M22520/2-01
Length: 171mm / 6.75”
Height: 110mm / 4.33”
Weight: 425g / 0.94 lbs
Connector: Coaxial, Circular /
Rectangular
The M22520/2-01 is a minature adjustable crimp tool designed for most of the minature and sub-minature connector types
Easy to use
Insert the contact and prepared wire through the indenter
opening the turret into position. Squeeze the handles
together until ratchet releases and the handle will return to
the open position.
8 www.greenwoodscomms.com
MH800 (GB109) - Pliers 19A
BT Reference Model GreenwoodsPart Number
Pliers 19A MH800 (GB109) 55AR0021
MH800 (GB109) - Pliers 19A Crimp Tool
Technical data
Product Code: MH800 (GB109) - Pliers 19A
Length: 190mm / 7.48”
Height: 30mm / 1.18”
Weight: 344.7g / 0.76 lbs
Connector: Coaxial
The MH800 (GB109) Pliers 19A is an ultra precision crimp tool designed for Type 43, HDC43,UHDC43 & Type 54 inner coaxial contacts
Description Model GreenwoodsPart Number
Gauge for MH800 (GB109) MRP0231 55AR0251
Gauge
9(e) [email protected] (t) +44 (0)1675 463131
defining excellence in global network solutions
Description GreenwoodsPart Number
DCC-0908 for SMA, SMB & SMC coaxial connectors, 55AR0007
RG174 & RG179
DCC-1113 for BNC & TNC coaxial connectors, 55AR0005
RG58, RG59, RG62 & Thinnet
DCC-2124 for 1.0-2.3, 1.6-5.6 coaxial connectors, 55AR0006
ST212 & ST214
0.70 1.20 1.69 3.25 3.80 4.52 5.41 6.48 6.80
DCCThe Pressmaster DCC range are precision, ratchet crimp tool designed to provide consistent andreliable crimp connections.
Technical data
Length: 198mm / 7.80"
Height: 65mm / 2.56"
Weight: 350g / 0.77 lbs
Connector: Coaxial
• Symmetric dies for right and left handed operation
• Ergonomic handles for low effort crimping
• Ratchet action to ensure full crimp cycle with safety release
• Durable – minimum of 50,000 cycles
• Tool is factory set with a precise eccentric cam adjustment function to guarantee performance
Cavity Size A/F (mm)
Crimp Tool
10 www.greenwoodscomms.com
Cavity Size A/F (mm)
0.71
0.99
1.07
1.19
1.72
1.98
2.54
3.25
3.84
4.52
5.41
6.48
6.50
6.65
8.23
9.14
10.9
0
Ratchet Crimp Tool
Ratchet ToolsThis range of ratchet crimp tools provide a professional crimp termination with the convenienceof multiple cavities in a single tool. On tool adjustments allow for an adjustable crimp pressure.
Technical data
Length: 220mm / 8.7”
Weight: 483g / 1.06 lbs
Connector:
Coaxial: F-Type
Fibre: SMA, SMB, SMC, MCX
4.75
Model GreenwoodsPart Number
HT-336A 55AR0040
HT-336P1 55AR0041
HT-336T 55AR0042
HT-336J 55AR0018
HT-336K 55AR0043
HT-336C2 55AR0044
HT-336A4 55AR0045
30-502 55AR0030
11(e) [email protected] (t) +44 (0)1675 463131
defining excellence in global network solutions
CMC ToolsThe CM Coax range of ratchet crimp tools provide a professional and reliable crimp every time.
Technical data
Product code: CMC.702/XX
Length: 210mm / 8.26"
Weight: 450g / 0.99 lbs
Crimp Tool
Cavity Size A/F (mm)
Model GreenwoodsPart Number
CMC.702/03 55AR0016
CMC.702/04 55AR0012
CMC.702/05 55AR0009
CMC.702/09 55AR0008
CMC.702/11 55AR0013
CMC.702/12 55AR0015
CMC.702/13 55AR0014
CMC.702/17 55AR0017
CMC.702/19 55AR0019
CMC.702/26 55AR0026
0.70 1.20 1.70 3.25 3.80 4.06 4.52 5.41 6.48 6.80
0.70
1.07
1.09
1.73
1.09
1.73
2.03
2.54
2.67
3.00
3.10
3.25
3.84
4.52
4.75
5.41
6.48
8.10
8.23
10.9
0
Cavity Size A/F (mm)
12 www.greenwoodscomms.com
Ace-toolThe Amphenol Ace-tool provides consistant and a reliable crimp each and every time, therebyinsuring the integrity of the connector termination.
Technical data
Product code: Ace Tool
Length: 220mm / 8.66”
Height: 70mm / 2.75”
Weight: 518g / 1.14 lbs
Crimp Tool
Description GreenwoodsPart Number
Ace-tool 1 55CU0010
Ace-tool 2 55CU0012
Ace-tool 3 55CU0003
Ace-tool 4 55CU0004
Ace-tool 5 55CU0005
Ace-tool 6 55CU0002
Ace-tool 7 55CU0007
Ace-tool 8 55CU0008
Ace-tool 9 55CU0009
13(e) [email protected] (t) +44 (0)1675 463131
defining excellence in global network solutions
Non-Ratchet ToolsThis is a non-ratchet unchangeable riveted crimp tool designed for use on both coaxial and fibreconnector types
Technical data
Length: 229mm / 9”
Height: 88mm / 3.46”
Weight: 678g / 1.49 lbs
Connector:
Coaxial: F-Type, N-Type, BNC,
TNC, UHF
Fibre: ST, SC, SMA
Cavity Size A/F (mm)
1.92
Non-ratchet Crimp Tool
2.54 8.20 8.60 9.10 10.30 11.40 11.95Description Greenwoods
Part Number
HT-106G 55AR0032
HT-106L 55AR0033
HT-106Q 55AR0034
HT-106X 55AR0035
14 www.greenwoodscomms.com
Part Number Page
55CC0001 355CC0005 355CU0002 1255CU0003 1255CU0004 1255CU0005 1255CU0007 1255CU0008 1255CU0009 1255CU0010 1255CU0012 1255AR0001 255AR0002 455AR0003 555AR0005 955AR0006 955AR0007 955AR0008 1155AR0009 1155AR0010 255AR0011 255AR0013 1155AR0012 1155AR0014 1155AR0015 1155AR0016 1155AR0017 1155AR0018 1055AR0019 1155AR0021 855AR0022 755AR0023 655AR0026 1155AR0030 1055AR0032 1355AR0033 1355AR0034 1355AR0035 1355AR0040 1055AR0041 1055AR0042 1055AR0043 1055AR0044 1055AR0045 10
55AR0051 255AR0052 255AR0053 255AR0054 255AR0055 255AR0056 255AR0057 255AR0058 555AR0059 255AR0060 355AR0062 255AR0072 455AR0073 455AR0074 455AR0076 455AR0077 455AR0078 455AR0075 455AR0083 255AR0085 255AR0087 255AR0088 255AR0090 555AR0109 455AR0110 455AR0111 255AR0112 255AR0202 455AR0203 455AR0204 455AR0205 455AR0251 855AR0305 755AR0307 755AR0310 755AR0312 755AR0314 755AR0320 755AR0322 755AR0324 755AR0328 755AR0405 655AR0407 6 & 7
15(e) [email protected] (t) +44 (0)1675 463131
defining excellence in global network solutions
GREENWOODS COMMUNICATIONS EXTENSIVE RANGE OF PRODUCTS INCLUDES:
CONNECTORSType 43, HDC43, UHDC43, 1.6/5.6, 1.0/2.3, D-Type, 75-120Ω
Baluns, Power, RJ45
KRONE INTERCONNECT SYSTEMThe industry recognised interconnect system
DIGITAL DISTRIBUTION SYSTEMSStandard BT43, HDC43, UHDC43, 1.6/5.6, 1.0/2.3, IDC
CABLE75Ω Coax, Twisted Pair, 120Ω, Power, Belden, Data
STRUCTURED CABLINGFace Plates, Patch Panels, Cable, Adaptors, Patchcords,
Connectors, Modules
RACKS AND CABINETS19” Racks/Cabinets, ETSI Frames, TEP-1E Rack, Rack 91,
Multi-Practice Racks
INSTALLATION MATERIALSTrunking, Unistrut, Conduit, Fibre Optic Ducting, Cable Trays,
Basket Mesh, etc.
INSTALLATION SERVICESSkilled engineers to carry out telecommunications installation
and commissioning
ACCESSORIES AND TOOLINGA full range to support all of the above
PROTECTIVE WORKWEARQuality range of protective clothing and safety equipment
defining excellence in global network solutions
005/0107
Information provided in this document is based on our general experience. However, because of the various factors which can affect product performance, no warranty is given nor is to be implied.
Users should make their own enquiries as to the suitability of the product for any particular application. All photographs and artwork © Greenwoods Communications Ltd, March 2004.
UK: Jeynes House Highway Point Gorsey Lane Coleshill Birmingham B46 1JU UK
(t): + 44 (0)845 226 2327 (f): + 44 (0)845 226 2328 [email protected]